Security update error

I have tried to install the 2011-006 Security update running Snow Leopard. It failed and now I can't access Software Update or Safari.

Ok, I wasn't patient enough to wait for this reply and now I have it totally buggered up. I found my 10.5 start up disk, started up the system and attempted to restore my Time Machine backup from about a week ago. Seemed to go ok - until it went to restart. Blue screen of death. I can't get the disk out and can't seem to find a way to start up off the disk. I restarted a couple of times this morning and just get catastrophic failure.
Thanks for any help - if I can get the disk out, that would be a good start. I'm using a MS keyboard, but I can reattach the Apple if necessary.
In 25+ years of using Macs, I haven't dug a hole this deep!!!
Mike

Similar Messages

Windows security update error code 80092004

I am repeatedly trying to update my windows security setting via windows vista update. One important update was not completed with consistent accuracy. its called error code 80092004. The hard disk has plenty of space, the update was 8.5mb, it always hung on 11% without going further during download and the the error code is flashed with red buttons to say one one imporatn update has failed. I did this umpteen times over a few days now withou success. Can anyone help?

I am repeatedly trying to update my windows security setting via windows 7 home basic 64 bit update.
One important update was not completed with consistent accuracy. its called error code 80092004 as cumalative security update for internet explorer 11 for window 7 for x 64-based systems (KB3038314) during window update after just reinstallation /recovery
of operating system & vaio updates.The hard disk has plenty of space, the update was 42.7mb, it always hung on 11% without going further during download and the the error code is flashed with red buttons to say one one important update has failed. I did
this above afford more times by one by one over 2 days without success. Can anyone help? plz solve my issue with proper link

Security Update Error Code 84BC7381

Hi,
I have tried to install this update many times and it always seems to fail to install - Keep getting error code 84BC7381 Security update for SQL Server 2008 Service Pack 2 (KB2977320).
Can you let me know how to get this installed.
Thank you,
David

Hi David,
It seems that this update is only provided for following systems:
Supported Operating System
Windows 7, Windows 8, Windows 8.1, Windows Server 2008 R2 SP1, Windows Server 2012 R2
This update is applicable to SQL Server 2008 R2 SP2 instances.
If you are running Windows Vista, this update may not apply for you.
If you get proper system running on your computer, but still fail to install, please check following additional steps:
Scan system files by running this command as admin:
SFC /SCANNOW
You can also perform an In-place upgrade to repair your system before reinstalling this update:
http://support.microsoft.com/kb/2255099
Kate Li
TechNet Community Support

Latest Security Update Cause Website Login & iWeb Publishing Error?

Hello all and Happy Holidays!
I just did the latest Mac OS Security Update early this evening, but I was too sleepy and tried from work, that I disconnect all the peripherals, cables etc, but I forgot to pull out my firewire cable that was connected to a FireWire Hub (but no FW device was turned on at the time)
So I continued to do the update, restart and Repair Permission, have always been careful and so far nothing has "gone wrong" on my iMac.
But now I can't log into a particular Members' Webpage, keeps getting a Safari error page saying the server is not responding; Secondly, tonight I have tried at least 3 times trying to publish my latest blog entry on my iWeb, but it gives me the error message asking me to check my network connection.
I can surf, email, iTunes even download the latest podcast in the background while I am encountering these "small" problems.
Anyone can help? Most appreciated.
Has this got to do with the Security Update?
Thanks and cheers

Not neccesarily this particular security update, but performing any update while your firewire port was in use. Try resetting the FW port, info here, (I know it works, but resetting it might just do the trick) and see if that helps,
Miriam

E Bay Sign in no longer works after Firefox Security Update 3.6.6 , return message from eBay is error in your input while signing in

When signing in to eBay, I get an error message stating that there was an error in my input when I attempted to sign in... which also brings up the sign in page again... had no problems prior to the Firefox Security Update 3.6.6..... I can "claim " I forgot my password and using the forgotten password link... get into My eBay... but if I log out and then sign back in a day later... it's the same old thing all over again.... this browser is becoming as much a problem as Internet Explorer has been for years... Firefox used to be simple, straightforward and fast... now, there is little difference between it and the Microsoft hog... IE
== URL of affected sites ==
http://ebay.com

Any computer tech would know that it is likely not firefox causing this issue, but an incompatibility with a new ebay sign-in page and the firefox browser. The browser only does what the code on the page tells it to. I have seen the issue with other sites that work with IE or with Safari, but not firefox and some that work with firefox and IE but not Safari, it is the web developer's fault for the page that isn't working, not your browser.
---It is possible that it is a firefox issue, but it is most likely an issue with the webpage itself. I do not have a problem signing into ebay at all with firefox.

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks

Security Update Install Error

Help!!! Software Update keeps telling me that I need to load Security Update 2009-005 (Intel) ver. 1.0, but every time I try to install it I get all the way to the end and this message pops up:
The update "Security Update 2009-005 (Intel)" can't be installed" Sorry, an unexpected error occurred. The Installer package has been moved to the trash. To try again, open the package from the Finder.
I have tried about 20 times and get the same result every time! I cannot go to the iTunes store in iTunes because it says I need version 4.0.5 of Safari, but I cannot load that Safari version because it says I need the latest security update.
Can someone please help me and tell me how to get my stupid security update installed? Thanks, in advance.

Updating
Certain steps appear to minimize the risk of an update producing problems.
Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
You can also go to the step of booting into safe mode to do the install.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
[BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
[Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
[Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]

An error occurred while scanning for security updates. (0x80004003)

Has anyone seen this error: An error occurred while scanning for security updates. (0x80004003)?
This error occurs when I run the MBSA tool either locally or remote against a workstation. I also thought that the firewall may be the issue, it is not. I ran the MBSA tool on the WSUS replica and WSUS upstream server and received the same results. I
have been running the MBSA tool and have not run into this probem before.   I am running SolarWinds PatchManager on the upstream WSUS server and have recently configured the upstream and downstream servers to communicate, I imported
the certifcate from the WSUS upstream to the replica and noticed that after this we started having issues with the MBSA scans. Not sure if this is related but it is the only change between MBSA working and not working. P.S. The scan does
work when we use the offline scenario instead of pointing to the WSUS server.
Any help would be appreciated.
Thanks
bc

Yes, the log file was too large I have pasted the 2nd half after running MBSA on the server (the setting is to scan using Windows Server Update Services (WSUS) only.) This second half of the windowslog file shows errors after running MBSA
MBSA scan time was 9:44 PM
2014-07-31
19:38:35:487 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:44:14:497 216   2344
Report Uploading 4 events using cached cookie, reporting URL =
http://eus1:8530/ReportingWebService/ReportingWebService.asmx
2014-07-31
19:44:14:555 216   2344
PT     WARNING: ReportEventBatch failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-07-31
19:44:14:555 216   2344
PT     WARNING: SOAP Fault: 0x00012c
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
faultstring:Fault occurred
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
ErrorCode:ConfigChanged(2)
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
Message:(null)
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/ReportEventBatch"
2014-07-31
19:44:14:555 216   2344
PT     WARNING:
ID:2b9836c5-3159-494b-ae27-72559d089586
2014-07-31
19:44:14:555 216   2344
Report WARNING: Reporter failed to upload events with hr = 8024400d.
2014-07-31
19:45:57:201 9128   12a8
Misc   ===========
Logging initialized (build: 7.6.7600.256, tz: -0400)
===========
2014-07-31
19:45:57:201 9128   12a8
Misc   = Process: C:\Program Files\Microsoft Baseline Security Analyzer 2\mbsa.exe
2014-07-31
19:45:57:201 9128   12a8
Misc   = Module: C:\Windows\system32\wuapi.dll
2014-07-31
19:45:57:200 9128   12a8
COMAPI -------------
2014-07-31
19:45:57:201 9128   12a8
COMAPI -- START -- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:45:57:202 9128   12a8
COMAPI ---------
2014-07-31
19:45:57:218 216   2344
Agent *************
2014-07-31
19:45:57:218 9128   12a8
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:45:57:218 216   2344
Agent ** START ** Agent: Finding updates [CallerId = MBSA]
2014-07-31
19:45:57:218 216   2344
Agent *********
2014-07-31
19:45:57:218 216   2344
Agent * Include potentially superseded updates
2014-07-31
19:45:57:218 216   2344
Agent * Online = Yes; Ignore download priority = No
2014-07-31
19:45:57:218 216   2344
Agent * Criteria = "IsInstalled=0 or
IsInstalled=1"
2014-07-31
19:45:57:218 216   2344
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-31
19:45:57:218 216   2344
Agent * Search Scope = {Machine}
2014-07-31
19:45:58:410 216   2344
PT     +++++++++++ PT: Synchronizing server updates
+++++++++++
2014-07-31
19:45:58:410 216   2344
PT     + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://eus1:8530/ClientWebService/client.asmx
2014-07-31
19:46:00:453 216   2344
PT     WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-07-31
19:46:00:453 216   2344
PT     WARNING: SOAP Fault: 0x00012c
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
faultstring:Fault occurred
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
ErrorCode:ConfigChanged(2)
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
Message:(null)
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
2014-07-31
19:46:00:453 216   2344
PT     WARNING:
ID:e9b0d06e-d0c8-443f-abc9-512bc0f2cfa1
2014-07-31
19:46:00:481 216   2344
PT     Initializing simple targeting cookie,
clientId = e651f142-bc0f-467d-b416-d344215f5c0a, target group = EMCC Servers, DNS name = elf1.monarch.com
2014-07-31
19:46:00:481 216   2344
PT     Server URL =
http://eus1:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-07-31
19:46:18:451 216   2344
PT     +++++++++++
PT: Synchronizing extended update info +++++++++++
2014-07-31
19:46:18:451 216   2344
PT     + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://eus1:8530/ClientWebService/client.asmx
2014-07-31
19:46:18:893 216   2344
Agent * Added update {92AEAB02-F8FC-4527-B285-50FDC8EF3F85}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {2212D902-7C3B-408E-96A3-ECE4D00BFAE6}.101 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {490BE004-BC5C-4EEF-AC82-769542FC3A2D}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {568C1005-5178-4C13-8486-18E2C5AF4834}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216   2344
Agent Update {D9F49D05-AC6D-4A2A-8150-D2B4B730DEED}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216   2344
Agent * Added update {74844E07-2F55-40D4-9E16-E17A2815FEBE}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {3C72A908-F3CD-413D-B2BF-ECB68D24B6FE}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {50990D0B-4795-4830-9C3A-753485B2D433}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {9DB82D0B-5611-4BC1-A4B8-432FE1A3CC43}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {7BB7B30C-351D-4F8C-ABE4-5F7965635A03}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {AEF6280F-8C4D-4804-9913-407582227E75}.202 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {16BB6A11-B540-4486-AB13-F3B9789E90B5}.105 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {1B127611-D28E-4167-A1DC-243A51BC528F}.203 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {2F6F2013-2990-4FA6-8AB9-CA59DCA4E62D}.202 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {21732D13-3D34-4DD7-B663-32F2A1631EA9}.105 to search result
2014-07-31
19:46:18:893 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216   2344
Agent Update {E879EE15-340D-442C-B8A4-CF91D18C1B6B}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:893 216   2344
Agent Update {99FEC317-44CD-40B4-B67E-94C840510983}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:893 216   2344
Agent * Added update {8096C018-252D-4C32-BC9E-F33AC67ECFF1}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {ECCC4D19-3032-4C82-91AB-A31560B13F80}.205 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {BB49CC19-8847-4986-AA93-5E905421E55A}.103 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {023BB023-490F-4DF3-BCAA-9521EE8B5847}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {9676C624-58CB-4A30-B7B3-1D013CF3DBBC}.201 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {1BB3DE24-0D76-4D59-9B9E-556722BFE852}.101 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {F4695A25-0D22-4E3B-9BA9-9BBC62198C28}.103 to search result
2014-07-31
19:46:18:893 216   2344
Agent * Added update {11152F27-ACCA-4438-B21D-A0B61480D33B}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {308DE327-7354-4481-9981-DEA0FC61925E}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {16E9C62D-05B2-4E14-BFB0-CF55EDBD4F61}.106 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {C750962E-9D5E-45CE-9967-AE2D67115966}.202 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {9F7D6930-6816-423A-AF3C-C83ADFA7F612}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {497BCC31-ACF7-46E2-B664-C79FD2D39F8B}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:894 216   2344
Agent Update {E00B2634-BEF9-4C32-B2BF-DEAF7D7221E4}.102 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:894 216   2344
Agent * Added update {7738E837-B152-487B-8527-CD3A9C0E43E3}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {39757C3A-7ABE-4418-8B2A-C7EA7D88B36A}.202 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {A8968B3A-7FB5-4089-888F-4CDB14055DE9}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {E6ED643C-8611-4453-A723-9847B7BF60EB}.103 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {C499223D-2F22-4626-BBE5-F5A35E7A5854}.204 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {48BEEF41-9D2D-4E72-9A61-59F98B12C07A}.204 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {2661BD46-2980-4FCF-A062-B3A0C7820663}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {DC548E48-407C-48E1-ACA4-6B4C0DF14E69}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {ED981249-8D8F-42A1-87DB-0AB5C07430B2}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {18FEE64A-1E7F-4932-8158-E8AB241F3A1A}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {3732354D-3DAE-4E71-B82C-61A12C300F72}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {3061954E-EDAA-4625-837C-CE768D68927D}.204 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {78F92451-801A-40F5-9582-CB8D1CA993BE}.202 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {ADA7CF51-66B0-4A00-B37B-68D569D6FF8B}.102 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {345B0353-DFC6-48CC-A6B6-A490CA26B503}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {1330DB53-75FF-4D87-9270-6A5449A67AD7}.101 to search result
2014-07-31
19:46:18:894 216   2344
Agent * Added update {E35E5957-A5A9-4576-9D54-314A34C47C53}.201 to search result
2014-07-31
19:46:18:894 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:894 216   2344
Agent Update {DC17765A-6814-47AD-9F54-5BFBCBF95FB0}.101 is not a valid bundle. Not
2014-07-31
19:46:18:895 216   2344
Agent * Added update {CEFF8CA0-08DB-41D0-B825-FCC2CEBAF8B4}.108 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {2FECFFA0-44C8-4719-8F72-EC7BD8EDB793}.1 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {2BDE2BA3-EF93-49C6-A3C6-A806835A680F}.200 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {0B8586A5-EEB6-4DC0-BCDA-2635C7E12B55}.102 to search result
2014-07-31
19:46:18:895 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:895 216   2344
Agent Update {A6BD61A7-CC63-4068-8510-AA5268FB03E8}.101 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:895 216   2344
Agent * Added update {4C0BA6A7-A8F0-417E-B9DA-906207429CE6}.204 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {CE9876A9-83BF-4EDC-8793-4CBD6F3A6C5A}.202 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {63A011AC-FF81-44B9-811C-BECE5DC6C34B}.101 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {4A0A69AD-4237-43E7-8FB9-5A814361EC76}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {E17C01AE-BACC-4147-97AD-51A0708126D2}.102 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {CB1F1FAE-F738-49E7-AE3E-7A0C2308838B}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {9696B7B0-FF6F-4AA6-B29C-E0200CB6EB79}.200 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {B58F24B1-58A0-4661-9882-0FF509712946}.102 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {E47BE4B1-5EF0-442F-995F-C000D5AFF062}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {D68E0CB2-9501-405E-AF9C-156F352D6735}.107 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {09593FB3-C94B-4A07-84C4-2E60703AD644}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201 to search result
2014-07-31
19:46:18:895 216   2344
Agent * Added update {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {B8315ACF-BF26-4C3A-979B-80A46D06697F}.200 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {013AF7D6-EC9F-4DEF-AE41-007D211F9FBC}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {6E3C01DB-6977-46D2-A537-00F53DA0B3B3}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {9842D9DB-8AE8-4F0B-B974-66787AEC8FBC}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent Bundle contains no deployed children and thus is invalid.
2014-07-31
19:46:18:896 216   2344
Agent Update {0C1447DC-904E-4DCE-B208-50741D1CC65C}.102 is not a valid bundle. Not returning it.
2014-07-31
19:46:18:896 216   2344
Agent * Added update {DD7619DD-D6A6-4765-8406-612FD79583BA}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {ABB0AFDD-4B0A-4C3E-8341-07EA3941C465}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {B66BA1DF-4BC1-4145-859F-239C9F9BB5A0}.201 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {E2C928E1-BE92-4715-817D-FD6090F2FB07}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {C16FDFFD-A0D3-49EB-A8EB-B8F5E21D52C3}.202 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {57260DFE-227C-45E3-9FFC-2FC77A67F95A}.104 to search result
2014-07-31
19:46:18:896 216   2344
Agent * Added update {5BCDA2FE-A3F5-42C9-91F0-823230942BD8}.204 to search result
2014-07-31
19:46:18:897 216   2344
Agent * Found 151 updates and 95 categories in search; evaluated appl. rules of 1327 out of 2207 deployed entities
2014-07-31
19:46:18:918 216   2344
Agent *********
2014-07-31
19:46:18:918 216   2344
Agent ** END
** Agent: Finding updates [CallerId = MBSA]
2014-07-31
19:46:18:918 216   2344
Agent *************
2014-07-31
19:46:18:932 216   2344
Report REPORT EVENT: {A427D5D8-F546-4FBB-9F5F-931DF1F46063}
2014-07-31 19:46:18:898-0400      1
147    101    {00000000-0000-0000-0000-000000000000}
0       0
MBSA   Success
Software Synchronization   Windows Update Client successfully detected 151 updates.
2014-07-31
19:46:18:932 216   2344
Report REPORT EVENT: {C8151494-E563-4AEB-B37F-14FD7864BF5D}
2014-07-31 19:46:18:898-0400      1
156    101    {00000000-0000-0000-0000-000000000000}
0       0
MBSA   Success
Pre-Deployment Check Reporting client status.
2014-07-31
19:46:18:933 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:934 9128   2550
COMAPI >>-- RESUMED
-- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:46:18:934 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:934 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:935 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:18:936 216   2344
Report CWERReporter finishing event handling. (00000000)
2014-07-31
19:46:19:032 9128   2550
COMAPI - Updates found = 151
2014-07-31
19:46:19:033 9128   2550
COMAPI ---------
2014-07-31
19:46:19:033 9128   2550
COMAPI -- END
-- COMAPI: Search [ClientId = MBSA]
2014-07-31
19:46:19:033 9128   2550
COMAPI -------------
2014-07-31
19:46:23:918 216   2344
Report CWERReporter finishing event handling. (00000000)
bc

Installation error for security update 2013-004 version 1.0

Hi,
I receive a 'unexpected error' message when I try to install security update 2013-004 version 1.0. I have tried updating from computer and manually downloading 'security update 2013-004', but still receive the exact same error message. I'm on a macbook pro mid 2011, Mac OS X Lion 10.7.5.

Try verifying your hard disk with Disk Utility in the Utilities folder.
After launching Disk Utility, in the left pane, click on the name of your hard disk.
In the right pane, click the First Aid tab and then click the Verify Disk button.
If the result is OK, then click the button to Repair Disk Permissions.
If the Verify Disk test result reports errors, you will need to reboot the computer in Recovery HD and use Disk Utility there to repair the disk. See instructions by Kappy.
Afterwards, try installing the security update again.
As for the cause of the unexpected error, look at the log reports with Console in the Utilities folder.
HTH

After Security Update today: "Bus error" when starting "ssh" client

Hi,
I'm using OS X 10.5.2 and updated my system with the newest Safari 3.1 and Security Update a few hours ago. After I did this update, I cant use the command-line ssh client anymore. When I start the ssh, I immediately get a "Bus error" on the shell.
Any suggestions?
Thanks, Marc

Disk Utility Permission Repair doesn't do any good either.
I now actually use my Parallels VM to ssh thanks to putty but still...
This is what Crash Reporter has to say:
The application ssh quit unexpectedly.
Process: ssh [323]
Path: /usr/bin/ssh
Identifier: ssh
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: bash [189]
Date/Time: 2008-03-18 23:04:56.717 +0100
OS Version: Mac OS X 10.5.2 (9C31)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000001014
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x0004c4e7 0 + 312551
1 ??? 0x0004c56e 0 + 312686
2 ??? 0x0004c7f7 0 + 313335
3 ??? 0x0004b070 0 + 307312
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00001000 ebx: 0x0004c7d5 ecx: 0x0004e338 edx: 0x0004e340
edi: 0x0000101c esi: 0x00000000 ebp: 0xbffffa18 esp: 0xbffff9f0
ss: 0x0000001f efl: 0x00010286 eip: 0x0004c4e7 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00001014
Binary Images:
0x363d8000 - 0x36415fef +ssh ??? (???) <38f6d3ec24f0b372e64c12b15bb319d4> /usr/bin/ssh
0x8fe00000 - 0x8fe2da53 dyld 96.2 (???) <7af47d3b00b2268947563c7fa8c59a07> /usr/lib/dyld
0x90125000 - 0x90129fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x90841000 - 0x909a0ff3 libSystem.B.dylib ??? (???) <4899376234e55593b22fc370935f8cdf> /usr/lib/libSystem.B.dylib
0x9316d000 - 0x9317bffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x9317c000 - 0x931a7fe7 libauto.dylib ??? (???) <42d8422dc23a18071869fdf7b5d8fab5> /usr/lib/libauto.dylib
0x931a9000 - 0x93206ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x936a2000 - 0x937d4fef com.apple.CoreFoundation 6.5.1 (476.10) <d5bed2688a5eea11a6dc3a3c5c17030e> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x93adf000 - 0x93b91ffb libcrypto.0.9.7.dylib ??? (???) <330b0e48e67faffc8c22dfc069ca7a47> /usr/lib/libcrypto.0.9.7.dylib
0x93be1000 - 0x93cc0fff libobjc.A.dylib ??? (???) <a53206274b6c2d42691f677863f379ae> /usr/lib/libobjc.A.dylib
0x93d20000 - 0x93e58ff7 libicucore.A.dylib ??? (???) <afcea652ff2ec36885b2c81c57d06d4c> /usr/lib/libicucore.A.dylib
0x93fbc000 - 0x93fdafff libresolv.9.dylib ??? (???) <0629b6dcd71f4aac6a891cbe26253e85> /usr/lib/libresolv.9.dylib
0x94c9c000 - 0x94d4cfff edu.mit.Kerberos 6.0.12 (6.0.12) <3dd13466876a8fe4549cfc1354233ec3> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x94d4d000 - 0x94d54ffe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib
0x95ca0000 - 0x95e6bff7 com.apple.security 5.0.2 (33001) <0788969ffe7961153219be10786da436> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x966d7000 - 0x966defe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib

Transform path error when uninstalling 8.1.2 after applying security update

I have been testing a customized install of 8.1.2 and noticed that when you try to remove 8.1.2 after applying the latest security update, an error pops. "Error applying transforms. Verify that the specified transform paths are valid". Looking in the registry you can see an odd entry in the "TRANSFORMS" string value entry under HKEY_CLASSES_ROOT\INSTALLER\PRODUCTS\68AB67CA7DA73301B7448A2100000030\. The value is changed to "@AcroRead.mst;C:\Program Files\Adobe\Reader 8.0\Setup Files\{AC76BA86-7AD7-1033-7B44-A81200000003}\RdrSU.mst" after applying the security update. You can edit the path to remove everything after @AcroRead.mst and then the software can be uninstalled. This problem does not happen if the install is not customized using a transform. I would like to deploy this software with the security update but do not want problems removing the software in the future. Please advise...

I don't have a solution but found the exact same problem when I was testing security update 1 for a customised 8.1.2 deployment.
I have decided NOT to deploy the update until it is fixed (or released as an MSP file so I can patch the MSI)
I tried to contact Adobe support (UK) but they were not interested as we don't have a support contract :-(

Mail 2.1.3 Port Connection error after security update.

I have 6 active email accounts that are normally checked by Apple Mail. After installing the most recent security update yesterday, 4 of the 6 accounts stopped connecting to their respective ports. Two of them are POP accounts (both gmail accounts on port 995), two are IMAP (ports 993 and 143), all four use SSL in the advanced settings. Of the two accounts that still work, one is an IMAP account (port 143), the other is a POP account (port 110), both without SSL. Firewall is on.
I get the error:
"There may be a problem with the mail server or network. Check the settings for account "account name" or try again.
The server error encountered was: The connection to the server "correct server" on port 995 timed out."
The error is the same for all four accounts, with their respective ports.
I have checked my server settings and verified that they are all correct. I can login to webmail for all of these accounts and read my mail without problems.
Mail Connection Doctor says:
"Could not connect to this POP server. Check your network connection and that you entered the correct information in the Accounts preferences. Also verify that the server supports SSL. If it does not, uncheck the "Use SSL" checkbox in the advanced tab of Account preferences."
All four accounts require use of SSL.
I have tested their connections on two different wireless modems and an ethernet connection to the same network as one of the wireless setups. No change.
I have tried turning off my firewall. No change.
I tried setting up one of my gmail accounts as an IMAP account instead of POP. This did not work either.
I have tried adding a Firewall Port connection for ports 995, 993, and 143 as both TCP and UDP numbers (independently and together). No change.
I have tried following these instructions from Mulder in response to another user's topic:
"1. Quit Mail if it's running.
2. Go to Home/Library/Caches/Mail and delete all the sub-folders within that one.
3. Go to Home/Library/Mail and delete this file:
• LSMap2
4. Restart Mail and see if it works."
No change.
Any other suggestions?
Message was edited by: groovysuvi

I did get some suggestions from this
http://discussions.apple.com/thread.jspa?threadID=1766017
thread, but still no email from those four accounts. Does anybody else have any suggestions?
I really do not want to have to resort to webmail and/or my iphone for my email needs.

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error OL-290. Any fixes?

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error: Quicken could not connect to the server. Please try again later. [OL-290] I understand this is because of a mismatch between SSL certificates at the financial institutions and Apple's SSL certificate included with OS 10.10 Yosemite. Any fixes to this issue?

I have the same problem but Q for Mac 2015 does not meet my needs. Is there a fix for this problem?

Error after Security Update 2007-001

Salut,
After doing the latest airport security update my Macbook doesn't boot anymore (freezes before the login screen):
- "fsck -fy" doesn't fix it
- booting installation DVD + "repair permissions" doesn't fix it
After some seconds I can see launchd in a infinite loop of error msgs blinking frenetically.
Great security update that crashes a system, long live QA.
thanks,
Daniel
Macbook Mac OS X (10.4.8)

Did you try booting in safe mode (Shift while booting MacOS X ?
If this works, try re-applying Mac OS 10.4.8 combo update for your machine and re-install security updaye.
Oh yep, forgot to say: safe mode hangs too.
If not, it could be a little tricky : boot in single user mode, find a way to copy Mac OS X Combo update and apply in in text mode :-/
Ok, I'm downloading the combo (250mb) hopefully I would be able to mount a pendrive and launch from the cmd line. Btw how ? using "open" ?
Oh, btw, what are those messages ?
I'm working on it (I'm trying to boot in verbose mode)
Et merci for your quick reply
Daniel
Macbook Mac OS X (10.4.8)

Windows 7 sysprep errors after security updates to be IA compliant

After installing security updates to remain IA compliant I am unable to run sysprep on my Windows 7 VM's and our hardware images.
It is NOT rearm.
Log:
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\igfxsrvc.exe!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\igfxtray.exe!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\DRIVERS\Accelern.sys!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x3 setting SDDL on driver file C:\Program Files\STMicroelectronics\AccelerometerP11\stdcfltn\stdcfltn.cab!
2013-06-20 11:51:04, Error                        [sysprep.exe] UnattendFindAnswerFile: Explicitly provided unattend file [C:\windows\system32\sysprep\unattend.xml]
does not exist.
2014-03-27 13:48:30, Error                 SYSPRP WindowsSideShow: Failed to get task folder (0x80070003)
2014-03-27 13:48:30, Error      [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\System32\AuxiliaryDisplayClassInstaller.dll,WindowsSideShow_Sysprep_Generalize', returned error code 31
2014-03-27 13:48:30, Error      [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 31
2014-03-27 13:48:30, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize internal providers; hr = 0x8007001f
2014-03-27 13:55:57, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2014-03-27 13:55:57, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
2014-03-27 15:16:24, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2014-03-27 15:16:24, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f

It is not that. Based on other posts I have found that if I delete this key HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize, value {b3257dc1-2617-6667-6a6f-2fe2739a2b89} sysprep works fine. Does anyone know the risks
of deleting this key?

Security update error

Similar Messages

Maybe you are looking for