Sed usage question

The last column of the log file shows the full path to a file and some entries CONTAIN spaces.  I want to use sed to substitute the space to an underscore, BUT I only wanna do it from a particular character to the end of the line.  How can I accomplish this?
Tue Aug 23 20:38:01 2011 /media/data/test file 1.txt
Wed Aug 24 11:30:01 2011 /media/data/test file 2.txt
Fri Aug 26 17:13:01 2011 /media/data/test file 3.txt
Sun Aug 28 17:16:02 2011 /media/data/test file 4.txt
The effect I'm after it convert the about to the following:
Tue Aug 23 20:38:01 2011 /media/data/test_file_1.txt
Wed Aug 24 11:30:01 2011 /media/data/test_file_2.txt
Fri Aug 26 17:13:01 2011 /media/data/test_file_3.txt
Sun Aug 28 17:16:02 2011 /media/data/test_file_4.txt
Tried:
sed '/\// s, ,_,' log
But of course, this will change the very first space to an underscore, not the space and all subsequent spaces AFTER the first forward slash.
Last edited by graysky (2011-11-13 23:32:12)

Remove White Space From Specific Columns In A Text File
How Can I Strip White Space From The Start And End Of Fields Using Awk
Edit: sorry, didn't see your last post before posting.
Last edited by /dev/zero (2011-11-13 23:46:48)

Similar Messages

  • / usage questions...

    Hello.
    I have 2 questions:
    1. I have noticed that my / partition's used space increased by ~10M from the last time I've checked it, from 111M to 121M. What could be the cause of that? (see the info below...)
    2. The output of df and du is not what I am expecting it to be. I.e. there are differences between the disk usage reported by these 2 commands on the / partition. What could be the cause of this? (see the info below...)
    Any reply or any RTFM re-dirrectioning is appreciated.
    TIA
    Info:
    [root@guns /]# df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/ide/host0/bus0/target0/lun0/part5
    189M 121M 68M 65% /
    none 235M 0 235M 0% /dev/shm
    tmpfs 235M 4.0K 235M 1% /tmp
    /dev/ide/host0/bus0/target0/lun0/part2
    31M 5.2M 24M 18% /boot
    /dev/ide/host0/bus0/target0/lun0/part6
    2.4G 713M 1.7G 30% /usr
    /dev/ide/host0/bus0/target0/lun0/part7
    1.9G 374M 1.5G 20% /var
    /dev/ide/host0/bus0/target0/lun0/part8
    57G 35G 23G 62% /home
    /dev/ide/host0/bus0/target0/lun0/part9
    957M 486M 472M 51% /opt
    [root@guns /]# ls
    bin boot dev etc home lib mnt opt proc root sbin sys tmp udev usr var
    [root@guns /]# du -sh bin/ dev/ etc/ lib/ mnt/ proc/ root/ sbin/ sys/ tmp/ udev/
    2.8M bin/
    0 dev/
    5.5M etc/
    64M lib/
    0 mnt/
    481M proc/
    12M root/
    5.2M sbin/
    du: cannot access `sys/bus/pci/drivers/Intel(R) 830M/845G/852GM/855GM/865G Framebuffer Driver': No such file or directory
    0 sys/
    4.0K tmp/
    0 udev/
    Here's my dmesg output in case it helps...
    Linux version 2.6.11.7-ARCH (root@earth) (gcc version 3.4.3) #1 SMP Sat Apr 9 13:37:54 PDT 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001dffc000 (usable)
    BIOS-e820: 000000001dffc000 - 000000001dfff000 (ACPI data)
    BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    479MB LOWMEM available.
    On node 0 totalpages: 122876
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 118780 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 ASUS ) @ 0x000f6b10
    ACPI: RSDT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc000
    ACPI: FADT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc080
    ACPI: BOOT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc040
    ACPI: DSDT (v001 ASUS A7VI-VM 0x00001000 MSFT 0x0100000b) @ 0x00000000
    ACPI: PM-Timer IO Port: 0xe408
    Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1ff0000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda5 vga=773 ro
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (013e3000)
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 807.525 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 480548k/491504k available (4086k kernel code, 10360k reserved, 1236k data, 288k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 1597.44 BogoMIPS (lpj=798720)
    Security Framework v1.0.0 initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 64K (64 bytes/line)
    CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Enabling fast FPU save and restore... done.
    Checking 'hlt' instruction... OK.
    ACPI: setting ELCR to 0200 (from 0e00)
    CPU0: AMD Duron(tm) Processor stepping 01
    per-CPU timeslice cutoff: 182.83 usecs.
    task migration cache decay timeout: 1 msecs.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    CPU0 attaching sched-domain:
    domain 0: span 1
    groups: 1
    domain 1: span 1
    groups: 1
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20050228
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Via IRQ fixup
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 12 devices
    PnPBIOS: Disabled by ACPI PNP
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    ** PCI interrupts are no longer routed automatically. If this
    ** causes a device to stop working, it is probably because the
    ** driver failed to call pci_enable_device(). As a temporary
    ** workaround, the "pci=routeirq" argument restores the old
    ** behavior. If this argument makes the device work again,
    ** please email the output of "lspci" to [email protected]
    ** so I can fix the driver.
    pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
    pnp: 00:02: ioport range 0xe800-0xe80f has been reserved
    pnp: 00:02: ioport range 0xe200-0xe27f has been reserved
    Simple Boot Flag at 0x3a set to 0x1
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    devfs: 2004-01-31 Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    Installing knfsd (copyright (C) 1996 [email protected]).
    SGI XFS with ACLs, security attributes, no debug enabled
    SGI XFS Quota Management subsystem
    Initializing Cryptographic API
    Applying VIA southbridge workaround.
    PCI: Disabling Via external APIC routing
    vesafb: framebuffer at 0xf0000000, mapped to 0xde880000, using 1536k, total 32768k
    vesafb: mode is 1024x768x8, linelength=1024, pages=41
    vesafb: protected mode interface info at c000:7f88
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    ACPI: Power Button (FF) [PWRF]
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Processor [CPU0] (supports 16 throttling states)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
    agpgart: Maximum main memory to use for agp memory: 409M
    agpgart: AGP aperture is 64M @ 0xf8000000
    [drm] Initialized drm 1.0.0 20040925
    intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
    intelfb: Version 0.9.2
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    spurious 8259A interrupt: IRQ7.
    VP_IDE: IDE controller at PCI slot 0000:00:07.1
    VP_IDE: chipset revision 6
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: Maxtor 6Y080L0, ATA DISK drive
    hdb: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    hda: max request size: 128KiB
    hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
    hda: cache flushes supported
    /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 >
    hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
    libata version 1.10 loaded.
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    psmouse.c: Failed to reset mouse on isa0060/serio1
    input: PS/2 Generic Mouse on isa0060/serio1
    psmouse.c: Failed to enable mouse on isa0060/serio1
    md: linear personality registered as nr 1
    md: raid0 personality registered as nr 2
    md: raid1 personality registered as nr 3
    md: raid10 personality registered as nr 9
    md: raid5 personality registered as nr 4
    raid5: measuring checksumming speed
    8regs : 1080.000 MB/sec
    8regs_prefetch: 1020.000 MB/sec
    32regs : 812.000 MB/sec
    32regs_prefetch: 764.000 MB/sec
    pII_mmx : 2168.000 MB/sec
    p5_mmx : 2904.000 MB/sec
    raid5: using function: p5_mmx (2904.000 MB/sec)
    raid6: int32x1 332 MB/s
    raid6: int32x2 410 MB/s
    raid6: int32x4 265 MB/s
    raid6: int32x8 253 MB/s
    raid6: mmxx1 675 MB/s
    raid6: mmxx2 1136 MB/s
    raid6: sse1x1 644 MB/s
    raid6: sse1x2 1058 MB/s
    raid6: using algorithm sse1x2 (1058 MB/s)
    md: raid6 personality registered as nr 8
    md: multipath personality registered as nr 7
    md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
    device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 32Kbytes
    TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    ACPI wakeup devices:
    PCI0 PCI1 UAR1 UAR2 USB0 USB1
    ACPI: (supports S0 S1 S4 S5)
    devfs_mk_dev: could not append to parent for md/0
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    ReiserFS: hda5: found reiserfs format "3.6" with standard journal
    ReiserFS: hda5: using ordered data mode
    ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda5: checking transaction log (hda5)
    ReiserFS: hda5: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 288k freed
    Adding 96380k swap on /dev/discs/disc0/part3. Priority:-1 extents:1
    Adding 96348k swap on /dev/discs/disc0/part10. Priority:-2 extents:1
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    ReiserFS: hda6: found reiserfs format "3.6" with standard journal
    ReiserFS: hda6: using ordered data mode
    ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda6: checking transaction log (hda6)
    ReiserFS: hda6: Using r5 hash to sort names
    ReiserFS: hda7: found reiserfs format "3.6" with standard journal
    ReiserFS: hda7: using ordered data mode
    ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda7: checking transaction log (hda7)
    ReiserFS: hda7: Using r5 hash to sort names
    ReiserFS: hda8: found reiserfs format "3.6" with standard journal
    ReiserFS: hda8: using ordered data mode
    ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda8: checking transaction log (hda8)
    ReiserFS: hda8: Using r5 hash to sort names
    ReiserFS: hda9: found reiserfs format "3.6" with standard journal
    ReiserFS: hda9: using ordered data mode
    ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda9: checking transaction log (hda9)
    ReiserFS: hda9: Using r5 hash to sort names
    Real Time Clock Driver v1.12
    8139too Fast Ethernet driver 0.9.27
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
    eth0: RealTek RTL8139 at 0xded90000, 00:50:fc:cd:88:dd, IRQ 10
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    Forcing 10Mbps half-duplex operation.
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 9 (level, low) -> IRQ 9
    PCI: Setting latency timer of device 0000:00:07.5 to 64
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    Initializing USB Mass Storage driver...
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
    ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low) -> IRQ 9
    uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    uhci_hcd 0000:00:07.2: irq 9, io base 0xd400
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 9 (level, low) -> IRQ 9
    uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
    uhci_hcd 0000:00:07.3: irq 9, io base 0xd000
    uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    usb 1-2: new low speed USB device using uhci_hcd and address 2
    usbcore: registered new driver hiddev
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.2-2
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Disabled Privacy Extensions on device c05d68a0(lo)
    Vendor: USB MASS Model: STORAGE DEVICE Rev: 0.10
    Type: Direct-Access ANSI SCSI revision: 02
    Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
    usb-storage: device scan complete
    eth0: no IPv6 routers present

    The PC was indeed turned off between the two checks.
    However the first check was not performed right before the shutdown, but few hours before it.
    :idea:
    (...) varying from browser cache data increase to a cronjob like updatedb, or even you installing or downloading something.
    When I've read these words I have started to "scroll" back in my memory buffer and eventually I've remembered that the only thing I did as superuser was to download some Firefox extensions which (surprise or not...) summed up to ~12M.
    So we have the answer for this one too thanks to your hints
    PS: That's exactly the reason why I've made a small / partition - to keep a close eye on it's usage and to ring some allarms when needed.
    Again, thank you. 

  • CPU Usage Question between Premier and Media Encoder

    Hey guys,
    Here is the question. I just built a new machine with the following specs:
    Intel i7 2.66GHz process overclocked to 3.2GHz
    12GB Memory
    Nvidia 260 Overclocked video card.
    When I export a video from Adobe Premier into Media Encoder, all 8 cores peg out at 100% and thus my CPU temp get hot really quick (78 - 80 degrees Celsius)
    Now if I take the same original video file and just drag it into Media Encoder, my 8 cores only show about 24-40% usage and the temp only gets to around 55-60 degrees Celsius.
    What is causing such a big difference in CPU usage? I'm afraid to use Adobe Premier as it causes the CPUs to max out everytime. I want to edit my videos, but as stuck with just using AME on the original files.

    I suspect its simply because in the first case Pr and AME are both running. In the later, just ame loading the Pr project. In the forst case two projects are running simultaneously, the one in Pr and a temp copy in AME.
    But more troublesome to me is why youve built a system that cant be maxed out. IN editing, we Want the CPUs to peg to process as fast as possible. IMHO; You should re-think the design of your workstation if it overheats so easily.
    Curt

  • Widget RAM usage Question

    Some questions of Widgets and RAM usage:
    a) when you close dashboard/widget RAM usage eventually drops to zero?
    b) when you de-activate widgets, do they use any RAM even if you activate Dashboard?
    c) anyone have experience with that 'turn widgets on at login' app? RAM usage?
    THanks.

    Hello,
    As far as I know and having recently been testing on my own machines, Widgets do seem to play a pretty big role in RAM usage.
    Strangely enough, I've noticed it on my G5 the most (probably because I use it more), that when Widgets are off, everything seems qiute a bit more snappy...apps launch MUCH faster, and actions take less time.
    I really like Widgets for the most part, but there seem to be memory leaks the longer they're enabled, and the longer the machine is up and running.
    Relaunching the dock seems to work SOME of the time...restarting seems to always work.
    You can view what's going on in the Activity Monitor, located in your Utilities folder.
    You can disable Widgets by this method in the Terminal:
    To turn Dashboard off:
    defaults write com.apple.dashboard mcx-disabled -boolean YES
    To turn Dashboard on:
    defaults write com.apple.dashboard mcx-disabled -boolean NO
    You have to restart the Dock after making either change for it to take effect:
    killall Dock
    or Onyx has this ability.
    After doing this I would suggest a restart just to make sure.
    After doing so, launch Activity Monitor to see your free RAM.
    Hope this was helpful.
    G5 Dual 2.0 2 GHZ, 2 GB RAM, G4 Dual 450, iBook Graphite SE   Mac OS X (10.4.5)  

  • Final Cut Server Usage Question...

    I have just started researching this product and confused a little about it. I am the IT dept at a small advertising agency that does quite bit of video work.
    Mostly all of the workstation in the office are PowerMac G5's that clock in at dual 2.2GHz or above with 4GB of RAM
    We also have an Xserve G5 (Dual) with 4GB of RAM a 2GB fibre card installed and an apple RAID system as well. The office is all wired with 10/100.
    With final cut server - will they be able to actullay edit video over the network on the RAID through the Xserve. Is that what this software is for? Sorry for such a lame question. If not is this basically like Adobe's Bridge application?
    Let me know.

    Yes it does do basically what your saying, You can leave the source media on the server and just edit from your local machine. You can also download proxies (lower res version of the source media) and edit on a laptop or with a PC without having to move the large source files.
    I cant imagine any reason why any company or small business using more than one editing machine wouldn't go for this solution
    Does that answer your question?

  • Sleep usage question - not problem

    Sleep seems to work differntly on my new iMac compared to my old G4 FP iMac.
    Question - are these observations below normal?
    1. When I used to put my G4 to sleep (by clicking apple/sleep), my G4 would seem to more completely sleep. Even my external Lacie firewire drive wuold turn off its light and shut down. But with my intel iMac, the light on the external drive does not turn off.
    2. It seems like the iMac fan is still running after putting it to sleep. When I check the next morning the iMac still seems warm/hot with the fan still running(though amost silently).
    3. Also I notice that my G4 would provide the stobing light only when the computer was put to sleep, if the monitor alone was sleeping the strobing light would not flash, but with the intel iMac the strobing light will flash if the monitor has timed to sleep, but the computer has not.
    4. I'd also note that I have the preference set to allow hard drive to sleep. And I do find that I can hear the hard drive starting up again (especially the firewire drive) after not using the drive for a while. Nevertheless, the firewire drive light is on all the time.
    Thanks for any comments,
    Tony

    554/3000
    Hi Tony,
    Yes, it seems the light (steady or pulsing) "tasks" have changed since the G4 iMacs.
    See here:
    - http://docs.info.apple.com/article.html?artnum=58016
    So it may very well be different again with the new Core Duo iMacs?
    Of course your computer is awake and works, if it's only the display sleeping.
    Axl

  • The usage question of inputComboboxListOfValues

    1.Can I disable the popup search on inputComboboxListOfValues ?
    2.I set the items attribute according to Tag reference,but it seems not work.
    I add items="#{backingBeanScope.backing_LOVSuggestion.allItems}" the List contains javax.faces.model.SelectItem ,But Jdev said the items attribute is deprecated,so that means I can't use it,I must implement the inputOfValuesModel? I study the adf demo, it seems a little complex,I only need a suggestion hints and construct the list from managed bean,and not need the popup search.
    3.each time I click the combox down arrow,I find the backing bean construction method is called, I bind the combox to the backing bean's attribute. I think the construction method will only be called once during the page construction,but it not.What the lifecycle is it ? or my configuration is wrong ?

    ey finally I've succeded into lauching something from
    a telnet session. Now my question is, how to make it
    run permanently, even if I leave my telnet session ?Assuming the server is UNIX, "nohup java Foo &" will do the job.
    "nohup" tells the system not to shut it down when you exit.
    The "&" tells the system to put the program into the background.
    Bhav

  • The new Yosemite Photos app local storage usage question

    Hi,
    Did anyone check the local storage usage for the new Photos on Yosemite?
    How much space does it take for all the lores photos locally if the originals are stored in iCloud.
    Lets say if 100GB of RAW files are migrated from Aperture in to Photos to cloud. This should be 100GB in the cloud and how much on OS X?
    Can a RAW file still be downloaded from cloud later or are they transformed to jpgs once uploaded?
    What if there is not enough storage for all lores photos on iOS or OS X representing all the original iCloud photos?
    I'm really puzzled about this.
    Thanks

    I just installed the Yosemite upgrade with Photos.  I don't use Aperture of the iCloud, but the iPhotos library migrated with about the same disk space, but it is doubled, because the old iPhoto library is still on disk.

  • EventHandler - Basic usage question

    Hi,
    I have a very simple question (so it seems) about java.beans.EventHandler
    How does it work???
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.beans.*;
    class TestGUI extends JFrame {
        TestGUI() {
             JButton b = new JButton("Press");
             getContentPane().add(b);
             b.addActionListener((ActionListener)
                  EventHandler.create(ActionListener.class, this, "test")
            pack();
            show();
        public void test() {
             System.out.println("Ok!");
        public static void main(String[] args) {
            new TestGUI().setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    }It won't find the "test" method, and throws an exception (an ArrayIndexOutOfBoundsException, interestingly, but that is just a bug on EventHandler part) . What am I missing? I've searched the forums and seen quite many posts with about the same question - but without replies.
    Thanks

    That is rather interseting, I guess. I used this code, and everything worked fine. I really don't see a difference 'tween what I did and what you did...:
    public class EHTest extends JFrame
         EHTest()
              super("EHTest");
              JPanel left = new JPanel();
              left.setLayout(new GridLayout(3,0));
              JButton[] buttons = new JButton[6];
              for (int i = 0; i < 6; i++)
                   buttons[i] = new JButton("Button: "+i);
                   buttons.addActionListener((ActionListener)
                                  EventHandler.create(ActionListener.class, this, "doSomething"));
                   left.add(buttons[i]);
              setContentPane(left);
              pack();
              setVisible(true);
         public void doSomething()
              System.out.println("Something");
         public static void main(String[] args)
              new EHTest();

  • Regular expression usage question

    Hi there.
    I have a 200 bytes EBCDIC variable record which I need to break down into fields. Fields are positional and are either text, binary numbers, packed-decimal and 64bytes long numbers.
    My question is. Can regular expression handle this complex data.
    I want to isolate each field into their corresponding format. EBCDIC into ASCII text, binary into java Integer and so on.
    The reason for using reqular expression is because the record format could change and regular expression would be easier to modify without having to change the code.
    Your words of advice are highly appreciated.
    Please advice.
    Regards,
    Ulises

    Regular expressions? I don't think so.
    If you have a situation where positions 1-3 might be a binary number like client number, and the format might change so it moves to positions 12-14, then you could certainly write a record-format class to encapsulate that sort of information. In fact that would be a very good idea. But I can't imagine how a regular expression would help in getting a number out of three bytes, for example.

  • About the hosts file (syntax/usage question)

    Hi,
    I am trying to block a handful of different websites that I do not want my daughter to use right now.  I would like to use the hosts file to do this.  Although I have basic familiarity with the hosts file and editing it, I am not completely certain as to how it works and how DNS works.  If I want to, for example, block "yahoo.com" and all of its subdomains, would the following be an acceptable/valid entry?
    127.0.0.1 *.yahoo.com
    By not listing the subdomains of "yahoo.com", would that make it any liklier for those webpages to get through?  If I were to also list out all of the "yahoo.com" subdomains that I have knowledge of along with the previous entry, would that cause any problems?
    And the second part of my question is: Is the hosts file ever not top priority in lookup (on OS X 10.6.8, if it matters); and if so, is there a good way to make it always first?
    Any help would be appreciated!
    Thank you,
    Michael

    Use parental controls, maybe Dnsmasq, or a nanny-capable firewall-gateway-router box that's been configured on the edge of your network.
    The /etc/hosts file also has specific sequence to get it reloaded; that file is read once and subsequenty cached.  IIRC, you need to either /sudo dscacheutil -flushcache/ or /sudo killall -HUP mDNSResponder/ the DNS resolver.
    If your child is technically inclined, or knows how to do basic internet research, or has discussions with the more nerd-ish among her peers, your child can learn how to bypass /etc/hosts and Dnsmasq using her own DNS translations, or with her own DNS services.  That possibility would point toward either parental controls (easy), or the firewall-gateway-router box (added cost, but can block some or all systems on your local network).
    Here's how easy it is to bypass the /etc/hosts block; launch Terminal.app and issue the equivalent of:
    dig +short @8.8.8.8 host.example.com
    for the host.example.com host that you're (she's) interested in.  (There are other commands that can be used; more than just dig can be used here, and there are web sites that can perform this translation for you.)  Then connect to the IP address that this command emits.  Your /etc/hosts block will not prevent this, and will not block this.
    If your daughter is somewhat more technically savvy, a VPN will bypass the /etc/hosts blocks.  She'll need access to a VPN server, and those are available from various free and very low-cost sources...

  • Mifi billing usage question

    Dumb question... But if just leave my Mifi on all the time acting as my in house wifi.. I'm only billed if i'm actually on right? It's not considered "on" unless I'm actually searching or whatever right?

        Dear Skyline,
    Good afternoon. I am sorry to hear you are looking to change carriers. We value you as a customer and certainly do not want to lose you. What's making you want to change carriers? Is there anything we can help with?
    When cancelling service, it is always set to cancel at the end your bill cycle date. This is to to avoid any overage that may be caused by a prorated bill. Verizon Wireless bills a month in advance, so you have already been billed for service up until the end of the current bill cycle. This will allow your final bill to have a zero balance as long as there is no overage or cancellation fee.
    Please let us know if there is anything we can help with in retaining our wireless relationship for many more years to come.
    Thank You,
    MichelleS_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Ellipses 7 Battery usage Question

    Why does so much battery drain come from "Cell Standby" when the device will not make calls?

    I went through the same problems on my Motorola Droid Mini with 4.4.2.  The battery drains in hours in sleep mode, the processing is so slow you can barely type on it. Even with data usage turned off under Battery you can see cellular usage is the top user.  All I can say is the battery usage should get much better if they send out a 4.4.4 update.  I don't know if it will be as good as it was before 4.4.2 but my Mini got better.
    There are quite a few problems with 4.4.2 that I have seen and I don't use it for much because of this. I do emails and some light browsing, which can still be difficult with the bogged down speed.
    Just a few that I've noticed.
    The Chrome browser bookmark widgits constantly disappear from the screen.
    The email app lost the Select All ability which really helps with junk folders.
    "Everything", and I mean everything works slower.
    I don't know if 4.4.4 will or should allow installing apps to the SD card because my Droid Mini doesn't accept cards.
    Verizon, tell whoever it is to hurry up with 4.4.4, or anything better!

  • Fds.swc usage question

    FlashBuilder 4 can autogenerate code that uses fds.swc to enable paging for datagrid.  However, fds.swc contains classes that are livecycle specific.
    My dev team has copies of FlashBuilder 4, but also we choose to use IntelliJ Idea for Flex development as well. So once the data paging auto-generated code has been created from Flash  Builder 4, is there anything (legally or technically) preventing us from  using that code outside of FB4?  Or another way to phrase it would be:  is the fds.swc to be used only within FB4, since it's not part of the  open source Flex  4 SDK?
    My original question can be found here at the Blazeds forum.
    Thanks.

    Thank you for your reply.
    I am using my Apple keyboard, so I will have to go with the second one. But I am having problems drawing the curve! Can you give me instructions, please? When I click and drag there is just a selection box and if I click, nothing happens!

  • Power Draw Usage Question?

    I am not sure this is the right forum for this question, but it seems like the best bet. I am looking for a Mac that can at least run 10.4 and be left on 24/7. The computer will not be allowed to go into standby nor power down its hard drive.
    I am looking for the lowest power draw possible as processor performance is not an issue in this application. I think the Mac Mini is the likely candidate, but I was wondering if there are older Macs (Cube?) with lower power draw, or maybe I am better off with a laptop with the screen turned off.
    Any ideas?
    Todd

    Hi toddlydavis
    Take a look here: Specifications
    This will give you Apple's published specifications for all of their products and a starting point.
    Luck-
    -DaddyPaycheck

Maybe you are looking for

  • Can't Add Credit Card (submit button doesn't work)

    Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization. The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do any

  • Memory overflow in RSA3 but not in FM on which datasource created

    Hi I am getting the short dump in the generic datasource extraction ( To extract CDPOS and CDHDR data) which is based on a FM. when i directly execute the FM its not giving any dump and giving me correct data, but when execute through RSA3, it gives

  • Embedding a youtube video in Powerpoint 2010 via a shockwave flash object

    We have a user, has found recently, when he adds a 'shockwave flash object' in Microsoft PowerPoint 2010, and adds a YouTube link, next to the "movie" field within the properties of the shockwave flash object, it will not show the YouTube video windo

  • Phone Number Tapping in Calendar

    So why is there not a feature that allows me tap a phone number in the calendar to call it? For instance I set a reminder "Call John 323-555-5555" - the alert pops up and then I just tap the number from there. That's kind of annoying that I can't do

  • Automatically lauching vi.exe to view files.

    Hi! Here is my problem: I would like to build a kind of MDI application using Labview. I want this application (let's call it 1DView) to be abble to open Data files "doubled clicked" by the user in the Windows File manager. So far, I've been abble to