Security upgrade with Enhancement pack 4 on ECC6

Hi Everyone,
Perhaps you already know SAP is prompoting upgrade via Enahncement packs
so we have upgraded ECC6 with Enhancement packs 4 and now that we have doen this , if you want to create a role in PFCG this prompts tp peform steps 2A to 2C in SU25
my question is
1.Did any one upgrade to EPH4 on ECC6
2.If you did , did you perform the steps ( 2A to 2C in SU25)
3.And also if you perform 2A and 2B , does this already write entires in PFCG ?
Any thoughts ?
Regards
Mark

Hi Mark,
> 1.Did any one upgrade to EPH4 on ECC6
-->not me
> 2.If you did , did you perform the steps ( 2A to 2C in SU25)
--> 2A-C shall be executed after any SP implementation to get the changes from SAP into your tables/roles....
> 3.And also if you perform 2A and 2B , does this already write entires in PFCG ?
-->no
only 2C, but after you have run 2A,2B, youll get your authorizations updated in your roles the next time you use the merge-authroizations function in PFCG
b.rgds,
Bernhard

Similar Messages

Security Guide for Enhancement Pack 4 for ECC 6.0

Hello,
I am trying to analyse the impact of applying Enhancement pack 4 for ECC 6.0, Can someone help me find any security guides for it.
It is an existing system and few additional modules are being implemented.
Kind Regards.

Hello,
We have applied EHP4 on an exisiting(running) ECC 6.0 System. Can someone help me find answers to below queries
a) What is the SAP standard process to start with Security bit.
b) Do we need to run SU25 steps. If yes, which one of them.
c) Since the purpose of applying EHP4 was to activate few set of new business functionalities, we intend to affect the existing security design at the minimal. What is the best approach for this.
Kind Regards,
Abdul

GUIxt with Enhancement Pack 5

We are in ECC 6 and are in the process of updating to enhancement pack 5. We are having to make changes to the guixt scripts due to changes in screen names, etc. One issue I am having is with TIP. It does not seem to work properly. It is a customer screen and the script is getting activated, but the tip icon does not appear and it overwrites the field description with the tip information. Anyone have any idea.
The syntax for the tip is
Tip F[%#AUTOTEXT002] "Format: Employee # + dash + password i.e 9999-ABCDE"
the field name is correct and the 'format employee #... shows up, just not as a tip.
Any help is welcome.

Hi,
Don't know if this issue is resolved but in case it is not:
Tip [Name of your element] "Format: Employee # + dash + password i.e 9999-ABCDE"
Good luck

7.3.2 Upgraded with new security upgrade with bad result

Upgraded and now have a dim terminal screen. How do I get a fully lit screen?
Message was edited by: ricardojh

What do you mean by a "dim terminal screen"?
In the meantime, do the following if your computer is otherwise operational:
Disconnect all peripheral cables (if any) except from your keyboard and mouse
Repair permissions via Applications/Disk Utility
RESTART the computer ..... Repair Permissions again
Reconnect the cables
Let us know how that works out.
DIXIE

Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade

We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5. I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed. Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile. This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse. We see there is a high use of java script, and the processors canu2019t handle this. When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues. When we login to tcode LM00, with the RF scanners, the system is very slow. It might take 30 seconds to confirm one item on a WM Transfer Order.
1.) Can we revert back to Web SAP Console, after we have upgraded to EHP5?
2.) What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies. One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.

Tom,
I am sorry I did not see this earlier.
I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
Let me know if I can answer more questions related to this topic.
Cheers,
Shari

GTS 8.0 with ECC Enhancment Pack 4 SP2

Hello-
We've recently upgraded our ECC system to Enhancement Pack 4, SP2. We'd like to install GTS 8.0, however I'm unable to find the requirements for GTS 8.0 in enhancement pack terms. I'm only able to find that it requires SPS16, which I'm not able to find any comparisions relating SPS16 to Ehp4 SP2 to see how they stack up.
Basically, can anybody find or refer me to material for GTS requirements in terms after Enhancement Pack 4? Or a note that compares SPS to EhP versions?
Thanks in advance!!
Jeff

Hi Jeff,
SAP note 1266777 provides the information on installation of GTS on ECC with Enhancement Pack.
Best regards,
Howard

Purchase requisition document type change after Enhancement pack 4

HI,
we have recently upgraded to enhancement pack 4, after which i am not able to change purchase requisition document type.
In change mode ME52N, the system is allowing to make change but when i goback and display the same PR again the change is not visible in change history also.
I am able to make other changes. facing the problem with change in document type only.
Regards,
Raghu

Hi,
One thing please note that once you select the document type and draft the PR and save the PR, you will get the doc number.
Once you get the document number you cannot change the PR document type .
The reason is document type is linked with number range so it cannot be changed because different seriers of document number is assined to differentdocument type.
And moreover document type is linked with the screen settings also. So I would request you to check the settings for each doc. type

Enhancement Pack

Hi,
Currently we are on release 700 with
SAP_ABA - SAPKA70020,
SAP_BASIS - SAPKB70020
PI_BASIS - 2006_1_700
SAP_BW - SAPKW70022.
We would like to upgrade to Enhancement pack 4 on only BI systems and
not other ERP systems, we would like to know what the chanllenges are
and is it possible for only BI system being on EHP4 and not other
systems?
Thanks,
Arvind

Hi,
As such there will be no issue if BI will be on EHP1 and ECC will not be on enhancement package. But as per my experience, you should have both system on Enhancement Package i.e. BI on EHP1 and ERP on EHP4 level.
Thanks
Sunny

How to see enhancment pack level.

Dear All ,
what is enhancment pack?To install new enhancment pack TX-SAINT will be used?How to see curent enhancement pack level?
Regards
Ashok

Dear All,
Its requirment in my company to to upgrade the enhancment pack.I work on patch but i m confused regarding enhancment pack.
Is both are same?Right now my basis patch level is SAPKB70015 Basis Support package 15 for 7.00 .Same with cross aplication componenet SAPKA70015 ABA SUPPORT PACKAGE FOR 15 FOR 7.00.
So i have to increse the patch level.
which TC we use for enhancement pack?
Regards
Ashok

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

Need help on assessment of security upgrade to ECC .0

Hi,
I am a security guy and am involving in security upgrade from 4.6c to ECC6.0. I want your suggestions & contribution on preparing the assement of security upgrade. So can anybody guide me to follow the security strategies <removed_by_moderator>
I appreciate your kind help.
<removed_by_moderator>
Regards,
Venkat.
Edited by: Julius Bussche on Mar 12, 2008 8:31 AM

Best start will be transaction SU25 and its documentation in saphelp.com
And no, I will not e-mail you anything, this is a forum, where we share knowledge so the other visitors can benefit as well.

Enhancement Pack - Wayaround

Hey everyone,
I've got an interesting problem at my hand that I can't seem to find a reasonable answer to. The issue is as follows:
We are in the process of activating BI content ( our ERP has enhancement pack 1 ) and there are a couple of core datasources missing ( for master data ) which come with enhancement pack 2 and over. And we can't initiate an activity of updating to EP2 as that would delay our current project - however, we are currently testing a proposed solution i.e. trying to transport datasources from a demo-server ( already on EP2 ) ....
so, what do you guys think can be done for a short-term solution ..... would like any input / suggestions from your side.

Hi
This sounds good you can implement however, before proceeding check with basis that, future if they planning to implement EP2 what will be the impact whether overwrite or give any error as "Already Exists".
Regards
YuvaraajP

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

ECC 6.0 Enhancement Pack 5 upgrade phase ADJUSTCHK faillure

When I run the Enhancement Pack Installation, I get a hard failure at the MAIN_SHDCRE/ADJUSTCHK phase. The error message says "No lines found in logfile matching "UMODPRO\.INX". The log follows...
1 ETQ201 Entering upgrade-phase "ADJUSTCHK" ("20111006131443")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_SHDCRE/ADJUSTCHK'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'SAP_MOD_EHP'
2 ETQ399 Arg[1] = 'ADJUSTCK.ELG'
2 ETQ399 Arg[2] = 'ADJUSTMT.INF'
4 ETQ010 Date & Time: 20111006131443
4 ETQ265 Starting report "RSUMOD01" with variant "SAP_MOD_EHP" in batch
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSUMOD01" with job count "13144400" scheduled
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20111006131819
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ248 Missing log file(s) of report "RSUMOD01", matching "UMODPROT\.INX"
What does this mean?
Is the backslash supposed to be in the name UMODPROT.INX?

Hi,
Please check in SM37 if there is any job failure in the system. And also check if there is any dump.
Thanks
Sunny

SRM 7. 0 with ECC 6.0 Enhancement Pack

1) My client just upgraded their R/3 to ECC 6.0, but no Enhancement Pack.
2) They are trying to upgrade from SRM 5.0 to SRM 7.0 in the near futures.
3) During their first SRM phase, their scenario is limited to the following:
a. R/3 RFQs are pushed to SRM via RFC call (custom program)
b. SRM vendor logs in to see the RFQs and creates Quote
c. SRM buyer evaluates the quotes
4) Question: In order to run the above mentioned scenario without issues, is Enhancement Pack 4 a mandatory component for them, or can ECC 6.0 without any EnH support it already? If it's mandatory, which sub-components of the EnH 4 must be activated in order to support the scenario?
5) Question: In their next SRM phase, they are trying to run scenarios like PPS and Doc Builder. In that case, is Enhancement Pack 4 a mandatory component?
6) Last: Is there any SAP official documentation that maybe answers the question that I listed above?
Thanks.

Hello Jay,
Please find the upgrade information:
https://websmp206.sap-ag.de/upgrade-srm
EhP4 is not mandatory for strategic sourcing, data transfer via RFC can be used.
The benefit with EhP4 for your scenario will be new feature of "Collective Processing of purchase requistion" CPPR; where buyer can select the PReq line items on the portal & create RFx directly in the SRM system. All data transfer is via PI in this scenario. Creating a RFQ in ECC is not a good idea, when you can leverage the RFx capabilities of SRM.
New features: Blog:
/people/michael.jud/blog/2008/09/10/srm-70-in-the-business-suite
Official information :
http://service.sap.com/srm click on SRM 7.0 external view
Hope this solves.
Thanks
Ashutosh

Security upgrade with Enhancement pack 4 on ECC6

Similar Messages

Maybe you are looking for