Security Update 2014-005 1.0 is trying to install a second time
Security Update 2014-005 1.0 has already been installed and is part of the "Updates Installed in the Last 30 Days" Above that there is "1 Update Available" but it is the same one I have already installed. Unfortunately, I didn't pay attention to it at first and tried to finish installing it by hitting the RESTART button..... the iMac tried to restart but stayed doing the spinning circle of death.... I waited for 30mins and nothing happened. I ended up unplugging the power a restarted the iMac and it appears to be running fine. However, 1 available update remains and continues prompting to install. How can I clear this update???
Then the problem is on your computer or you are running Yosemite. If it's the former then start with:
Repair the Hard Drive and Permissions - Yosemite, Mavericks, Mountain Lion or Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Similar Messages
-
Bootcamp issue with Security Update 2014-005.
My MacBook Pro with Bootcamp won't boot in Windows 8.1 mode after the recent Security Update 2014-005. Any suggestions on how to diagnose and repair the startup.
I am using a MacBook Pro (13 inch, Mid 2012) with a 2.5 GHz Intel Core i5, 4 GB 1600 MHz DDR3 with a Macintosh HD.Keiths-MacBook-Pro:~ $ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 249.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data BOOTCAMP 250.0 GB disk0s4
Keiths-MacBook-Pro:~ $ diskutil cs list
No CoreStorage logical volume groups found
Keiths-MacBook-Pro:~ $ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 976773167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 486812704 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
487222344 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
488491880 1176
488493056 488280064 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 Sec GPT table
976773167 1 Sec GPT header -
Gray spot since Security Update 2014-005 1.0 ?
Hello, yesterday I installed “Security Update 2014-005 1.0” on a Mid 2010 27’’ iMac running Mavericks 10.9.5 and a small gray spot appeared at the upper left corner of the screen, above the Apple logo. I know that dust enters sometimes to the screen but this is something different. It looks as if the pixels of that area were darkened (but not completely turned off). The spot remains the same size when applying the zoom or changing screen resolution. On white backgrounds it almost disappears. It is not reflected on screen captures.
Later on, I upgraded the system to Yosemite but the spot remained.
It’s about half a centimeter so maybe it’s just a coincidence that I noticed it exactly after installing the security update.
Anyone experiencing something similar?I discovered another problem: Image retention.
The picture is from the menu bar area, it reads “Safari Archivo Edición” (“Safari File Edit” in english). The other spots are just dust from my camera lens.
Image retention only appears around that upper left corner area of the screen. I’m doing tests to see how permanent the retention is. It could be that the screen is physically damaged, but maybe it’s just a software bug since I noticed the gray dark spot only after installing the software updates. -
Outlook from Office 2011 can't start after OS X Security Update 2014-005
I just installed Security Update 2014-005 on OS X v10.9.5 in a MacBook Pro (2012). After the OS restarts, Microsoft Outlook from Office 2011 fails to start. Did anyone else experience this issue and have a solution that can be shared?
Try u-installing Office and re-installing.
Office 2011 Removal
Office 2011 Removal (2) -
Apple Mail with OSX 10.9.5 quits on launch when mail window opens. May be related to install of Security update 2014-005. Any suggestions on fixing this?
Here is the beginning of the Problem details error message:
Process:
Mail [763]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
7.3 (1878.6)
Build Info:
Mail-1878006000000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [264]
Responsible:
Mail [763]
User ID:
501
Date/Time:
2014-10-20 15:23:32.902 -0800
OS Version:
Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 1058C7CE-141A-982C-2F1D-4F0EB47F37A1
Crashed Thread: 10 Dispatch queue: NSOperationQueue Serial Queue
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSKeyPathExpression objectForKey:]: unrecognized selector sent to instance 0x60000045ff20'
abort() called
terminating with uncaught exception of type NSExceptionTry a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About -
HT6531 Anyone else getting kernel panics after Security update 2014-005?
I have a user with a brand new MBP, running 10.9.5 who installed Security Update 2014-005 on Friday morning. Ever since then, the machine has been crashing with kernel panics. We've done the usual Disk Util, etc. and it keeps happening. It would be terribly disruptive to have to rebuild the entire machine.
The links to Apple Support articles sometimes won't load in Safari.
Startup – Computer restarts by itself – Mountain Lion -
Slow Sleep Wake-Up after Security Update 2014-002 MacBook Air
Hello! I have a 2013 August MacBook Air. I experienced the "screen goes black, hard restart" issue for many months until one of the updates cured that issues, thank goodness. I just updated with Security Update 2014-002 and just noticed it took about 20 seconds for my MacBook Air to wake-up from sleep mode. I was fearful it was back to the "black screen, no wake-up" issue with this update, however when it finally came back up I was relieved albeit very cautious now. Anyone else have this same issue?
Hello macforme
If you are having issues with waking from sleep and slow startup times, then check out the article below. The main thing to try is to reset the SMC and NVRAM as a starting point sort the issue out.
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Regards,
-Norm G. -
Security Update 2010-005 for Facetime
Hi,
I have downloaded Face-time Beta to be installed on my iMac OS 10.5.8.
During Installation i get a message that I need to install first "Security Update 2010-005 using software update"
My software update shows no update required. Nevertheless, I have downloaded all 5 security updates and installed them one after the other, with no problems.
Still i get the same message that Security Update 2010-005 needed when I try to install the Facetime.
Can anybody knows a way out of this loop ? or how do I "Inform" the software update that the Security update 2010-005 is already installed ?
thanks,Yes, you'd need to buy it - it's available widely for $29 (Apple store or resellers); you can then update to 10.6.4 - use the combo updater available here:
http://support.apple.com/kb/DL1048
(updates for an OS are available for free, but you do have to pay for the initial upgrade to another OS).
Edit: And when you're doing the updates to 10.6.4, don't forget to repair permissions after each update.
Message was edited by: Barbara Daniels1 -
Hi, I'm trying to load Facetime on my MacBook and it says "You are missing a critical security patch. Please use Software Update to install Security Update 2010-005". I've checked and all my software is updated. What do I do?
First off, iOS 5 will not run on Macs. You need to give us your Mac OS X on your Mac to determine which security update you need. Go to Apple menu -> About This Mac. And then read the link here:
http://support.apple.com/kb/HT1222 -
Yesterday (april 22) I install the last Security Update 2014–002 from the Mac App Store. After rebooting the computer, I haven't been able to run some apps I use frequently, such as Boom Device, Dropbox, Google Drive, wich didn't show in the menu bar anymore and don't run even when clicking on their icons; or apps like Audacity (open source sound editor), All2mp3 (sound files converter to mp3); and other apps bought from the Mac App Store, as Funtastic Photos. This problem affects even applications as Word, Excel and Powerpoint... I think the problem has reached it's highest levels and I would like to know what can I do in order to reverse my iMac to a "normal" life... I should say that I haven't had any problems with any of the several Web Browsers I commonly use...
I have the sam problem with Firefox and Word. Annoying, please help me. Word does not open at all(still Excel and Powerpoint do, Firefox get a lot of problems, and shuts down.
-
Unable to install the security update 2014-002 1.0 on 10.9.2
I'm trying to update my Mac Book AIR 1.7 GHZ i5 4 GB with the security update 2014-002 1.0 on 10.9.2. After downloading via Mac App Store it restarts the machine and shows a message "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." Next Maverick starts normal and isn't updated. i tried this several times. Alternatively i downloaded the SecUpd2014-002Mavericks.dmg manually directly from Apple but then i get an error that the DMG is corrupt so i can't start the update. I also downloaded the OSXUpdCombo10.9.3_13D45a.pkg but while running the installer it verifies the package with the result "Beim Extrahieren von Dateien aus dem Paket OSXUpdCombo10.9.3_13D45a.pkg ist ein Fehler aufgetreten." Any ideas?
install.log -> search: "error"
May 2 17:37:52 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4840b2e0 {NSUnderlyingError=0x7fdd4aa2d4b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4c1eb310 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:37:52 USERs-MacBook-Air.local Installer[364]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f88a3c936a0 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f88a1433da0 "archive verify failed"}
May 2 17:57:32 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4be94350 {NSUnderlyingError=0x7fdd4be639b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/905EE9AF-A09C-41B4-A499-BBC7CBF8EE21.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4be66f70 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29908846, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:57:33 USERs-MacBook-Air.local softwareupdated (200)[294]: SoftwareUpdate: extraction error on install of zzz031-01022 (reset to download error state to allow retry): Error Domain=SUErrorDomain Code=311 "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." UserInfo=0x7fe9fb2536a0 {SUErrorUpdateTitle=Sicherheitsupdate 2014-002, SUErrorUpdateProductKey=zzz031-01022, NSLocalizedDescription=Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut.}
ErrorCode = 311;
ErrorDomain = SUErrorDomain;
State = Error;
May 3 03:13:20 USERs-MacBook-Air.local installd[3605]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f8651614cf0 {NSUnderlyingError=0x7f865158e4a0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/4B96CA6E-3B5B-4D06-A6C1-4EA3D5870BF7.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f8653a1d360 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29933100, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local installd[5628]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9b24957020 {NSUnderlyingError=0x7f9b23b108c0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f9b216eb370 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local Installer[5617]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9cc541e860 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f9cc5450cb0 "archive verify failed"}I'm trying to update my Mac Book AIR 1.7 GHZ i5 4 GB with the security update 2014-002 1.0 on 10.9.2. After downloading via Mac App Store it restarts the machine and shows a message "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." Next Maverick starts normal and isn't updated. i tried this several times. Alternatively i downloaded the SecUpd2014-002Mavericks.dmg manually directly from Apple but then i get an error that the DMG is corrupt so i can't start the update. I also downloaded the OSXUpdCombo10.9.3_13D45a.pkg but while running the installer it verifies the package with the result "Beim Extrahieren von Dateien aus dem Paket OSXUpdCombo10.9.3_13D45a.pkg ist ein Fehler aufgetreten." Any ideas?
install.log -> search: "error"
May 2 17:37:52 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4840b2e0 {NSUnderlyingError=0x7fdd4aa2d4b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4c1eb310 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:37:52 USERs-MacBook-Air.local Installer[364]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f88a3c936a0 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f88a1433da0 "archive verify failed"}
May 2 17:57:32 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4be94350 {NSUnderlyingError=0x7fdd4be639b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/905EE9AF-A09C-41B4-A499-BBC7CBF8EE21.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4be66f70 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29908846, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:57:33 USERs-MacBook-Air.local softwareupdated (200)[294]: SoftwareUpdate: extraction error on install of zzz031-01022 (reset to download error state to allow retry): Error Domain=SUErrorDomain Code=311 "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." UserInfo=0x7fe9fb2536a0 {SUErrorUpdateTitle=Sicherheitsupdate 2014-002, SUErrorUpdateProductKey=zzz031-01022, NSLocalizedDescription=Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut.}
ErrorCode = 311;
ErrorDomain = SUErrorDomain;
State = Error;
May 3 03:13:20 USERs-MacBook-Air.local installd[3605]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f8651614cf0 {NSUnderlyingError=0x7f865158e4a0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/4B96CA6E-3B5B-4D06-A6C1-4EA3D5870BF7.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f8653a1d360 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29933100, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local installd[5628]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9b24957020 {NSUnderlyingError=0x7f9b23b108c0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f9b216eb370 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local Installer[5617]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9cc541e860 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f9cc5450cb0 "archive verify failed"} -
VPN broken after 10.6.4 Update / Security Update 2010-005
I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
Sep 24 14:18:33 gateway racoon[90950]: Connecting.
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
Sep 24 14:19:03: --- last message repeated 8 times ---
Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
Which seems to be correct to me.
As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one....I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
Sep 24 14:18:33 gateway racoon[90950]: Connecting.
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
Sep 24 14:19:03: --- last message repeated 8 times ---
Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
Which seems to be correct to me.
As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one.... -
Security Update 2010-005 Squirrelmail 1.4.20 timezones.cfg
Was an update to Squirrelmail 1.4.20 included in the Security Update 2010-005?
Is is just me or is everyone missing /usr/share/squirrelmail/include/timezones.cfg after this update?
This causes an error when trying to access the Options > Personal Information.I manually updated to 1.4.20
So *Security Update 2010-005* didn't contain an update to SquirrelMail but managed to break my install of SquirrelMail 1.4.20?
I always use a sym-link so that automatic updates don't break my manual updates. But there must have been a script in the Security Update that erased the timezones.cfg file. Even if there was a SquirrelMail update included, why would it erase the timezones.cfg file? -
Security Update 2014-002 Black boxes and screen sticking
Today after installing the security update 2014-002 on mavericks i am getting black boxes or black backgrounds when shifting screens. In Safari when i am scrolling down it is behaving the same way displaying text and pictures stuck wile moving. Is there any way to get one step back or to delete the new update. Please, help me solving this issue. I shouldn't had updated. The updates are so unreliable.
I went to safe mode and it becomes worse in safe mode.I connected the charger many times it didn't worked. Yes exactly it stopped charging. Then i tried again and again removing and moving the pin and it worked suddenly. i wasn't able to imagine that i purchased it in 2014 January. How it is possible that the brand new and so expensive item behave like this.
The problem i was facing is solved too after this behavior. As soon as my laptop started charging i switch from one screen to another right/left dashboard. Scroll up/down in safari. It is moving the same as before amazing fast.
I didn't installed or uninstalled anything as others did. I didn't understood at all how come the charger was stopped charging and how such awkard problems happened that made the laptop so slow that it behaves like it is dying or maybe something went wrong with the graphic card.
Thanks for helping. -
Security update 2014-002 grey sceen
Hi, I have tried to install security update 2014-002. It tells me that a restart is required. It takes me to a grey screen an installer of some sort an then hangs.
I turned it off. Started it again, It has removed my desktop picture and still shows that I require the update to be installed also I noticed that it show the update has been install.
anyone????
Regards
NeicoIf you are able to get back to the normal desktop screen, backup your data.
To apply the update, download it directly from:
http://support.apple.com/kb/DL1740
And then run its installer.
If Software Update still shows it, you can set it to ignore the update.
Repair permissions when done installing it, as sometimes a few might get messed up.
Note: Permissions Repair will always show some needing repair no matter how many times you repair it. That should not be of concern.
Maybe you are looking for
-
I have an iPhone 5 and a MBA. My iTunes library is on an external harddrive. I need to clear up space on my iPhone as well as back it up. I can't update it because there isn't enough space on the phone. I can't clear space because most of it is pictu
-
hi experts At what level master data's will create ie g/l mater data, customer master data, vendor master data, material master data and bank master data, company code level or client level? if its client level whats is the main reason? regards ba
-
Drop down/drill down for the report
HI I have a requirement to have a kind of drop down menu on the heading level. So that if the data is say sales by model, on the invoice_date column, the user would have the option to look at this weeks' invoices, this months, etc. I know there are P
-
What is the latest firmware for G5 dual processor?
How do I find it? The downloads section seems to be complex.
-
Export Audition Spectral Display to After Effects
I want to analyze sounds in Audition, then export the combined waveform and spectral displays, along with the sounds, to After Effects, where I will add text. First step, I suppose, would be to save Audition display (as .mov, I suppose). Is this cor