See my error : (REP-1272: Column CF_1 may not be used as break Column.)

Hi master
Sir I have master detail report and I use one formula column and one place holder column in my report in master section
I use this code
function CF_1Formula return Date is
begin
if :chqdate is not null then
     :cp_1 :=:chqdate;
else
     :cp_1 :=:sdate;
     end if;
end;
Sir when I run my report then system give me this error
REP-1272: Column CF_1 may not be used as break Column.
Please give me idea how I get report
Thank
aamir

Hello,
Break Order cannot be used for some Column Type :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_col_break_order.htm
(CLOB is not explicitly specified, but the restriction for LONG and LONG RAW exists for CLOB too)
Regards

Similar Messages

Error "Ledger group 0L may not be used" - CO15

Dear guru,
When I want to save Production Order Confirmation via CO15, there is an error message :
Ledger group 0L may not be used
Message no. FAGL_LEDGER_CUST102
Diagnosis
Ledger group &1 is assigned to another application.
FYI, when I check tabel T881 (Ledger Master), there are two leading ledger : 0L and OL. It's very strange.
As far as I know, in standard SAP there is only one leading ledger, it is 0L.
I check in customizing (Ledger > Define Ledgers for General Ledger Accounting), there is only one ledger: OL (as leading ledger), so I untick Leading Ledger indicator for Ledger 0L directly on table T881, but the error message still appear.
How to solve this?
Thanks before

Hi Hanny Ali,
The message F5 670 is processed if there is a problem in account determination. The message means the account determination in the SD billing document does not work probably. This could also be caused by a wrong or incomplete customizing.
Please find note 146879 to check the customizing on this issue. From past messages, this problem is usually caused by a missing or incorrect customizing for the G/L account.
Please note that if it's a case of a cancellation document the field VBRK-SFAKN is filled. When this is filled the system does not carry out account determination. In debug you can remove this entry and the account determination will be revoked. This would resolve the issue.
Could you please review customizing setting VKOA if all the relevant information are being maintain correctly?
Please also review the notes:
-> 0216974 Error F5670 during release to accounting
-> 0113512 VF051 "Doc. & saved (error in accnt determination)
-> 1325446 SDBONT06: G/L accounts of rebate conditions are
I hope this answer your issue with error F5 670.
Best Regards,
Vanessa.

Entity type "EJB-JAR" may not be used in public part "ejbjar_api"

Experts,
Can you please help me to identify why the error 'Entity type "EJB-JAR" may not be used in public part "ejbjar_api", unsupported purpose.' appears on NWDS while creating a project on a DC and how can this be resolved.
Thanks in advance
-Lave

Hi Jain,
is the error message that the public part is not found prefixed with [dcmake]? If yes that rather points in the direction that there is a problem with the metadata information. (PP name not correctly spelled, renamed after initial creation, perhaps even some problems with upper/lower-case letters depending on your platform.)
What SP are you using? The log looks like some rather old build plugins are used on a newer NWDI installation.
The warning from the [wdgen] task and the subsequent failure of the [wdminimizer] can be ignored. "ERROR: Non Fatal Error" is a bit quaint, but it really is not fatal. It just means that the minimizer didn't find the data required to operate. The [wdgen] warning means that the WebDynpro generator could not write the information. So the jar files in your public part are maybe a bit bigger than necessary but that's all.
Best regards,
Marc

ORA-01409 NOSORT option may not be used

Hi all,
We've got a range partitioned table, each partition resides in a different tablespace (locally managed) thus :
create tablespace abcblast_hit_test_data1
datafile '/export/data/oracle/HLDDEV05/abcblast_hit_test_data1.dbf'
size 2600m extent management local uniform size 2500m;
create tablespace abcblast_hit_test_data2
datafile '/export/data/oracle/HLDDEV05/abcblast_hit_test_data2.dbf'
size 2600m extent management local uniform size 2500m;
Two large SORTED files of data are sql*loaded into each partition, taking up ONE extent in each partition
I then try to create a non-unique index on the table using NOSORT and get the error ORA-01409 NOSORT option may not be used; rows are not in ascending order
... with the following reasoning :
For non-unique indexes the ROWID is considered part of the index key. This means that two rows that appear to be stored in ascending order may not be. If you create an index NOSORT, and two of the rows in the table have the same index values, but get split across two extents, the data block address of the first block in the second extent can be less than the data block address of the last block in the first extent. If these addresses are not in ascending order, the ROWIDs are not either. Since these ROWIDs are considered part of the index key, the index key is not in ascending order, and the create index NOSORT fails.
BUT the data for each partition DOES reside in one extent :
select partition_name, tablespace_name, extent_id, bytes
from dba_extents
where segment_name = 'ABCBLAST_HIT'
and segment_type = 'TABLE PARTITION';
PARTITION_NAME     TABLESPACE_NAME          EXTENT_ID     BYTES
PART_01          ABCBLAST_HIT_TEST_DATA1     0          2621440000
PART_02          ABCBLAST_HIT_TEST_DATA2     0          2621440000
(Oracle 9.0.1 on Linux)
HELP !!!! Does this mean we can't use NOSORT when building indexes on partitioned tables ?!
(Note : if NOSORT is not used then a sort is performed which we are trying to avoid - final table will contain 1.6 billion rows and will consist of 50 partitions)

Hi ,
Still i am facing same error like. Can any body help me..
The following index(es) on table KA31CVLA.CITY were processed:
index KA31CVLA.CITY_PK was made unusable due to:
ORA-01409: NOSORT option may not be used; rows are not in ascending order
index KA31CVLA.CITY_UQ01 loaded successfully with 29761 keys
i have create one table CITY in user KA31CVLA.
CREATE TABLE CITY
CNTRY_CD VARCHAR2(2 BYTE) NOT NULL,
CITY_NM VARCHAR2(40 BYTE) NOT NULL,
SEQ_NBR NUMBER(10) NOT NULL,
POSTL_STT_EQNT_CD VARCHAR2(9 BYTE),
LATITUDE NUMBER(9,5) NOT NULL,
LONGITUDE NUMBER(9,5) NOT NULL
and then added primary constraints
ALTER TABLE CITY ADD CONSTRAINT KA31CVLA.CITY_PK PRIMARY KEY (CNTRY_CD, CITY_NM, SEQ_NBR)
after this default unique index created as below
CREATE UNIQUE INDEX KA31CVLA.CITY_PK ON KA31CVLA.CITY (CNTRY_CD, CITY_NM, SEQ_NBR)
after that i have added one more constraints is
CREATE UNIQUE INDEX KA31CVLA.CITY_UQ01 ON KA31CVLA.CITY (CITY_NM, POSTL_STT_EQNT_CD, CNTRY_CD, SEQ_NBR)
Now trying to load data to KA31CVLA.CITY table through SQLLDR
here is the command which i am executing to insert..
SQLLDR CONTROL=D:\GMVS\city.ctl, DATA=D:\GMVS\sorted_city.dat log=D:\GMVS\sorted_log.log USERID="KA31CVLA/KA31CVLA123" DIRECT=Y
Here is the control file details
options (direct=true)
unrecoverable
load data
truncate
into table KA31CVLA.city
sorted indexes (city_PK)
reenable disabled_constraints
fields terminated by "^"
trailing nullcols
(cntry_cd char,
city_nm char,
seq_nbr integer external,
postl_stt_eqnt_cd Char,
latitude integer external,
longitude integer external)
The total records insertd to table but i am getting above error in log files.
The following index(es) on table KA31CVLA.CITY were processed:
index KA31CVLA.CITY_PK was made unusable due to:
ORA-01409: NOSORT option may not be used; rows are not in ascending order
index KA31CVLA.CITY_UQ01 loaded successfully with 29761 keys

TBB1-Execute postings occurs an error *Ledger group 0L may not be used*

Hi everybody,
While trying to execute postings from a commercial paper occurs the following error
Ledger group 0L may not be used
Message no. FAGL_LEDGER_CUST102
Diagnosis
Ledger group &1 is assigned to another application.
I suspect that this is somehow related to Funds management influence, but I can not find the solution,
I really need to overcome this problem so i'll appreciate any help,
Thanks in advance,
Daniel

Hi Prasad,
We created ledger groups in costumizing this issue was solved.
Thank you very much your help.
Regards,
Daniel

Keep getting a pop up at the top of many websites I visit 'firefox security error content at *web address* may not load" I am using the most recent firefox and windows 7.

Keep getting a pop up at the top of many websites I visit 'firefox security error content at *web address* may not load" I am using the most recent firefox and windows 7. This is happening at many sites, such as hotmail, google reader, and many others.

Sorry, I don't think that is a message from inside Firefox, the wording doesn't sound correct - at least the beginning of that message. My "gut" thinks that is a MSN Live message to explain and compensate for their lack of security with a re-direct from a secure domain to an un-secure domain. ''(the end of that message)''
{Ctrl + Shft + J} will open the Firefox Error Console - I'm curious what Firefox has to say about that situation. If you find the error message for that domain, you can right-click the message to '''copy''' it and then paste that error message here.
Maybe '''TonyE''' or '''cor-el''' will be more familiar with the situation at Live and maybe at Google Reader, I don't use either of those services and have never seen a message like that myself.

On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
              Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
             I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                  ThanQ SO very much!
                                                                         [email protected] or [email protected] or [email protected] .
                                                                                           You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                            that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
                                                                                            hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                            as marking this page in my FAVORITES so I can find it fast! Take Care!!!

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

I have a new computer that downloaded all of my playlist. but i cannot play all songs. i get a error that say "the song could not be used because the original file could not be found. would you like to locate it? but it does not help to resolve.

i installed itunes to my new computer and transfered all my playlist from the older computer. the software came with the new computer hp link up. the problem
comes in where i want to play a certain song on a playlist and this error pops up "the song could not be used because the original file could not be found.
would you like to locate it? which is of no help.
is there a solution to this problem?

The file path for these songs IS NOT correct per your iTunes Library file.
See: http://dougscripts.com/itunes/scripts/ss.php?sp=listmias for an Applescript to locate these files for re-adding.

Function 'myfunc' may not be used in SQL Options

<p>
Hello,
I have created a simple function in a packege for use in an update statement. The function is
FUNCTION myfnc(p1 IN t1.c1%TYPE)
RETURN VARCHAR2
IS
BEGIN
IF p1 = 3 THEN
RETURN 'A';
ELSE
RETURN 'B';
END IF;
END myfnc;
I use it in a procedure which exists in the same package as the function as follows
Update t1
set c1 = myfnc(c2);
I am getting the compliation error Function 'myfunc' may not be used in SQL.
There is no db manipulation going on and I have tried using
PRAGMA RESTRICT_REFERENCES (myfnc, WNDS, WNPS, RNDS, RNPS);
but to no avail.
One other thing is that I thought this was compiling OK but then I decided to put the function in the package specification so I could unit test it using a db call. Now if I drop and recreate the package without the declaration in the specification the compile error still occurs. Perhaps that's my mind playing tricks but maybe there is something here I am not aware of.
Any suggestions?
</p>

Hi,
You found the solution.
Although it's allowed to say
Update     t1
set     c1 = local_var;in a package, where local_var is not defined outside of the procedure, let alone the package, and
although it's legal to say:
local_var = myfnc (some_other_var); inside the package where myfnc is a private function (included in the package body, but not in the package header), still
it is not legal to say:
Update     t1
set     c1 = myfnc (c2); If there is a problem with putting myfnc in the package header (for example, you don't want people calling it directly, for some reason), you can make it a stand-alone function, like Someoneelse did, or put in a different package, and give the owner of your first package (and no one else) EXECUTE privileges on it.
As William pointed out, if myfnc is really this simple, you might not need a function at all.

Function name_function may not be used in SQL

Dear forums,
when i compiled my form that contain the function package, i got the error "Function <name_function> may not be used in SQL". But when i execute the function from sql plus, it works smoothly.
What's the solution ?
with great thanks,

Hi Salim,
as far as I understand you you try to use a function that is stored in the form. The select statement is worked on the database where your function is not known. You have to create this function on the database as you did it for using in SQLPlus.
Regards,
Werner

Function may not be use in SQL - PLS-00231

Here is my code,
-- Database 10g Enterprise Edition Release 10.2.0.2.0
declare
v1 varchar2(2000);
function test_func ( v2 varchar2) return varchar2
is
begin
return v2 || 'x' || v2;
end;
begin
-- ok
v1 := test_func('Hello');
--- Error PLS-00231: Function may not be used
--insert into xxxx values test_func(….
select test_func('World') into v1 from dual;
end;
I don’t want to define test_func in database as a stand-alone/package function. Is there any other way in 10G.
Thanks.

Works for me...
SQL> select banner from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Solaris: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL> set serverout on
SQL> declare
2 v1 varchar2(2000);
3 function test_func ( v2 varchar2) return varchar2
4 is
5 begin
6 return v2 || 'x' || v2;
7 end;
8 begin
9 -- ok
10 v1 := test_func('Hello');
11 dbms_output.put_line (v1);
12 end;
13 /
HelloxHello
PL/SQL procedure successfully completed.

Release 1.5, 'enum' is a keyword, and may not be used as an identifier.help

hello
i am working for a MNC and i am trying to build my prduct in JDK1.5 and i am getting this error...
...release 1.5, 'enum' is a keyword, and may not be used as an identifier...
the probelm is that i cant go to 1.4 as my product suports only 1.5 and above ..
give me asolutin as fast as possible...

hello
i am working for a MNC and i am trying to build my
prduct in JDK1.5 and i am getting this error...
...release 1.5, 'enum' is a keyword, and may not be
used as an identifier...
What am I missing? Don't use the 'enum' as a variable name!

"ORA-1715 : UNIQUE may not be used with a cluster index" but why?

"ORA-1715 : UNIQUE may not be used with a cluster index" but why and what "may" means here? Any comments will be welcomed, thank you and best regards;
show rel
release 1002000300
CREATE CLUSTER sc_srvr_id (
srvr_id NUMBER(10)) SIZE 1024;
SELECT cluster_name, tablespace_name, hashkeys,
degree, single_table FROM user_clusters;
CREATE UNIQUE INDEX idx_sc_srvr_id ON CLUSTER sc_srvr_id;
ERROR at line 1:
ORA-01715: UNIQUE may not be used with a cluster index
CREATE INDEX idx_sc_srvr_id ON CLUSTER sc_srvr_id;
SELECT index_name, index_type, tablespace_name
FROM user_indexes where index_name like '%SRVR%' ;
CREATE TABLE cservers (
srvr_id    NUMBER(10),
network_id NUMBER(10),
status     VARCHAR2(1),
latitude   FLOAT(20),
longitude FLOAT(20),
netaddress VARCHAR2(15))
CLUSTER sc_srvr_id (srvr_id);
ALTER TABLE cservers add constraint pk_srvr_id primary key (srvr_id ) ;
SELECT index_name, index_type, tablespace_name
FROM user_indexes where index_name like '%SRVR%' ;
INDEX_NAME                     INDEX_TYPE
TABLESPACE_NAME
IDX_SC_SRVR_ID                 CLUSTER
USERS
PK_SRVR_ID                     NORMAL
USERSdo we really need another pkey index here?

"May" has different meanings, one of which is:
(used to express opportunity or permission)
Metalink note 19067.1 says:
This is not permitted.
... which agrees with the above meaning of it.
Besides these, it does not make any sense to me to create a unique index on a cluster. You can have primary keys in the tables you include in the cluster, it depends on your business requirement. But why do you need a unique index on a cluster?

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
Thanks,
Shellyboo

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Error: "the song...could not be used because the original file not found"?

Has anyone seen and resolved the issue from this error: "The song...could not be used because the original file could not be found"?
Thank you for your help

Yes, with no luck ... But I'm not exactly a computer tech. I searched with spotlight with no results.

See my error : (REP-1272: Column CF_1 may not be used as break Column.)

Similar Messages

Maybe you are looking for

See my error : (REP-1272: Column CF_1 may not be used as break Column.)