Security update 2011-011 caused problems for Wacom tablet

I have Wacom Bamboo Fun (model CTE-650) tablet, which have since worked well after every passed "security updates". However, after I installed new Security update 2011-011, it started to act weird. I can move pen pointer on screen, but cannot select anything and can't move windows etc..
I checked the disk, verified and repair permissions, and also tried to install most recent Wacom tablet driver but nothing have helped so far. Does anyone experienced this? Any solutions..?

I too have problem with my Wacom Bamboo Fun tablet (in this case the CTE-450). It acts as normal mouse, it does not map to the screen coordinates, only to up. down, left right movement.
When I open the Tablet preference pane, it tells me it does not detect any tablet. I restarted, and nothing. I reinstalled the latest driver (Driver 5.2.4-4(RC) for OS X 10.6, 10.5 & 10.4 (PPC & Intel) from 15 Feb 2011) and still does not work.
Apple... is it you who invalidated my valuable piece of hardware?

Similar Messages

Security Update 2008-002 - causes problems??

After finally downloading and installing my security update I am left wondering if it causes problems! In my Cubase SX 4.1 I have just tried to export an audio mix and keep getting the message "Unknown Error"! I have contacted Steinberg support and having tried everything they are baffled and point the finger towards the Mac. Before installing the security update I had no such problem! This new computer, operating system or the pentium chips seem very buggy to me now. On my previous computer (Power PC) everything worked fine! With deadline's and mixes to complete, does anyone know of issues or how to solve the problem? I have done everything possible with Steinberg including reinstalling the program.
Thanks in advance...

Greetings,
If you are using Time Machine, you can simply go back to a day before the Update and see if that helps.
Cheers,
M.

Security Update 2011-001 causes InterView alert

I have update with SecUpd2011-001 for OSX 10.5.8 and now whenever I open my browser (Safari or FF) an alert appears which says "InterView Software not installed correctly, please re-install".
I have never had InterView software on my mac and cannot get rid of this message. I think it might be a conflict with Flash or Adobe plugins but not sure, has anyone else had the same problem?
I will try reinstalling the plugins and post my results.

Don't confuse memory & hard drive space. Running applications uses memory; storing files (application or document) use hard drive space. If you run memory-hungry apps, you may need to increase the RAM in your Mac to avoid slowdowns due to your Mac swapping data in memory (RAM) out to the hard drive. If you don't have adequate hard drive space to spare for this (usually 5 GB minimum, or 10% or more of your hard drive's free space), you may get crashes or other problems.
In any case, deleting files (from the hard drive) won't change the amount of memory (RAM) your Mac uses. That is controlled by the OS, in response to the demand of the application(s) you run. OS X has very good memory management; generally, all you will see is slowdowns if the demand is greater than the installed RAM can handle.
Are you seeing any problems, or are you just concerned that memory use is higher than you expect?

Could Security Update 2011-005 have caused WiFi slowdown?

I created this post earlier today:
https://discussions.apple.com/message/16156444#16156444
I just realized that both computers have installed Security Update 2011-005 just recently (right before this problem started).
Could that have caused the problem?

Could that have caused the problem?
Very unlikely. Millions of users have updated their Macs. The forum would be flooded with posts about this if there were an issue.
Did you completely power cycle your entire network after the update?

Have been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's and the same if I click a link on the page.

been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's.'''bold text'''

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Getting this:You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?

I am getting this message: You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?
is there a way to install this update?

Hello
More information would be useful, for example which Mac OS are you running.
On the left menu item  About this Mac provides useful information.
Also did you use Software Update to determine the update?
Using Software Update can ensure you download and install the correct package for your particular Mac and OS version.

Problem after install Security Update 2011-003

hi
after after install Security Update 2011-003
i can't open App like mail, safari and more.
any idea
Benny

Process:         Safari [400]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ??? (???)
Build Info:      WebBrowser-75332101~1
Code Type:       X86 (Native)
Parent Process: launchd [212]
Date/Time:       2011-06-01 02:54:16.134 +0300
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore. framework/Versions/A/WebCore: truncated fat file. file length=12320768, but needed slice goes to 35270944
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <39AC3185-E633-68AA-7CD6-1230E7F1CEF4> /usr/lib/dyld
q

Unable to Reboot After Latest Apple Updates (SA-2011-06-23-1 and Security Update 2011-004)

Hi All,
After applying today's updates (06/23/2011) in APPLE-SA-2011-06-23-1 Mac OS X v10.6.8 and Security Update 2011-004, my MacBook will no longer boot. Prior to updating, the MacBook workked perfectly (except for the occasional error entry in the system and kernel log). The MackBook model number is A1278, with a RAM upgrade (4 GB).
When booting in NORMAL mode, the grey screen with Apple logo (and spinning wheel) is shown for about 50 seconds. The device never shows the blue background or login window. It simply shuts down like the power was pulled.
When booting in SAFE mode, the grey screen with Apple logo (and spinning wheel) is shown for about 1 minute 30 seconds. The blue background is shown and quickly transitions to the login windows. About 45 seconds after the login window is shown, the machine shuts down like the power was pulled.
On the few occassions I logged in to take advantage of the 45 second safe mode window (before shutdown), I was *not* able to copy off my log files (in /log/var) to a thumb drive because the computer would not mount the USB device.
When I peeked at the system's log file, I caught the tail end of "signature validation failed" for a bunch of hardware - from video to audio. I can only peek because the computer will shutdown before I have an opportunity to study anything in detail. The failed verifications may or may not be related to the shutdown - signature verfication might be disabled in safe mode; I simply don't know.
It seems the world's most advanced operating system [tm] is performing the world's most epic failure. Any ideas to get this brick working again would be greatly appreciated.
Jeffrey Walton
Baltimore, MD, US

Here's what I've found:
(1) I cannot run Disk Utility because I don't have my install disk handy
(2) I cannot run Repair Permissions because Apple does not make a separate ISO available to fix their mistakes
(3) There does not appear to be a wat to back out updates (ie, no Add/Remove Programs)
I was able to boot into safe mode and perform:
> sudo bash
$ chmod -R root /
Amazingly, the command ran to completion. Unfortunately, it did not fix the problem. As soon as some spare cycles were available (interesting indeed!), the machine shutdown.
+1 to Apple engineers for creating a broken patch
+1 to Apple quality assurance for letting the junk out the door
+1 to Apple, for not offering an ISO to fix a broken installation
+1 to Steve, who has managed to keep his anti-trust lock on the hardware and broken software
Great job, Apple

Security update 2011-003 cannot install

I've tried everything on multiple computer to install the Security update 2011-003. At first, it downloads, but it stalls during installation. Then I downloaded the install direct from Apple. It installed, but stalled saying it had 1 minute until completion. That lasted over an hour. I ran disk utility, then the direct install again and the same thing happened: installed until 1 minute until completion and stalls.
Anybody else with the problem and solutions?

Exactly which version of Mac OS are you on? 10.6.?
And, which model Mac do you have?
The security update is for OS 10.6.7 only. Not sure if the new 2011 iMacs need the update or not.

Error in downloading security update 2011-006

Hi good day!
I cannot download the latest security update 2011-006 to my macbook pro. The message says "security update 2011-006" can't be saved". My internet connetion is working. Can you help me on this? My other concern is that I cannot download to my iPhone 3G S the IOS 5. It always stopped downloading. Are these two things related to each other? Please help.
Thanks

Excellent
So many folks fail to run Disk Utility B4 d/loading or system changes.
Also wouldn't hurt to do a backup B4 any actions outlined
( Had a flu shot earlier today and it knocked me for a loop... I wasn't able to post )
Let 'er rip and...
cheers

Security Update 2011-003 (Snow Leopard ONLY - Really, Really?!?!?!)

What anyone who doesn't have Snow Leopard isn't at risk of getting tagged by dreaded "Mac Defender" Trojan Horse???
Come Apple Snow Leopard isn't the only OS that is at risk, you really should make this avaible to ALL Mac users, not just those who have purchased and installed Snow Leopard.

Eric Schwarzkopf wrote:
What anyone who doesn't have Snow Leopard isn't at risk of getting tagged by dreaded "Mac Defender" Trojan Horse???
Come Apple Snow Leopard isn't the only OS that is at risk, you really should make this avaible to ALL Mac users, not just those who have purchased and installed Snow Leopard.
It would apparently have been a much bigger undertaking to provide similar functionality for earlier systems. You'd probably have to start from scratch, whereas for Snow Leopard it's a small update to a pre-existing feature. This isn't to say, though, that Apple shouldn't have provided something for earlier systems anyway.
From
About Security Update 2011-003:
Description: The OSX.MacDefender.A definition has been added to the malware check within File Quarantine.
The "File Quarantine" check for "potentially unsafe files" began with OS X v10.5, but the addition of a specific "malware check" feature using a list of known malware was new in Snow Leopard.
From
About file quarantine in Mac OS X v10.5 and v10.6:
Snow Leopard checks for malware
Mac OS X v10.6 Snow Leopard builds upon the existing unsafe file type check by also checking for known instances of "malware", or malicious software. When you open a quarantined file, the file quarantine feature will check to see if it may include known malware.

Finder restart every two seconds! After install security update 2011-005

After install security update 2011-005, I rebot my computer and every seemed normal, until I saw that started to restart the finder.
Help me! please.
PD: I try to delete the famous "com.apple.finder.plist" but I can't found them.
Is a MacBook Pro 13'' mid 2009 OS X Lion (10.7.1)

You may be able to repair this with 10.4.8 PPC Combo Update
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj
[email protected]

HT204053 I have downloaded Lion onto my MacBook Pro. My husband and I share a desktop. Can download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use.

I have downloaded Lion onto my MacBook Pro. My husband and I share a desktop. Can we download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use?

Yes. In the future, however, only you will be able to update Lion because it will now require your Apple ID.

[svn] 863: Cleanup the jsp for some space issue that causes problem for proxy test on WAS .

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

Does adding V-Card to signature cause problems for Outlook (Windows) users?

Hi -
I want to add a V-Card to my signature in Apple Mail (by drag and drop from address book to signature pane in Mail>Preferences). I have read that, in the past, this can caused problems for some recipients who use Windows Outlook.
Is this still the case? If so, how can I add a V-Card to my signature without causing problems for recipients?
Thanks -
Doug

I take note of your WNLB recommendation but in this case the error start on one of the CAS server first and client connected to the CAS that does not have any errors continue to work as normal.
I upgraded to SP3 late last year. This problem first happened in Feb 2014.
Have you checked the DNS settings on the VM - yes, and both of them are pointing to one of our DC's.
I would set the client with a Host file to just one CAS to rule out the WNLB - this would be too hard
to manage as when the issue happens again it could happen on CAS1 but the client could be connected to CAS2 so it wont experience the issue.

Security update 2011-011 caused problems for Wacom tablet

Similar Messages

Maybe you are looking for