Security Update 2014-002 1.0 for OS X

Hi i installed Security Update 2014-002 1.0 for OS X
and following that i had 3 completely random system freezes, each one of those
reqired a restart
i reinstalled 10.8.5 base system to revert back the update and the freezes are gone
anyone experienced such freezes after that?
i mean what kind of a security update is one that freezes my machine?

http://support.apple.com/kb/DL1737 is the one you should download after backing up and repairing permissions.

Similar Messages

Download notification for Security Update 2014-002 does not go away after update

I have downloaded the Security Update 2014-002 4 times tonight, it shows up in the downloaded and installed list, but it still is showing up as an update ready to download. I restarted my machine each time, but it still is showing up in the update notifications. Can anyone help?
Thanks,
George

Go to the command line of the appliacne and run "version"
That will show you the current version of the firmware.
If you have record of what was there, you can compare...
Otherwise contact TAC, they can verify that you have the up-to-date version and pull your serial from the distribution list so you don't see it any more.
Ken

Slow Sleep Wake-Up after Security Update 2014-002 MacBook Air

Hello! I have a 2013 August MacBook Air. I experienced the "screen goes black, hard restart" issue for many months until one of the updates cured that issues, thank goodness. I just updated with Security Update 2014-002 and just noticed it took about 20 seconds for my MacBook Air to wake-up from sleep mode. I was fearful it was back to the "black screen, no wake-up" issue with this update, however when it finally came back up I was relieved albeit very cautious now. Anyone else have this same issue?

Hello macforme
If you are having issues with waking from sleep and slow startup times, then check out the article below. The main thing to try is to reset the SMC and NVRAM as a starting point sort the issue out.
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Regards,
-Norm G.

Just installed security update 2014-002, now Itunes will not open. Have rstrated but no change, need help to fix, please

Just installed security update 2014-002, now Itunes will not open, I have rebooted twice with no effect, I don't know what else to do to get my itunes back. Need help please

Believe I've firxed my problem, at least, ITunes is now working again. I followed the information provided from a couple of posts on this thread, (1) re restarting with command-s held down; did it twice, made no differerence; (2) manually re-installed the Security update; no difference; each time restarting, no effect; (3) shutdown the computer; I did for 35 minutes, upon restart, ITunes is back to normal, seems to be working fine. Turning the computer off must clear the cache?

Security Update 2014-002 Black boxes and screen sticking

Today after installing the security update 2014-002 on mavericks i am getting black boxes or black backgrounds when shifting screens. In Safari when i am scrolling down it is behaving the same way displaying text and pictures stuck wile moving. Is there any way to get one step back or to delete the new update. Please, help me solving this issue. I shouldn't had updated. The updates are so unreliable.
I went to safe mode and it becomes worse in safe mode.

I connected the charger many times it didn't worked. Yes exactly it stopped charging. Then i tried again and again removing and moving the pin and it worked suddenly. i wasn't able to imagine that i purchased it in 2014 January. How it is possible that the brand new and so expensive item behave like this.
The problem i was facing is solved too after this behavior. As soon as my laptop started charging i switch from one screen to another right/left dashboard. Scroll up/down in safari. It is moving the same as before amazing fast.
I didn't installed or uninstalled anything as others did. I didn't understood at all how come the charger was stopped charging and how such awkard problems happened that made the laptop so slow that it behaves like it is dying or maybe something went wrong with the graphic card.
Thanks for helping.

HT3964 Security Update 2014-002 version 1.0 Issues

My MacBook Air was working fine until the Security Update 2014-002 version 1.0 was installed on Apr 24, 2014. Ever since then, it goes into deep hibernation or shutdown/restart on its own. How would I resolve this without a TimeMachine backup? Thank-you.

Hey there MAK-SJ,
It sounds like your computer is going to sleep and/or restarting by itself after a recent update. I would start by checking to see if there are any Hot Corners that may have gotten enabled somehow with this:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Your computer sleeps at unexpected times
Make sure you have not set a Hot Corner that tells the display to sleep, or the computer to sleep.
See the following related articles for this symptom.
OS X: If your computer screen goes black
Magnets in devices may cause computer to sleep unexpectedly
If this is not the case, I would use the troubleshooting from the Additional Troubleshooting section of the article down toward the bottom.
Thank you for using Apple Support Communities.
All the best,
Sterling

HT1222 Security Update 2014-002 it won't allow my macbook to update. HELP!!

HELP!!
For myself to have the Security Update 2014-002 it won't allow my macbook to update.
After i check the checkbox of Security Update 2014-002, it tells me to restart but i restarted
about 4 times & it never really updated itself. Can Somebody help me how do solve this?
Currently I have Operating System X Lion.

http://support.apple.com/kb/DL1738

Black screen after sleep Mavericks security update 2014-002

I get a black screen for about 10-20 seconds on waking from computer sleep/display sleep after installing security update 2014-002 for Mavericks. The computer is awake, because I can click and change windows, pointer/cursor placement, etc., from before the time the computer went to sleep. Never had this problem before this latest update.

If the resets don't help try the following in order as necessary:
1 - boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both the disk and disk permissions. Reboot normally and check for improvements.
2 - boot into the Recovery volume (boot with the Command + R keys held down) and reinstall the system.
OT

Security Update 2014-002 breaks Active Directory

Installed Security Update 2014-002 and now Macs in our office are unable to communicate with the domain controller, and new machines with the update can't bind to the domain.
My specific machine is a 2013 Mac Pro with OS 10.9.2.
Anyone else?

I connected the charger many times it didn't worked. Yes exactly it stopped charging. Then i tried again and again removing and moving the pin and it worked suddenly. i wasn't able to imagine that i purchased it in 2014 January. How it is possible that the brand new and so expensive item behave like this.
The problem i was facing is solved too after this behavior. As soon as my laptop started charging i switch from one screen to another right/left dashboard. Scroll up/down in safari. It is moving the same as before amazing fast.
I didn't installed or uninstalled anything as others did. I didn't understood at all how come the charger was stopped charging and how such awkard problems happened that made the laptop so slow that it behaves like it is dying or maybe something went wrong with the graphic card.
Thanks for helping.

Security update 2014-002 and boot up time

Hi all,
After installing the Security Update 2014-002, my Mac Pro is taking over 10 minutes to start. I get a grey screen and eventually the Apple logo appears.
I've unplugged everything from the computer and repair permissions already. I've tried to boot in recovery mode, but it never seems to start (waiting on the grey screen for over 20 minutes while my fingers are on the keys isn't a fun time).
Any suggestions would help. Thanks.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

Security update 2014-002 1.0

Security Update 2014-002 1.0 appears in the list of updates for installation. I have tried to install 4 times now. The update appears in the installed list 4 times but has not cleared from the ready for installation area. Is this a problem? How can I clear the ready for installation entry.

http://support.apple.com/kb/DL1737 is the one you should download after backing up and repairing permissions.

HT6207 Fails to establish VPN connection after Security Update 2014-002

I have successfully used a VPN service with Mac OS 10.7, 10,8 and 10.9. After an update with Security Update 2014-002 connection requests are directy rejected by the MacOS. When looking into the VPN-log, the same set of 4 messages is logged after each attempt:
publish_entry SCDSet() failed: Success!
publish_entry SCDSet() failed: Success!
Fatal signal 13
can't talk to PPPController : Broken pipe
Is there a known remedy?
/andersbl

The VPN connection to this specific servcie provider has worked for me with previous MacOS and with 10.9. It now fails and the only change to my Macs are that I loaded the Security Update 2014-002 in the of April. I checked by adding the exactly same VPN connection definition to a 10.6 Mac and connected from the same LAN. This succeeded. Thus I suspect the Security Update, or that there is some paramater that now needs to be defined/changed.

2nd cd/dvd drive not recognized after security update 2014-002

I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer. It does not even show up under "About This Mac" or as a drive in disk utility. Worked fine up until this update. Any ideas?
Thanks

I think I have solved my own problem. After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine. I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

HT6207 Macbook Pro getting stuck after security update 2014-002

After installing this security update, my mac is acting up, sometimes I am getting a split screen on safari sometimes and then the sometimes computer is hanging up and also when I am using non apple softwares like vlc player or yahoo messenger the mac hangs up? Is it normal?

The VPN connection to this specific servcie provider has worked for me with previous MacOS and with 10.9. It now fails and the only change to my Macs are that I loaded the Security Update 2014-002 in the of April. I checked by adding the exactly same VPN connection definition to a 10.6 Mac and connected from the same LAN. This succeeded. Thus I suspect the Security Update, or that there is some paramater that now needs to be defined/changed.

Restarting taking forever after Security Update 2014-002

I just downloaded Security Update 2014-002 and my Mac Mini is taking forever to restart after the download and installation process finished. I'm running the latest version of Mavericks and my Mac is stuck on restart! What should I do?
Need help! Thanks.

Tap the space bar on your keyboard once. The dispaly may be sleeping.
The first restart after the update here was longer than usual but I restarted one more time, it was back to normal boot time.
After the restart, open the App Store then select Updates from the menu.
It should say: Verio 1.0 Installed Apr 22, 2014

Security Update 2014-002 1.0 for OS X

Similar Messages

Maybe you are looking for