See burger EDI adapter (X12) functionalities

Hi All,
We are a consumer products company and have See burger EDI adapter (X12) implemented in XI IE. Could anyone tell me about the standard software components and mapping which comes along with the see burger adapter components, and how to customize it for our shipment from suppliers business cases.
Appreciate any help.
Thanks,
Deno

Hi Deno Abraham,
This might help you
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
Thanks & Regards
Agasthuri Doss

Similar Messages

Use of see burger adapter replacing with File (FTP) adapter

Hi All,
My current scenario is file to proxy and want to replace file adapter with the see burger adapter.
Can any one expalin step by step procedure(after installation of see burger adapter in SDM) using sender see burger adapter with the port details?
For this do we need to write any adapter modules in integration directory?
Also pls give me clarification on 850 and 997 messages?
Regards,
Nani.

Hi,
Deploy the standard seeburger mapping provided by see burger on XI .Then you need to call that mapping in the adapter module which does the conversion from EDI to XML and XML to EDI. You need to call the BIC module in the communication channel configuration and configure the module parameters like
bic- destSourceMsg = MainDocument
bic- destTargetMsg = MainDocument
bic- mappingName-something like ....See_E2X_ANSIX12_850_V4010
Once if you are able to convert the edifile to xml, then the remaining proxy configuration will be same as just for normal scenarios.
>>For this do we need to write any adapter modules in integration directory
You can use the standard BIC module or you can very well write your own adapter module to convert EDI to xml and configure it in the communication channel.
>>>Also pls give me clarification on 850 and 997 messages
850 is purchaseorder EDI document and 997 is the functional acknowledgement
The links provided by Luis will really help you in understanding the basics. Also go through the below links
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
Regarding EDI
Seeburger BIC Help!!
Regards,
Priyanka

SEE BURGER FTP & AS2 configurations

Hi,
Can anyone please send me hte configuration parameters of the SEE BURGER FTP & AS2 adapters both for sender and receiver communication channels.
I already have the config details of the Module processor.
Thanks in Advance

Hi
Please find here with the reply
Seeburger Adapter
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Thoughts on EDI in an SAP XI Environment
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Thanks
Swarup

XSD for EDI 850 ( X12 standard )

Hi Everybody,
can you please provide XSD for EDI 850 ( X12 standard )? i need to import this XSD as an external definition in to IR.
Please help me in this.
Thanks,
Vijay Kumar T.

Hi Vijay,
If you want to exchange EDI 850 messages means you have to use Seeburger Adapter for your business requirement.
Or else you can go for Conversion Agent for the similar type of requirement.
Assume that you are going with the Seeburger Adapter means, you have to get the seeburger Package and install it on Xi Server as pethe Installation giude.
Once you install the Seeburger on Xi server means you are able to see the SWCV of seeburger in IR.There you can see the Required XSD's Under External Definitions of the Seeburger SWCV.
Copy that & Import it as a External Def in your Scenario.
Until and unless you install the seeburger adapter on Xi server, you cant get the XSD for EDI 850 or 855 or 860.....
First of all can you please share your business requirement. so that our guys can help you regarding this.
Regards
Seshagiri

EDI Adapter

I have a few questions.
1. What is EDI.
I have found this through the search :P
2. Which EDI adapters are supported bij SAP? I mean, which adapters SAP netweaver will work with?
Edited by: J. Ramsaransing on Jun 3, 2008 3:27 PM

Hi,
Main EDI Adapter for netweaver is SEEBURGER AS2 Adapter.
Brief about seeburger:
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Seeburger provide following functionality.
1) It has std XSD available which we just need to import into External definition
2) It has std mappings for all the message type which converts EDI to XML and XML to EDI format.
3) Provides different adaters
4) BIC tool
5) Many adapter modules.
For implementing seeburger you need to follow the below steps:
1) First deploy the Std seeburger mapping provided by see burger on XI
2) If you are using the AS2 adapter then you have to install the AS2 server on XI server.
3) Once you install the std seeburger on SAP XI server you will see the AS2,X400,OFTPS,VAN adapter on XI ID.
5) You need to call the std mapping in the adapter module which does the conversion from EDI to XML and XML to EDI.
Flow of the data from EDi to SAp r/3 using seeburger:
1) Data will be coming thorugh WAN or mailbox.
2) If its coming through WAN then every WAN provider will give the partner which is sending the data a partner number for indentification.
3) In your AS2 channel you need to configure the party and for that party you need to give the WAN number which is proivded for that partner. So it will run that configuration whenever that partner send the data.
4) In the adapter you have to give the mapping program name which does the conversion of EDI-XML and XML-EDI.
5) Once you XML is generated then it will be used in MM
6) At the receiver if its IDOC adapter then IDOC adapter will post the IDOC to R3 system.
Refer this forum which is replied by me which talk about the configuration which need to be done for AS2 adapter. This is very helpful:
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Re: Seeburger AS2 adapter...
Re: AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??
AS2 adpater-- Configuration details for both SND and RCV.
AS2 Sender Adapter -- Need few details.
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Hav a look into this link for information
http://www.seeburger.com/sap-adapter-upgrade/
Refer these- Re: Seeburger Adapter details
SEEBURGER adapter - How much does it help?
Regards
Aashish Sinha
PS : reward points if helpful

Steps to Process standard EDI ANSI X12 997 file from AS2 Server

Hi All,
I have a scenario where we are receiving PO files from an EDI third party via AS2 adapter.
In return, we are sending PO Acknowledgement and Invoice files to the third party via AS2 adapter.
The fomat of the incoming and outgoing files are ANSI X12 (850 for PO, 855 for PO Ack and 810 for Invoices).
Currently client has informed that they are going to send an EDI ANSI X12 997 (Functional Ack) file for each PO Ack or Invoice they receive.
Kindly let me know steps to configure in SAP PI 7.1 to accept the inbound 997 files successfully and place them as it is in PI application server.
Regards,
Subhajit.

Hi , I too have the same requirement.
i am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
I followed all the steps to create EDI X12 810 ecs file, converted this to .xsd and then to .dat in Oracle Document Editor as explained in the B2B user guide.
I also configured the trading partner , created agreements and deployed in B2B console. There is no mistake . as i can able to see the def file while configuring Oracle B2B in my Jdev.
I deployed the same process . But no instance is creating for my process. I also configured listing channel to Generic File 1.0. please help me out in this . Thank you.

Hi gurus, i got a task with related to see-burger plz help me........

here am giving description for my dought
i have to write ,in EDI-IDOC MAPPING USING SEE-BURGER adapter,in that mapping condition is ,When data found in ST01, map synonym of source GS02 using table GSNDPRNI
in IDOC format should be 10 digits padded to left with zeros.
here EDI segment GS02,& idoc segment is EDI_DC- SDNPRN.
PLZ HELP ME FOR HOW TO MAP THESE TO FIELDS.

Hi Rohit.
While doing the mapping for STO1, check if the length of STO1 is greater than zero. if it is greater than zero, now map GS02 to it's target field. use a udf to pad the value of the GS02 field with zeros.
Hope this helps u.
Regards,
Hari

Seeburger EDI Adapter with terrible performance problems

Hi,
we installed seeburger edi adapter on PI 7.1 and we have terrible performance problems:
We have a mail sender adapter polling a mail account.
Till the message is visible inside integration engine it takes sometimes 1-2 minutes or longer.
We already tuned the j2ee-engine and checked the DB-indexes (there are some OSS Notes) - no success.
We think that the problem is inside the DB-tables of Seeburger an that some indexes are missing (Oracle DB).
Any ideas?
Thanx
regards
Wolfgang Hummel

Hi,
I think in PI 7.1 SAP installed their own Java-VM (compatible with Sun 1.5) - is it true?
Do you have the same performance problems inside the adapter?
The adapter is like a black hole and it take sometimes one hour till you can see a message inside the integration engine (sxmb_moni).
Regards
Wolfgang

Seeburger EDI adapter Vs Seeburger BIC adapter

hi,
what is the difference between Seeburger EDI adapter Vs Seeburger BIC adapter.any docs please.
thank you,
babu

Hi,
Seeburger EDI adapter Vs Seeburger BIC adapter.
If your edi file converts with BIC mappers then you would have to use BIC adapter or BIC modules, i hope BIC modules, next EDI Adapters see the below links to get more details..
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards
Chilla

Details on XI EDI adapter from seeburger

Hi,
We currently have our B2B integration going through Gentran & Webmethods.
We are having a evaluation process on the different tools available.
Can anyone give information on the licensing details of the XI EDI adapter from seeburger? Also do they have evaluation period? Has anyone gone through this process?
We have written to seeburger on this, but i thought of posting on SDN as the responses would be faster
Thanks & Regards,
Renjith

Hi Renjith,
There is no downloadable trial version available.
You need to contact your local or regional Seeburger sales office.
Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Abhy
Message was edited by: Abhy Thomas

TO DEVELOP AN EDI ADAPTER IN XI

What is the procedure to be followed to develop an EDI adapter in XI?
Can anyone help me out in this regard?
Regards
Leela Ratnam

Hi,
Why u wanted to develop EDi adapters there are third party EDI adapters available in the market.
Third party adapters are provided by Seeburger which is used to integrate EDI scenarios. Adapters are AS2,VAN,OFTPS,X400.
U need to purchase a license for the same.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Thnx
Chirag

Is EDI ADAPTER available

Hi guys,
We are specifically looking for training people on EDI adapter and integration of SAP XI.
I just got this requirement.....even i am not sure about this requirement...
Can any one let me know if there is EDI adapter...
Cheers,
Raghavesh

Hi
yes Seeburger EDI adapter is available
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt

Seaburger EDI adapter

Hi All,
Did anyone using Seaburger EDI Adapter? I need info on the usage, references, comparision to GENTRAN for EDI Usage?
Appreciate any help from forum.
ravi

Hi Ravi,
I will talk to my colleagues in SAP to see if they have any info on the FEDEX/UPS real-tim interface with XI and get back to you.
In the meanwhile, go thru the following link and see if that can be of any help to you.
I have posted the same link in your other thread.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/a-c/creating a comprehensive collaborative platform with sap netweaver, part ii.pdf
Rgds,
Sam Raju

EDI adapter in XI

what is the significance of using EDI adapter in XI...jena

Hi...some more information
Third party adapters are provided by Seeburger which is used to integrate EDI scenarios. Adapters are AS2,VAN,OFTPS,X400.
U need to purchase a license for the same.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
If SAP XI can manage to develope EDI adapters then SAP XI dont require third party adapters for EDI conversion.
We have other options as well for EDI message conversion.
here are the few links which u can refer.
1) Using stylus studio
2) conversion agent
http://www.stylusstudio.com/edi/EDIFACT_translate.html
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Thanks
Swarup

IPod mini can't see firewire power adapter after 1.4.1 update

I updated my mini to the (infamous) 1.4.1 update, and now my firewire connection doesn't appear to work. When plugged into the computer with the firewire cable, mini doesn't appear on desktop or in iTunes, though it will start recharging the battery. When firewire power adapter is plugged into dock or into mini to try to recharge, it doesn't work. I purchased a new firewire cable & adapter but it's behaving the same way. USB cable to computer works fine (mini shows up on desktop and in iTunes). I've tried the Reset, Retry Restart, Reinstall, Restore. protocol several times with no success. I've tried Resetting the mini while plugged into the firewire power adapter. No luck.
Any suggestions?
Is there a way to uninstall this update?
g5 Mac OS X (10.4.4)

Thanks Chris - I did this, and am now running the earlier version of the software, but my iPod still can't see my power adapter. Any ideas about this?

See burger EDI adapter (X12) functionalities

Similar Messages

Maybe you are looking for