Securityupdate 2013-004 won't install?!
I tried a couple of times to install the security update, but after reboot i always got: 'there's been a problem and no update installed ... please restart'.
Then i read the Java update could cause the problem, so i manually installed 'Java 17 for Mac OS X 10.6', but still, same thing!
I don't know if i'm in trouble now if i try to install Maverick?
Ideas?
Thanks for your help, Alex.
Hi,
The message “25004” could indicate problems with the trial product key, I think MicroSoft thinks it's been used on this machine, so lets go back and start over again.
Please try to do following steps:
• Get a new trial product key, may need to create a dummy email id to get it.
• Uninstall current trial, use FIX IT from KB290301 and confirm with manual process confirmation msl
• reboot into safe mode (with networking)
• clean TEMP folder
• install new trial (in safe mode) (I don’t know how they did this since in Vista I get message Installer service cannot be starter
For more detail information, please refer to the following link:
http://support.microsoft.com/kb/290301
http://support.microsoft.com/kb/2559816
http://support.microsoft.com/kb/2739501
Regards,
George.zhao
Similar Messages
-
Visio 2013 Trial Won't Install
I was able to burn the software to a disk with no problems. When I attempt to install, I get an error message "Error 25004. The product key you entered cannot be used on this machine. This is most likely due to previous Office 2013 trials being installed.
System error: -1073422314." The install process never asked me to enter a product key. I am running 32bit and downloaded the 32 bit version. I am also running Office 2010, except Outlook is the 2007 version. Thanks for any suggestions.Hi,
The message “25004” could indicate problems with the trial product key, I think MicroSoft thinks it's been used on this machine, so lets go back and start over again.
Please try to do following steps:
• Get a new trial product key, may need to create a dummy email id to get it.
• Uninstall current trial, use FIX IT from KB290301 and confirm with manual process confirmation msl
• reboot into safe mode (with networking)
• clean TEMP folder
• install new trial (in safe mode) (I don’t know how they did this since in Vista I get message Installer service cannot be starter
For more detail information, please refer to the following link:
http://support.microsoft.com/kb/290301
http://support.microsoft.com/kb/2559816
http://support.microsoft.com/kb/2739501
Regards,
George.zhao -
Security update 2013-04 won't install
I am running snow leopard on imac 10.6.8. This update has been showing for months now but I get a message 'failed to install'. Over past few months safari is getting slower and more glitchy - could the lack of update be causing this? How do I fix the installation problem? (FYI, please respond in non-technical terms... I am computer litterate but not a pro!)
This page describes what is in the update.
http://support.apple.com/kb/HT5880
This page gives advice on what to check if software updates fail to install.
http://support.apple.com/kb/ts1394
Hope they help. -
I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?
Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra -
Flash Player won’t install after downloading
On the first attempt to install v14, Flash Player v13 was installed and working fine.
I opened the installation package for the new Flash Player, followed standard protocol for installing Mac software and it hung before retrieving anything.
Subsequently, while watching the beach ball spin, I got an error message that the installer could not retrieve the v13 Flash Player software.
So I uninstalled Flash Player 13 and again attempted to install v14, only to see the spinning beach ball followed by a message that the installer could not retrieve the v14 Flash Player software.
I am running OS X v10.9.4 on an early 2013 MBP/Retina display with 3GHz Intel Core i7 processor and 8GB DDR3 1600 MHz Ram.
If you have any ideas or suggestions regarding my issue, please let me know.
Sincerely.
JWHTry un-installing and then re-installing via the web site.
Adobe Flash Uninstaller
Adobe Flash Player -
Problems on install Java 2013-004 update on Lion 10.7.5
I'm trying to install the Java 2013-004 update on a 2008 Macbook with Lion 10.7.5.
I've tried several times from 'Software Update' and downloading the .DMG from Apple.
It always stops at the very end of 'Installing items', lasting less than one minutes. But it can stay in that situation for hours and never completes the installation. And since them I'm having problems with software like 'jdownloader' that uses Java.
Any suggestion?
Thanks in advance.Hello megapauer,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Java updates available for OS X on August 28, 2013
http://support.apple.com/kb/HT5648
For a new installation of Java 7:
Download the latest Java 7 version from www.java.com/download/mac_download.jsp.
Open the downloaded disk image.
Open the installer within and follow the onscreen instructions.
Best of luck,
Mario -
After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected
After installing "Java for OS X 2013-004" update, Java apps don't work anymore as expected.
Windows of Swing apps don't display all GUI elements.
After replacing System/Library/Java from a Time MAchine Backup, everything works normal again.
Is this update corrupted?"avoid using Java in a web browser at all,..."
Good advice.
"...old Java apps/applets that aren't written to modern specs ..."
The stand-alone Java Swing applications, that don't display their GUI elements after installing this update, have been written according to modern standards. With Oracle Java7, and with Java6 from Apple prior to this update, they run absolutely flawlessly.
This is absolutely Apple's fault. -
Data Analysis Plus won't install. OS 8.1 with MS Office Professional Plus 2013
Hi. I am trying to install Data Analysis Plus and it won't install. An error occurs stating that:
The value of the property 'type' cannpt be parsed. The error is: Could not load file or assembly 'Microsoft.Office.BusinessApplications.Fba, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find
the file specified. (c:\Program Files (x86)\Common Files\Microsoft Shared\VSTO\10.0\VSTOInstaller.exe.Config line 10)
I have never had any other OS or MS Office version installed on this computer. I am running OS 8.1 and MS Office Professional 2013. I have tried to use the alternative version of installation by placing files in the appropriate folders, but to no avail.
Please help! Thank you!Hi. I am trying to install Data Analysis Plus and it won't install. An error occurs stating that:
The value of the property 'type' cannpt be parsed. The error is: Could not load file or assembly 'Microsoft.Office.BusinessApplications.Fba, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot
find the file specified. (c:\Program Files (x86)\Common Files\Microsoft Shared\VSTO\10.0\VSTOInstaller.exe.Config line 10)
I have never had any other OS or MS Office version installed on this computer. I am running OS 8.1 and MS Office Professional 2013. I have tried to use the alternative version of installation by placing files in the appropriate folders, but to no avail.
Please help! Thank you! -
Security update 2013-004 install fails
Hi
I have tried to apply the Security update 2013-004. The SW updates requires a reboot, but the reboot does not work. It means the Mac does not reboot anymore nor can I shutdown the Mac anymore. The only way to switch if off, reboot is to hold the power button down until the systems switches of.
I tried to repair the permissions, reinstalled Lion from the App-store (the version on the app-store does not contain the security update yet), but as soon as I try to apply the update I run into the trouble.
Now my only way seems to reinstall again the OS (10.7.5), and avoid the security update, which I guess is not a ggod practice.
Any idea how I could restore the "restart" "shut down" functionality without the reinstall, and what should I do before I download the update to make it work?
Thanks
Heiko
MacBook Pro, Lion 10.7.5When you have the computer in the functioning mode, try this open Safari/prefences, general tab, where it says "Save downloaded files to:" select desktop(if it is not in the dropdown menu, click other and select desk top from the left column) This will down load it to ypur desktop, next download the stand alone installer here: (bypassing software update)
http://support.apple.com/kb/DL1677
After the down load completes, open the installer package on the desktop and follow the prompts. Use an ethernet connection if available, it is less prone to interference than a wireless, hich means it is usually lees rpone to corruption.
Hope this helps -
"Security Update 2013-004 can't be saved" WHY?
I'm trying to install updates on my MacBook Pro and I get an error message that says "Security Update 2013-004 can't be saved" and tells me to check my internet connection. Obviously my connection is fine since I'm writing this. I'm trying to update iTunes but it won't do that until this updates? I don't understand why it can't be saved.
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Indesign CS6 won't install on Windows 7 64bit via GPO
Good afternoon,
I created a installation of Indesign CS6 with application manager enterprise 3 to deploy to computers via the active directory.
It installs correctly without issue to Windows XP x86 machines however won't install to Windows 7 x64 machines.
When the computers starts it trys to install but fails and proceeds to the login screen. The following information is left in the Windows event log.
Has anyone else had this problem and more importantly know how to solve it?
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 13/08/2013 9:44:23 AM
Event ID: 1085
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: WIN7TEST
Description:
Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1085</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-08-12T23:44:23.375831000Z" />
<EventRecordID>9482</EventRecordID>
<Correlation ActivityID="{B74A3709-81F6-4B73-AA1F-9B610874B7EA}" />
<Execution ProcessID="384" ThreadID="1324" />
<Channel>System</Channel>
<Computer>WIN7TEST</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">3961</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">41590</Data>
<Data Name="ErrorCode">1603</Data>
<Data Name="ErrorDescription">Fatal error during installation. </Data>
<Data Name="DCName">\\AYR.burdekin.qld.gov.au</Data>
<Data Name="ExtensionName">Software Installation</Data>
<Data Name="ExtensionId">{c6dc5466-785a-11d2-84d0-00c04fb169f7}</Data>
</EventData>
</Event>
Log Name: System
Source: Application Management Group Policy
Date: 13/08/2013 9:44:23 AM
Event ID: 108
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: WIN7TEST
Description:
Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Management Group Policy" />
<EventID Qualifiers="0">108</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
<EventRecordID>9481</EventRecordID>
<Channel>System</Channel>
<Computer>WIN7TEST</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>Software changes could not be applied. A previous log entry with details should exist.</Data>
<Data>1603</Data>
</EventData>
</Event>
Log Name: System
Source: Application Management Group Policy
Date: 13/08/2013 9:44:23 AM
Event ID: 102
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: WIN7TEST
Description:
The install of application Adobe InDesign CS6 from policy Global-Application-Adobe InDesign failed. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Management Group Policy" />
<EventID Qualifiers="0">102</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
<EventRecordID>9479</EventRecordID>
<Channel>System</Channel>
<Computer>WIN7TEST</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>Adobe InDesign CS6</Data>
<Data>Global-Application-Adobe InDesign</Data>
<Data>1603</Data>
</EventData>
</Event>Hi Abhijit,
I am able to install InDesign CS6 manually on the machines from the CD/DVD however when trying to install it via GPO or running the msi using the msi exec commands it doesn't install and leaves the above errors in the event log.
The installation was made using the same CD/DVD and the installation works on the Windows XP clients and software other than InDesign CS6 will install to the Win 7 64-bit machines via GPO.
Cheers, -
Hi,
People at our company installed the latest Java for OSX 2013-004 1.0 Apple Update and all of our software installers failed to run anymore. The only way to kill the installer was Apple Menu -> Force Quit after that. We all had to downgrade to Java for OSX 2013-003 to work.Welcome to Apple Support Communities
I have heard problems with that update. Unfortunately, we don't know when an update will be available. Apple often releases Java updates at the same time as Oracle, but we don't know more things -
Adobe flash 11.6.602.180 won't install
This version of Adobe flash: 11.6.602.180
from here:
http://www.adobe.com/products/flashplayer/distribution3.edu.html
Won't install (at least on Windows 7), unlike all previous revisions.
What can be done?
I get this error:
Error 1722: There is a problem with this Windows Installer package. A program run as part of the setup
did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1.
location: ....\AppData\Local\Temp\InstallPlugin_11_6_602_180exe.
command: -install -msi
[This latter command, is something it must generate internally. I install the msi download like so:
msiexec /i <Pathtodownloads>/install_flash_player_11_plugin.msi /quiet /passive /qb /norestart /l+* %systemdrive%\log\flash.log
There doesn't seem to be a way to contact Adobe itself about this product problem.
Since these updates are usually security fixes, it seems like a bad thing to roll back.]
The logfile looks like this:
=== Logging started: 3/13/2013 16:06:23 ===
Action start 16:06:23: INSTALL.
Action start 16:06:23: ISSetAllUsers.
InstallShield 16:06:23: Begin SetAllUsers()
InstallShield 16:06:23: Getting records from Upgrade table
InstallShield 16:06:23: UpgradeCode: {D85A1A59-DC52-4D13-9445-EF3F379D4DB5} MinVersion: 6.0.47.0 MaxVersion: 11.6.602.180 Language: Attributes: 769
InstallShield 16:06:23: No related products for UpgradeCode {D85A1A59-DC52-4D13-9445-EF3F379D4DB5} found
InstallShield 16:06:23: End SetAllUsers()
Action ended 16:06:23: ISSetAllUsers. Return value 1.
Action start 16:06:23: AppSearch.
Action ended 16:06:23: AppSearch. Return value 0.
Action start 16:06:23: LaunchConditions.
Action ended 16:06:23: LaunchConditions. Return value 1.
Action start 16:06:23: FindRelatedProducts.
Action ended 16:06:23: FindRelatedProducts. Return value 1.
Action start 16:06:23: ValidateProductID.
Action ended 16:06:23: ValidateProductID. Return value 1.
Action start 16:06:23: CostInitialize.
Action ended 16:06:23: CostInitialize. Return value 1.
Action start 16:06:23: FileCost.
Action ended 16:06:23: FileCost. Return value 1.
Action start 16:06:23: IsolateComponents.
Action ended 16:06:23: IsolateComponents. Return value 0.
Action start 16:06:23: CostFinalize.
Action ended 16:06:23: CostFinalize. Return value 1.
Action start 16:06:23: SetARPINSTALLLOCATION.
Action ended 16:06:23: SetARPINSTALLLOCATION. Return value 1.
Action start 16:06:23: SetODBCFolders.
Action ended 16:06:23: SetODBCFolders. Return value 0.
Action start 16:06:23: MigrateFeatureStates.
Action ended 16:06:23: MigrateFeatureStates. Return value 0.
Action start 16:06:23: InstallValidate.
Action ended 16:06:23: InstallValidate. Return value 1.
Action start 16:06:23: RemoveExistingProducts.
Action ended 16:06:23: RemoveExistingProducts. Return value 1.
Action start 16:06:23: InstallInitialize.
Action ended 16:06:25: InstallInitialize. Return value 1.
Action start 16:06:25: MakePropsAvailable.
Action ended 16:06:25: MakePropsAvailable. Return value 1.
Action start 16:06:25: AllocateRegistrySpace.
Action ended 16:06:25: AllocateRegistrySpace. Return value 1.
Action start 16:06:25: ProcessComponents.
Action ended 16:06:25: ProcessComponents. Return value 1.
Action start 16:06:25: UnpublishComponents.
Action ended 16:06:25: UnpublishComponents. Return value 0.
Action start 16:06:25: UnpublishFeatures.
Action ended 16:06:25: UnpublishFeatures. Return value 1.
Action start 16:06:25: StopServices.
Action ended 16:06:25: StopServices. Return value 1.
Action start 16:06:25: DeleteServices.
Action ended 16:06:25: DeleteServices. Return value 1.
Action start 16:06:25: UnregisterComPlus.
Action ended 16:06:25: UnregisterComPlus. Return value 0.
Action start 16:06:25: SelfUnregModules.
Action ended 16:06:25: SelfUnregModules. Return value 1.
Action start 16:06:25: UnregisterTypeLibraries.
Action ended 16:06:25: UnregisterTypeLibraries. Return value 0.
Action start 16:06:25: RemoveODBC.
Action ended 16:06:25: RemoveODBC. Return value 1.
Action start 16:06:25: UnregisterFonts.
Action ended 16:06:25: UnregisterFonts. Return value 1.
Action start 16:06:25: RemoveRegistryValues.
Action ended 16:06:25: RemoveRegistryValues. Return value 1.
Action start 16:06:25: UnregisterClassInfo.
Action ended 16:06:25: UnregisterClassInfo. Return value 0.
Action start 16:06:25: UnregisterExtensionInfo.
Action ended 16:06:25: UnregisterExtensionInfo. Return value 0.
Action start 16:06:25: UnregisterProgIdInfo.
Action ended 16:06:25: UnregisterProgIdInfo. Return value 0.
Action start 16:06:25: UnregisterMIMEInfo.
Action ended 16:06:25: UnregisterMIMEInfo. Return value 0.
Action start 16:06:25: RemoveIniValues.
Action ended 16:06:25: RemoveIniValues. Return value 1.
Action start 16:06:25: RemoveShortcuts.
Action ended 16:06:25: RemoveShortcuts. Return value 0.
Action start 16:06:25: RemoveEnvironmentStrings.
Action ended 16:06:25: RemoveEnvironmentStrings. Return value 1.
Action start 16:06:25: RemoveDuplicateFiles.
Action ended 16:06:25: RemoveDuplicateFiles. Return value 1.
Action start 16:06:25: RemoveFolders.
Action ended 16:06:25: RemoveFolders. Return value 1.
Action start 16:06:25: CreateFolders.
Action ended 16:06:25: CreateFolders. Return value 1.
Action start 16:06:25: MoveFiles.
Action ended 16:06:25: MoveFiles. Return value 1.
Action start 16:06:25: InstallFiles.
Action ended 16:06:25: InstallFiles. Return value 1.
Action start 16:06:25: NewCustomAction1.
Action ended 16:06:25: NewCustomAction1. Return value 1.
Action start 16:06:25: PatchFiles.
Action ended 16:06:25: PatchFiles. Return value 1.
Action start 16:06:25: DuplicateFiles.
Action ended 16:06:25: DuplicateFiles. Return value 1.
Action start 16:06:25: BindImage.
Action ended 16:06:25: BindImage. Return value 1.
Action start 16:06:25: CreateShortcuts.
Action ended 16:06:25: CreateShortcuts. Return value 0.
Action start 16:06:25: RegisterClassInfo.
Action ended 16:06:25: RegisterClassInfo. Return value 0.
Action start 16:06:25: RegisterExtensionInfo.
Action ended 16:06:25: RegisterExtensionInfo. Return value 0.
Action start 16:06:25: RegisterProgIdInfo.
Action ended 16:06:25: RegisterProgIdInfo. Return value 0.
Action start 16:06:25: RegisterMIMEInfo.
Action ended 16:06:25: RegisterMIMEInfo. Return value 0.
Action start 16:06:25: WriteRegistryValues.
Action ended 16:06:25: WriteRegistryValues. Return value 1.
Action start 16:06:25: WriteIniValues.
Action ended 16:06:25: WriteIniValues. Return value 1.
Action start 16:06:25: WriteEnvironmentStrings.
Action ended 16:06:25: WriteEnvironmentStrings. Return value 1.
Action start 16:06:25: RegisterFonts.
Action ended 16:06:25: RegisterFonts. Return value 1.
Action start 16:06:25: InstallODBC.
Action ended 16:06:25: InstallODBC. Return value 0.
Action start 16:06:25: RegisterTypeLibraries.
Action ended 16:06:25: RegisterTypeLibraries. Return value 0.
Action start 16:06:25: SelfRegModules.
Action ended 16:06:25: SelfRegModules. Return value 1.
Action start 16:06:25: RegisterComPlus.
Action ended 16:06:25: RegisterComPlus. Return value 0.
Action start 16:06:25: InstallServices.
Action ended 16:06:25: InstallServices. Return value 1.
Action start 16:06:25: StartServices.
Action ended 16:06:25: StartServices. Return value 1.
Action start 16:06:25: RegisterUser.
Action ended 16:06:25: RegisterUser. Return value 1.
Action start 16:06:25: RegisterProduct.
Action ended 16:06:25: RegisterProduct. Return value 1.
Action start 16:06:25: PublishComponents.
Action ended 16:06:25: PublishComponents. Return value 0.
Action start 16:06:25: PublishFeatures.
Action ended 16:06:25: PublishFeatures. Return value 1.
Action start 16:06:25: PublishProduct.
Action ended 16:06:25: PublishProduct. Return value 1.
Action start 16:06:25: InstallFinalize.
CustomAction NewCustomAction1 returned actual error code 1025 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (0C:F4) [16:06:35:265]: Product: Adobe Flash Player 11 Plugin -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\mwh\AppData\Local\Temp\InstallPlugin_11_6_602_180.exe, command: -install -msi
Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\mwh\AppData\Local\Temp\InstallPlugin_11_6_602_180.exe, command: -install -msi
Action ended 16:06:35: InstallFinalize. Return value 3.
Action ended 16:06:35: INSTALL. Return value 3.
Property(S): DiskPrompt = [1]
Property(S): UpgradeCode = {D85A1A59-DC52-4D13-9445-EF3F379D4DB5}
Property(S): ProductCode = {346137E0-7160-403B-AD21-3FF01D25037B}
Property(S): ProductToBeRegistered = 1
Property(S): SourcedirProduct = {346137E0-7160-403B-AD21-3FF01D25037B}
Property(S): SOURCEDIR = F:\Archive\WindowsManagement\WindowsInstaller\Adobe\
Property(S): VersionNT = 601
Property(S): TARGETDIR = F:\
Property(S): ALLUSERSPROFILE = F:\
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): OutOfDiskSpace = 0
Property(S): MACROMED = C:\Windows\SysWOW64\Macromed\
Property(S): FLASH = C:\Windows\SysWOW64\Macromed\Flash\
Property(S): INSTALLDIR = C:\Windows\SysWOW64\Macromed\Flash\
Property(S): ISCommonFilesFolder = C:\Program Files (x86)\Common Files\InstallShield\
Property(S): ISUpdateServiceFolder = C:\Program Files (x86)\Common Files\InstallShield\UpdateService\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): CostingComplete = 1
Property(S): SourceDir = F:\Archive\WindowsManagement\WindowsInstaller\Adobe\
Property(S): TempFolder = C:\Users\mwh\AppData\Local\Temp\
Property(S): USERPROFILE = F:\
Property(S): ROOTDRIVE = F:\
Property(S): ACTION = INSTALL
Property(S): UILevel = 3
Property(S): OriginalDatabase = F:\Archive\WindowsManagement\WindowsInstaller\Adobe\install_flash_player_11_plugin.msi
Property(S): DATABASE = C:\Windows\Installer\10d68372.msi
Property(S): Privileged = 1
Property(S): MsiRunningElevated = 1
Property(S): RedirectedDllSupport = 2
Property(S): MsiWin32AssemblySupport = 6.1.7601.17514
Property(S): MsiNetAssemblySupport = 4.0.30319.1
Property(S): Date = 3/13/2013
Property(S): Time = 16:06:35
Property(S): TTCSupport = 1
Property(S): ColorBits = 32
Property(S): TextInternalLeading = 3
Property(S): TextHeight = 16
Property(S): BorderSide = 1
Property(S): ISCHECKFORPRODUCTUPDATES = 1
Property(S): ApplicationUsers = AllUsers
Property(S): AgreeToLicense = No
Property(S): _IsMaintenance = Change
Property(S): RestartManagerOption = CloseRestart
Property(S): IS_SQLSERVER_USERNAME = sa
Property(S): IS_SQLSERVER_AUTHENTICATION = 0
Property(S): SetupType = Typical
Property(S): _IsSetupTypeMin = Typical
Property(S): Display_IsBitmapDlg = 1
Property(S): BorderTop = 1
Property(S): ProductName = Adobe Flash Player 11 Plugin
Property(S): ALLUSERS = 1
Property(S): ARPHELPLINK = http://www.adobe.com/go/flashplayer_support/
Property(S): ARPNOMODIFY = 1
Property(S): ARPPRODUCTICON = ARPPRODUCTICON.exe
Property(S): ARPURLINFOABOUT = http://www.adobe.com
Property(S): ARPURLUPDATEINFO = http://www.adobe.com/go/getflashplayer
Property(S): DWUSINTERVAL = 30
Property(S): DWUSLINK = CECCA75FE9CBA098D9ACE02FFEDB978FBEECA78F69BBE0B8CE8BA7CFE97CF0AFCEBCE08FD9AC
Property(S): DefaultUIFont = Tahoma8
Property(S): DialogCaption = InstallShield for Windows Installer
Property(S): DisplayNameCustom = Custom
Property(S): CaptionHeight = 22
Property(S): DisplayNameMinimal = Minimal
Property(S): DisplayNameTypical = Typical
Property(S): ErrorDialog = SetupError
Property(S): INSTALLLEVEL = 100
Property(S): ISSCRIPT_VERSION_MISSING = The InstallScript engine is missing from this machine. If available, please run ISScript.msi, or contact your support personnel for further assistance.
Property(S): ISVROOT_PORT_NO = 0
Property(S): IS_COMPLUS_PROGRESSTEXT_COST = Costing COM+ application: [1]
Property(S): IS_COMPLUS_PROGRESSTEXT_INSTALL = Installing COM+ application: [1]
Property(S): IS_COMPLUS_PROGRESSTEXT_UNINSTALL = Uninstalling COM+ application: [1]
Property(S): IS_PROGMSG_XML_COSTING = Costing XML files...
Property(S): IS_PROGMSG_XML_CREATE_FILE = Creating XML file %s...
Property(S): IS_PROGMSG_XML_FILES = Performing XML file changes...
Property(S): IS_PROGMSG_XML_REMOVE_FILE = Removing XML file %s...
Property(S): IS_PROGMSG_XML_ROLLBACK_FILES = Rolling back XML file changes...
Property(S): IS_PROGMSG_XML_UPDATE_FILE = Updating XML file %s...
Property(S): InstallChoice = AR
Property(S): Manufacturer = Adobe Systems Incorporated
Property(S): MsiLogging = voicewarmupx
Property(S): NewProperty2 = 0
Property(S): NewProperty3 = 0
Property(S): PIDTemplate = 12345<###-%%%%%%%>@@@@@
Property(S): PROGMSG_IIS_CREATEAPPPOOL = Creating application pool %s
Property(S): PROGMSG_IIS_CREATEAPPPOOLS = Creating application Pools...
Property(S): PROGMSG_IIS_CREATEVROOT = Creating IIS virtual directory %s
Property(S): PROGMSG_IIS_CREATEVROOTS = Creating IIS virtual directories...
Property(S): PROGMSG_IIS_CREATEWEBSERVICEEXTENSION = Creating web service extension
Property(S): PROGMSG_IIS_CREATEWEBSERVICEEXTENSIONS = Creating web service extensions...
Property(S): PROGMSG_IIS_CREATEWEBSITE = Creating IIS website %s
Property(S): PROGMSG_IIS_CREATEWEBSITES = Creating IIS websites...
Property(S): PROGMSG_IIS_EXTRACT = Extracting information for IIS virtual directories...
Property(S): PROGMSG_IIS_EXTRACTDONE = Extracted information for IIS virtual directories...
Property(S): PROGMSG_IIS_REMOVEAPPPOOL = Removing application pool
Property(S): PROGMSG_IIS_REMOVEAPPPOOLS = Removing application pools...
Property(S): PROGMSG_IIS_REMOVESITE = Removing web site at port %d
Property(S): PROGMSG_IIS_REMOVEVROOT = Removing IIS virtual directory %s
Property(S): PROGMSG_IIS_REMOVEVROOTS = Removing IIS virtual directories...
Property(S): PROGMSG_IIS_REMOVEWEBSERVICEEXTENSION = Removing web service extension
Property(S): PROGMSG_IIS_REMOVEWEBSERVICEEXTENSIONS = Removing web service extensions...
Property(S): PROGMSG_IIS_REMOVEWEBSITES = Removing IIS websites...
Property(S): PROGMSG_IIS_ROLLBACKAPPPOOLS = Rolling back application pools...
Property(S): PROGMSG_IIS_ROLLBACKVROOTS = Rolling back virtual directory and web site changes...
Property(S): PROGMSG_IIS_ROLLBACKWEBSERVICEEXTENSIONS = Rolling back web service extensions...
Property(S): ProductID = none
Property(S): ProductLanguage = 1033
Property(S): ProductVersion = 11.6.602.180
Property(S): ProgressType0 = install
Property(S): ProgressType1 = Installing
Property(S): ProgressType2 = installed
Property(S): ProgressType3 = installs
Property(S): RebootYesNo = Yes
Property(S): ReinstallModeText = omus
Property(S): SHOWLAUNCHPROGRAM = 0
Property(S): SecureCustomProperties = ISACTIONPROP1;SUPPORTDIR
Property(S): UNINSTALLER_EXE = [SystemFolder]\Macromed\Flash\uninstall_plugin.exe
Property(S): RemoveFilesCA = C:\Windows\SysWOW64\Macromed\Flash\
Property(S): ARPINSTALLLOCATION = C:\Windows\SysWOW64\Macromed\Flash\
Property(S): ScreenY = 768
Property(S): ScreenX = 1024
Property(S): SystemLanguageID = 1033
Property(S): AdminUser = 1
Property(S): ComputerName = MELCHIOR
Property(S): UserLanguageID = 1033
Property(S): UserSID = S-1-5-21-828261420-3029321333-1357501504-1001
Property(S): LogonUser = mwh
Property(S): MsiTrueAdminUser = 1
Property(S): VirtualMemory = 17307
Property(S): PhysicalMemory = 16375
Property(S): Intel = 6
Property(S): Msix64 = 6
Property(S): MsiAMD64 = 6
Property(S): ShellAdvtSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): GPTSupport = 1
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): COMPANYNAME = Hewlett-Packard Company
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): USERNAME = mwh
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): MyPicturesFolder = C:\Users\mwh\Pictures\
Property(S): LocalAppDataFolder = C:\Users\mwh\AppData\Local\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): SendToFolder = C:\Users\mwh\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): RecentFolder = C:\Users\mwh\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): PrintHoodFolder = C:\Users\mwh\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): PersonalFolder = C:\Users\mwh\Documents\
Property(S): NetHoodFolder = C:\Users\mwh\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): FavoritesFolder = C:\Users\mwh\Favorites\
Property(S): AppDataFolder = C:\Users\mwh\AppData\Roaming\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): RemoteAdminTS = 1
Property(S): System64Folder = C:\Windows\system32\
Property(S): WindowsVolume = C:\
Property(S): WindowsFolder = C:\Windows\
Property(S): MsiNTProductType = 1
Property(S): ServicePackLevelMinor = 0
Property(S): ServicePackLevel = 1
Property(S): WindowsBuild = 7601
Property(S): VersionNT64 = 601
Property(S): VersionMsi = 5.00
Property(S): VersionDatabase = 110
Property(S): MsiSystemRebootPending = 1
Property(S): CLIENTPROCESSID = 14276
Property(S): CLIENTUILEVEL = 2
Property(S): CURRENTDIRECTORY = C:\Windows\system32
Property(S): REBOOT = ReallySuppress
Property(S): REBOOTPROMPT = S
Property(S): PackagecodeChanging = 1
Property(S): ProductState = -1
Property(S): PackageCode = {1B9D478C-91C3-45AF-819E-8894CD82474D}
Property(S): MsiLogFileLocation = C:\log\flash.log
MSI (s) (0C:F4) [16:06:35:383]: Product: Adobe Flash Player 11 Plugin -- Installation operation failed.
MSI (s) (0C:F4) [16:06:35:383]: Windows Installer installed the product. Product Name: Adobe Flash Player 11 Plugin. Product Version: 11.6.602.180. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
=== Logging stopped: 3/13/2013 16:06:35 ===Could you also post your flashinstall.log file?
Where do I find the Flash Player installation log on Windows?
Thanks,
Chris -
Adobe AIR won't install Mac OS 10.8.2
I'm trying to install Muse and/or a Dreamweaver Extension from a Creative Cloud account and it won't install because of a problem with AIR. I've tried installing AIR through the Muse dialogue and it crashes the installer. I've also tried to install AIR (version 3.5) directly from the Adobe site, downloading the installer separately from the Muse dialogue and recieve the below error message. What is the problem? I keep deleting old versions of Muse and Air, restarting and it's still the same problem.
HELP!
-Thea
Process: Adobe AIR Application Installer [365]
Path: /var/folders/*/Adobe AIR Installer.app/Contents/Frameworks/Adobe AIR.framework/Versions/1.0/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer
Identifier: com.adobe.air.ApplicationInstaller
Version: 3.5 (3.5.0.1060)
Code Type: X86 (Native)
Parent Process: Adobe AIR Installer [364]
User ID: 501
Date/Time: 2013-02-08 14:17:46.644 -0600
OS Version: Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report: 323825 sec
Crashes Since Last Report: 5
Per-App Interval Since Last Report: 502 sec
Per-App Crashes Since Last Report: 3
Anonymous UUID: 92B40E88-BB9E-FAC0-F6EA-D49321982A1B
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000The problem is now happening on all the Adobe software manager applications: Extension Manager and Application Manager. Crash report below.
Interval Since Last Report: 326139 sec
Crashes Since Last Report: 9
Per-App Interval Since Last Report: 100 sec
Per-App Crashes Since Last Report: 1
Anonymous UUID: 92B40E88-BB9E-FAC0-F6EA-D49321982A1B
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app/Contents/MacOS/Adobe Extension Manager CS6
__TEXT 0000000000001000-0000000000327000 [ 3224K] r-x/rwx SM=COW /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app/Contents/MacOS/Adobe Extension Manager CS6
Application Specific Information:
Performing @selector(terminate:) from sender NSMenuItem 0x153ffc0
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.adobe.ExtensionManager 0x00022b0c -[mainApp applicationWillTerminate:] + 45
1 com.apple.Foundation 0x90e93c52 __57-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_0 + 49
2 com.apple.CoreFoundation 0x96ecde01 ___CFXNotificationPost_block_invoke_0 + 257
3 com.apple.CoreFoundation 0x96e1943a _CFXNotificationPost + 2794
4 com.apple.Foundation 0x90e7c788 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
5 com.apple.Foundation 0x90e8c527 -[NSNotificationCenter postNotificationName:object:] + 55
6 com.apple.AppKit 0x98a64e19 -[NSApplication terminate:] + 2420
7 libobjc.A.dylib 0x954fe5d3 -[NSObject performSelector:withObject:] + 70
8 com.apple.AppKit 0x98927bd2 -[NSApplication sendAction:to:from:] + 436
9 com.apple.AppKit 0x98a643dc -[NSMenuItem _corePerformAction] + 529
10 com.apple.AppKit 0x98a6406b -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 163
11 com.apple.AppKit 0x98a636f4 -[NSMenu _performActionWithHighlightingForItemAtIndex:sendAccessibilityNotification:] + 79
12 com.apple.AppKit 0x987442ba -[NSMenu performActionForItemAtIndex:] + 65
13 com.apple.AppKit 0x9874426f -[NSMenu _internalPerformActionForItemAtIndex:] + 45
14 com.apple.AppKit 0x9874423a -[NSMenuItem _internalPerformActionThroughMenuIfPossible] + 106
15 com.apple.AppKit 0x987440b9 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 162
16 com.apple.AppKit 0x98a5c7ce NSSLMMenuEventHandler + 454
17 com.apple.HIToolbox 0x9096bb6b _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36
18 com.apple.HIToolbox 0x907f3594 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1343
19 com.apple.HIToolbox 0x907f2980 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 430
20 com.apple.HIToolbox 0x90806855 SendEventToEventTarget + 88
21 com.apple.HIToolbox 0x9096ba1a SendHICommandEvent(unsigned long, HICommand const*, unsigned long, unsigned long, unsigned char, void const*, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) + 498
22 com.apple.HIToolbox 0x907e2b84 SendMenuCommandWithContextAndModifiers + 70
23 com.apple.HIToolbox 0x907e2b31 SendMenuItemSelectedEvent + 268
24 com.apple.HIToolbox 0x907e29b6 FinishMenuSelection(SelectionData*, MenuResult*, MenuResult*) + 134
25 com.apple.HIToolbox 0x909b802e MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) + 623
26 com.apple.HIToolbox 0x907c3332 _HandleMenuSelection2 + 633
27 com.apple.HIToolbox 0x907c30af _HandleMenuSelection + 53
28 com.apple.AppKit 0x9891545a _NSHandleCarbonMenuEvent + 309
29 com.apple.AppKit 0x9883c0df _DPSNextEvent + 2425
30 com.apple.AppKit 0x9883b26c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
31 com.apple.AppKit 0x988316cc -[NSApplication run] + 855
32 com.apple.AppKit 0x987d46f6 NSApplicationMain + 1053
33 com.adobe.ExtensionManager 0x00024b12 main + 1426
34 com.adobe.ExtensionManager 0x00022735 start + 53
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x906f19ae kevent + 10
1 libdispatch.dylib 0x986a8c71 _dispatch_mgr_invoke + 993
2 libdispatch.dylib 0x986a87a9 _dispatch_mgr_thread + 53 -
[SOLVED] Both stable and unstable chromium-pepper-flash won't install
Hi all,
I just installed Chromium, but am unable to install Flash. It was recommended that I install pepper-flash rather than flashplugin, since the latter is deprecated. But there is a problem:
chromium-pepper-flash-stable won't install because the link to the package is invalid:
ERROR: Failure while downloading google-chrome-stable-31.0.1650.57-1.x86_64.rpm
chromium-pepper-flash won't install because the md5 checksum is invalid:
==> Validating source files with md5sums...
google-chrome-unstable_current_amd64.deb ... FAILED
LICENSE.txt ... Passed
==> ERROR: One or more files did not pass the validity check!
This leaves me with three questions:
Does this happen often, or is it a freak coincidence that both recommended Flash packages are broken on the first day I start using Arch?
I can probably find the proper package file for chromium-pepper-flash-stable, but what is recommended practice for installing it (if I am in a hurry, or just impatient)? Should I hack the PKGBUILD file myself?
Should I flag these packages as out-of-date in AUR?
Thanks!
Last edited by mhelvens (2013-12-04 22:51:39)Yes, edit the PKGBUILD yourself. Both the link and the checksum.
Have a look at the comments: https://aur.archlinux.org/packages/chro … mments=all Being broken is not an uncommon occurrence for this package.
Maybe you are looking for
-
IPod 120GB (6G) no longer syncing
After starting to experience some minor issues with my ipod (album art got mixed up and now and again a freeze) I thought it might be a good idea to restore and start afresh. Now I wish I hadn't... Ever since I have restored (and several times now) m
-
NLS support problems when using AL32UTF8 in dads.conf
Hello, Following a post by Joel Kallman, in one of the forum threads, about the mandatory use of AL32UTF8 in dads.conf, when running HTML DB v2.0, I changed my PlsqlNLSLanguage parameter accordingly. Prior to the change, I experienced some problems w
-
My endnote x3 has been unusable since yesterday (well, hadn't used it for a few weeks but was working on Snow Leopard before). Every time I open a library or even try to create one, it crashes. Have tried all other forums (official endnote and all) t
-
Validation for regular expressions special characters in java
Hi, I need to validate an user name field to an application while creating that. It has to contain only alpha numerics. can you give me the regular expression and also how to implement that. thanks, VJ
-
Trying to install lightroom 5...disk is ejected
just received lightroom 5 in the mail yesterday and tried installing it on my mac. i hear the disk spinning around and about a minute later the disk is spit out...i am running os 10.8 and the disk is compatable with mac and windows...any ideas?