Security: showing me online when I am not

Hello, I have a question about security. My husband could see me coming on and offline yesterday but I was not using skype and all my devices I was signed out.
I changed the password in case I was logged in somewhere else but this has not solved the problem. It still showed me coming online & offline.
Could you look into this for me? Can my community manager log in and see my messages?
many thanks

I'm also having this issue. A friend of mine told me I was online, when I wasn't, she talked to me and, most of all, I had some private conversations in there. I don't really know if someone is hacking my skype account, but I already changed my password. I don't know if it really kicks out everyone logged in, but I've tried that.
Skype is replacing MSN and it doesn't even have all features MSN had! There should be an option to see everywhere I'm logged in at on time...

Similar Messages

Security Question: showing me online when I am not

Hello, I have a question about security. My husband could see me coming on and offline yesterday but I was not using skype and all my devices I was signed out.
I changed the password in case I was logged in somewhere else but this has not solved the problem. It still showed me coming online & offline.
Could you look into this for me? Can my community manager log in and see my messages?
many thanks

I'm also having this issue. A friend of mine told me I was online, when I wasn't, she talked to me and, most of all, I had some private conversations in there. I don't really know if someone is hacking my skype account, but I already changed my password. I don't know if it really kicks out everyone logged in, but I've tried that.
Skype is replacing MSN and it doesn't even have all features MSN had! There should be an option to see everywhere I'm logged in at on time...

WOT and Webutation is showing as disabled when they are not

WOT and Webutation is showing as disabled when they are not .The icons show,but no color on icons. Says WOT is disabled when its not. Also the same on Webutation. Tried uninstalling then reinstalled both and the same thing happened. Tried Wot on another users account and theirs work. Can someone help me on these issues?

capaho wrote:
That's like saying a boat is an airplane because it's not a car.
SMH
In other words, how does your explanation account for ED (enhanced definition)?
ED is generally considered to be 576p or 480p, but this is not universally accepted and these resolutions are often accepted as HD also. Additionally an ED signal uses non square pixels just as SD does so the horizontal pixel dimensions should be no more than 720. Exactly how the tv would treat these resolutions I don't know (yet).
If you have a copy of the source code for the function that displays the HD icon, please post it so I can take a look at it.
Why should I have such a copy and why is it relevant. The issue here is that the OP believes his video is incorrectly labelled HD which is not the case. There may or may not be anomalies in the way the tv attributes the HD label to some files (although it isn't the case for me), however the OP has incorrectly converted his source video and they are no longer SD, they are also not ED by whichever definition you wish to apply and any such anomalies should they exist are not responsible for the OP's files being labelled HD.

First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on t

First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on two PCS without success.

Maybe the Nano you got is defective. Have it replaced.

HT201303 Why does is keep saying my security code is incorrect when it is not?

Why does is keep saying my security code is incorrect when it is not?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

HT3702 My card security code keep being declined and the app store says my security code is invalid when it is not

Why does my app store keep saying that my security code is invalid when it's not??!!!!

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/

Showing my contacts as online when they're NOT

It's really getting into my nerves. My contact has his skype automatically answering calls from me so I can can call him even when he's sleeping without disturbing him because our skype calls always get cut after a few minutes. This has happened all the time before, it always shows that he's online even when he's not! When I call, the voice message shows up and it's getting pretty annoying. I found a solution before, I quit skype and open it again. or I look at my iPhone's skype because it USED to show if someone really is online or offline, or I sign out on skype and sign in again, or I even turn off my wifi and turn it on again. I even changed my laptop from the Microsoft Surface 2 to an Apple Macbook Air because I thought the Surface 2 was the problem. BUT NO. SKYPE WAS THE PROBLEM. I did all 4 methods even when they're really annoying to do, and they worked fine for a few days, BUT NOW THEY DON'T DO SH**. I looked at my phone's skype, logged out my phone's skype and logged in again, logged out my laptop's skype and logged in again, turned off my wifi and turned it on again, quit my laptop's skype and open it again, and again and again and again! Note that everytime I do each method, I try to call him incase he's online, but that FFFFFing video message thing shows up EACH TIME.
I'm seriously pissed off. Skype was the only thing connecting us because we're in a long distance relationship. Skype isn't helping at all. I am on the verge of switching from this crap to Viber because I heard viber was WAY BETTER. Fix this man. Uggghhhh!!

Hi Daniel:
Try this:
Complete the following steps to enable presence in Microsoft Outlook for individual users with the Active Directory User and Computers administrative tool:
Step 1       Start the Active Directory User and Computers administrative tool. You must have administrator permissions to run the Active Directory User and Computers administrative tool.
Step 2       Select View in the menu bar and then select the Advanced Features option from the drop-down list.
Step 3       Navigate to the appropriate user in the Active Directory User and Computers administrative tool.
Step 4       Double click the user to open the Properties dialog box.
Step 5       Select the Attribute Editor tab.
Step 6       Locate and select the proxyAddresses attribute in the Attributes list box.
Step 7       Select Edit to open the Multi-valued String Editor dialog box.
Step 8       In the Value to add text box, specify the following value: SIP:user@cupdomain.
For example, SIP:[email protected]
Where the user@cupdomain value is the user's instant messaging address. cupdomain corresponds to the domain for Cisco Unified Presence or Cisco Unified Communications IM and Presence.

I show up as Online when I'm not

Hello, I have been having a problem lately where all of my contacts see me as online even though I'm not signed in. I have explicitly signed out of Skype on my iPhone and on my Mac. This is getting pretty annoying as people (coworkers, family, friends) think I'm online and try to send me messages or call me when I'm not online and they get upset that I don't reply. I searched the message boards for some fixes. I tried several of them to no effect. One of them had me delete my Skype folder in ~/Application Support but I had to revert it since a lot of my contacts started showing up as "Pending" (like I'd sent them a Contact Request and the had yet to reply); this was unacceptable for me. Does anybody have any new ideas on how to fix this? If it keeps up I'm going to try to sign up for a second account on another computer and keep an eye on my primary account's online status using that second account while I attempt to debug the issue. This seems like a huge waste of time to me and I'm not sure if I'd rather just get rid of Skype if it comes to that. Thank you. - nc1024

This started happening to me too recently and my boyfriend is being accusing because of it so I really just want to know how the heck do I make myself look offline because I clearly am. I just go under the skyp status drop down menu and set myself to 'offline' or will keep myself online and manually signoff of skype. I figured manually signing off will turn my status to offline. Even when I do the pulldown menu and set my status to offline he's said I was online because I received an 'offline' message from him which isn't part of skype, therefore I know I was showing myself online. That being said, if I go under the menu and first set to "offline", THEN, sign out, will it finally show me as truly offline? I hate having to do that because I like the convience of just 'waking my computer' and setting my status to online, NOT having to sign in all over again. So again, if you just varify with me the long way of making myself definitely be shown as 'offline' that would be awesome. I don't care if I have to sign in the long way so long as my boyfriend is not feeling like I'm ignoring him when I'm not ONLINE but Skype is still showing me as online urrggghhh!

HT1918 Why is Apple saying my Security Code is invalid when it's not?

I want to get an app that's free, but Apple tells me to sign in for billing info. I put in my Security Code, correctly, but when I hit Done, it says the security code is invalid.

iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646

Contact shows as online when I log in but then goe...

Recently I've noticed that one of my contacts appears as being online when I log into skype but almost immediately goes to Away. Generally they use Skype on their phone. I have asked them about this and they have said that once they have spoken to me (usually late at night for them) they put their phone down and go to sleep. However, when I log back into Skype later the green dot appears next to their name, almost immediately goes to yellow and then if I look at their Last Seen Online status it is either very recent or the exact moment I log back in.
Can anyone explain what is going on?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Why is my iTunes account telling me my "security code is invalid" when it's not?

I can't update any of my apps or buy anything from iTunes because my account says I have a billing problem. It asks me for my security code in the billing information and when I put it in it tells me "security code invalid". There is definitely money on the account I'm using so I know it's not that. It's annoying when you can't update anything and it's been over a week since I could use that account. What do I do?

Check this article:
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. This shows up even when I am not connected to a USB. what do you think the problem is?

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?

Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3

Mac Book Pro on Mountain Lion HDD shows almost full when it is not

Hi,
I am using a MacBook Pro End 2011, with an HDD of 500 GB.
There is a partition on the HDD, and one side runs Mac, and the partition is for Windows 7 via Parallels (about 125 GB).
SInce about the last 10 days, my HDD shows only 10 GB of free space, and I think it should be having much more free space.
My data is about 105 odd GB, and the folder "Applications" shows about 7.5 GB used.
I fail to understand how the HDD can be out of space.
I tried using Disk Utility, and the option to "Repair".
While it runs and repairs some permissions, it says that some permissions cannot be replaired and that they have been modified, but the problem does not resolve.
Also , the machine feels a bit slower than before.
Help much appreciated.
Thanks, in advance.

Care to share which OS you are using?
Quick fix
How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk
HD Space Checkers:Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

Parent node showing in schema when child nodes not present

I had several folks answer my questions on mapping from a flat file to an EDI 835 schema and I am down to just a couple of issues before I finish up. I have a conditional mapping issue that I have to solve before I can map the rest of the document. I am
mapping three fields in a single non-repeating line in the flat file to a repeating segment in the 835. Basically I need to create a separate AMT_ClaimSupplementalInformation segment for each field in the flat file line. As you can see in the picture
below I want to create a AMT_ClaimSupplementalInformation segment for CDISCOUNT, CINELIGIBLE and CALLOWED.
You can see I have quite a bit of conditional logic attached to the three fields, but I have all three connected via a loop to the AMT_ClaimSupplementalInformation parent. I cannot attach the loop to the parent of the three fields because it only appears
once in the file. And if I leave the loop out the AMT segments get stacked funny, like this:
<AMT_ClaimSupplementalInformation>
AMT1
AMT1
AMT2
AMT2
</AMT_ClaimSupplementalInformation>
You can see how they should be stacked in the next pic.
In some cases however, one of those fields may be blank so I will not need to create a AMT_ClaimSupplementalInformation segment for it. I was able to use some conditional mapping ideas you guys gave me using the Not-Equal and Value Mapping functoids, and
that works great to keep blank child nodes from being created. However, Since I have a loop attached to the AMT_ClaimSupplementalInformation parent node it still creates an empty parent node even when the child nodes are not created. See the empty parent
node in the pic below.
Since looping functoids can only be attached to links I don't know how to make the parent node conditional.
Any suggestions?
Thanks.

Boatseller, thanks for the tip. I did end up going the XSLT direction. It's a bit of a hack, but I'm using the following XSLT to eliminate empty nodes :
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="@*|node()">
<xsl:if test=". != ''">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
I created a new map with the 835 schema on each side. I then created an XSLT file and pointed to it in the Custom XSLT Path property. It seems to work well. I call this map right after my FlatFile_To_835 map.
I was hoping to use the scripting functoid with inline XSLT in the map so that I didn't have to worry about deploying the XSLT file(just another thing to keep up with in the future), but when I compile it I get the following error:
The "Scripting" functoid has 1 input parameter(s), but 2 parameter(s) are expected.
I'm wondering if I'm connecting the schemas incorrectly in the map:
In any case, I'm past the empty nodes issue for now, which was a big roadblock. Now I have to deal with the CAS segments which are, as you said, a real pain.
Thanks for all of your input.

Find Control in Event Structure doesn't show the object when it is not in the frontmost Tab page [Bug Report, LabVIEW 2012]

When you are looking for the control/indicator handled by a case in the Event structure, you can use the contextual menu item "Find Control" (doesn't distinguish between control and indicator, BTW).
The result is that the control/indicator is highlighted on the FP. The problem is, if that control is in a Tab and specifically in a page of that Tab that happens to not be the frontmost, the only thing you'll see is marching ants, but no control:
<=========== the wrong TAB page was shown. LV did not bother to switch to the relevant one....
In other words, "Find Control" in the Event Structure doesn't switch the tab to the owning page. This is contrary to what happens if you right-click, say, the terminal of this control: the FP will switch to the owning Tab page.
I'd call this a bug and this is definitely an annoyance (which most likely has been around since the creation of the Event Structure).

I did not. Is there any better chance for it to be caught there by a NI eye than it is in the LV forum? I though these threads were deemed to gather bugs/features that had been already acknowledged by NI with a CAR number.
I (and others!) wished there was something like this: http://bugs.sun.com/ or http://bugs.python.org/ for LabVIEW...
I am just coming back from a short conference of scientists who quite uninamously ended up with the conclusion that LabVIEW was to be disregarded as a lab development environment because of maintenance problems (which could have been argued for any language in my opinion, although I think they meant spaghetti diagrams are the natural tendency of students who could not care less as they are not going graduate because of their LV skills or lack thereof), but I guess I could have added my grain of salt and added the complete opacity on bug and feature handling by NI.

Security: showing me online when I am not

Similar Messages

Maybe you are looking for