Security tab in Options is not working after Firefox 6 has been installed please help

when i click the tab nothing happens

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Similar Messages

Places not working after photo has been edited...

Hello All
As the title states after I edit a photo in Iphoto (on the ipad, in either Photos or Adobe Express) the edited photo no longer shows in places.... Is this just the way it is? Does the geotag go away after editing? Should I be saving the edited photo differently? I know if I leave the original it will still show in places but I would prefer not to have both versions on my Ipad just the edited version, but I do like the Places tab/option....
Any help would be greatly appreciated.
Thanks :-)

If you have the serial number for the installation and it is version 8 or higher you should be able to download it thru one of the pages linked below. If you registered the software, you should be able to find the serial number information for it thru your Adobe account.
If the above holds, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Photoshop/Premiere Elements 8:
http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
Photoshop/Premiere Elements 9:
http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
Photoshop/Premiere Elements 10:
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Photoshop/Premiere Elements 11:
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

BOOTCAMP Suddenly not working after a year...Please help

I am not sure if this is the right place to post this but I need help with the BOOTCAMP hard drive on my mac. I had this macbook for over a year now and when I first got it I installed the BOOTCAMP hardrive and since it has been working fine. I know that when you turn on the laptop you press the option button and both show up. HOWEVER for some reason today, out of the blue, it won't work. When I press the option button nothing shows up and the screen stays grey. I then have no choice to just turn it off and turn it back on again. I can't get into the bootcamp harddrive.
At first, it showed up and then went black. And my computer was low on batter and shut off. in the middle of processing it. When that happened something popped up and over a black screen and I couldn't read it cuz the computer shut down fast. And since the harddrive doesn't show up anymore...
Does anyone know why this happened and how I can fix this? Please help me

If you can get the Windows install disk the first thing would be to see if it will boot the computer and then run the repair utility. If not then a reinstall is probably necessary.
For furture reference it is prudent to back up a BootCamp partition so that a complete reinstall is not necessary and your data is protected. For information via a recent thread read this:
http://discussions.apple.com/thread.jspa?messageID=12280024&#12280024
You can't have too many backups of any drive.

WRT54G wireless not working after upgrading to windows vista, please help

Hello everyone....
I have a few problems. I upgraded to Windows Vista and cant seem to get my wireless internet working. My router is WRT54G wireless-g broadband router. Ever since I upgraded Vista my xbox 360 will not connect.
I just bought a new wireless web camera and that does not work either because the wireless is not working.
Any suggestions on what I should do to solve this issue?
I noticed when I goto 192.168.1.1 my firmware version is Firmware Version: v3.03.9 does that have anything to do with it? Is there a more up-to-date version that will help?
Hope to hear from someone.

I have the same problem, and so does my son, he has a toshiba satellite new laptop and I have an acer new laptop, both have Vista on them, and my wife has XP and has no problem getting on teh router, but i have this problem everyday.
Eventually it will all of a sudden show up and connect and start working, then if you laeave your computer in standby movde overnight, it will still work in the morning, but if you shut down comeplety you will lose the connection for who knows how long. what is the fix Linksys?
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 12-28-2007 07:28 AM

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

My apple id is not working for my iPhone activation. Please help me.

my apple id is not working for my iPhone activation. Please help me.
i'll just restore it.

Not working in what way?
Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........

This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.

HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards.

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden

After Firefox has been running a while, every link opens a new window

After Firefox has been running for a while, every link starts opening in a new window. Until today, if I closed Firefox and restarted it, it would stop happening ... until it started happening again. Then today, I closed it down and restarted it, and it was STILL happening. So either I find a solution, or I stop using Firefox on my Mac.
This is a vanilla installation - both for the Mac and Firefox. I don't use the Mac as my main computer. The Mac is running OS X 10.5 8. The problem has existed through many upgrades of Firefox. I always upgrade as requested. This last time, however may have been the killer. A new upgrade was installed right before the problem became unfixable by shutting down and restarting. I'm running Firefox 15.0. I just rebooted, however, and now (for now), it's working properly.
I have no add-ons installed in Firefox.
My only plug-ins are iPhotoPhotocast, QuickTime, SharePoint, and Shockwave Flash.
I've seen multiple reports of this problem on this Web site, but no solutions. Just a generic recommendation to disable add-ons to see which one is conflicting. But I'm running no add-ons. I think there's a bug in Firefox.

If it were an extension or theme or a Mac driver, wouldn't it cause the problem consistently? This only happens after Firefox has been running for a while. I'm using Firefox to type this reply right now, and the problem is not happening.
And it's not because I suddenly start using some offending software. As I said, I don't use the Mac as my main computer. Usually I'll have been using my PC, I'll go back to the Mac to check my email on Firefox, and suddenly the link problem is happening. I only use the Mac to check email on the server before I download it with Outlook (on the PC) so I can delete spam on the server first.

Compaq Presario CQ62 DVD not working after Windows 7 automatic install of upgrades

The DVD in my Compaq CQ62 stopped working after Windows 7 automatically installed updates. The driver seems to be corrupted. When I open Device Manager, the DVD comes up as hp DVD RW AD-7701H SATA CdRom Device and the device status displays...A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32).. There are two drivers installed--cdrom.sys from Microsoft, File Version 6.1.7600.16385(win7_rtm.090713-1255) and PxHlpa64.sys File Version 2.03.32a from Sonic Solutions. If anyone knows the link to download the new driver or how to resolve this problem please let me know.

We are not sure what might have caused this issue. You may try removing the affected filter drivers and check. This has helped few.
To do this, follow these steps:
1. Click Start , type regedit in the Start Search box, and then click regedit in the Programs list.
If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer.
Note After you remove the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall any affected programs.
See which Windows updates are installed
http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

Sync not working seems snyc has been a problem from day one and has never been fixed.

I have been trying to get sync to work for a long time and it just won't. I have deleted my accounts and redid them with the new version of sync and still not working. I just get errors saying it can't sync. I can log in but don't matter. Please fix your sync. i have tried firefox, firefox beta and now Aurora.

Since I switched back to firefox beta from Aurora I can't reproduce the error but it would just pop up at the bottom of the browser with an error saying Can't sync. I don't remember what the wording was I think it could not contact the server. But now that I went back to the beta its using the old sync and there is no way to set up with the new sync. This old version uses the pairing a device with code. I can't set that one up becuase all old accounts have been deleted and a new one created with the new sycn. It uses email and a password. There is no place to sign in with firefox or firefox beta for the new sync accounts. I went to Aurora because the old sync would not work either. I have tried everything your forms offered and nothing works. I kept getting can't sync and or can't sign in bad user name or password and I have the correct info. Your sync sucks it never works right and has been like this for a long time. I am now back on firefox beta but I do miss the new feathers in Aurora. So I have to just not use your sync and back up daily my bookmarks. And now I can't log into sync from here https://account.services.mozilla.com/ because it now says user name and or password not right and it is right. This is why using your sync is just not worth the frustration.

IOS 7 app store update list does not clear after updates have been installed

iOS 7 app store update list does not clear after updates have been installed

Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck.

Security tab in Options is not working after Firefox 6 has been installed please help

Similar Messages

Maybe you are looking for