See disk in Finder but can not connect
I see the Time Capsule in Finder in the Shared section, but when I click on it it says "connection failed"
What could be wrong?
Message was edited by: Christer Hiort1
Thanks for your help baltwo! But after all done this ... still no Lacie in the finder (Finder's preferences are set to display ext HDs). By starting up the Lacie i get popup window with message that the Lacie has to be initialised. But nothing is changed on the disk since yesterday when it worked properly. It must have to do with the update wich i installed last night.
Similar Messages
-
I'm from the USA but am on vacation in Brazil; I have a great WiFi connection but can not connect to the iTunes Store. Is this because I am out of the Country?
Thank you very much for your insight; I guess I had assummed that iPads/iPhones/iPods were here in Brazil and further assumed that the iTunes store would also be available.
-
Can not access web wifi simble on but can not connect the the internet
wifi on but can not access internet
I COULD SOLVE THE PROBLEM!!! : CHANGE YOUR ISP
I it is obvious that we are talking about different issues, but all arise from the same origin. I am a surgeon and fortunately one of my patients is executive manager of one of biggest ISP companies from which I have bought my Internet service for home and my clinic.
One day I told him the problem and he promised to check it for me. A few days later he called me and discussed the exact problem (unfortunately as I am not I.T professional, I couldn’t understand it well, I can just remember he was talking about MULTIPLEXING incompatibility between Mac security settings and that specific ISP multiplexing settings, He also said they had similar problems with some Linux users. I can remember he relate the problem to cheap ISP hardware, which leads to security issues which are ignored by Windows Systems but leading to connection blockade in Mac Browsers. That’s why if you PING yahoo.com, you will see everything is OK but your browsers are not working)
In fact this is a hardware issue which is related to ISP (Internet Service Provider) security and not your Mac.
The day after, I took my MacBook to some ISP offices and asked them to let me connect to their line just for a test. “ Surprisingly I found out without changing my MacBook’s settings it works well with some ISPs and not with others!! “
I have two ADSL lines: one at home and one in my clinic. First I changed my home ISP and everything is well at home from the day I did the change. But before changing my clinic’s ISP it worked at home and not at the clinic. Later I changed my clinic’s ISP and afterward never I had any problem. This proves ( as that manager said also) this problem is related to ISP and not Mac itself and that’s why Apple could not have resolved the problem yet: different ISPs have different issues.
Here I can make some suggestions:
1- First, take your MacBook into different ISP offices and find the one which works well (before making the contract and paying money to the ISP, restart the Mac or send it into sleep mode repeatedly to make sure the connection never drops with restart or sleeps)
2- Change your modem: Modems as TP-LINK, D-LINK, are not well compatible with Mac. Apple modems or Linksys are perhaps the best choices (this is not main cause of internet drop, but can affect the performance)
3- Make sure your neighbor’s Wi-Fi is not exactly on the same channel as you are using (I use iStumbler for finding my neighbor’s channels)
4- Find best DNS: ask your ISP to provide you most compatible DNS’s for you. Perhaps most known DNSs are 8.8.8.8 and 4.2.2.4.It helps you to browse the Internet more efficiently
Some people in other forums suggested that upgrading to Mountain Lion has helped them. But It didn't work for my clinic's line. Just changing the ISP at clinic resolved my problem
BETWEEN THESE 4 SUGGESTIONS, THE FIRST ONE IS THE MAIN SOLUTION AND NO 2-4 CAN HELP THE PERFORMANCE.
Move on!!! Change your ISP and let me know if it works!!!! -
Networks seen by airport, but can not connect to internet
Hello,
This is for a powerbook G4 running 10.5.8 that previously connected to our time capsule without issues. Recently, it stopped connecting to the internet although our two macbooks, phones, etc. have no problem.
It can see our network and also an open network and will "connect" with full signal strength but will not connect ot the internet. When running diagnostics it will come up with 'network change detected' and then will go through turn off modem and router and will then continue in a loop with turning off modem or router and not let me past the "network settings (yellow tab in front of network settings)" portion of network diagnostics. I've tried setting up a network and this did not work. I have also tried connecting to the time capsule which was not recognized either. I like the powerbook for traveling and since the ethernet source was fried years ago, it is pretty much useless without the airport functioning.
Your help would be greatly appreciated.Once I had a very similar problem and took it to the Apple Store. I'm not entirely certain what they did, but I believe it was to remove some corrupted .plists. Maybe someone here would know which ones would be the relevant ones to look at.
In the meantime, you might consider one of these as a workaround:
http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
It's not the most elegant solution, but I have a couple of these and they seem to be very reliable, and cheap enough at the sale price.
Good luck! -
TS1424 downloaded itunes but can not connect to store message reads error 11222
Trying to connect to itunes store using windows 7 professional. I have downloaded and re-installed so many times and still I can not connect. The help function is saying I am not connected to the internet. Error message 11222. I can not update my iphone with new software either. It says I do not have internet connection. Unfortunately I am not very computer savvy so no idea what operating system is.
The help function is saying I am not connected to the internet. Error message 11222. I can not update my iphone with new software either. It says I do not have internet connection.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
TS4062 my ipod touch shows up in left column but i get messages like we see you but can not connect
My ipod touch shows up in the left side,but itunes can not identify my ipod.It is frozen and I can not doany tasks in itunes. my computor says my driver is good but connection test does not see a ipod . I have restarted and updated . I tried to use another computor but it says the same thing.a message about a disk comes up also. I used my ipod shuffle and it works fine! Iam going in circles trying to fix this! Help and Thanks Rileystoker
when u c the ipod under devices can u click on it?
does it show under it the following
music
flims
tv programmes
podcasts then something like
2010 music
90's music
music videos
these may not show as nothing been added or played
my top rated
recently added
recently played
top 25 played
if so simply add music, videos, etc to the ipod
it not click on the ipod tab on the top you should see
summary>apps>music>films>tv programmes>podcasts>books>photos>info>nike+ipod
you want to click on summary tab and click on the restore tab this will reset the ipod back to factory settings and let you set on the ipod again -
NEED HELP, WIRELESS CONNECTED BUT CAN NOT CONNECT TO INTERNET
SOMEWHAT COMPUTER CHALLENGEDMY LINKSYS SAYS IT IS CONNECTED WITH GOOD CONNECTION, BUT I CAN NOT GET MY WIRELESS COMPUTER TO CONNECT TO INTERNET, BY HARDWIRED COMPUTER CONNECTS FINE. ANY SUGGESTIONS ON WERE I NEED TO START?
If you want some input from Linksys you have to contact Linksys support. This is a community forum...
Check the following please:
1. The computer wired to the router has internet access.
2. On the computer wired open http://192.168.1.1/ in your browser. The username remains empty the default password is "admin". You may have changed the password during initial setup.
3. Click on Wireless. Take a note of the Wireless Network Mode (mixed, b only, g only), the Wireless Network Name, Channel, and whether SSID broadcasts are enabled or not. If you still have the default network name "linksys", please change it to something unique and save the settings for this page.
4. Next, click on Wireless Security and note the settings in this tab. It will be easier for troubleshooting if you post the current wireless settings noted.
5. Now use the wireless computer (if it was the one wired to the router before, unplug it) and let it search for wireless networks. It should find a wireless network with the "Wireless Network Name" from 3. Try to connect to this network. If it asks for a passphrase or key, you have to enter the passphrase from 4. for WPA/WPA2. If you have WEP encryption in 4. you have to enter "Key 1" not the passphrase!
6. If the connection fails please posts the exact error message you see.
7. If the connection succeeds, try to open a URL in the internet, e.g. http://www.google.com/
8. If it does not work open a command prompt window: Start - Run... - "cmd". Enter "ipconfig /all". Copy the output of this command into your next post. -
Can connect to LAN wirelessly but can not connect to the internet.
The problem:
I can connect to the wireless router and modem router wireless and can browse the router setting web pages etc without issue. However i can not browse the internet, send or receive mail etc.
The setup:
A Belkin/iinet modem connects to the internet (ip 10.1.1.1), a DLink 565 then broadcasts the signal wirelessly (ip 10.1.1.100).
What i have tried:
Trusty old powercycle
I know the internet is working via the wifi as my ipod touch has full internet functionality through my wifi.
I have tried using ip address instead of urls to browse the web to no luck.
I have tried deleting Libary\Preferences\SystemConfiguration\preferences.plist
I have tried reseting the DHCP lease.
The only other thing i know works (eventually) is if i constantly change locations back and forth and turn airport on and off repeatedly, eventually i will get on the wifi but that can take upwards of an hour.
The macbook also works fine via ethernet connected to the wireless router.Check these details:
1. Right click your wireless connection
2. Select STATUS
3. Select the SUPPORT tab
4. Select the DETAILS button
You should see a page with all sorts of network details.
Make sure that you see the following:
1. You have an assigned IP address from your router
2. You have a default gateway address -- typically the IP address of your router.
3. A primary and alternate DNS server address (the router gets
these from your ISP and passes them along during DHCP connect
processing.)
I found that step #3 did not happen reliably. Your mileage may vary. I set DNS server values into my router, based on what I got from my ISP, so that the connect-time data handoff was not required. A large part of my troubles went away.
~~~ Dan 0;-D -
4150L - Works on web, but can not connect via VPN or Remote Desktop
Recently purchased a 4150L and installed the latest firmware. We have been able to access all public websites without any problems. But, when we try and access our customers computers via VPN (various types) or Remote Desktop, we can't connect. We can sign-in to VPN, but when we try and access the computer, it says "can't connect". Exact same message with Remote Desktop. We are able to connet when use a Verizon phone as a hotspot and from every other internet service that we have tried (i.e. hotels, starbucks, etc.) It appears it is an issue with the 4150L.
Verizon Tech Support has been no help!
All ideas are appreciated!
Thanks,
SkipSkip,
VPN traffic should be allowed through on the MiFi 4510L by default. I know I do not have any issues with mine on either the Cisco IPSec or Cisco SSL VPN Clients.
If Verizon DNS is interferring then perhaps you could try to connect to your VPN via a direct IP Address instead of a URL. Not sure what VPN client you have but there should be a No DNS option to connect if you know the correct IP. You could also try switching your DNS to one of the free ones such as the one offered by Google or any of the others.
VPN's carry alot of overhead on existing connections in my experience. Its not untypical to have a 3G connection cut in half when a VPN is applied. Try running a speed test to make sure your connection is atleast 1 MB on download before initiating a connection. If the performance of the MiFi is too poor in that area it may never be stable enough to support a connection. Feel free to post some Speedtest.net averages so we can see what you are working with.
Something to note about the MiFi 4510L is that it is on the SIM card network. That means that NAT is always going to be an issue and block your users from providing a truely public IP Address. Directly remoting to them through any means will be nearly impossible. -
Airport reads full signal, but can not connect to internet
Hi everyone,
I have a new powerbook that I'm trying to connect to a home network which is set up with a cable modem and a wireless linksys router. The airport reads that it has full signal from the "linksys" wireless network, however I can not get on the internet through the signal. When I connect the computer directly through the the ethernet port, it works fine. I've taken the computer to another location with the same cable modem and wireless linksys router setup, and it worked fine through the wireless. I've actually had this problem quite a few times with various wireless networks (it connects directly, but not through the full signal that reads on the airport), and I was wondering if there are some setting that need to be changed or checked for certain wireless networks. Any help would be great. Thanks,
SofiI'm sorry I think this makes thing harder, but I have no idea. It's actually a friend's network so I can't check at the moment. I know there is no password to the network and that they have two pcs running fine wirelessly. Is there a way I can check these settings and see what's going on?
-
Please help me to connect to app store for ipad4 but can connect to itunes. Thank you.
AlexLee123456 wrote:
Thanks for the help guys... iTunes is up and running (on my PC) however when I plug in the iphone it just doesn't connect to it, so I guess it must be itunes fault, however I have restarted my computer and this hasn't helped either
The iPhone is still stuck in recovery mode?
If the iPhone is not detected you will need to try other USB ports on the PC or try other USB cables. You could also try another PC/ Mac is you have one available to see if the PC is at fault. -
I can Ping FW inside interface but can not connect to remote resources
dear all
i configer my asa 5520 through ASDM to enable VPN Connection , i follow the cisco steps and it works fine and the anyconnect version 3.1 in Windows 8 - one day troubleshoot for this point only - can connect and have an IP address from the range , but i have something wrong in NAT may be because all guides talking about old ASDM ( NAT Exempt) but i am confeused to apply it on the new ASDM.
i can ping the inside interface from my labtop which using anyconnect , but i can not access anything else inside my network
Please anyone has a solution , please describe it using ASDM , thanks for help
This is my configuration
interface GigabitEthernet0/1
description
nameif SRV_ZONE
security-level 50
ip address 192.168.1.1 255.255.255.0
interface GigabitEthernet0/2
description
nameif TRUST_ZONE
security-level 100
ip address 172.17.200.1 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif MGMT
security-level 0
ip address 10.10.10.1 255.255.255.0
dns server-group DefaultDNS
domain-name xxx.xxx.xxx
object network obj-192.168.1.11
host 192.168.1.11
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service obj-tcp-source-eq-25
service tcp source eq smtp
object network obj-192.168.1.12
host 192.168.1.12
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object service obj-tcp-eq-25
service tcp destination eq smtp
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network obj_any-01
subnet 0.0.0.0 0.0.0.0
object network obj-172.17.8.8
host 172.17.8.8
object network obj-172.17.0.0
subnet 172.17.0.0 255.255.0.0
object network obj_any-02
subnet 0.0.0.0 0.0.0.0
object network obj_any-03
subnet 0.0.0.0 0.0.0.0
object network obj_any-04
subnet 0.0.0.0 0.0.0.0
object network obj_any-05
subnet 0.0.0.0 0.0.0.0
object network obj_any-06
subnet 0.0.0.0 0.0.0.0
object network obj.172.17.8.115
host 172.17.8.115
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service http
service tcp source eq www destination eq www
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service https
service tcp source eq https destination eq https
object service newservice
service tcp source eq pop3 destination eq pop3
object network mail
host 172.17.8.8
description mail
object network 192.168.1.11
host 192.168.1.11
description smtp
object service smtpnew
service tcp source eq 587 destination eq 587
object network VPN_RANGE
description VPN ACCESS RANGE
object network VPN_PoOL
subnet 172.17.16.0 255.255.255.0
description vpn
object-group network DM_INLINE_NETWORK_1
network-object host 192.168.1.11
network-object host 192.168.1.12
object-group network Eighth_Floor
network-object 172.17.8.0 255.255.255.0
object-group service WEB_SERVICES
service-object tcp destination eq www
object-group network ENT_SERVERS
network-object host 192.168.1.11
network-object host 192.168.1.1
object-group network DM_INLINE_NETWORK_2
network-object 172.17.200.0 255.255.255.0
network-object 172.17.8.0 255.255.255.0
object-group service DM_INLINE_TCP_2 tcp
port-object eq www
port-object eq https
port-object eq smtp
object-group service web tcp
port-object eq www
port-object eq xxx
port-object eq ftp
port-object eq xxx
port-object eq xxx
object-group service xxx_Web_and_Email
service-object object http
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
object-group protocol DM_INLINE_PROTOCOL_3
protocol-object ip
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 172.17.0.0 255.255.0.0
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 any
access-list justice_splitTunnelAcl standard permit 10.100.100.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl remark vpn
access-list xxx-VPN_splitTunnelAcl standard permit 172.17.16.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl standard permit any
access-list cap extended permit tcp any host xxx.xxx.xxx.xxx eq smtp log
access-list cap1 extended permit tcp host 192.168.1.11 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit tcp 192.168.1.0 255.255.255.0 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit ip host 192.168.1.11 any
access-list TRUST_ZONE_access_in extended permit ip host 172.17.88.108 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_2 10.10.3.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_3 10.10.50.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.8.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.200.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.0.0 255.255.0.0 host 192.168.1.12
access-list TRUST_ZONE_cryptomap extended permit ip xxx.xxx.xxx.xxx 255.255.255.248 any
access-list outside_access_in extended permit tcp any host 192.168.1.11 eq smtp
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq www
access-list outside_access_in extended permit tcp any host 192.168.1.12 object-group web
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq pop3
access-list outside_access_in extended permit ip 172.17.16.0 255.255.255.0 any inactive
access-list vpn remark vpn
access-list vpn standard permit 172.17.16.0 255.255.255.0
pager lines 24
logging enable
logging trap informational
logging asdm informational
logging host TRUST_ZONE 172.17.8.100
mtu INT_ZONE 1500
mtu SRV_ZONE 1500
mtu TRUST_ZONE 1500
mtu MGMT 1500
ip local pool VPN_POOL 172.17.16.100-172.17.16.254 mask 255.255.255.0
ip verify reverse-path interface INT_ZONE
ip verify reverse-path interface SRV_ZONE
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any SRV_ZONE
icmp permit any TRUST_ZONE
asdm image disk0:/asdm-635.bin
no asdm history enable
arp timeout 14400
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.11 obj-xxx.xxx.xxx.xxx service any obj-tcp-source-eq-25
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.12 obj-xxx.xxx.xxx.xxx
nat (SRV_ZONE,INT_ZONE) source dynamic obj-192.168.1.0 interface service obj-tcp-eq-25 obj-tcp-eq-25
nat (INT_ZONE,SRV_ZONE) source static any any destination static 192.168.1.11 obj-172.17.8.8 service obj-tcp-source-eq-25 obj-tcp-source-eq-25
nat (TRUST_ZONE,INT_ZONE) source static VPN_PoOL VPN_PoOL destination static VPN_PoOL VPN_PoOL
object network obj_any
nat (SRV_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-01
nat (SRV_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj-172.17.8.8
nat (TRUST_ZONE,INT_ZONE) static xxx.xxx.xxx.xxx service tcp www www
object network obj-172.17.0.0
nat (TRUST_ZONE,SRV_ZONE) static 172.17.0.0
object network obj_any-02
nat (TRUST_ZONE,INT_ZONE) dynamic interface
object network obj_any-03
nat (TRUST_ZONE,SRV_ZONE) dynamic interface
object network obj_any-04
nat (TRUST_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-05
nat (TRUST_ZONE,SRV_ZONE) dynamic obj-0.0.0.0
object network obj_any-06
nat (TRUST_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj.172.17.8.115
nat (TRUST_ZONE,INT_ZONE) static obj.xxx.xxx.xxx.xxx service tcp www www
object network mail
nat (TRUST_ZONE,INT_ZONE) static obj-xxx.xxx.xxx.xxx service tcp pop3 pop3
nat (TRUST_ZONE,INT_ZONE) after-auto source static obj-172.17.8.8 obj-xxx.xxx.xxx.xxx service https https
access-group outside_access_in in interface INT_ZONE
access-group DMZ_access_in in interface SRV_ZONE
access-group TRUST_ZONE_access_in in interface TRUST_ZONE
route INT_ZONE 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
route TRUST_ZONE 10.10.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.11.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.12.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.13.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 172.17.0.0 255.255.0.0 172.17.200.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authentication serial console LOCAL
http server enable
http 172.17.8.0 255.255.255.0 TRUST_ZONE
http 172.17.8.155 255.255.255.255 TRUST_ZONE
http 172.17.8.45 255.255.255.255 TRUST_ZONE
http 10.10.10.2 255.255.255.255 MGMT
http 192.168.1.12 255.255.255.255 SRV_ZONE
http 0.0.0.0 0.0.0.0 INT_ZONE
http 172.17.200.0 255.255.255.0 TRUST_ZONE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map pol 1 match address TRUST_ZONE_cryptomap
crypto dynamic-map pol 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map INT_ZONE_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map TRUST_ZONE_map0 1 ipsec-isakmp dynamic pol
crypto map TRUST_ZONE_map0 interface TRUST_ZONE
crypto map INT_ZONE_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map INT_ZONE_map0 interface INT_ZONE
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
fqdn SEC-xxx-FW1
subject-name CN=SEC-xxx-FW1
no client-types
proxy-ldc-issuer
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment self
subject-name CN=SEC-xxx-FW1
keypair sslvpnkeypair
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 31
57f4e52e 6b851966 77515d62 c209a0df 1c32ce94 bb90cbce 497cfd04 6745ea85
efb75f85 2ae1ad35 344d94ab 915e01ab d3292626 ac697a52 b4ed6632 d3ed2332 ae
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate e6054352
c64f3661 30f14c3d 06b5f039 9f14560d 3b154fd1 42782268 7531689e 8e547d91
85e88415 e326f653 74733a6c a3f5c935 f7e83f56 f6
quit
crypto isakmp enable INT_ZONE
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INT_ZONE
ssh 172.17.8.0 255.255.255.0 TRUST_ZONE
ssh 10.10.10.2 255.255.255.255 MGMT
ssh timeout 5
console timeout 0
management-access TRUST_ZONE
vpn load-balancing
interface lbpublic INT_ZONE
interface lbprivate INT_ZONE
priority-queue INT_ZONE
tx-ring-limit 256
threat-detection basic-threat
threat-detection scanning-threat
threat-detection statistics host number-of-rate 3
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint1 INT_ZONE
webvpn
enable INT_ZONE
svc image disk0:/anyconnect-win-2.1.0148-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy xxx-VPN internal
group-policy xxx-VPN attributes
dns-server value xx.xx.xx.xx xx.xx.xx.xx
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value xxx-VPN_splitTunnelAcl
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol webvpn
group-policy GPNEW internal
group-policy GPNEW attributes
dns-server value 172.17.8.41
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
default-domain value xxx.xxx.xxx
address-pools value VPN_POOL
username VPNAM password xxx encrypted
username VPNAM attributes
service-type remote-access
vpn-group-policy xxx-VPN
tunnel-group xxx-VPN type remote-access
tunnel-group xxx-VPN general-attributes
dhcp-server 172.17.8.41
tunnel-group xxx-VPN ipsec-attributes
pre-shared-key *****
tunnel-group pol type ipsec-l2l
tunnel-group pol ipsec-attributes
pre-shared-key *****
trust-point ASDM_TrustPoint0
tunnel-group SSLClientProfile type remote-access
tunnel-group SSLClientProfile general-attributes
address-pool VPN_POOL
default-group-policy GPNEW
tunnel-group SSLClientProfile webvpn-attributes
group-alias SSLVPNClient enable
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ip-options
inspect pptp
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:78a941e3f509dec8f3570c60061eedaa
: endthanks god
i solve the problem
the problem is in NAT
i creat an object with the ip address host from VPN pool and name it vpn
then i do the nat from inside to that host as the following picture...
trust zone is the inside zone
vpn is the outside vpn host...
thanks and hope it helps anyone else... -
I have a signal but can not connect to internet.
Ok, I have an Ibook clamshell and an airport Graphite. The Ibook picks up a signal but when I go to Safari or Internet Explorer I get a message saying the server can not be found. Help, please?
In the opening screen of AirPort Admin Utility, check the firmware version of your Graphite base station. It should show up as "Description: Base Station Vx" where x is the firmware version. If it is earlier than 3.84, download updated firmware from this page and install it.
I found the user guide for your modem on Arris's Web site. It prompts me to suggest the following additional things:
1. Although the user guide says to use a cross-over Ethernet cable for connection to a hub or home router (as opposed to the supplied cable, presumably a straight-through Ethernet cable, for direct connection to a computer), I believe that the Graphite acts like a computer in this regard instead of like a router. In other words, the Graphite connects to a modem, hub or router using a straight-through cable, but the Graphite would need a cross-over cable to connect to a computer. Try using a straight-through cable, if you haven't already.
2. Try pushing the Reset button on the back of the modem. Use a pointed, non-metallic object to press the button. I recommend doing this while the Graphite and both computers are powered off, then start up the Graphite first, before the computers.
3. This type of modem evidently does not itself serve as a router. It has connections for two computers (one via USB, one via Ethernet), but your ability to get two Internet connections through it depends on whether your Internet service provider is willing to supply two IP addresses. (If you try resetting the modem with the pc off, as in paragraph 2 above, and the Graphite acquires a working IP address, enabling the iBook to access the Internet, but the pc then can't, that would indicate that you can receive only one connection at a time.) I suspect that this is, in fact, your problem, unless your cable provider has said that you could connect two computers to the Internet with this modem.
It would be possible to share a single Internet connection, if the pc has either wireless or Ethernet capability. If it has wireless, you could simply disconnect the pc's USB connection to the modem and have it join the Graphite's wireless network. If it has Ethernet, you might be able to connect it to the modem's Ethernet port along with the Graphite, using an Ethernet hub, but this is difficult and uncertain, as well as less secure. If the pc can handle Ethernet, you'd be better off getting a newer and better wireless base station that has 2 or more Ethernet ports, or, alternatively, a router to be inserted between the modem and both the pc and the Graphite. In any case, a base station that can use WPA or WPA2 wireless encryption would be a great improvement, as the quite insecure WEP protocol is the best the Graphite can handle.
Message was edited by: Larry R. -
Hi all, trying to set up my MBPro...seems to be connecting to my AirPort Base Station w/out any troubles...but when I try to get online I'm getting a "can't connect to the Internet" message. I checked my network settings, restarted multiple times, etc. No luck. Seems to be a problem with the IP address (I think)...but not sure how to resolve it. I have an iMac and iPhone in the house that are able to connect and get online w/out issues. Any thoughts? TY!!
Are you asking the make/model of the computer or the AX base station?
Neither, I was interested in the make/model of the cable modem.
Our ethernet connection was fried in an electrical storm so we had to go wireless.
Electrical storms are never a good thing when it comes to electronics. What was/is your current network configuration? Is it something like the following?
Cable modem > (Ethernet cable) > AX > (wireless) > wireless devices
Is there another router, other than the AX, in the configuration? ... or an Ethernet switch? I'm just trying to understand your network to best advise you on how to configure the AX. -
Iphone can detect the paired devices but can not connect
My iphone 5 can detect the paired devices but once I enter the pin code It will not connect.
I was wondering what the Renew Lease button did, that is why I never tried it before. I just tried it now and no luck. It still is not connecting. I have had this phone for almost a year now and this has never happened before.
I appreciate the effort anyways.
Maybe you are looking for
-
Dynamically changing the WHERE clause in detail VO in Master Detail
Hi, I want to develop a search functionality, results will be in a table, which will have an inline table displaying the details per row found. I have a MD defined trough viewlink. I do change the master VO at runtime (set the entire SQL), based on t
-
Sales set in Retail and BOM explosion in sales order
Greetings. I configured a sales set that contains variants of generic articles and also unique articles as follows: Sales set: distinct code, LUMF - item category group, gets TAQ item categ in SO; it contains: - Var 1 of article X, distinct code, NOR
-
Could Not Access Network Location
Trying to install upgrade of ITunes on Windows. It installed Quicktime just fine. What's wrong here? Dell Inspiron 6000 Windows XP SP3
-
HT1596 macbook Pro 15" mountain lion does't have any Audio Line In/Out.
i'm macbook Pro Retina display 15" user. i realised that this macbook does't have any Audio Line In/Out. I really need this to record audio direct from instrument to GarageBand. Any other way to do this?
-
How do I sync my Nexus 5 ( Android 4.4 Kitkat ) with iCloud ?
How do I sync my Nexus 5 running android 4.4 kitkat with icloud. I mean the calenders, reminders etc. The remimders that i set on the nexus 5, I recieve on my ipod and mac....but the opposite doesnt happen unless i set it in the gmail calendar.... Ho