Security Setup Wizard

How can I turn off the security setup wizard that runs every time I boot the system up?

Similar Messages

Security Setup Wizard keeps appearing on startup

For some reason, the Security Setup Wizard keeps appearing everytime I logon. There seems to be an error when it is completing the last steps of the process. I enter all the information requested and get to the last page and I get an error message that it cannot create the "system keys." What are the system keys and how do I fix this error?
If I cannot fix the error so that the wizard can complete its tasks, how do I prevent it from running on startup in the first place? I checked the run list in the registry but it doesn't seem to be listed there.

Hi sclexman,
Thank you for your good instructions and prompt reply. I don't often see such patient or helpful people outside of the ThinkPad community!
My system has been running beautifully for well over a year.
I am running Windows XP Professional on my IBM ThinkPad T60p.
Typing something like ThinkPad "Security Setup Wizard" into Google with quotation marks, you will get better results.
I literally get exactly what is described above by the other people.
My problem is the Wizard which keeps popping up every time the computer restarts, but the "system keys" step is where the wizard gets stuck, so I thought that might be the cause of the problem.
I put off setting up my security software with fingerprint reader for years, and I just got around to it yesterday. The wizard popped up every time I started up since I got it, but when I went through the wizard and set everything up, it finally stopped popping up.
Shortly after, I went poking through the advanced settings of the ThinkVantage Client Security Solution program and accidentally clicked "Reconfigure security settings". This brought up the same wizard again, and made me re-enter all of my passwords and security questions, which was quite a hassle. This is the time it failed at the "system keys" part of setup; the first time took longer, but it was successful.
My big reward at the end of this was supposed to be the wizard leaving me alone at startup, but he will not stop his familiar haunt!
Any help is appreciated.
Thanks,
Thomas
Security Setup Wizard that won't stop popping up:
Wizard after initial successful completion. If done over, it won't get past the second step.
I don't want to try creating my own system key as your WikiHow link describes, as I'm not entirely sure what I'm doing, and I don't want to actually break my system's security! Everything is working perfectly now security-wise, except for this pop-up window!!!
P.S.
I took so long to reply because when I tried to change my e-mail address to the one I check most often, I was completely locked out of my account. I did not receive any confirmation e-mail no matter how many times I clicked re-send. Today I changed it back to my Hotmail account, and it came within five minutes, so I'm back in. Since Hotmail works, I am guessing that the spam filter on my school's e-mail servers is cranked up too high, rather than any problem on Lenovo's part.

Windows Vista - iPod Nano charges, setup wizard will not start

Help!
I have a new PC, and it's Windows Vista.
I have connected my iPod, and it has charged up, but the setup wizard has not come on?
How do I save music to my iPod? My PC recognises it as an iPOD, and I can drag and drop things into it as though it is a storage device. However, my iPod does not recognise this music or photo's when I turn it on and try to play stuff? There are no instructions in the box. It's brand new from argos! Never had one before, so don't know what to do.
Please help.
Curlzy
(Very fed up lady

Sorry you are having problems.
Could it possibly be any security related software that is preventing this ?
* http://kb.mozillazine.org/Installing_Firefox#Windows
Make sure that you have an official copy of Firefox. Do a clean install BUT make sure you do not use any offer to remove personal data or you will destroy bookmarks and settings. If you have problems try to give the exact error messages so paste them into your reply of attach screen shots.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#'''Windows:'''
#*C:\Program Files\Mozilla Firefox
#*C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These are difficult to recover unless they have been backed up to an external device!
Lets get Firefox installed then deal with any Java problem.
* What is it that you need Java for ??
 see also http://kb.mozillazine.org/JavaScript_is_not_Java

Airport express not being found after going through setup wizard

I restore the airport express to factory conditions by pressing the reset button while plugging it in and then continue pressing the reset button for a further 10 seconds.
I open airport utility and see my airport express in the left column. I click the setup wizard and perform the following:
I click:
1. I want airport express to join my current network
2. I want airport express to wirelessly join my current network
3. I select wpa2 personal and enter my wireless password for my router
4. I click the update button. Message says: "The settings for this airport express have been successfully updated. you can close this window now or wait for this airport express to restart
after about 3 minutes or so I get this message:
"airport utility was unable to find your apple wireless device after restarting. the settings for this apple wireless device have been succesffully updated, but there was a problem joining the wireless network or finding the apple wireless device. you may need to select your netowrk from the airport menu and try again."
any thoughts?

HI
are you sure you are using the correct security type for the main network, when it asks you, after selecting the network you want to join? If you chose the wrong one the airport utility will not tell you, it just won't find it after restart.
check it in network pref/advanced tab
also check the firmware version of the express in airport utility/manual setup/summary tab

I'm having trouble installing Firefox version 6.0.1 The setup wizard is telling me to close Firefox before it can go any further after I've chosen the standard setup. I closed Firefox and clicked the NEXT button again and it tells me the same thing.

I've already tried re-downloading the setup wizard for Firefox 6.0.1 again and re-running it, but I still have the same problem as before.

Flash Player Protected Mode provides a modern, sophisticated set of security protections that we see as critical in today's security landscape.
We highly recommend that users not disable ProtectedMode. Also, it's worth noting that by manually changing your mms.cfg, you have opted out of Protected Mode for all future versions of Flash Player, as we will continue to honor that preference. This puts your system at risk, and that risk will continue to grow over time.
Ultimately, this is an issue with the RealPlayer Browser Record plug-in. There is a more technical explanation in the Mozilla bug referenced above in the thread, but the simplified version is that the security enhancements designed to prevent the introduction of malware via Flash Player make RealPlayer Browser Record plug-in no longer compatible with Flash Player for Firefox. You can disable the record functionality to eliminate this issue, while retaining the ability to view both Flash and Real Player content.
To disable the Real Player Browser Record functionality while maintaining the enhanced security provided by Flash Player with Protected Mode, do the following:
    Launch RealPlayer
    Click the RealPlayer icon in the upper-left corner of the window, and choose Preferences
    Choose Download & Recording from the left-hand menu
    Uncheck "Enable Web Download & Recording for these installed browser"
    Click OK

At setup wizard keeps asking me for password.....

At the setup wizard it keeps asking me for password. i have my internet connect to the router and iam able to get online from my comp. My issue is the password window i put my on password and it goes to checking computer settings and comes back to password and i retype my password and samething.
Please help Thanks

Yep, I had the same thing happening. Save settings at a certain spot, and it asks for a login/pass. The solution for me was to turn off my Norton Security entirely for a few minutes to change router settings. Now the Mac laptop and Nintendo DS all connect wireless.

Setup Wizard does not exist on my 8700v... where is it hidden?!

I have bought a second hand BB, previously on vodafone, currently on O2. The getting started guide assumes I can find the setup wizard instantly. Not only does it not appear automatically it is not in settings or any other place I have looked. The front convenience button does not do anything, so doesn't help either. I haven't set up anything on the phone, other than the time and registering it on the wireless network... setup wizard is the first port of call but can't get to it. Any ideas??

Hi there,
It is possible that the previous user removed it (there are ways to do this) and then simply wiped the device before passing it on to you.
If you need it, you can reload the OS using the steps located here:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Or, you should be able to do everything without needing access to the Setup Wizard at all. For example, all connection settings can be managed through Manage Connections app, keyboard settings and convenience key settings can be managed in the Options, and so on.
If you want to reload the OS though, you can use the steps located in the above link. The only catch is that you'll want to make sure you're using the OS for the original carrier (branded to Vodafone).
I hope this info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Error While running Setup Wizard in SolMan Managed Systems

Hello,
I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
Any input?
Regards,
Ray
Failure with Message Server
An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
ted exception is:
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
connection has been established.)
Please check Message Server host/port, or enter the P4 ports in cluster table.

Hi furious
I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
after that you prepare your organization and It will works
cheers....................

Error while running the diagnositc system setup wizard

Hello All,
When I am running the diagnstics setup wizard,I am getting the following warning for SSO.SMD is the SID for my solution manager system and it is ABAP+JAVA system:
SSO Setup : both Java and Abap stacks are using a ticket certificate with identical DN : 'CN=SMD'
SSO will not work with such add-in configurations. Please refer to Details below for manual actions to be taken, and run this setup step again.
Step SSO Details
Either the Java ticket certificate or the Abap ticket certificate of the managing system (ABAP Host=localhost sys=01 client=200) must be deleted and re-created, using a Subject DN other than 'CN=SMD'
For ABAP stack : please use transaction STRUSTSSO2 to delete the system PSE, and recreate the PSE Own Certificate with a different name (NB : this will destroy any existing SSO Setup on ABAP side)Or, for Java stack : please refer to SAP Note 701205, section 'J2EE', third bullet and note attachments (ReplacingPublicKey.pdf) for doing it on Java stack
Also I am getting an error:
The upgrader doesnt run,it says the SMD upgrader will be run
What does this mean
Please help
Rohit

Thanks Jagan
I have run upgrader as u mentioned here
Just needed to confirm
Well I will correct the SSO as u mentioned,Thanks
Also I am getting an error for wily interscopy while I run the setup for managed system
I will post that in a diferent post
Thanks
Rohit

WiFi Wireless Setup Wizard produces Blue Screen of Death on Officejet Pro 8600 Plus

The wireless setup wizard on my Officejet Pro 8600 Plus is failing immediately after "scanning for networks". I get a blue screen of death with error message B8494B00, followed by "turn printer on and off" with flashing screen.
I bought the printer about one month ago and it has worked perfectly so far. My Apple Time Capsule failed yesterday, so I bought a new one (latest model) and had to set up the wireless network again. When I tried to do so on the printer, I got the error for the first time. Nothing else had changed. Other devices are working with no problems on the new network. The computer is an Apple iMac running OS Mountain Lion.
I have tried turning the printer on and off, disconnecting the power and reconnecting, then turning it on again, but no result. I have restored the wireless to factory settings, but no difference.
Please help.

Right off I have to tell you I do not "speak Mac".
I assume the "Apple Time Capsule" is a name for a network router? A syncing device?
Unless I am mistaken:
You do not need the Wizard to set up the network -- it is pretty software for an HP PC; when it works, it can make things easier. The setup Wizard is not necessary for the process. I should think this is true for the Mac.
=====================================================================================
If you cannot get someone from the Printing group to answer your specific concern,
you may have succes with the following:
The User Guide has pretty good detail on how to set up the networking necessary to get the printer connected to either a PC or Mac environment. Assuming you can get the printer to "Reset network settings" (User Guide, page 222), then you can re-enter the information you require manually. It is a bit tedious, but is may work better than fighting the Wizard.
OfficeJet Pro 8600 User Guide
You may be able to circumvent sone or all of this by reinstalling the Full Feature Software for your printer -- that assumes you are first able to "reset network settings", at least, and get a printout test page to verify that the reset actually worked.
Select your printer from HP Office Jet 8600 series
Mac – By Garland_M
HP Wireless Printer Setup (Tutorial Video)
Mac
YouTube Search - HP printer install for mac
Good Luck!
<<< Click on the White Kudos Star on the Left to say Thanks!
Clicking “Accept as Solution" helps others find this fix for a same or similar issue >>>
2013 Year of the Snake!
Kind Regards,
Dragon-Fur

HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

Hello, BAHannebaum.
The article below should resolve any device not being recognized in iTunes issue that you are experiencing. The most common issues are the Apple Mobile Device Support driver or iTunes is outdated. Start with the first step and test the results after each step processed.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

HP Photosmart 5520 Wireless Setup Wizard Hangs, USB fails to install

Hello,
I bought a HP Photosmart 5520 4 weeks ago. I installed it and setup a wireless connection. It worked for 1 week without flaws.
After a holiday my HP PS5520 printer lost its wireless connection to the network. I restarted the printer, still no wireless connection. all other devices like iPhones work OK on the wireless network. Tried to run the Wireless Setup Wizard again but the routine hangs (the spinner stops) when searching for routers and no networks are displayed, it hangs. Only a powercord detach can/will hard-restart the printer. After starting the printer, the printer complains that I should us the power butten, but that does not work when it hangs at the wireless setup wizard.
I tried this routine several times, but the printer hangs every time when searching for routers... Tried manual, reset factory defaults, reset network defaults etc... Wireless is simply impossible to use since it can not be setup.
So I tried to use the USB port directly attached to my PC. Since the wireless driver was installed, I connected the printer to the PC with USB but then it was marked as a unrecognised device by Windows 7. I tried to add the HP driver manually but when selecting the CD (inf), Windows tells me that the service stoppen (-10)...
So I installed the software from the CD which pointed me to the online version of the software which I installed. After selecting the USB radiobutton, it tells me to connect the HP PS 5520 which I did, but the HP install window failes to detect that the printer is plugged into the USB port and the printer is installed by Windows as an unknown device.
I uninstalled the 'unknown device' and tried again, wthout luck. Tried another USB port, Windows installed it again as an unknown device and the HP software failes to pick it up. So after googling I deleted all HP software from my computer (Intel I7 - 8 GB), uninstalled the unknown USB device from windows, rebooted several times, deleted all HP folders and cleaned all temp-folders (I am an IT professional!).
So, I installed the software again but when the HPO software asks me to attach the USB cable, Windows again installed the 5520 as an unbknown device and the HP software again failes to see that the printer is attached to the PC.
Tomorrow I will buy a new printer but since this HP 5520 is only 4 weeks old, I really want to knwo how I can fix
1 The issue that the HP printer hangs when searching for routers / wireless networks
2 Windows/HP software to find the HP 5520 through USB
I guess nobody will have an answer since Google does not give any help. This post is merely to expose my frustration that HP makes fine printers but failes to deliver issue-free software... I always have issues when setting up HP printers somehow...
Of coarse I hope that somebody has a clue..... Good night!
Regards
Marc Verkade
Curacao

I have had my 5520 for a couple of years, when intermittently it has dropped off the wireless network, and I have had to reinstall the network. Now it does it every time I switch it on - it has lost the network and password. This is very irritating...

2 problems: 1st unopened messages, 2nd cannot add personal email in setup wizard

Hi guys, I'm having a problem with my device. It seems like I cannot add a personal email adress in my email setup (from the setup wizard) When I enter this setup wizard > email setup the following appears: email setup select an email setup option [ ] I want to use a work email account with a Blackberry Enterprise Server AND THATS THE ONLY OPTION I CAN PICK! (a friend of mine with the same device could add a personal email) from there I can only choose { close } or { next } what is happening, can someone explain what I can do to add my personal adress? ------------------ Another thing I find quite strange is the fact that on my desktop the icon "unopened message count" appears. When I open the BB-menu, there should be a little star in the message-icon right? Well it isn't there! (the litte white-on-red star) So this icon tells me that I have unopened messages, but I can't find them anywhere.. guys please help!!!

Hi and Welcome to the Forums!
Your first problem is carrier related -- you must have the proper data plan from your carrier (at whatever costs they charge) to enable enhanced BB functions like email. A generic data plan is not usually sufficient -- some call the required plan The BlackBerry Data Plan. But call your carrier and ask them what you need from them in order to have access to their BlackBerry Internet Services (which include personal email).
Your second problem I am not understanding. What "BB-menu" are you accessing? Where exactly is the star you are seeing? Where exactly is the star you are expecting to see? More and clearer details, please.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Security Setup not working

Hi,
As a part of security setup we have done the following things:
- Users created and assigned as members of groups. One group is created per entity.
- Groups have been provisioned for the application and given security class access
- Security classes have been created and attached to metadata. for e.g, all entities have been attached a Sec class in properties.
- In application settings, Node Security = Entity, Security for Entities is Checked, Enable Metadata Sec Filtering is also checked.
Even after this, the security setup doesnt seem to be working. A user with minimal provision (only Data Form Writeback from Excel) and no security class access is also able to see all the entities, also other forms, grids, etc which have been attached diff security classes. He is able to edit the forms and grids.
Can anyone help out as to what is it that we are missing?

What role(s) do the users have? Any user with the Administrator role bypasses class access checking and is assumed to have full access to everything. No other role provides this bypass.
Editing forms and grids has nothing to do with Entity security. If the forms and grids have no class assigned to them, they use the [Default] class which I suggest all users have All rights to anyway. If there are grids/forms you do not want users to change, you should assign a specific class to them, other than [Default].
Enable Metadata security filtering should restrict users from seeing the members for which they have None access to, but as long as they have Read or All access, they will see the members in a pick list.
--Chris

In setup wizard it says "Your computer must be restarted to complete a previous uninstall. Do you want to reboot now?" after uninstalling old version and trying to install new. I CAN NOT run ANY version now......HELP

I had an old version of Firefox and uninstalled it. Then I installed the 5.0 version. BUT, in the setup wizard it says "Your computer must be restarted to complete a previous uninstall of Firefox. Do you want to reboot now?" I choose "YES" and the computer reboots, but when I run the setup wizard again, it says the same thing. I have reinstalled it 8 times, and it says the same thing......I have searched my computer for it, and can't find what it's talking about!! HELP!!!!!!

Cor-el:
Thanks so much for your help, it is very much appreciated.

Security Setup Wizard

Similar Messages

Maybe you are looking for