See Also popup menu not working
This had been posted before, but my situation is slightly
different.
I have 2 See Also text hyperlinks and one Releated Topics
text hyperlink on each topic in my online help.
All are set to dislay topics in a popup menu.
The help is being generated to HTML help.
Once generated, one of the See Also hyperlinks displays in a
Topic LIst Dialog instead of the popup menu.
The other See Also and the Related Topics hyperlinks are
dsiplayed with the popup menu.
I have checked the OPTIONS setting in the .HHP file and there
is no reference to Language.
I added one and it still does not solve the problem.
An older version of this source works fine.
Any ideas????
I have to deliver by Wenesday.
Thanks ---
Michael F Weart
LoanPerformance
Hi Michael
When you insert controls, if you look behind the scenes using
the TrueCode tab, you should see that RoboHelp HTML inserts two
distinctly different blocks of code. One is called a "design-time"
control and is displayed in green text. The other is the basic code
used by the HTML Help compiler. This section is displayed in gray
text. So you have two places to look for this setting. I'm only
referring to See Also controls here.
In the "green code" area should be a line that reads:
<param name="DialogDisplay" value="1" >
If the value is 1, the control produces a popup. If the value
is 0, you get a topics found dialog.
In the "gray code" area should be a line that reads:
<PARAM NAME="Command" VALUE="ALink,MENU">
If the value is Alink,MENU, the control produces a popup. If
the value is Alink, you get a topics found dialog.
Also, I just noticed you posted this identical question in
the RoboHelp for HTML Help forum category. Please don't cross post!
This is outlined in the forum guidelines you can read by
clicking
right here.
Sincerely... Rick
Similar Messages
-
I use the Dreamweaver to create a web page which have two
popup menus. When I run the page, it only the first popup menu is
come up. the second one never show up and give me an error
undefined is null or not an object.
Is anyone can help
Thank youPost a link to the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"aichau" <[email protected]> wrote in
message
news:geapsu$iav$[email protected]..
>I use the Dreamweaver to create a web page which have two
popup menus. When
>I
> run the page, it only the first popup menu is come up.
the second one
> never
> show up and give me an error undefined is null or not an
object.
> Is anyone can help
>
> Thank you
> -
Exceptions in popup blocking not work good
why sub-domains in exceptions in popup blocking not work? if i add a particular subdomain it works, but when i add an star in subdomain to do for all not work:
*.mihanblog.com
*.blogfa.com
//// Please add image upload on post feature to Firefox's support ////
//// Also add a suggestion forum to Firefox's support (like Chrome's forums) ////
ThanksDo not add a * because Firefox doesn't support wildcard that way.<br />
Just specify the domain to apply the exception to a domains and all sub domains.
*Bug 336207 - Add wildcards to cookie exceptions list to permit subdomains if all cookies are blocked -
Audition CS6 Help menu not working
I have downloaded Audition CS6. When I go to 'Help' i get error 10. Is there no help file with the trial?
Hi All,
I found this on the web and it works!
<http://forums.adobe.com/message/4417566#4417566> CS6 Help Menu Not Working
This does not apply to one application, but is a suite wide fix.
I had been running the CS6 Master Collection trial download version and the help menu, specifically the online "Help" and "Support Center" listed on the main help menu dropdowns of all applications within the suite, was not working, able to connect, or an error that the folder did not exist (apparently corrupted).
Once I just got the CS6 Master Collection (DVDs) I uninstalled the trials, then installed the hard copy version, with the normal reboot in between. The Help menus still did not work.
This is what I'm running. : Windows 7 Pro 64-bit
I called Adobe support and the following was my solution for both my desktop and netbook with this problem.
1. Close all running Adobe applications.
2. In the directory C:/Program Files (x86)/Adobe/ Delete the "Adobe Help" folder.
(C:Program Files (x86)/Adobe/Adobe Help/)
3. Reboot
4. Then go to Adobe.com/support/chc/ (this is the "community help center")
5. Click under "Step 2" the "Install Now*" button.
6. On one of the windows that open there is a Preferences drop down menu. Select the one that allows online help connection as well as local.
7. Click "download" to begin the folder download. The downloaded folders are more than 1 GB for the CS6 Master Suite help files. Watch at the bottom left of the download window to see the small progress meter.
8. Once done, reboot.
My CS6 Master Collection help menus throughout were fixed by completing the above.
Thanks Tom! ...at Adobe support for this fix procedure.
I hope this helps someone else out there.
This does not apply to one application, but is a suite wide fix. -
red dot glowing on proximity sensor of my iphone 4 and it is dead. it is not connecting with itunes. tried hard reset it's not working as well. also followed iphone troubleshooting assistant but also it's not working. what am i supposed to do now?
Make an appointment at the Genius Bar at your local Apple Store or take the phone into an Authorized Apple Service provider.
-
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?
but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?
You can't reset it. If you don't konw the password then you can't use that backup
-
IS_DIRTY dataloss popup is NOT working properly
Hi Folks,
Issue is not able to get * Data Loss Popup*
I am working with SAP NetWeaver 2004s, and created a webdynpro application using FPM.
I have implimented interfaces in my component: IF_FPM_UI_BUILDING_BLOCK & IF_FPM_WORK_PROTECTION and also used component IF_FPM_UI_BUILDING_BLOCK.
I can able to see the component controller methods: IS_DIRTY & NEEDS_CONFIRMATION
I wrote the logic inside these methods please check below:
Method: IS_DIRTY
IF changes are there
ev_dirty = 'X'.
endif.
Method: Needs_confirmation
CREATE OBJECT lo_confirm_request
EXPORTING
it_confirmation_text = lt_str.
eo_confirmation_request = lo_confirm_request.
eo_confirmation_request = cl_fpm_confirmation_request=>go_data_loss.
But I am not able to see data loss popup, but I can able to see my whole component showing as external window.
Please suggest me how can I will get dataloss popup in my webdynpro application.
Regards,
Naresh.Hi,
It would be nice if you share how you have solved your problem. May be someone will learn from it.
Thanks -
Button order and routing from PS menu not working
Ugh, this is driving me crazy.
When authoring a Blu-ray, I've gone through the same steps since I started but all of a sudden the menus I'm creating in PS CS5 for Encore CS5 are not working and for the life of me I can't figure out why.
The problem I'm having is that I set everything up in Photoshop then import the menu into Encore however when using the navigation of a remote, scrolling down skips some buttons and doesn't cycle through them normally.
For example, let's say I have eight buttons defined in a PSD.
1
2
3
4
5
6
7
8
When I preview or do a test burn, the highlight will stop on 1 and 2 but skip 3 and 5 and other random button definitions. And then when it gets to the last, it doesn't cycle back to the first.
I have everything set up correctly as far as I know - group layers prefaced with (+), highlight cursor prefaced with (=1), etc. And the order looks good in Encore.
Extremely frustrated, anyone else having this problem in CS5? I can up the PSD if anyone wants to check it out.
Thanks,
TomCan you post a screenshot of the menu with button routing on?
I second Stanley's request, and please Crop into that area, and also Save your JPEG, or PNG, with adequate resolution for people to see the numbers on your Button Routing. Also, if you have any specific desires for the order of your Button Routing, please define that.
Note that En will Automatically Route Buttons, based on their Layer Set Order in PS. If you have done some moving around of the order of Button Layer Sets, or have done some Copy/Duplicate, then what you think the order should be, but it might not be so. En will start at the bottom of the Layers Panel, and assign the identifier, Button 1 (regardless of what name you might have assigned), to the lowest Button, and working up, one Button Layer Set at a time, until it reaches the top. Can you also post a screen-cap of your Button Layer Sets (can be closed for a clear shot of the entire Palette), with the Layers Palette showing clearly, and the image with the Buttons showing near by? That could also be very helpful.
Good luck,
Hunt -
Spry Menu not working correctly
Hopefully this is the right part of the forum to post this question, if not, I apologize.
I have created a site in dreamweaver and am using a single Spry Menu Bar. I have read tons of forum postings about Drop down menus not working in IE, however, mine don't work in any browser or in the Live View either. I have a feeling it has something to do with either the div containing the menu bar or the sizing, but I can't tell. Please help.
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size:17px;
font-family:Tahoma, Geneva, sans-serif;
cursor: default;
width: 100%;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size:100%;
position: relative;
text-align: left;
cursor: pointer;
width:6.8em;
height:3.5em;
float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size:100%;
z-index: 1020;
cursor: default;
width: 8.2em;
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #CCC;
padding: 0.7em 0.5em;
color: #333;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #33C;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #33C;
color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
float: left;
background: #FFF;
Here is the code for the page
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<script language="javascript" type="text/javascript" src="http://www.onbile.com/websites/41ea989914d81eb7bd2e415141cd40fe"></script>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>GuitarFusion.com - Play. Learn. Make Music</title>
<link href="guitarfusionblogstyle.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<!--[if lt IE 7.]>
<script defer type="text/javascript" src="pngfix.js"></script>
<![endif]-->
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-15280994-2']);
_gaq.push(['_trackPageview']);
(function() {
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body onload="MM_preloadImages('images/homeOver.jpg','images/BioOver.jpg','images/LearnOver.jpg ','images/LessonsOver.jpg','images/ContactOver.jpg')">
<div id="wrapper">
<div id="header">
<div id="logo"></div>
<div id="social"><a href="http://www.facebook.com/pages/Guitarfusion/208575872514732"><img src="../images/facebook_32.png" width="32" height="32" alt="Facebook" border="0"/></a><a href="http://www.linkedin.com/in/sammills"><img src="../images/linkedin_32.png" width="32" height="32" alt="Linkedin" border="0" /></a><a href="http://www.myspace.com/lucid77"><img src="../images/myspace_32.png" width="32" height="32" alt="Myspace" border="0" /></a><a href="http://twitter.com/#!/guitarfusion"><img src="../images/twitter_32.png" width="32" height="32" alt="Twitter" border="0"></a><a href="http://www.guitarfusion.com/blog"><img src="../images/wordpress_32.png" width="32" height="32" alt="Wordpress" border="0"/></a><a href="http://www.youtube.com/guitarfusiondotcom"><img src="../images/youtube_32.png" width="32" height="32" alt="Youtube" border="0" /></a></div>
<!-- Old Nav
<div id="nav"><a href="index.php" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Home','','images/homeOver.jpg',1)"><img src="images/home.jpg" alt="Home" name="Home" width="97" height="45" border="0" id="Home" /></a><a href="biography.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Bio','','images/BioOver.jpg',1)"><img src="images/Bio.jpg" alt="Biography" name="Bio" width="97" height="45" border="0" id="Bio" /></a><a href="learn.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Learn','','images/LearnOver.jpg',1)"><img src="images/Learn.jpg" alt="Learn Online" name="Learn" width="97" height="45" border="0" id="Learn" /></a> <a href="lessons.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Lessons','','images/LessonsOver.jpg',1)"><img src="images/Lessons.jpg" alt="Lessons" name="Lessons" width="109" height="45" border="0" id="Lessons" /></a> <a href="contact.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Contact','','images/ContactOver.jpg',1)"><img src="images/Contact.jpg" alt="Contact" name="Contact" width="126" height="45" border="0" id="Contact" /></a></div>
End Old Nav -->
<div id="navdropdown">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="#">Home</a> </li>
<li><a href="#" class="MenuBarItemSubmenu">About Me</a>
<ul>
<li><a href="#" title="A little about myself.">Biography</a></li>
<li><a href="#">Cirriculum Vitae</a></li>
<li><a href="#" title="See me play or teach.">Mp3 & Videos</a></li>
<li><a href="#" title="Where am I am playing?">Performances</a></li>
<li><a href="#" title="Want me to play your event or party?">Booking</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="#">Lessons</a>
<ul>
<li><a href="#" title="What will you learn?">Syllabus</a> </li>
<li><a href="#" title="How much does this cost?">Pricing</a></li>
<li><a href="#" title="Where do lessons take place?">Locations</a></li>
<li><a href="#" title="What books and supplies will you need?"> Books & Supplies</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Learn Online</a>
<ul>
<li><a href="#">Guitar</a></li>
<li><a href="#">Bass</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Contact</a>
<ul>
<li><a href="#">Email </a></li>
<li><a href="#" title="Facebook, Twitter, Etc..">Social Media</a></li>
</ul>
</li>
</ul>
</div>
</div>
<div id="content">
<div id="blog_header"></div>
<div id="sidebar">
<form method=post action="http://poll.pollcode.com/Vp1c"><table border=0 width=150 bgcolor="#ffffff" cellspacing=0 cellpadding=2><tr><td colspan=2><font face="Verdana" size=-1 color="teal"><center><b>Most useful video lesson topics:</b></center></font></td></tr><tr><td width=5><input type=radio name=answer value="1"></td><td><font face="Verdana" size=-1 color="000000">Open Chords</font></td></tr><tr><td width=5><input type=radio name=answer value="2"></td><td><font face="Verdana" size=-1 color="000000">Barre Chords</font></td></tr><tr><td width=5><input type=radio name=answer value="3"></td><td><font face="Verdana" size=-1 color="000000">Scales</font></td></tr><tr><td width=5><input type=radio name=answer value="4"></td><td><font face="Verdana" size=-1 color="000000">Arpeggios</font></td></tr><tr><td width=5><input type=radio name=answer value="5"></td><td><font face="Verdana" size=-1 color="000000">Music Reading</font></td></tr><tr><td width=5><input type=radio name=answer value="6"></td><td><font face="Verdana" size=-1 color="000000">Picking Technique</font></td></tr><tr><td width=5><input type=radio name=answer value="7"></td><td><font face="Verdana" size=-1 color="000000">Strumming Patterns</font></td></tr><tr><td width=5><input type=radio name=answer value="8"></td><td><font face="Verdana" size=-1 color="000000">Tab Reading</font></td></tr><tr><td width=5><input type=radio name=answer value="9"></td><td><font face="Verdana" size=-1 color="000000">Songwriting</font></td></tr><tr><td width=5><input type=radio name=answer value="10"></td><td><font face="Verdana" size=-1 color="000000">Improvisation</font></td></tr><tr><td width=5><input type=radio name=answer value="11"></td><td><font face="Verdana" size=-1 color="000000">Triads</font></td></tr><tr><td colspan=2><center><input type=submit value="Vote"> <input type=submit name=view value="View"></center></td></tr><tr><td bgcolor="white" colspan=2 align=right><font face="Verdana" size=-2 color="black">pollcode.com <a href=http://pollcode.com/><font color="navy">free polls</font></a></font></td></tr></table></form><a href="./studies.html">
<img src="images/studies.jpg" border="0" /></a><br/><br/>
<script src="http://widgets.twimg.com/j/2/widget.js"></script>
<script>
new TWTR.Widget({
version: 2,
type: 'profile',
rpp: 4,
interval: 6000,
width: 'auto',
height: 200,
theme: {
shell: {
background: '#aee5f5',
color: '#4b508f'
tweets: {
background: '#dbdbdb',
color: '#333333',
links: '#336699'
features: {
scrollbar: true,
loop: false,
live: false,
hashtags: true,
timestamp: true,
avatars: false,
behavior: 'all'
}).render().setUser('guitarfusion').start();
</script></font><br/>
<div id="fb-root"></div><script src="http://connect.facebook.net/en_US/all.js#xfbml=1"></script><fb:like-box href="http://www.facebook.com/pages/Guitarfusion/208575872514732" width="200" show_faces="true" border_color="" stream="true" header="true"></fb:like-box>
</div>
<div id="blog">
<?php
/* Short and sweet */
define('WP_USE_THEMES', false);
require('./blog/wp-blog-header.php');
?>
<?php
require('./blog/wp-blog-header.php');
?>
<?php
$posts = get_posts('numberposts=10&order=ASC&orderby=post_title');
foreach ($posts as $post) : start_wp(); ?>
<?php the_date(); echo "<br />"; ?>
<h2><?php the_title(); ?> </h2>
<?php the_content() ?>
<a class="bloglink" href="<?php the_permalink() ?>">
Read more...</a><br />
<?php
endforeach;
?>
</div>
<div id="ad_middle"></div>
<div id="blog_bottom2">
<h1> Free Stuff</h1>
<br/>
<ul>
<li><a href="http://www.metronomeonline" target="_new">Online Metronome</a> - Metronomes are a great tool to use during practice to keep a steady tempo and to help increase speed of passages. Use this online metronome if you do not already have a stand alone metronome.</li><br/>
<li><a href="http://itunes.apple.com/us/app/id347846503">Iphone / Itouch Metronome</a> - This is an example of several free metronome apps that are available for your phone. Android users can also find free metronomes on the Marketplace. Be sure and read the ratings, some are better at keeping time than others.</li><br/>
<li><a href="https://market.android.com/details?id=com.pedrocorp.android.guitar&feature=search_result">Android Phone Metronome / Tuner / Chord Dictionary</a>This handy little app will not only provide you with a tuner, but has a built-in metronome and chord dictionary. - </li><br/>
<li><a href="http://tuxguitar.herac.com.ar/" target="_new">Free Guitar Tab Editor</a> - View / Create Tab - Free alternative to GuitarPro Software. Use this software to open .gp3, .gp4, .gp5 files and search for music online.</li><br/>
<li><a href="http://www.blanksheetmusic.net/">Free Blank Sheet Music</a> - Print blank sheet music. Choose from standard notation, treble, bass, alto clefs, and tablature. </li><br/>
<li><a href="http://www.911tabs.com/">Free Tablature Search Engine</a> - This is a great search engine to find tabs. I mainly use this to find .gp5 files for my Tux Guitar Software. </li>
</ul>
</div>
<div id="blog_bottom"><span style="float:left;">
<img src="images/mapad.jpg" /></span>
<iframe width="425" height="350" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="http://maps.google.com/maps?q=1060+West+State+Road+434,+Longwood,+FL&sll=28.697815,-81.364 128&hl=en&sspn=0.006295,0.006295&ie=UTF8&hq=&hnear=1060+Florida+434,+Longwood,+Florida+327 50&ll=28.70572,-81.364145&spn=0.026349,0.036478&z=14&iwloc=A&output=embed"></iframe><br /><small><a href="http://maps.google.com/maps?q=1060+West+State+Road+434,+Longwood,+FL&sll=28.697815,-81.364 128&hl=en&sspn=0.006295,0.006295&ie=UTF8&hq=&hnear=1060+Florida+434,+Longwood,+Florida+327 50&ll=28.70572,-81.364145&spn=0.026349,0.036478&z=14&iwloc=A&source=embed" style="color:#0000FF;text-align:right">View Larger Map</a></small>
</div>
</div>
<div id="footer">
<ul>
<li><a href="../index.html">Home</a></li>
<li><a href="../biography.html">Biography</a></li>
<li><a href="../learn.html">Learn Guitar</a></li>
<li><a href="../Lessons.html">Guitar Lessons</a></li>
<li><a href="../contact.html">Schedule Lessons</a></li>
<li><a href="mailto:[email protected]">Contact Webmaster</a></li>
</ul>
© 2006-2011 Guitarfusion.com All Rights Reserved. Unauthorized Use Prohibited.
</div>
</div>
</body>
</html>
And here is the code for the index.php's css
body {
background-color: #ff9933;
font-family:Verdana, Geneva, sans-serif;
font-size:11px;
p {
text-align:center;
text-indent:15px;
#wrapper {
width:960px;
height:100%;
margin-left:30px;
position:absolute;
#header {
width:960px;
height:310px;
background-image: url(images/gfheader.gif);
background-position:center;
background-repeat:no-repeat;
position:relative;
z-index:0;
#logo {
height:242px;
width:235px;
background-image:url(images/GuitarFusionLogo.gif);
position:relative;
top:40px;
left:80px;
z-index:1;
visibility:hidden;
#nav {
width:600px;
height:45px;
z-index:2;
position:relative;
top:12px;
left:290px;
visibility:hidden;
#navdropdown {
background-color:#999;
width:600px;
height:45px;
z-index:3;
position:relative;
top:12px;
left:290px;
#content {
width:840px;
height:1800px;
background-color:#fff;
position:relative;
margin-left:60px;
#social {
width:195px;
height:32px;
border:none;
position:relative;
text-align:right;
bottom:25px;
right:65px;
float:right;
z-index:3;
visibility:hidden;
.social {
margin-left:50px;
#blog {
width:600px;
height:500px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
float:left;
z-index:1;
overflow:auto;
background-color:#d6e8f7;
#blog_header {
width:625px;
height:45px;
background-Image:url(images/blogheader.gif);
position:relative;
top:20px;
left:5px;
z-index:2;
float:left;
.nav {
margin-left:20px;
#sidebar {
width:200px;
height:1500px;
border:none;
left:-10px;
top:10px;
position:relative;
float:right;
#ad_middle {
width:600px;
height:200px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
z-index:1;
overflow:auto;
float:left;
background-color:#EFF5E9;
background-image:url(images/lessonsad.jpg);
background-repeat:no-repeat;
background-position:center;
#blog_bottom {
width:600px;
height:370px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
z-index:1;
overflow:auto;
float:left;
background-color:#F6F6F6;
#contentwrapper {
width:650px;
height:500px;
position:relative;
top:50px;
float:left;
margin-left:95px;
#header_content {
width:624px;
height:43px;
background-image:url(images/Header.gif);
text-align:center;
font-size:28px;
font-family:"Palatino Linotype", "Book Antiqua", Palatino, serif;
line-height:40px;
color:#FFF;
position:relative;
left:10px;
#bio_content {
width:600px;
height:1000px;
.biopic {
float:left;}
#learn_content {
width:600px;
height:100%;
#faq {
width:700px;
height:600px;
background-color:#f8f8f8;
border:thin solid #000;
margin-left:60px;
#books {
width:750px;
height:700px;
position:relative;
float:left;
margin-left:35px;
fieldset {
margin: 1em 0;
padding: 1em;
border : 1px solid #ccc;
background: #f8f8f8;
legend {
font-weight: bold;
#form_content {
position:relative;
left:160px;
height:880px;
width:500px;
text-align:center;
background-color:#E7EFFF;
border:double #900;
form div {
background-color:#f8f8f8;
padding:0px;
margin:0px;
#footer {
width:960px;
height:40px;
bottom:0px;
position:relative;
text-align:center;
line-height:1px;
font-size:10px;
padding-bottom:10px;
#footer ul li {
display:inline;
margin:20px;
#footer ul li a {
text-decoration:none;}
#blog_bottom2 {
width:600px;
height:370px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
z-index:1;
overflow:auto;
float:left;
background-color:#F6F6F6;
text-align:center;
#studies{
width:600px;
height:800px;
position:relative;
margin-left:110px;
text-align:center;
background:#f8f8f8;
#blog_bottom2 ul li
{list-style-type:none
Any help is appreciated.You do not have a constructor for the menu bar as in
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
There are too many mistakes in the JS outside of the Spry Menu Bar. Have a look at the following which includes all errors, not just the JS
Validation Output: 117 Errors
Line 21, Column 38: character "&" is the first character of a delimiter but occurred as data var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 21, Column 40: cannot generate system identifier for general entity "i" … var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=… ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 21, Column 40: general entity "i" not defined and no default entity … var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 41: reference not terminated by REFC delimiter …var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 21, Column 41: reference to entity "i" for which no system identifier could be generated …var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 39: entity was defined here var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=…
Line 21, Column 50: character "&" not allowed in attribute specification list …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
Line 21, Column 50: element "a.length" undefined …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 21, Column 51: character "&" is the first character of a delimiter but occurred as data …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 21, Column 60: character "&" is the first character of a delimiter but occurred as data …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 21, Column 62: cannot generate system identifier for general entity "x.oSrc" …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 21, Column 62: general entity "x.oSrc" not defined and no default entity …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 68: reference to entity "x.oSrc" for which no system identifier could be generated …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 61: entity was defined here …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
Line 29, Column 76: character ";" not allowed in attribute specification list … var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) ✉
Line 29, Column 76: element "a.length" undefined … var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 41, Column 57: character "&" is the first character of a delimiter but occurred as data …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 41, Column 59: cannot generate system identifier for general entity "parent.frames.length" …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 41, Column 59: general entity "parent.frames.length" not defined and no default entity …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 41, Column 79: reference not terminated by REFC delimiter …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 41, Column 79: reference to entity "parent.frames.length" for which no system identifier could be generated …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 41, Column 58: entity was defined here …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
Line 45, Column 15: character "&" is the first character of a delimiter but occurred as data if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 45, Column 17: cannot generate system identifier for general entity "d.all" if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 45, Column 17: general entity "d.all" not defined and no default entity if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 45, Column 22: reference not terminated by REFC delimiter if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 45, Column 22: reference to entity "d.all" for which no system identifier could be generated if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 45, Column 16: entity was defined here if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms…
Line 45, Column 47: character "&" is the first character of a delimiter but occurred as data …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 45, Column 50: reference not terminated by REFC delimiter …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 45, Column 50: reference to entity "i" for which no system identifier could be generated …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 39: entity was defined here var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=…
Line 45, Column 65: character ";" not allowed in attribute specification list …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
Line 45, Column 65: element "d.forms.length" undefined …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 47, Column 13: character "&" is the first character of a delimiter but occurred as data for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 47, Column 15: cannot generate system identifier for general entity "d.layers" for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 47, Column 15: general entity "d.layers" not defined and no default entity for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 47, Column 23: reference not terminated by REFC delimiter for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 47, Column 23: reference to entity "d.layers" for which no system identifier could be generated for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 47, Column 14: entity was defined here for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum…
Line 47, Column 23: character "&" is the first character of a delimiter but occurred as data for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 47, Column 26: reference not terminated by REFC delimiter for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 47, Column 26: reference to entity "i" for which no system identifier could be generated for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 39: entity was defined here var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=…
Line 47, Column 42: character ";" not allowed in attribute specification list …or(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].documen… ✉
Line 47, Column 42: element "d.layers.length" undefined …or(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].documen… ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 49, Column 9: character "&" is the first character of a delimiter but occurred as data if(!x && d.getElementById) x=d.getElementById(n); return x; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 49, Column 10: character "&" is the first character of a delimiter but occurred as data if(!x && d.getElementById) x=d.getElementById(n); return x; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 59, Column 76: character "<" is the first character of a delimiter but occurred as data …=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3) ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 65, Column 9: end tag for "d.layers.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 47, Column 26: start tag was here for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum…
Line 65, Column 9: end tag for "d.forms.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 45, Column 50: start tag was here …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
Line 65, Column 9: end tag for "a.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 29, Column 67: start tag was here … var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
Line 65, Column 9: end tag for "a.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 21, Column 41: start tag was here …var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x…
Line 121, Column 579: end tag for "img" omitted, but OMITTAG NO was specified …ight="32" alt="Twitter" border="0"></a><a href="http://www.guitarfusion.com/bl… ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 121, Column 492: start tag was here …="http://twitter.com/#!/guitarfusion"><img src="../images/twitter_32.png" widt…
Line 225, Column 14: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified <form method=post action="http://poll.pollcode.com/Vp1c"><table border=0 width=… ✉
Line 225, Column 72: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …poll.pollcode.com/Vp1c"><table border=0 width=150 bgcolor="#ffffff" cellspacin… ✉
Line 225, Column 80: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …lcode.com/Vp1c"><table border=0 width=150 bgcolor="#ffffff" cellspacing=0 cell… ✉
Line 225, Column 114: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …dth=150 bgcolor="#ffffff" cellspacing=0 cellpadding=2><tr><td colspan=2><font … ✉
Line 225, Column 128: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …r="#ffffff" cellspacing=0 cellpadding=2><tr><td colspan=2><font face="Verdana"… ✉
Line 225, Column 146: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …acing=0 cellpadding=2><tr><td colspan=2><font face="Verdana" size=-1 color="te… ✉
Line 225, Column 174: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …d colspan=2><font face="Verdana" size=-1 color="teal"><center><b>Most useful v… ✉
Line 225, Column 197: document type does not allow element "center" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag …"Verdana" size=-1 color="teal"><center><b>Most useful video lesson topics:</b>… ✉
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 225, Column 277: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …center></font></td></tr><tr><td width=5><input type=radio name=answer value="1… ✉
Line 225, Column 291: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …</td></tr><tr><td width=5><input type=radio name=answer value="1"></td><td><fo… ✉
Line 225, Column 302: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …tr><td width=5><input type=radio name=answer value="1"></td><td><font face="Ve… ✉
Line 225, Column 323: end tag for "input" omitted, but OMITTAG NO was specified … type=radio name=answer value="1"></td><td> -
Hello good samaritans.. I need help.. The jump menu in my web
page is not working.
I already tried inserting a Go button but it still didnt
work. I have a website and I
created a template, in this template I created dummy jumpmenu
first just to see
how it looks like then after creating a whole bunch of pages
from the template I decided
to connect all the webpages by fixing the jump menu. But now
its not working!!!
What I did is that in the 'when selected, go to url:' window
I just browse the web pagefile then click ok but when I try
to run it in the
internet it's not working.
Also, just for your info, I Haven;t publish it yet. Will be
the reason why?
I just kept all my files on my c drive.
Thanks a lot!!Let me be clear -
What is the path to the local root folder.
Open DW's Site manager. Select the sitename. Click Edit.
Click on the
Advanced tab. Copy the contents of the Local root folder
field and paste it
into a reply.
Now - don't make me ask you this again, or it's no supper for
you, young
man/lady!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"teamse" <[email protected]> wrote in
message
news:ebg9ss$pqd$[email protected]..
> Thanks Gary for replying. Can you explain it a little bt
mrore I don't
> understand it completely..=) Yes after I finish the
website we will then
> publish it on a server but for now I haven''t publish it
so it still
> sitting on
> my c:drive. when you say get rid of the blanks in file?
what do you mean,
> is it
> when typing the ffile address in dw? because when I
browse it and click
> the
> file dw automatically create a link like this"../BMB
Webpages/Boulder
> Webpages/B_ConferenceRooms.html"
> and it doesnt have any balanks but it still not working
' or you mean to
> say
> when saving a webpage to my c drive? thanks
> -
I'm working through the Apple Pro Series DVDSP 3 and the lesson requires me to create a layered menu. The picture in the book shows how the rollover is supposed to work--a new image appears when the user rolls over the button. But that doesn't happen. It doesn't even work in the file created by the author. Very frustrating. I've tried restarting DVDSP and that doesn't work. Can anyone help? I'm wondering if my using files from DVDSP 3 is the problem. Shouldn't be since they're just updated automatically I think.
Take a look here
http://dvdstepbystep.com/layersover.php
Another example on how to do it and also a movie and downloads (DVD SP and Photoshop file) on how to do it
Not sure what may be going on with what you are using - when you say it is not working, in siumlator, in a build file in Apple DVD Player or a burned DVD? (See if the above link and items works) -
I'm frustrated. In the menu, under Properties/Motion tab, I select the video that I want to set up as my motion menu and it's not working. All I see is a static image of the video clip. The audio works but not the video clip set for motion. Please help.
But what I remembered is using part of a clip in Encore and I had a hell of a job to, anyway, unsuccessfully work the sound out ok. This is when I made the exact clip I needed in PP and imported it in Encore. Then I set the loop for ever. This way you can have this clip playing till someone chose what to wathch. I guess it's nice to have some movie starting automatically when there are not to many choices from them.
When doing both a Motion Menu and also adding Audio to it, you will probably be best served to Export these as elemental streams from PrPro, and Import those into Encore.
I will create a new Sequence in the Project, and create the Video part to the intended Duration for the Motion Menu. Same for my Audio, and often do this in yet another Sequence. I will chose Audio source files with quite a bit of repetition during the Duration, and a fade-in/fade-out to it. I've marked a half-dozen SmartSound pieces, that work very well for this.
The Video is Exported as DV-AVI Type II, with NO Audio, and multiplexing is turned off.
The Audio is Exported as either PCM/WAV 48KHz 16-bit, or AC3 DD 5.1 SS through the SurCode encoder (plug-in that costs ~US$250) for Surround Sound, NO Video and no multiplexing, obviously.
Doing it this way solves a lot of potential problems. Muxed files can cause issues with En, though not always.
One caveat that I learned the hard way - if you have Audio on your Menu and also Button Transitions with Audio, you will want the Audio for each to match perfectly in format and CODEC. Otherwise you will probably loose the Audio in one, or the other. Last caveat - stay as far away from MP3's as you can. Some work, some just do not and the quality will already have suffered greatly. I only use these for some of my SFX in PrPro and never, never for anything else.
Good luck and don't forget to Render those Motion Menus... [Grin]
Hunt -
JavaScript popup code not working 4 me
Hi,
I am to trying to open pop windows in Flash through
JavaScript. Now I found a number of ways to do this on the forums
but none is working for me. When I click the swf button containing
the pop code (embedded in html), nothing happens. I do not have pop
windows blocked, and when I click the button in stand alone swf
file (i.e. not embedded in html), I receive the following error
message:
Macromedia flash player has stopped a potentially dangerous
operation. The following application on your computer or network
<name of file>
is trying to communicate with this internet-enabled location
<unknown>
To let this application communicate with the internet, click
settings.
/********** FIRST CODE ****************/
The first was from kirupa.com. The code on the button is:
on (release) {
//customize the window that gets opened
// 0 equals NO.
// 1 equals YES.
address = "
http://www.google.com";
target_winName = "google";
width = 400;
height = 300;
toolbar = 0;
location = 0;
directories = 0;
status = 0;
menubar = 0;
scrollbars = 1;
resizable = 0;
//sends data back to the function
_root.openWinCentre(address, target_winName, width, height,
toolbar, location, directories, status, menubar, scrollbars,
resizable);
The code on the root timeline is:
_root.openWinCentre = function (url, winName, w, h, toolbar,
location, directories, status, menubar, scrollbars, resizable) {
getURL ("javascript:var myWin; if(!myWin ||
myWin.closed){myWin = window.open('" + url + "','" + winName +
"','" + "width=" + w + ",height=" + h + ",toolbar=" + toolbar +
",location=" + location + ",directories=" + directories +
",status=" + status + ",menubar=" + menubar + ",scrollbars=" +
scrollbars + ",resizable=" + resizable +
",top='+((screen.height/2)-(" + h/2 +
"))+',left='+((screen.width/2)-(" + w/2 + "))+'" +
"')}else{myWin.focus();};void(0);");
/********** SECOND CODE **************/
The code on the button is:
btn.onRelease = function()
getURL("javascript:window.open('
http://www.google.com','newWin','width=300,height=200,left=0,top=0,toolbar=No,location=No, scrollbars=No,status=No,resizable=No,fullscreen=No')");
Nothing on the root timeline.
Anyone got a clue what’s happening? I was wondering
whether there was problem with settings on my computer? Also, I do
not want to embed JavaScript code in the HTML file.
Many thanks,
EssaeyuWhat I want to achieve is something very basic, done n times
on the web, but its strange that its not working on my machine. I
am getting popups through getURL function and on HTML links but not
from swf/javascript links. This includes linking both to the
webpages on the internet e.g. google and pages on my machine. I
have tried three different ways of achieving this and am attaching
thecode. Can someone look at the files please and see what’s
wrong/spot something I overlooked? I will be extremely grateful.
Here is the code in the fla's (and html in one case). No
facility to attach files else i would have done so. Though the
flas/swf/html files can be downloaded from:
http://www.actionscript.org/forums/showthread.php3?p=623694#post623694.
These are three zip files posted by user essaeyu today.
Many thanks,
Essaeyu
/*************** Code in the first file ****************/
The code on the button is:
btn.onRelease = function()
getURL("javascript:window.open('
http://www.google.com','newWin','width=300,height=200,lef
t=0,top=0,toolbar=No,location=No,scrollbars=No,sta
tus=No,resizable=No,fullscreen=No')");
Nothing on the root timeline.
/*************** Code in the second file ****************/
/*Taken from kirupa.com*/
The code on the button is:
on (release) {
//customize the window that gets opened
// 0 equals NO.
// 1 equals YES.
address = "
http://www.google.com";
target_winName = "google";
width = 400;
height = 300;
toolbar = 0;
location = 0;
directories = 0;
status = 0;
menubar = 0;
scrollbars = 1;
resizable = 0;
//sends data back to the function
_root.openWinCentre(address, target_winName, width, height,
toolbar, location, directories, status, menubar, scrollbars,
resizable);
The code on the root timeline is:
_root.openWinCentre = function (url, winName, w, h, toolbar,
location, directories, status, menubar, scrollbars, resizable) {
getURL ("javascript:var myWin; if(!myWin ||
myWin.closed){myWin = window.open('" + url + "','" + winName +
"','" + "width=" + w + ",height=" + h + ",toolbar=" + toolbar +
",location=" + location + ",directories=" + directories +
",status=" + status + ",menubar=" + menubar + ",scrollbars=" +
scrollbars + ",resizable=" + resizable +
",top='+((screen.height/2)-(" + h/2 +
"))+',left='+((screen.width/2)-(" + w/2 + "))+'" +
"')}else{myWin.focus();};void(0);");
/*************** Code in the third file ****************/
Code in the html header
<script language="JavaScript">
<!--
function spawnWindow(URL , u_name)
var my_vin;
my_vin = window.open(URL , u_name);
//-->
</script>
Script in flash root timeline:
btn.onRelease = function()
getURL ("javascript:spawnWindow('
http://www.google.com','newwin')");
} -
Hi, even after installing KB3034229 my start menu is gone, search does not work so I don't have any good way to start applications. I am worried because they say update fixes this error, but not for me :-(
Most of my settings are also gone. I cannot revert back (getting error about moved account, but I did not move my account location after installing technical preview)
Any help is much appreciated. Thank you!Actually, I decided to take a look around in the Event Viewer and saw that there were errors in the "Application" section under windows logs, with the message stating "Activation of app (Insert app name here with a bunch of characters after
it) failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational log for additional information." And a more specific error to do with ShellExperienceHost.exe http://pastebin.com/c62Fm8xz
. (Cant figure out how to change the font back, so ill stick with this one) All the errors in the Application tab in windows logs that are "Application Errors" all come from the faulting module "Windows.UI.Xaml.dll" After trying to open
the start menu, an Application error (http://pastebin.com/WVktd0Ti) (Suddenly the font fixed itself, okay.) appeared. This is all on build 10041. The logs in "Microsoft-Windows-TWinUI/Operational" all contain something along the lines of this
"Activation of the app Microsoft.Cortana_8wekyb3d8bbwe!CortanaUI for the Windows.Launch contract failed with error: The remote procedure call failed.."
Hopefully this contains useful information to help fix this bug.
EDIT:
After looking up the error code from the log in "Microsoft-Windows-TWinUI/Operational" (https://support.microsoft.com/en-us/kb/2798317/) It seems to be a permissions issue maybe? I'll update this if I find a solution.
Maybe you are looking for
-
Fast Refresh mview performance
Hi, I'm actually facing with Fast Refresh Mview performace problems and i would like to know what is the possible improvments for the fast refresh procedure: - base table is 1 500 000 000 rows partitions by day , subparttion by has (4) - mlog partiti
-
NEW THINKPAD OWNER SEEKING HELP
Hello everyone- I am a new ThinkPad owner. I purchased a used T40 recently and love it. I installed Windows7 on it (it came with W7, but I wiped the hard drive clean and re-installed). I do have a few issues I was hoping to get some help on. Nothing
-
How can we resend AS2 MDN messages back to TP when initial try failed.
Hi, We would like to auto retry a failed AS MDN messages back to our TP. We are connected with AS2 and at the channel level we set the retry interval and retry count, but it seems still the MDN is not retried automatically when initial try failed for
-
Hi experts, Could anyone please let me know that in case of reporting point backflushing how i can set reporting points What are the diff. reporting point types? What are the mandatory config. settings required for that? thnx in advnce
-
I really need help y'all cause I'm getting frustrateD!