SED is not appearing in accounting document

Hi Friends,
Excise has been captured with J1IEX , there i can able to see all the valus in part II tab like AED, BED, SED and Total ECS, but when i check in accounting document SED is missing, becoz of this RG23A II is printing wrongly, but when i check the previwe of the RG23II there is no colum for SED.
I have check the configuration , GL account is there againest SED. what may be the problem?
Thanks in advance
Regards,
Ramesh

solved

Similar Messages

  • ED Recovered entry not appearing in accounting document

    Dear Experts,
    In our company the the settings in vKOA is done so that in case of domestoc orders  the accounting document shows the followwing entries:
    G/L A/c                      Description
    HG022                        Customer A/c
    5xxxx                          SALES Local
    5xxxx                         ED recovered(EXD, EX1, EX2)
    5xxxx                         Central sales tax
    But in case of exports order the ED G/L accounts are same but in accounting the following entries appeear:
    G/L A/c                      Description
    HG022                        Customer A/c
    5xxxx                          SALES Local
    5xxxx                         Central sales tax
    My question is (in case of exports) why are the G/L accounts to which excise entries are hitting not showing in accounting document? How can i make the settings to show the ed recovered entry in accounting document.

    Hi,
    In Export sales, there are two scenarios.
    1. Export under Bond
    2. Export under rebate scheme
    When Export under Bond sales is processed, excise duties are exempted against exemption forms. Thus there would be no excise duties are captured in invoice and there will no posting of excise duties to GL accounts.
    But, in case of Export under rebate scheme, excise duties are posted to specific GL accounts, then only duties get captured in invoice document.
    Check which scenario you have processed.
    Regards,
    Praveen.

  • Business area not appearing in Accounting document of 543's materail doc

    Hello ,
    We have created new plant CN06 (and assigend to Company code CN06) by copying existing plant CN03 (assigned to Company code CN03). Business area CN06 was defined and assigned to plant CN06 and valuation area. When we do normal GR document business area appears in material document but when we are doing GR for sub contracting (posting key 81) with movement type 543 Business area doesnt appear in the material doc .
    In cancellation of Subcontracting material document for plant CN06(Movement type 544) Business area appears properly . We are unable to analyse the issue.
    We have checked field status through RM07CUFA program , there wn't be any mismatch.  Please required your help.
    Regards
    Mahesh Naik

    Hello ,
    We have checked
    please check the for the sales area have u assigned rule (2 or 1) or not in t-code OVF2.----- Rule assigned is -1
    please check business area is assigned to plant & division in t-code OVF0----correct assignment is there
    please check assignment of business area to sales area OVF1.--correct assignment is there .
    Still we are facing problem.
    Regards
    Mahesh Naik

  • PO number not appearing in Purchasing Document number

    Hi
    I have posted a MIRO. PO number: 4500000013. Now when i see in FBL1N & vendor open items, PO number does not appear in Purchasing Document field. Let me know how to bring the PO number.
    Edited by: Deepak Agrawal on Oct 8, 2009 11:50 AM

    Hi,
    The display of the purchasing document number for customers/vendors via the line item display is not possible. However, you can branch from the vendors/customers line item display into the document overview and there display the purchasing document number for the individual G/L account line items.
    Regards,
    Eli

  • Business area not appearing in mateial document

    Hi,
    I have created a new plant. and have made all assignment.
    while doing  testing  by making PO and doing MIGO.
    Business area is not appearing in material document posting.
    ( more over in my existing plants at the time of MIGO no account assignment tab appears.but  for this new plant account assignment tab appears though i have not assigned any thing in account asignment in PO)
    Please help.
    Regards,
    Vijay

    Hi,
    Use T.code:OMJ7 and link plant and division to your business area.
    Active Business area in T.code: OBC4 , in material management segment in ur field status group.Also Consult with your FICO team.
    Regards,
    Biju K

  • Business area not populated in Accounting Document

    Gurus
    Business Area showing in Billing document, item detail tab but not populated in Accounting Document BSEG/GSBER.
    We have upgraded 4.5b to ECC6.
    regards
    imdad

    Hi:
               This happens in instances if one invoice contains multiple business areas, then only blank space will appear in accounting document for business areas. If this is the case then invoice split should happen based on business area. Invoice split can be done through VOFM data transfer - billing document.
    However if invoice contains only one Business Area then please check in IMG --> Sales and Distribution --> Basic Function --> Account Assignment / costing --> Business Area Account Assignment....check  whether you have assigned the  Business Area to Sales Area to Rule "1".
    Regards

  • Material document 4900000006 does not include an accounting document

    Hi guys
    I created normal sales order, delivery and and released it thr VF01.
    Then I created the RE document without order reference and PGR. But while checking the accounting documents in VL02N it gives the error as follows
    Material document 4900000006 does not include an accounting document
    Diagnosis
    The system cannot find an accounting document for the material document 4900000006.
    Possible reasons for this are:
    The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
    The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
    The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
    Procedure
    Choose Continue and then choose another function.
    Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
    Please give me the solution
    Thanks in advance
    Rahul

    Hi Rahul,
    Can you tell me how did you resolve this error indetail or step by step?  I have a same error in test client.  I am doing returns with stock catergory of E while PGI and then it throws error message.
    Material document 4900000006 does not include an accounting document
    Diagnosis
    The system cannot find an accounting document for the material document 4900000006.
    Possible reasons for this are:
    The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
    The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
    The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
    Procedure
    Choose Continue and then choose another function.
    Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
    regards
    rc gopi

  • Word styles not appearing in Print Document Appearance dialog

    My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
    The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
    I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
    Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
    I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
    Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
    Thanks again,
    John

    Peter,
    I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
    Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
    Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
    Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
    Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
    John
    From: Peter Grainge [email protected]
    Sent: Thursday, October 13, 2011 8:47 AM
    To: John Dawson
    Subject: Word styles not appearing in Print Document Appearance dialog
    Re: Word styles not appearing in Print Document Appearance dialog
    created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

  • Sales order number not appears  in account assignment tab

    Hi,
    User raised PO for third party and account assignment category.But ,Sales order number  and its item not appear in account assignment tab.
    Can anybody help me.
    Lucky.

    Hi Lucky,
    Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
    Thanks for your inputs on this issue.
    Regards
    Rang

  • Tax not appearing in accounting doc wrt a material document

    Hi All,
    In one material doc's accounting doc, tax lines are not appearing. I wanted to know how the system picks up the tax code for a material doc posting. Here the posting is an inventory posting.
    Regards
    Rudra

    Basically there has been no tax calculation for an Accounting doc .User wants to know why so?
    He is telling why the tax lines are not appearing. As stated above, its a material doc which when posted,
    generated the stated accounting doc.The movt type is 702.
    Please let me know why there has been no tax line items in the accounting doc.

  • Cancelling Credit memo not reverse the accounting document

    Hello,
    Hello,
    We are facing pecular problem in production system when we Cancel the sales credit memo system is not genarating the reversal accounting document and it's genarating the entry same way credit memo.
    When we do the credit memo it's passing accounting entry in the following way.
    Posting key 11 with customer (credit entry)
    Posting key 40 with revenue (debit entry)
    Posting key 40 with tax (debit entry)
    When we cancel the credit memo system is not passing the reversal entry and once again it's passing the same entry.
    Posting key 11 with customer (credit entry)
    Posting key 40 with revenue (debit entry)
    Posting key 40 with tax (debit entry)
    Could you some body explain me what is the problem
    Regards,
    Satya
    Regards,
    Satya

    Dear senthil
    As I said earlier, once the accounting document is generated, the respective amounts will flow in debit / credit entry of the document flow.
    Once you cancel the billing document, for this cancelled billing, one more accounting document will be generated and with this, the above entries would be vice versa.  That is debit entries get credited and credit entries get debited and you cannot hide this from SAP
    thanks
    G. Lakshmipathi

  • Cost Center not updated in accounting documents generated in SAP RE-Fx

    Hi Experts,
    I'm facing an issue wherein I don't see the cost centers getting updated in the accounting documents generated from RE postings.
    Pl. note that the appropriate cost center (relevant to the cost center) is maintained in the rental objects.
    What is the customizing settings I'm missing out due to which I don't see the cost center updated in the accounting documenmts?
    Thanks & Regards
    Shantanu

    HI Shantanu,
    As far as I know, in RE-FX we can post the cost to the RE object directly. All the objects in RE-FX (i.e. BE, BU, PR, RO, RECN, SU, etc) are cost objects in themselves. However, to post the cost to Cost centers you will need to run the CO settlement. Again CO settlement rule is available in all these objects.
    Please refer the SAP Library for further explanation:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/00/80383b1b793821e10000000a114084/frameset.htm
    Regards
    Rohit

  • Condition not Appearing in Account Determination Analysis

    Hi,
    we have some new conditions. these are CRM based. for some reason they are not appearing in the account determination analysis
    config Condition 1
    Class: Prices
    Calc Typ : Percentage
    Not possible to process Manually
    Item Condition
    pricing procedure
    Condition 1
    Statistical
    has Account Key.
    thanks for the help.

    Its a Pricing condition that u have configured. It will appear in Pricing analysis.
    regards

  • WHT tax not displaying in accounting document

    Hi
    I am trying to configure Withholding tax for AR process. I have attached the WHT tax type and code in the customer master. I try to create a debit note request, i do not get a popup which shows the WHT from the customer master for us to choose the appropriate WHT after which this reflects in a tab in the Sales order. After this when the billing is done and accounting documents are generated i am not able to see the tax showing up when i click on the icon withholding tax data. I have configured WHT condition type WCOD and assigned the same to the pricing procedure, i am able to see the condition record as statistical in the conditions tab in sales order.
    Thanks
    Govind

    Hi,
    Are you following the Std SAP Import process for the country?
    If its for India.
    Refer the link.
    http://help.sap.com/saphelp_470/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
    Harish

  • Condition maintained at Hierarchy not appearing in Sales document

    Hi
    We have a Condition for Discount, maintained for key combination "Sales area/Customer/ Product hierarchy".
    There are two condition records maintained for the above key combination.
    1 - Sales area/Customer/ Product hierarchy/group/ subgroup
    2 - Sales area/Customer/ Product hierarchy/ group
    In Access sequance of this condition, subgroup has priority 1 and group has priority 2.
    In condition record for the first combination (Sales area/Customer/ Product hierarchy/group/subgroup)has 'deletion indicator' checked.
    Condtion record found by the system in sales document pricing is the first combination which has 'deletion indicator' and condition record for second combination which is also maintained is IGNORED  So in the pricing the condtion is not appearing.
    Please let us know if this is standard SAP functionality or a defect.
    Thanks.

    Amritpal Singh  ,
    You  have a Condition for Discount, key combination "Sales area/Customer/ Product hierarchy".
    According to what i perceive
    1 - Sales area/Customer/ Product hierarchy/group/ subgroup - Delete indicator is activated which means the value for this ondition record will not be displayed.
    2 - Sales area/Customer/ Product hierarchy/ group is ignored
    If it is so, check by double clicking item details screeen --> Conditions tab --> and Click Analysis Tab then choose the condition type then in right side of the screen you can see the details.
    Inform us what details it is posting, if value is showing or not showing, also check whether you have mainatined condition type as Manual.. Check it....
    Revert
    Regards
    Sathya

Maybe you are looking for