See All devices

Hi,
Is there a way to see and manage all devices where are configurate my Apple ID?
For example i need to see how many devices use my Apple ID for Imessage??? or how many devices use my "streaming foto"???
Thx for help.

I am new at working the Extreme and Express-- however I found that when you run the AirPort Utility, then select manual settings, then click on wireless devices (where it shows actual # of clients connected)that a new window is opened that shows the attached devices by IP address and MAC, if you then click the DHCP tab at the top of this pane it will also show the non-wireless devices. Now I have noted that not all of my devices will show up here-- I have been having trouble getting a HP Media Vault recognized. It is connected by ethernet to the Extreme and shows up on my Vista PC's Norton network map...
Hope this is helpful.

Similar Messages

  • How to see all devices that are connected to Apple ID

    How to see all devices that are connected to Apple ID

    Are you using a software to see all devices that are supposed to be connected to your router? You can reset and start over with your router.  Make sure you have a security enabled on it like WPA Personal. You can try DHCP Reservation as well to ensure that the devices that will have access to your router are only the ones you included on the list.

  • How can I see all devices using my airport express?

    Is there any way to see all devices using my airport express for wifi connection?

    Open Macinotsh HD > Applications > Utilities > AriPort Utility
    Select the AirPort Express and click on Manual Setup
    Click directly on the word Wireless Clients about 2/3 of the way down the page to see the MAC Address of each connected device along with the IP address that has been assigned.
    You will need to do a bit of experimenation to be able to identify which device is which based on the MAC address.
    Disconnect all but one device and note the MAC address. You now know that product that is.
    Turn that one off and connect another. You now know what that device is, etc.
    If you have 4 wireless devices...and you see 5 connected devices.....you may have an unwanted guest.

  • I Wanna See All Devices That Are Connected To My Router

    I have a E1200 router and it's pretty good however I've noticed that there are 12 devices connected to my router when infact there should only be 4 devices connected. I would like to see all the devices that are connected and disconnect the ones that don't belong HELP! 
    Solved!
    Go to Solution.

    Are you using a software to see all devices that are supposed to be connected to your router? You can reset and start over with your router.  Make sure you have a security enabled on it like WPA Personal. You can try DHCP Reservation as well to ensure that the devices that will have access to your router are only the ones you included on the list.

  • Can't see all devices from one AccessPoint to another? What is best setup to extend wireless coverage?

    We have just moved into a new apartment with concrete walls, hence WiFi signal is quite weak in the other end of the apartment.  Not all devices can see each other depending on which AP i am associated to.
    Basically I want to have any wired/wireless devices be able to see my NAS/Office based components and keep the LivingRoom tidier.  Only device in LivingRoom will be ISP components and AppleTV.
    Some additional notes on current setup
    - LivingRoom has the ISP issued Router/AccessPoint
    - the ISP Router/AP is currently setup as a) AccessPoint b) DHCP server and c) default gateway to get to the Internet
    - LivingRoom AP SSID is 'LivingRoom'
    - DHCP pool is on the 192.168.1.0/24 range
    - Default GW is 192.168.1.254
    - in the LivingRoom i am also using the Router/AP ethernet ports for AppleTV
    - connected to the Router/AP is a long Ethernet cable to the other end of the apartment in the Office
    - on other end of the long Ethernet cable is an Airport Extreme in the Office on the WAN port
    - the AirportExtreme is setup in 'Bridge' mode
    - Connected to the Office_AirportExtreme is a) a NAS device physically in the Office via Ethernet cable b) WebCam in BedRoom2 via WiFi
    - Office_AirportExtreme SSID is 'Office'
    - all devices confirmed are assigned an IP from the LivingRoom Router/AccessPoint and on the 192.168.1.0 pool
    - at this time in only have WebCam and NAS however Plex and Desktop coming shortly as we are still unpacking
    Issue
    a) When my laptop is associated to SSID 'Office' i can see the NAS and WebCam; able to PING and hit via HTTP
    b) When my laptop is associated to SSID 'LivingRoom' i CANNOT see the NAS/WebCam;  I am unable to hit the two devices behind the Office_AirportExtreme via PING/HTTP and I am able to surf the Internet, however cannot see the NAS/WebCam
    Question
    a) is there some other config on the Office_AirportExtreme that must be done to disable any Firewall type capabilities that is limiting the ability for devices on other side of the Office_AirportExtreme from seeing the devices behing the Office_AirportExtreme?
    b) is this ideal config?
    c) is it typical to have different SSID?  would like to get to just single SSID for the apt, however not sure if there will be conflict i'm not aware of.
    Totally open to any suggestions on others that have done this before to avoid reinventing the wheel...
    See pic below... 
    Thx -Ray

    Note that after additional poking around and disabling Wi-Fi all together confirmed that when wired to either the ISP Router/AP or the Office_AE, i am able to see both NAS and WebCam behind the Office_AE. 
    The issue seems to be with the ISP Router/AP where by there is a difference in behavior when connected via Wi-Fi vs Wired.  All is well with the AirportExtreme from what i can gather.
    i'm just going to pickup a separate Wi-Fi access point to provide coverage for the LivingRoom area instead of trying to figure this out further.  
    FYI.  I am in Singapore using SingTel Fiber service and the ISP Router/AP i am using is Aztech DSL7000GRV(S)

  • Cant see all devices using airport utility

    why is it that when using windows xp and wired ethernet i can not see all apple devices using airport utility? If i switch to wireless i can see all of the devices just fine.

    To view Ethernet devices you need to use AirPort Utility 5.6. This can be installed using this method:
    http://frank.is/mountain-lion-and-the-old-airport-utility/
    Download the Automator workflow.

  • How can I check to see all devices ever linked to my iTunes account?

    I just had 2 older iPods stolen from my car overnight. I am trying to fill out a police report and need info on them. One was an original ipod with the click wheel (~2007 or so) and the second was an iPod Nano 4th Generation.
    I dont expect to get them back, just looking for more information.
    Thanks!

    If you registered your purchases you should be able to find records of them at https://supportprofile.apple.com/
    tt2

  • How to see all idevices on my ID.

    I would like to know on how many idevices is my ID signed in.And can they view my icloud backup with the fact that they do not know my apple ID password but its just signed into their devices..

    First, you can't "see" into an iCloud backup. The only way to determine what is in a backup is to restore it to a device.
    You can see all devices that are using Find My iDevice by logging into iCloud, clicking Find my iPhone and then the All Devices tab at the top of the screen.

  • HT201365 Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in

    Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in my pc...?

    Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

  • If I help out a friend & download a free app (through my iTunes account) on their new iPod Touch, will their device automatically be added to my itunes device list (and they can see all my contacts, pix, music etc)?

    If I help out a friend & download a free app (through my iTunes account) on their new iPod Touch, will their device automatically be added to my itunes device list (and they can see all my contacts, pix, music etc)?

    Just wondering, what context is this in?
    First up, is your iTunes account part of an iCloud account?
    Secondly, if it's a free app, why don't they just download it? If they are having trouble finding it on the App Store, but you can find it easily, you can share the link for it via email with them, and if they view that email on their iPod they can just tap the link and it will open the App Store to that App for them, so they can download it themselves.
    If you were to go to the Store settings pane and sign in with your iTunes account, that should only provide the possibility for download items from your iTunes account, such as purchased apps, music and movies. However, if you signed in, downloaded the app, and then went back and signed out of the account again, there shouldn't be any access apart from the app you downloaded. This is provided you sign in using the Store section of the Settings app, not the iCloud section.
    One problem they will have if you download this in your account instead of theirs, in order to download updates for that app, they will need you to enter your iTunes password to download the updates. Doing that doesn't give them access to anythign to do with your account other than that update, but they will be unable to receive updates for it without your password. They would also likely be unable to sync the app onto their computer, as their computer would not be Authorised with your iTunes account.
    If you can answer some of the questions I've asked, I may be able to suggest alternate ways for you get them the app on their device.
    Hope this all helps a bit

  • The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

    The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

    When you enable Photo Stream on your devices, only new photos you take or import to those devices will be automatically added to your Photo Stream. Existing photos won't.

  • I just updated my iphone to ios5 now when i go to music it says 'no content' when i checked my capacity it shows 7.9gb in 'other' . i can also see all my music is on the 'device' only when i go on the computer

    i just updated my iphone to ios5 now when i go to music it says 'no content' when i checked my capacity it shows 7.9gb in 'other' . i can also see all my music and apps on the device menue in itunes.

    I went to the Summary page of iTunes and checked "Sync only checked songs and videos".  Synced again, and no songs were playable.  Unchecked my only playlist and synced again.  All the songs were gone as expected.  Checked my playlist again, and all the songs were there.  Looked at them under the music tab, but they were all grayed out.  Tried to play any of them, but could not.  Tried to sync again and received the message, "The iPhone could not be synced because the sync session failed to start."
    Every time I connect my iPhone 4 to iTunes, it says "iTunes was interrupted while restoring the contents of the iPhone ____.  Would you like to restore this iPhone again now?"  I click "Continue Restore" (I'm tempted to click "delete backup.)  It then says, "An error occurred while restoring this iPhone (-54).  I click OK.  I'm redirected to the "Set up your iPhone screen".  It's already selected to "Restore from backup of ___'s iPhone".  Click continue.  It restores for about 2 minutes.  iTunes says my settings have been restored and wait for it to restart.  And again the message that "iTunes was interrupted..." (see above).  Crap.
    How do i get this back to where it belongs?

  • Hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???CAn anyone please help me out .... thanks

    hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???

    Hey wajahat86!
    Here is an article that describes this issue and can help you resolve it:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I have purchase some song on my macbook on my iphone and on my ipad but i cannot see them on all devices. Do i have to buy them again for each device?

    I have purchase some songs on my ipad but i cannot find them on my mac and on my iphone. Do i need to purchase them again for every device. I am using only one account on all devices.
    Thanks for helping me.

    Check the location of your iTunes library in the preferences, and navigate to that folder.  The contents will vary depending on how onld teh library is etc, but there should be a folder for applications.  If you do not see it, navigate to the App Store within iTunes and download a free app.   Then go look again.  Copy your old apps from the CD into this location.  You will need to ensure that whatever iTunes ID was used to purchase them originally is authorised in the new iTunes library.

  • How do I see all my devices on Icloud and add a phone?

    I have added 4 devices to my Icloud Account but I can only see 2.  Now we have lost one of the devices at an airport and I would like to track.
    But I cannot see the device in my account.

    You listed your product as an Android phone, is that the product in question? An Android phone cannot be tracked with Find my iPhone.

Maybe you are looking for

  • Error while duplicating a Database

    Hi, Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production OS:Solaris10. I am trying to create a replica of one of my Production DB for test envoirment... The steps I followed are.... sql>connect /as sysdba sql>alter system enab

  • Internal Server Error in PI 7.1

    Hi, We have recently moved from XI 3.0 to PI 7.1. We have built an IDoc to file scenario that is resulting in error with information as below: <SAP:Category>XIServer</SAP:Category>   <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>   <SAP:P

  • How do i create a PDF, or convert a jpeg to PDF for export?

    How do i create a PDF, or convert a jpeg to PDF for export?

  • How to parse a raw string that returns an XML file?

    Guys, Good day! I was assign to work on this but I did'nt know what to start. Please help me. The Problem is something like this: xml-file = pword(raw data string, token interpretation string) returns an XML file of: token type, token (value), positi

  • Business Connector 4.8 migration issue - missing options on home screen

    Hi Guys, I have migrated BC 4.7 to 4.8 I have used the transfer.zip etc to get the config settings etc The system is up...and appears to running... However we use an application called pocket manager So when I go to http: servername:5552\wpm\home.dsp