Security with Windows on an iMac OS X10.4

If I load Windows XP on my iMac, am I going to run into the same horrific security issues I had with Windows? The reason I went to a Mac was to get rid of all the viruses, etc. Also, do I need a special version of XP for the Mac or just load the software that came with my old PC?

Hi Pualani and welcome to Discussions,
first, questions like these belong in the BootCamp Forum, not here, where compatibility problems are discussed.
To your questions, a Mac running Windows is, simply said, like any other PC running Windows.
Same vulnerability, same security issues, same precautions needed (AV-software, Trojans, etc.).
To get away from them, I don't use any sort of Internet while running Windows.
If the Windows veriosn you have is a XP with SP2 and this windows is not 'bundled'/'dongled' to the PC you bought it with, then you can use it.
Otherwise you have to buy a new windows license.
Regards
Stefan

Similar Messages

Need HELP with Windows on my iMac. Thanks.

I'm an experienced Windows user. I bought the iMac 20" Duo Core 2 (2.16ghz) because of the hardware and the design. I want to use Windows XP Pro (then Vista) almost exclusively.
PROBLEM: Windows installed and worked PERFECTLY (without the Mac OS or Boot Camp. I also installed the Mac drivers for Windows. Everything went beautifully UNTIL I started installing the Windows drivers for my external firewire sound equipment. Then the computer wouldn't fully boot. Every manufacturer I spoke with concerning my external equipment said that they did NOT plan to update their drivers to use Windows on a Mac. They said that there are problems and issues with the new Duo Core 2 processor in a Mac running Windows. These are DRIVER issues that may never be addressed by individual equipment manufacturers.
QUESTION: Do I need to reinstall the Mac OS and keep it updated in order to avoid conflicts with Windows' use of the Mac hardware? Or can I simply install Windows only, and try for workarounds?
Thank you very much for your replies.

Thank you, Eric, for your VERY helpful reply.
I've reinstalled Windows XP Pro S2, and got the system up and running again.
The problem I initially had was with the M-Audio Firewire Solo external soundcard. Once the driver was installed, the computer locked during booting. The M-Audio tech I spoke with was exceptionally knowledgeable, and he said they were working on updated drivers for both the Mac and the PC, but not for Windows on a Mac.
The problem could be that the firewire port uses the same IRQ as the hard drive. Although there isn't technically a conflict, the firewire port could be interfering with the boot when it's connected to a phantom-powered unit. And this unit cannot be hot-wired. However, the computer locked simply upon installing the driver with no unit connected.
I've decided to change over to a external soundcard that uses USB instead. I'm hoping this will solve the problem.
I purchased this computer for digital audio recording in Windows. If there are more conflicts that I cannot workaround, I'm going to have to return it and get a PC-based Intel desktop system. I don't want to do that however. I really, REALLY like this machine. But I need it to work with my equipment.
BTW, I've searched the other forums here on Apple.com. Several people have written in about the problems they've had with both the firewire and USB ports - using the MAC OS. So it's not just a conflict with Windows.
I really appreciate your reply. Thanks again.

IPod works with Windows but not iMac

I have an 80GB iPod Classic that works perfect on my computer running Windows Vista and iTunes 7. I have only ever used it with iTunes.
My iPod's format is FAT32 (Windows). And it's running software Version 1.1.2 and disk use is enabled.
When i try and plug it into an iMac (iMac G5) running OS X 10.3.9 it doesn't work. It doesn't come up as an external drive so I can't access it as an external disk and it fails to work in iTunes.
I have upgraded the Mac to the latest version of iTunes but this still doesn't solve the problem. I tunes gives me the following error "iTunes has detected an iPod that appears to be corrupted...". This is not the case, my iPod is not corrupted.
How can i get my iPod to work on the Mac?

I had the same problem. Your ipod is formated i believe for windows so it wont come up on your mac. to format it you need to plug it into the mac go onto itunes and if you click on the summary page of ipod the only options you will be able to edit on the ipod from the mac are restore or (i dont know exactly) but there should be a button explaining that you need to restore your ipod and format it for mac.
to do this you need to click the button on the summary page on itunes (if you click on your 80G ipod on the left side) but formating for mac deletes everything off the ipod. it wont be able to transfer music etc if you format for mac on your windows but it will now work on the mac.
i hope u understood because i didnt really make it very clear. but if you dont understand just ask and ill be happy to explain it for you.
Alex
Message was edited by: Alexander Richardson

Why does home-sharing not work with Windows-PC and iMac?

Aber mit gleichem Windows-PC und MacBookPro doch? Alles im selben Neztwerk. Der PC erscheint beim iMac einfach nicht unter Freigaben. Der iMac erscheint zwar beim PC unter Freigaben, aber wenn man auf die Mediathek des iMac in der PC-Anzeige klickt, erscheint der bunte Drehball und nach einer Weile ist die Anzeige des iMac in der Rubrik Freigabe beim PC nicht mehr da. Erst nach Neustart des PC erscheint der iMac dort wieder. So nutzt mir das gar nichts. Die Einkäufe werden automatisch auf allen drei Geräten aktualisiert.
Sämtliche "Hilfen" habe ich durchsucht, aber ohne Erfolg. Es klappt einfach nicht mit der Freigabe.
Vielleicht ist es ja möglich, eine deutsche Antwort zu bekommen.
Ich kann mir auch gut vorstellen, dass ein solches Forum in Deutschland gut genutzt würde. Es ist sehr schade, dass es das nicht gibt. Aber vielleicht kommt soetwas ja irgenwann einmal. Jetzt wo auch in Deutschland an jeder Ecke Apple-Produkte zu kaufen sind und keine Exoten mehr darstellen.
Vielen Dank im voraus.

First, each Library should have a unique name, not the same name.
Now, I wrote an extensive how-to in another thread that explains Home Sharing, Library Sharing, how to turn them on and identify them and so on. See if it helps you with your problem.
https://discussions.apple.com/thread/3461734

Strange problem after installation of bootcamp with windows 7 on Imac i5 27

After installed Windows 7 (Single partitions Leopard Snow and Windows works very fine) i have a bootloader problem with the option key at startup of the machine.
If i hold option for a little time i don't see any icon, only a gray display. Only if I hold down the option key for about two minutes icons appears correctly.
The problem not exist if i install rEFi, bootloader, it start very fast and all work fine. Any ideas?

Hi,
This is Oracle Database Express Edition (XE) forum.
If you like use APEX listener and have problem with that here is link to correct forum.
ORDS, SODA & JSON in the Database
If you like use EPG see configuration steps from APEX install instructions
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#CBHBCBBJ
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Sharing hard drive with windows xp on imac intel duo core

Hi,
I was wondering whether I could give over anymore of the hard disk on my imac intel duo core to Windows xp? If so, how would I go about doing that?
Thanks in advance

At this point I think that you would need to use Boot Camp to remove the current partition and then make a bigger one and reinstall Windows.
Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

Why is there no sound with Windows 8 on iMac?

Using boot camp, I loaded Windows 8 and there isno sound when running windows. Can anyone solve this problem?

You haven't installed the Apple drivers for Windows.
Download BootCamp Drivers for Macs to run Windows 7 or 8 | Chris F Carroll

Driver issue with Windows 8.1 on new iMac 2013

Just got a brand new iMac and am attempting to install Windows 8.1 on it. The Boot Camp Assistant kept timing out on the support software download so I downloaded Boot Camp 5.0.5033 from Apple support and put that on my external FAT drive.
I was able to get Windows installed, but when I attempted to run setup.exe off of my external drive, I got a "Boot Camp x64 is unsupported on this computer model" error. I was able to work around this by running bootcamp.msi from a DOS prompt in administrator mode at which point the install seemed to go through successfully.
Despite that, I'm still getting no love on WiFI, bluetooth, audio, etc. I'm attempting to download again through Boot Camp Assistant on the hope that there's a later version for my machine that's not yet available for direct download but am not optimistic.
Any thoughts/ideas would be great appreciated. Note that I am running the latest everything on the Mac side (recent 10.8.5 Combo).
Thanks in advance.

Actually, that link is exactly what got me in trouble. Use Boot Camp Assistant to get the drivers.
As of this writing, Boot Camp 5.0.5033 will not adequately set up your drivers on a new iMac with Windows 8.1.
The only way I was able to get the WiFi working was to use the drivers automatically downloaded by Boot Camp Assistant. Presmably this is a newer version than 5.0.5033 but I haven't been able to find it anywhere else for download.
I should also note that I was having some DirectX issues running graphics intensive software even after updating through Boot Camp Assistant. These were resolved by downloading the latest driver for my video card (GeForce 780M). There might be other issues that will require a manual driver update but I've yet to run into any more.
Best of luck.

How do Dual Monitor with my Mac Book Pro (Boot camped with Windows 8) through my mini display port VIA Thunderbolt to a iMac (Model Mid 2011)?

So I have a Mac Book Pro with a bootcamp Windows 8. I dual monitor on the Mac side with my Mid 2011 iMac through my mini display port via thunder bolt cable. In my perfect world, I would be able to switch to the Windows side and have the iMac mirror or extend my windows display for my gaming pleasure, etc. I'm not sure if it's just a simple driver or that it cannot be done. Please help. Thanks.

so you want the notebook forum, not this one
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

How can i install a windows version 8 on a 3 year old iMac 27 (only windows and nothing else not via bootcamp = result shut be a clean iMac with windows - no

When i now had recieve a brand new 27" imac, i had a 3 year old model 27" imac which my daugter want to have BUT i should be as a clean Windows thing -
so how to change the computer to a clean windows 8 computer with no apple programs in and no Maverick or other lovely programs?
I had seen on the net that a lot of peoble had windows with bootcamp - i am not a computer tecnician and when i try - i end op with a machine with could nothing - no mac programs - no office pack - no adobe programs - so i had to start op again with a new harddisk.
Some of the problem is that i dont understand the thing which bin told when you go to bootcamp for a user of mac's since the model was the "classic" and we make newspapers on them - so i want and easy way to have and mac computer for my self (the new one) and let my daugter have a beutiful imac with windows on.
dont begin talking about parrelles i had try that, results it had a windows 7 which cant be updated, apple dont support that and microsoft doesnt so - help me
regards
Chevron B50

If you don't want Boot Camp and you don't want a virtual machine, go buy a Windows computer.
Both Boot Camped Windows and Windows running in a virtual machine work well. Your issues are because of your lack of knowledge or understanding, not because Boot Camp and virtual machines are poor products. Universities, large and small businesses, home users, etc. use virtual machines to run their operating systems.
Your statements about Boot Camp and Parallels are not the experience of thousands of users.
Either find someone who is knowledgeable about running Windows on Apple computers to help you or buy a Windows computer. Believe me, if you find a way to install only Windows on your Apple computer without using Boot Camp or a virtual machine you will have more problems than what you have already experienced.

After errors with disk partition, I removed Windows from my iMac. Now when I start my computer it goes into a black screen and not straight into the Mac area like it used to, unless I hold Alt straight away to give me the option. Any help?

Hi,
Sorry, I'm new to the community, so apologies if I'm repeating myself.
OK, so I tried to install Windows Vista onto my iMac with the disk partition. Everything was going fine and it wasn't until last minute, when it was installed that an error came up saying that this can only be done with Windows 7. After this error, I couldn't access any errors of my iMac and when I shut down and restarted my computer, it automatically logged into Windows.
So after a panic, I rang Apple Care and the lady helped me log into my apple area, delete Windows from my iMac, and all was restored.
However, now when I shut down my computer and boot it back up, I think my iMac is trying to log into Windows areas that no longer exist. It loads up a black screen and doesn't move from there. To log into my Apple area, I have to do the whole process of holding Alt immediately after I switch the power on and access the Mac drive and log in that way.
It's beginning to become a real pain and I'm paranoid this process is going to damage my computer. Any advice on how to restore logging-in back to it's former glory when I first purchased it?
Thanks

Solved it. Thank you very much for that!

When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

Welcome to Apple Support Communities
Boot Camp Support Software 5.0.5033 supports Windows 8.1 and can be used with that version. The Mid 2011 iMac is compatible with Windows 8, so you should not have any problem by installing Windows 8.
Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Will Pagemaker 7 work with Windows 7 (on an iMac)?

I'm writing for my dad, 86, who has designed several books in Page Maker 7 on a PC running Windows XP. For his 5th book, he wants to switch to the iMac.
So he got an iMac with the Adobe Creative Suite 3 with InDesign. Unfortunately, despite classes and tutorials, he cannot master inDesign. It's just too difficult. Why does Adobe (and Microsoft Office and all the developers) feel the need to keep making the programs more difficult, but then flat out lie by saying they're actually easier?
So he's still using the pc with Page Maker and going back and forth from mac to pc for this photo or that font, and it's annoying and complicated.
How about this for a solution: What if I were to install Parallels and put Windows 7 on the iMac, and run Page Maker 7 there.
Here are my questions:
Is the Page Maker 7 on his pc (which was installed several years ago) the same Page Maker 7 Adobe is offering here now?
Of course he can't FIND his original Page Maker 7 disks, so we have to purchase new ones.
Is he eligible for an upgrade price from Adobe, since he owns the earlier Page Maker and a full version of CS3?
Will the current Page Maker 7, available on the Adobe website, be compatible with Windows 7?
What other pitfalls am I likely to encounter by trying to do this?
Thanks for any assistance you can offer,
Monica

Monica Marquez wrote:...
Here are my questions:
Is the Page Maker 7 on his pc (which was installed several years ago) the same Page Maker 7 Adobe is offering here now?
Of course he can't FIND his original Page Maker 7 disks, so we have to purchase new ones.
Is he eligible for an upgrade price from Adobe, since he owns the earlier Page Maker and a full version of CS3?
Will the current Page Maker 7, available on the Adobe website, be compatible with Windows 7?
What other pitfalls am I likely to encounter by trying to do this?
Thanks for any assistance you can offer,
Monica
Hello Monica. My replies in order:
Yes.
Of course.
Almost completely sure that he is, if he has his complete serial number.
In theory, most definitely no. In practice, there are reports of successful instalations, almost always with some (or many) shortcomings.
Almost anything.

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder.

Flash CS4 not working with Windows 7 64bit and Kaspersky Internet Security

I have a new i5 core computer running Windows 7 64bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 becomes so unresponsive that it is completely unusable. Uninstall KIS and it works absolutely fine. I've already read on another forum that someone else is experiencing the same issue with the same combination of products. Is anyone else having this problem amd if so how did you solve it? I've posted on the Kaspersky forum with no solution thus far.
Does Norton work OK with Windows 7(64) and CS4?

*** PROBLEM SOLVED ***
Taxxem you are a star. Ideed turning off 'disable external service control' and disabling 'self defense' under 'settings -options' does indeed bring Flash back to life. Disabling self-defense had the most impact (and causes Kaspersky to grumble somewhat) but disabling external service control also had an impact, albeit much smaller. I'll post this solution against my Kaspersky forum post and hopefully they will do something about it.

Security with Windows on an iMac OS X10.4

Similar Messages

Maybe you are looking for