Security System Review

Hi Guys,
My CLD is on Wednesday and here i attached security system solution for review. Please review as early as possible, am running out of time.
Yes, I know its an older exam but in CLD 2012 Prep Guide its states that one of the possible exam scenario and don't know how much it differs.
Attached Back saved version in 2010
Waiting for reply.
Attachments:
Security Systems LV 2010.zip ‏361 KB

Quickly,
Discriptions and tip strips for every object the user sees. Get into the habit fast.
I would have used an array of round color boxes and clusters of switches (and filter events to allow the overridden conditions to be expelled you are missing some functiality there)
Overall not too bad
Good Luck
Jeff

Similar Messages

Security system CLD exam review

This is similar to solution online
Please let me know if you have any general comments on the solution or any other comments to my questions below
1. I have created a project. Was it necessary or does it matter.
2. I put data in a Data folder. Does I need to create a separate folder?
3. It asked for test file. I used a .csv file instead of .txt. Is it ok to do that?
4. I used only one case for alarm, bypass and tamper switch instead of using 3 cases for solution online.
Code is in LabVIEW 8.6
Thanks
Attachments:
Security system.zip ‏67 KB

Overall this is a pretty elegent solution. There are a few things that you will want to improve though.
1. This one jumped out at me immediately. Be very aware of extra and unnecessary bends in your wires. Try to line things up better and avoid all the extra bends.
2. I would use better names for your subVIs. Use names that are descriptive yet meaningful. Logic.vi is not very meaningful or descriptive.
3. I would not modify or change the requirements of the test. If they specify a text file then use a text file. Part of the exam is to determine if you can follow requirements. Changing them is not receommended.
4. Avoid objects overlapping each other. For example look at the labels in your Initialize state.
5. Avoid using "Use default if unwired" for your tunnels on structures.
6. Make sure to add descriptions for all of your controls and indicators including the ones in your subVIs.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Outlook 2013 - Password change breaks S/MIME Certs "An error occurred in the underlying security system. Key not valid for us in specified state."

AD password change comes up, user changes password.
Tries to send signed or encrypted email with a Comodo S/MIME certificate, and gets the following error:
""An error occurred in the underlying security system. Key not valid for us in specified state."
I now have two reports of this error - one on Windows 7, and one on Windows 8.0 (remote user).
The one on Windows 8.0, we tried removing their S/MIME cert from Outlook/Windows and re-adding, this did NOT resolve the issue.
Plan was originally to have the 8.0 user ship their machine in, and wipe it, since nothing else could fix it and I wasn't finding anyone else with the same issue. Now that I've got a second user with the same issue, its looking like a bug/issue and
not a random glitch.
Thanks in advance for any and all help with this!

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Setting up a security system via Airport Extreme...

So I'm setting up an in-home security system called ingrid and everything is cool but the ingrid system does not detect the internet. I have everything set up as per the instructions for airport and ingrid... I'm a assuming it must be some kind of setting that just isn't allowing the phone that the system works off of to access the internet... I put in the phone's MAC address and gave it everyday all day timed access.. Still nothing... please help.

Most Guest Network problems are a result of not using the correct type of modem with the AirPort Extreme.
Apple is expecting you to use a simple modem.....not a modem/router or gateway type of device.....with the AirPort Extreme.
So, let's first confirm on what type of device that you have to make sure that it will be compatible with the Guest Network feature.
If you are not sure of your modem type, post back with the make and model number of the device that you call your "modem"......so we can check compatibility with that device.

How do I port forward or open a port on the Airport time capsule to hook p a security system?

I have an airport time capsule and a security system. The installer doesn't know anything about using routers etc, especially on a mac. They say I have to port forward or open a port specifically of this device. I have very few skills when doing this IT type. Is this hard to do? Can I do it myself? He wants to get an IT guy out? $55 an hour, how long would it take? Thanks in advance for anyone who can help!

The method is here.
AirPort - Port Mapping Basics using AirPort Utility v6.x
If you need to get someone in, it depends.. The TC can be recalcitrant.. due to your setup of it following the apple guides.. and it depends on the security system and how simple that is.
There are multiple issues.. for example how do you find your IP address from the web when you have dynamic IP from your ISP.
Do you intend to setup dynamic DNS? Can the camera /dvr system handle Dynamic DNS?
I recommend you read very carefully the instructions for what has been installed.. because merely opening the port is only a small part of the issues involved in remote access to the security system.

How can I creat a security system for a truck, with Wifi camera playing on iPad/iPhone without 3G/LTE ?

Hello,
I want to create a wifi security system for a truck with cameras, but all the ones I found are IP. So I don't know if it's possible to use it only on wifi (not on 3G/LTE).
If you have an idea, it will be nice...
Thank you

that range of most wifi setup unless you want to pay alot!
would likely mean you could see about as much as the camera from where you were standing
a mifi or otherwise something which bridge a lan to the internet would work
make sure the camera have a webserver in it and then you can see it from any web browser where you put in the login and password

Tracking oracle database activities in security/system logs of windows server

Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
dhomya

Hi Dhomya,
I am not familiar with Oracle database, though you may try to enable file system auditing:
Audit object access
https://technet.microsoft.com/en-us/library/cc776774(v=ws.10).aspx
Apply or modify auditing policy settings for an object using Group Policy
https://technet.microsoft.com/en-us/library/cc757864(v=ws.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Can database activities of creating or dropping tables/packages be tracked in the security/system logs

Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?

2765539 wrote:
Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Your first question is easy, you configure audit to log to the OS audit trail with
alter system set audit_trail=os scope=spfile;
and then enable audit for whatever actions you want to capture. All documented in the Security Guide.
Your second question makes no sense unless you explain what you mean by "oracle log".

Cannot open port through Airport Extreme to access security system DVR

I have internet access through Bellsouth DSL -- modem only. We had a security system set up around a DVR recording images and connected to the internet through a Linksys router. We would use a client on outside computers to connect to the security system dvr and see what was happening (live or recorded). I switched out the Linksys for the Airport Extreme, and now we cannot connect to the DVR.
Do I need to manually open a port to the DVR? How do I do this? The DVR connects to the Airport Extreme via Ethernet, and as far as I can tell, the Airport Extreme connects to the DSL modem via Ethernet using DHCP. We have a static IP address. I thank you in advance for any answers, and I apologize if I'm not giving enough information.

Let's double-check your Port Mapping setup on the 802.11n AirPort Extreme Base Station (AEBSn) ...
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: 10.0.1.4
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 6746
o Public TCP Port(s): 6746
o Private IP Address: 10.0.1.4
o Private UDP Port(s): 6746
o Private TCP Port(s): 6746
o Click "Continue"

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Hi the_mad_movies,
It seems like this article will be the best option for addressing this issue:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Help networking a Security System DVR for remote viewing

Hey,
I am trying to network my Security System DVR for remote viewing but cannot seem to get it working. I have read some post on this site as well as many others and followed instructions to the T but to no avail.
Here's what I've got:
Linksys WRT54G2 V1 connected to a modem.
My DVR has 3 settings for networking:
-PPPOE
-Static
-DHCP
On DHCP, The DVR automatically sets these settings:
IP Address: 192.168.1.100
Subnet: 255.255.255.0
Gateway: 192.168.1.1
and then the DNS is the same as the one on the "status" area of the router settings...
Port: 10000-10020
I set up port forwarding for 192.168.1.100 for port 10000-10020 selecting "both"
If I pull up the "DHCP Clients Table" it shows the above IP Address but with no name....and the MAC address is something like ee:ee:ee:d4:03:5f.
I have tried to change the DVR to Static and do everything manually but thats not working either.
I created a Dynamic DNS with goddns.org but the DVR seems to have its own one built in that you cannot change. (at the bottom of the network settings it says something like "URL: 123484984.goddns.org----Status: OK." But when I try to type that in the address bar of IE it goes no where.)
I hope someone can tell me why its not working.... It was working when we first got everything set up...then it stopped. then I messed with it and got it working but didn't know what I did. Now its broken again and I don't know what to do.
-Ian
PS. When I am connected to the router via LAN cable and I type the internal IP Address assigned to the DVR by the DHCP (192.168.1.100:10000) it brings up the DVR menu perfectly. But when I try to log into it from a different location...with the external IP address...thats when I have trouble. I do not think my external IP has changed since I got this router set up.
Any help would be awesome.

Hmmm... Did that and I can't seem to get it working still. Whats weird is that as long as I am connected to the router...I can access it through the internal IP address.... (if using DHCP its 192.168.1.100:10000 and if using static its 192.168.1.99:10000)
Those both work when set up on DHCP for the first and Static for the second. But as soon as I type the external IP address with the port it doesn't work. Its like there is a firewall OR the port forwarding is not working. But everything on the port forwarding page looks good... Its enabled, set on Both, correct port range... 10000-10020...
Any Ideas?
-Ian

MY LVOOP solution to CLD- Security System

Hi All,
Today , I gave a shot at the security system example from CLD. I did it using LVOOP. Do leave your comments on the code. (I havent done much documentation. Also, I have given the flexibility to the program to log file in any format, as per extension entered by user. The code has been written in a hurry, so pls ignore any cleanups of BD remaining ).
Thanks in advance!
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"
Attachments:
Test_Security.zip ‏100 KB

Pretty good all in all, some comments though.
They like comments and descriptions in controls and indicators, points are deducted for not having this.
They also like block diagram constants to be labelled (again points off for not doing this).
Your error cluster is not handled too well, if there is an error in any of the states it will just propogate through continuously, probably not what you want. I think the app is supposed to stop on error (cant remember exactly).
The Array local variable in the "get status" state is unnecessary, you could just move the control outside, into the while loop. Locals are generally discouraged.
In the "get status" I would not recommend hiding the index display of the string array you are passing on. At first glance it seems the same state is being queued regardless!
You are not closing the file reference.
One thing to note, my CLD was a lot longer than the pratice examples (a lot!, and I code quite quickly).
Good effort though!
nrp
CLA

Home Security System For Mac?

I'm on the market for a home security system I can run through my home computers. I was all set to purchase a nice Logitech system with an outdoor camera and everything else, and noticed it doesn't work with Mac.
I've done a lot of research, but I'm not finding a recommended system for Mac users.
Can anyone make a recommendation or point me in the right direction?
Thanks.

You might check CNet Downloads or MacUpdate and search for the software. Then you will know what systems should work with Macs such as Thinking Home that works with X-10 devices.

LabView 2012 Security System Main vi's have error 200559

The vi's give errors of 200559 in my LabView 2012 and NI application engineer "John Staskal" told me as "Another good step
is to recreate the VI in your current version of LabVIEW so that you know the error is not caused by upgrading the VI to a newer version of LabVIEW." I did all that, but not resolved.
Their application engineer John Staskal also told me as "In addition to working to resolve the error you may want to pursue is posting on our upgrade forum and asking the community to convert the VI to a current
version of LabVIEW. http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion".
I did all trouble shooting steps such as highlight execution, probes, etc as what their application engineer told me and still having error of 200559 in LabView 2012.
I appreciate help from any one.
Ali Tariq Bhatti
Ali Tariq Bhatti
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
NI ELVIS II Security System VIs (2).zip ‏313 KB
Error 200559.docx ‏500 KB

RavensFan,
I) Yes, I open up the front panel of the Express VI's and probe into them.
2) I use the express vi's, but if you see my attached vi's file. You will see Security System Main vi is the main vi where the program is running and where I am getting the error of 200559.
3) I also attached the word document file, so I am getting error of 200559 in probes 3, 4, and 5 using Export Key Press and Voltage vi's in this post.
4)Do you know, how to convert these my attached vi's to 2011, 2010, 2009, or LabVIEW8.5 version. May be, it fix the problem, or if you know some one to get help from or get chance to use ELVIS II board, so let me know .Your help or any one's help is appreciated.
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
did probes for Export Press and Key vi's file.docx ‏340 KB

Where's the FREAKING manual for the DigitalLife Security System?

Where is the printed documentation for the AT&T DigitalLife Security System? The so-called on-line system is PATHETIC and UNUSABLE, as it is impossible to(a) get it to run at all and (b) has light gray TINY printing on a white screen, making it UTTERLY impossible for senior citizens like myself to read (when we can get it to appear at all). After all the time and money I've spent on this system, I WANT SOME DOCUMENTATION!
Ed N
Galloway, Ohio

Access Help is what you're looking for.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Security System Review

Similar Messages

Maybe you are looking for