Security setup for /SAPAPO/MC62 transaction

Hi,
Did anyone know what authorizations are required to execute /SAPAPO/MC62 transaction ? Users were able to access to the transaction and display the CVC's. But, when they want to create the new CVC's or delete them, they can't. Any idea ?
Thank you in advance for your help
Paranee

Hi,
I tried that but didn't work. I checked OSS note 646524. It looks like I need to set authorizations for repairing the index, which I couldn't find authorization object for that. I even copy the role from a person who had the right authorization to maintain /SAPAPO/MC62 but it still doesn't since planning area assignment is different. Don't know what to do....
Thanks,

Similar Messages

Best security setup for my Belkin 54g

I just purchased a Belkin 54g router. I understand a little about security settings but givin the options I wonder the best for simple home (apartment) use? I don't want to go overboard with settings but wonder which are the most commonly used. I don't feel that I have a security problem but I do see other wireless routers on my iPhone. I just want to lock mine. Password? WEP or WPA or WPA2? Mac address maybe?

Between WEP and WPA2 Personal, WPA2 personal is much more secure than WEP which the iPhone is compatible with. I use WPA2 Personal with my wireless router and network at home with no problems and living in an apartment complex you should be concerned about this but WPA2 should be plenty adequate.
I had a friend visit with a Windows PC and wireless card which was not compatible with WPA2 encryption so I was forced to downgrade my encryption to WEP in order for my friend's PC to be able to connect to my wireless network but any Mac should not have a problem with this.

I just installed version 7 of Firefox and afterwards it told me my security module for my firm's bank account was disabled. Now I can't access my account and the bank is in Brazil. I MUST make transactions from the US. How can I go back?

I just intalled version 7 of firefox and afterwards it told me it had disabled a security module for access to my bank account. The account and my company are in Brazil and I am in the US. I must have access to perform transactions. Had the program warned me I would not have "upgraded". To reinstall the security module I must be physically in Brazil because a code is text messaged to my local cell phone as one of the securty precautions and I am in the US and Europe for t3 to 4 weeks. I need to make a wire transfer during that time and cannot do so now. How can I go back to the old version and recover the bank access? Thank you.

You can download last Firefox 6 version from [http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-6.0/ Here]
Regards

An Invalid Setup has been detected for the current Transaction Type in AME

Gurus,
I am constantly getting an error An Invalid Setup has been detected for the current Transaction Type in Approvals Management
My client have 3 units say A,B,C. A requirement is such that whenever a vacancy is created, an approval should be sought from units HR manager.
I have created a dynamic query for this and it is working fine for first two units say A & B. i.e. whenever somebody from unit A or B creates a vacancy it is correctly fetching the
respective units managers. But, this whole AME is not working for unit C. An error pops out which says *An Invalid Setup has been detected for the current Transaction Type in
Approvals Management* . Can anybody tell me what can be the issue?
Edited by: 919527 on Aug 8, 2012 12:40 AM
Edited by: 919527 on Aug 8, 2012 12:41 AM

Solved it. The cursor wsa fetching two rows in plcae of one.

What is B2B setup for grouping transaction sets based on criteria.

Hi,
Oracle B2B offers a time bound Batching feature . However to handle following case such as Batching based on Order Number it is required to define the criterion.
Could you please provide the information on B2B Setup for grouping transactionsets based on input parameter(Invoice id OR Invoice Number or Payment ID ) passing from back end application(BPEL) to B2B.
For count based batching , my understanding is need to pass information in the format " <BatchMode>:<BatchID>:<Count>:<timeout>:" by parameters delivered with the IP_MESSAGE_TYPE construct. Which paramter of IP_MESSAGE_TYPE construct I have to use for passing the values to B2B in the format " <BatchMode>:<BatchID>:<Count>:<timeout>:"
I am unable to find Action name attribute of IP_MESSAGE_TYPE construct to pass the values. Please provide the required information.
Thanks&Regards,
Sridhar.Rachumallu.
Edited by: sridhar.rachumallu on Sep 7, 2010 11:06 AM

Hi Anuj,
Thanks for the information.
ACTION_NAME attribute is not available with SCA. Three channels (Default,AQ,JMS ) are provided in B2B adapter for connecting to B2B. Which one supports action_name attribute?
Design Time:
Presently by using 'Default' channel of B2B adapter i am connecting to B2B. I am unable to pass the value for b2b property "ACTION_NAME" because invoke activity does not has respective sca normalized message propertie "b2b.actionName". So i am adding input property tab in .bpel file under corresponding B2B Adapter invoke tag as given below.
<invoke name="Invoke_Put3070EDI820"
inputVariable="Put3070EDI820_InVar"
partnerLink="Put3070EDI820"
portType="ns1:B2B_send_ptt" operation="send">
<bpelx:inputProperty name="b2b.toTradingPartnerId"
variable="Variable_TargetTPartner"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerId"
variable="Variable_SourceTPartner"/>
<bpelx:inputProperty name="b2b.documentTypeName"
variable="Variable_TransactionSet"/>
<bpelx:inputProperty name="b2b.documentProtocolVersion"
variable="Variable_EDIVersionNo"/>
*<bpelx:inputProperty name="b2b.actionName"*
variable="Var_B2Baction"/>+
</invoke>
Defined variable ' Var_B2Baction' as string and assigned the expression as "concat('D:',bpws:getVariableData('Var_B2BBatchID'),':2:60')" and composite instance id expression "ora:getCompositeInstanceId()"mapped to 'Var_B2BBatchID' in BPEL.
Run time :
In application message of B2B coming the value as "b2b.actionName=D:608469:2:60". Here count coming as 2 but B2B is not grouping 2 transaction sets.Creating one EDI file for one transaction set.
Why B2B is not considering incoming value "b2b.actionName=D:608469:2:60" for batching the transaction sets.
Please suggest me the correct approach if i am wrong.
Thanks&Regards,
Sridhar.Rachumallu
Edited by: sridhar.rachumallu on Sep 8, 2010 4:24 AM
Edited by: sridhar.rachumallu on Sep 8, 2010 4:25 AM
Edited by: sridhar.rachumallu on Sep 8, 2010 4:27 AM
Edited by: sridhar.rachumallu on Sep 8, 2010 4:27 AM

Setups for Security

Three questions here. My iMac sits at home. No one else has access to it. And I am retired. Please tell me about these options in the Security Preferences screen.
Firewall. Does the average person need this activated?
Firevault. Is this necessary for all?
I don't have the Missing Manual for Mavericks yet. So I often look up topics in the MM for Lion. He mentions something on page 510 about "closing the backdoor" so hackers can't 'Ping" an idle or sleeping computer. The Security Preferences in Mavericks don't seem to address this. Has the new OS got built-in security for this.
Wiping an HD clean, installing fresh OS and then restoring preferences from a TImeMachine backup.
I was getting some odd behavior on my HD that DiskWarrior detected. From the error messages, the Alsoft (DW company) support people suggested I erase the HD and install a new system. And to be sure, wipe the HD clean first. I posted about this before, and the kind people on this forum agreed. I wonder, though, would it be save to Restore my old Network and Kechains and System Preferences from my TM backup?

I'll weigh in on this:
1. You don't need a firewall if you use a hardware router with its own built-in firewall.
2. You have no real need for FileVault unless you require military level security.
3. Do have a strong log-in password for your Admin account. Be sure to write it down somewhere safe.
4. Be sure you use strong passwords for any sites you use that require logins; especially ones where you purchase things.
5. Don't do your banking online or pay bills online. These places have security systems too easily cracked.
6. Use a credit card as infrequently as possible. Your financial information is not available on cash.
7. If you are behind a good router you should not have problems with hackers. If you use wireless, then be sure to activate security in the router to prevent others from accessing your network.
8. Pinging your backdoor can be blocked by using the firewall, but I don't think you have much to fear here. Only experienced hackers even know what that is. And, who wants your information? Unless you have millions in cash available, hackers aren't interested in you or your bank accounts. I haven't used any of these advanced security setups in 30 plus years of computing - I'm 72 and retired. I don't even both with anti-malware software
9. It's safe to restore your old keychain as long as you know you haven't permitted anything you'd be worried about. Network and system preferences should be no problem.

Ideal setup for a home security lab?

Hi!!
I am focussing on getting a home lab setup for practising cisco Security. Can some one suggest me some network devices that i can buy.. I am getting the following
2 Cisco 1741 Routers
1 2950 Switch
2 Cisco 501 PIX
Do you think I can setup a good with the following equipments?
Thanks
Shyam

Hello,
The following is listed for the the CCIE Security lab:
http://www.cisco.com/web/learning/le3/ccie/security/lab_equipment.html
* Cisco 2600 Series Routers
* Cisco 3600 Series Routers
* Cisco 3700 Series Routers
* Cisco Catalyst 3550 Series Switches
* Cisco PIX 500 Series Security Appliances
* Cisco VPN 3000 Series Concentrators
* Cisco IPS Series 4200 intrusion prevention system sensors
* Cisco Secure Access Control Server for Windows
* Certificate Authority Support
* Cisco ASA 5500 Series Adaptive Security Appliances*
I would 'aim' for that. Also go in the link and see the relevant code levels you should be working with.
--Jason

Enable Secure communication for RFC destinations by using sm59 transaction

Dear friends,
We would like to enable secure communications for RFC destinations by using the sm59 transaction in our systems.
We need to do this manually, by changing the internal communication settings in a way they can communicate securely.
Any idea or advice on the way it can be done ?
We need to take each RFC, manually check it and secure it.
Thanks in advance,
Jordan

In SM59 open up a RFC destination and go to Logon & Security. There you can enable Trusted relashionship and activate status of secure protocol.
And yes you have to do it manually for the desired RFC's

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet.

How i setup a security email for my apple id

i forgot my security questions and i have no security email too. i need help that how i could create a security email for my apple id to reset my security questions.

If you know the answers to your security questions then follow the instructions on the HT5312 page that you posted from :
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
Once you've finished editing your rescue email address, click the Save button directly below the email field
If you can't remember your answers then you will need to contact iTunes Support / Apple in your country to get the questions reset, and you can then use the above steps for potential future use.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

Unable to find security data for sender

Hello, does anybody know what this message means. The problem appear when I send an Idoc to XI. Other interfaces (Master data) are working properly. My question is, do I need to make some extra settings for the transactional data interfaces (SHPMNT)?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages" p2="VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries" p3="" p4="">PHYROU.UNDEFINED_SECURITY</SAP:Code>
<SAP:Text language="EN">Technical routing: Unable to find security data for sender sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages for receiver VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries</SAP:Text>
</SAP:ErrorHeader>
regards
Ernesto Duran

HI,
i am also getting the same error in my scenario. Could u plz inform me what is the solution?
Rgds,
Ram Sri

SSL Certificate setup for Web/Address Book/iCal in 10.7 Lion?

I know nothing about certificates. I plan to use my Mini server to help manage my family's computers which are pretty spread out across the U.S. My plan is to use profile manager for device management, host a couple websites (one secure for home security cams) and share address books and calendars. This is as much a geek gadget project as it is "useful" so I understand I may be creating some work for myself
Anyway, can someone walk me through the correct setup for certificates? My research is showing me a LOT of options/parameters. Due to the expense, i don't want to create one just to find it won't serve my purposes.
Also, I think i'm going with RapidSSL...$50 is the cheapest I've come across...hopefully the offer what I need?

I have just spent 30 minutes on the phone to a pleseant chap in Athens, and now have a solution.
We tried several options and the final one worked - so simple.
Click on the apple symbol > system preferences > iCloud > disable contact sync > keep contacts
Check search, in my case it worked for the first time in several weeks :-)
then re-enable contact sync as follows:
Click on the apple symbol > system preferences > iCloud > re-tick contacts > merge contacts
Search still works
Hallelujah!

Office 2013 RMS Client Configuration - Your Machine is not setup for IRM

Hi All,
I have successfully setup a test AD RMS farm but stuck at trying to configure Office 2013 to work with this. The farm configuration is as below
DC: Windows 2003
AD RMS Server: Windows 2008/ SQL Server 2008 R2
Client: Windows 7 64 bit with Office 2013 32 bit, Domain Joined
Client is domain joined and SCP has been successfully registered ( I can see the SCP in AD RMS properties).
When I open word and select Protect Document -> Restrict Access, the only option is to Connect to RMS Server and get template, which eventually gives an error
Your Machine isn't setup for Information Rights Management (IRM). To set up IRM, sign in to office, open an existing IRM protected message or document, or contact your help desk.
Surprisingly, when I open a document protected by IRM (from a different machine), IRM is automatically configured for the user and starts working from that point. However any new domain user login into this client faces the same issue.
Can anyone help identify the required registry keys that need to be present for getting this working on the client.
Thanks for your help
Anuj

Hi Manoj,
To install Microsoft Deployment Agent, you must be a member of the Windows
Administrators security group on the computer where you will install it. You must also be a member of the
Release Manager role in Release Management.
From the log, the user you‘re using seems not in the local administrator group. Please make sure the corresponding users has the needed permissions to install the deployment agent. Please check this
page for more information about installation of deployment agent. If you have any other issues, please elaborate more details about your scenario.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I creat a security system for a truck, with Wifi camera playing on iPad/iPhone without 3G/LTE ?

Hello,
I want to create a wifi security system for a truck with cameras, but all the ones I found are IP. So I don't know if it's possible to use it only on wifi (not on 3G/LTE).
If you have an idea, it will be nice...
Thank you

that range of most wifi setup unless you want to pay alot!
would likely mean you could see about as much as the camera from where you were standing
a mifi or otherwise something which bridge a lan to the internet would work
make sure the camera have a webserver in it and then you can see it from any web browser where you put in the login and password

No system assigned for partner in transaction DPCOMMON_MAP_P_S ( Dealer Portal)

Hello all,
Sorry to post a very basic question, but I am quite new to Dealer Portal and SD functional module. Request to help.
I have deployed spare part business package on portal. BP documentaion link. http://help.sap.com/erp2005_ehp_04/helpdata/EN/c3/f71b9a69574d6c84ac33b68d2d03c3/frameset.htm
I have configured as per the steps mentioned in the link below,but still facing issues..
http://help.sap.com/erp2005_ehp_05/helpdata/en/e6/e58079420c4b7e87df4f9c3db04719/content.htm?frameset=/en/e6/e58079420c4b7e87df4f9c3db04719/frameset.htm
As per the above link,below are the steps done.
I have created logical system and assigned to RFC destination using transaction DPCOMMON_MAP_S_R.
Then assigned the logical system created at the above step to partner, through transaction DPCOMMON_MAP_P_S
And lastly also assigned users to partners through transaction DPCOMMON_MAP_U_P.
However I am getting below errors when initial overview screen is accessed,I think there are some configurations missing.. Any help is appreciated.
Personalization data not found.
No system assigned for partner in transaction DPCOMMON_MAP_P_S
Thanks
San

Issue is resolved.
For the RFC destination , log on security tab. Ensure current user is ticked and no hard coded user id being passed here.
Also ensure the personalization data is saved properly by navigating to personalization iview.

Security setup for /SAPAPO/MC62 transaction

Similar Messages

Maybe you are looking for