See my iphone on a tv

Is there any way to view my Iphone on a TV or Via a projector. I have a cable it will only play videos

Not with an iPhone 3GS.

Similar Messages

  • Itunes wont see my iphone

    I am running itunes 11.1 on Windows 7 Starter (1.6 GHz, 1 GB, 32 Bit System).  My iTunes wil not "see" the iPhone when I plug it in.  It will see
    my kids iPod, but not the phone.   When I run the diagnostics, under "Ports" the check box is red beside "No iPod, iPhone, or iPad found".  I have followed the advice of many forums and tried the following, with no success:
    * Updated iTunes and the Phone
    * Uninstall and Re-Install Itunes
    * Verified that Apple Mobile Device is installed (however, I cant get it to show up under device manager, where the USB ports are listed)
    *  I have stopped and restared Apple Mobile Device
    *  I have done my best to check for thrid party conflicts, and have found none.
    Any other recomendations would be very helpful.
    THanks!

    Cheers guys!
    I had the same issues for weeks and I just couldn't figure out what was happeing after iTunes latest update. FInally figure it out with some help from a post bellow. This is what I did.
    1. Uninstall all the "Apple xxxx" softwares (Apple Aplication Suport, Apple Mobile Support, and Apple Update Software)
    2. Go to the Music/iTunes/ dir and rename all files here as such "xxx-bak" so "iTunes Library-bak" so that your files and iTunes config are not changed during the following step
    3. Uninstall iTunes entirelly.
    4. Reinstall a fresh coppy of iTunes (with your iPhone connected
    5. After installation Delete all new files (those not ending with "xxx-bak" rename tag
    6. Restore all renamed files to their original names/titles by deleting the added "-bak" and run iTunes again - BINGO!!!
    This should do the trick! I hope it works for you guys too!

  • When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

  • How can i see my Iphone IMEI status?

    How can i see my Iphone IMEI status?

    The IMEI number can be seen in Settings/General/About
    You can't see any IMEI status.

  • HT201413 I am running Windows 7, ITUNES 10.6.3.25.  I am unable to see my Iphone/sync my iphone in Itunes.  I have uninstalled all components of Itunes and downloaded the newest version to no avail.  Please help.....Thanks

    I am running Windows 7, ITUNES 10.6.3.25.  I am unable to see my Iphone/sync my iphone in Itunes.  I have uninstalled all components of Itunes and downloaded the newest version to no avail.  Please help.....Thanks 
    I am attaching the Diagnostics data below:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Dell Inc. Inspiron N7010
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0016AA9C0126E318
    Current user is not an administrator.
    The current local date and time is 2012-07-05 11:42:18.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod (5th generation) running firmware version 1.3
    Serial Number:       8L643QK9V9R
    iPhone 4 (CDMA) running firmware version 5.1.1
    Serial Number:       C8RG57F0DDP8
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I did all that HT1925 recommended and it was no help.  My computer still won't recognize my iPhone.  Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

  • ITunes 10.2 Upgrade fix temporary. Fix to iTunes 10.2.2 by uninstall Apple Mobile Device Support and install AMDS from 10.0. Worked only to fail in 5 days. iTunes back to very slow to open and will not see device (iPhone) connected. Sorry

    I was one this site for 20+ Days and found a fix for 10.2.1 when it failed. I Uninstalled all, following other attempts that failed, then installed latest Version from Apple iTunes 10.2.12. I then uninstalled Apple Mobile Device Support (AMDS) and installed AMDS from the older 10.0 version of iTunes. Success it worked. Today, I am now back to old problem, iTnes takes very long time to open and fails to see my device when connected (iPhone). I really only have iTunes for my iPhone no extensive library a few hundred CD's in music location and no podcasts. I have less than 6 moveis and want to update them now. I am willing to lose all in iTunes library if need be just to get computer to see G3 iPhone with iOS 4.2 and let me synch once again. I like security of backup too. It older iTunes may now not support, that too is OK. I still want to get the 3GS (no 4G desires, yet) and do not care if any of it is the latest from Apple as long as it works.

    Hi Erik,
    Your basic suggestion actually worked for me. But this is what I did for others who are having issues removing/installing etc.
    1. Download the latest iTunes 8.2. You should end up with a file iTunesSetup.
    2. If you dont already have WinRAR, download free copy from http://www.rarlab.com/ and install.
    3. Right click on iTunesSetup and choose "Extract" to somewhere you know. eg C:\itunetemp
    4. Open up folder where you extracted iTunesSetup and double-click applemobiledevicesupport.msi
    5. It should ask you if you want to repair or remove... choose remove.
    6. REBOOT your PC.
    7. Go back to where you extracted iTunesSetup and double-click applemobiledevicesupport.msi and go through the install.
    8. Plug in your iPhone.
    If all is well iTunes should automatically start and start syncing your iPhone.
    Goodluck all!
    Cheers.

  • After the latest update I can no longer see my iPhone listed on the left column - how do you get to where you can pick

    After the latest itunes update I can no longer see my iPhone listed on the left column. How can I get to the section where I can pick & choose apps etc to be synced?
    Also I had to get a new iPhone & so I backed up the night before to the cloud & my computer. When I tried to restore from back up with the new phone my back up wasn't there - shouldn't it be automatic via wifi from the cloud?
    What am I doing wrong?

    Your iphone is shown at the top of the page.
    You can also simply click View>Show Sidebar and it will look about the same as it did before.

  • My new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7.  iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

    my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7.  iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

    If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.

  • My computer doesn't "see" my iPhone when plugged in

    First, I have an iPhone 4. I have this new computer and I'm having to re-install all my software. When I click "Add files to library", I don't see my plugged-in iPhone in the list of drives, though I hear Windows 7 *bong* when I plug it in. I don't think this has happened before. Is there some setting I need to adjust or something? I can't transfer anything off my iphone if my computer won't even recognize it. I installed Flash and Java, but neither seem to have anything to do with this problem. Incidentally, I plugged in my external hard drive, and it got recognized fine. I also don't see the iPhone in Windows Explorer as an extra drive or anything.
    I uninstalled iTunes and reinstalled it. I got this error:The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
    I've been researching this issue for two days online. I've uninstalled/installed iTunes four times, and also installed the Gears software that I read was supposed to add drivers or whatever to fix this. That was a bust. I also can't get my computer to recognize my iPhone anymore - it doesn't show up in Windows Explorer or iTunes as a device that's been plugged in.
    I also went into the registry to add a file suggested at the following link, and rebooted - with zero success.
    http://blog.callageek.com.au/2012/03...-when-opening/
    All this is after I had to have a new hard drive reimaged. Before, I transferred between my iPhone and laptop fine. I've been at this for days now and I'm wasting tons of valuable time looking for a solution. To be honest, if I had known Apple's products were so hard to make function, I would have gone with an Android or Galaxy.

    My girlfriend had this same issue.  It ended up being her cable. 
    It was very weird and confussing as the first cable would allow the phone to show up on my laptop but not my girlfriends.  So we thought the cable was fine. 
    Further the first cable would allow the iPhone to sync with itunes on her laptop but not show up in her "My Computer." 
    By chance we tried a different cable and it worked fine on her laptop and instantly showed up in her "My Computer."
    All very weird but try a couple different cables and see if that fixes the problem first before resorting to other time consuming steps. 

  • After updating OS to 10.9.3 iTunes can't see my iPhone over Wi-Fi.

    After updating OS on my Retina MacBook Pro to Mavericks 10.9.3 with iTunes 11.2 I succesfully transfer one album over Wi-Fi to my iPhone 5 with iOS 7.1.1.
    Then I decided to transfer another, but when I drop the albums to iPhone on my iTunes,
    iTunes start to Looking for iPhone and the phone dissapeard.
    I tried to restarting the iTunes and the problem was same. First I saw iPhone connected but when tried to transfer music it dissapeard same way.
    I tryed to restart my MacBook but from there can't see my iPhone anymore.
    I checked that the MBP and iPhone are on same network.
    Thanks for any tips.

    After a while it start to work.... No problems.

  • Windows XP can no longer "see" my iPhone as a camera/imaging device

    can't sync photos from iPhone to computer; Windows XP doesn't even see it as a camera or imaging device. Weird, since iTunes is able to synch music/contacts.
    No matter how I check, Windows XP can't find the device:
    control panel --> scanners and cameras - nothing!
    My Computer --> devices with removable storage - no iPhone
    Computer Management--> Device Manager - no iPhone or scanner/camera

    UPDATE - I think I've resolved my problem and that it is related to having my iPhone "passcode locked".
    1. I connected it and unlocked the iPhone, synced music, but had the problems I noted in my original discussion post
    2. I disconnected the iPhone, closed iTunes, reopened iTunes and reconnected the iPhone (making sure it was NOT passcode locked before connecting it) -- everything works fine.
    3. now I can get back to my original issue, was to figure out how to get only my NEW iPhone captured photos to synch, or at least have them date ordered. But that's a subject for another post.
    BOTTOM LINE - passcode lock may be the key for those who are having problems with their PC not able to see the iPhone as a camera/imaging device

  • How do I see my iPhone or iPad with iTunes 11.0.1.12? Used to show up on side of iTunes.

    When I updated iTunes, it no longer has the side bar where you would see your iPhone in itunes.
    With the new software, you cannot see your device.
    Is there a way to find the device in iTunes or where do I find it?
    I hate to say this, but I am trying to be a fan of Apple, but everytime I move forward with the company, they make things worse.
    Thanks for the help.

    I just restarted iTunes and the phone showed up.
    That only worked one time.
    I closed iTunes and the phone does not show up.
    Message was edited by: ccualumni

  • Itunes can't see my iphone

    Itunes can not see my iphone under the devices.  Recently used Windows Parallel on my Mac but made sure to de-select the USB in the parallels application and clicked associate this device with Mac OS and not the windows os.  I have tried un-installing iTunes, reinstalled with most recent edition.  Recycled the iphone on / off.  Removed the iphone from the docking cradle to direct connection with iphone to usb and no hubs, cradles etc.... in between iphone and computer without any success.  I know the mac and itunes are working correctly because it syncs my ipad, wife's iphone 3gs and kids ipod touch without any trouble.  I looked in the hardware listing in the system preferences and the usb lists my iphone as attached.  With the iphone 4 plugged in I rebooted my mac hoping it would auto open itunes and auto sync but no luck. 

    Hello Barbara4090,
    When the iPhone unmounts from iTunes during the backup phase, it can be due to some unreadable data on the iPhone that iTunes cannot deal with. It could be data saved by a third party APP on the iPhone, but there's no easy way to determine the what data may be causing the issue.
    First try resetting the iPhone by holding down the sleep/power button and home button until you see the Apple logo (ignore the "Slide to Power Off" prompt).
    Connect to iTunes and Sync to test.
    Next would be to determine whether the issue is actually with the iPhone or the MacBook Air.
    You mentioned that you also use an iMac.
    If the iMac is running at least 10.4.11 and has a current installation of iTunes 8.0.2 on it, you can use the iMac to isolate the source of the issue.
    If you have essentially the same information on both computers, you can do this test in the existing user on the iMac.
    If you'd prefer not to intermingle any data from the iPhone you can create a new User on the iMac and test:
    http://support.apple.com/kb/HT3309
    Before connecting the iPhone to the iMac, put a check in the "Disable Automatic Syncing for iPods and iPhones" in the Devices section of iTunes Preferences.
    Connect the iPhone and then right-click or control-click on the iPhone under Devices and choose "Backup."
    If the iPhone cannot be backed up on the second computer, then it is due to some unusable data on the iPhone that cannot be backed up.
    After the test, you can delete the new User if you created one.
    If that is the case, then you may need to restore the iPhone and choose the option to restore from a previous backup at the end of the restore process:
    http://support.apple.com/kb/HT1414
    I would do this on the computer that you normally sync the iPhone with.
    If, on the other hand, the iMac can backup the iPhone successfully, then there is possibly an issue with the MacBook Air or it's software:
    http://support.apple.com/kb/HT1224
    Hope that helps,
    Charles H.

  • My itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

    my itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

    Hi there 3eboo,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • PLEASE HELP!  unable to see my iphone or my ipod either in MY COMPUTER or ITUNES...

    hola...I am sooo fustrated because i have been able to see my iphone or ipod on my computer either in MY COMPUTER or ITUNES...i have followed the directions to properly uninstall, reinstall itunes over 10 times...this all happened when my computer hard drive crashed and i had to get a new one installed.  apfter that, it has NOT wanted to see my apple products...i tunes loads fine but they do not see my product AT ALL.  i can not update my ipod or iphone.  i am beyond fustrated trying to get this done.  i have googled, and searched all over...read numorous articles on what to do and can not understand how this could be!  also i have noticed that even though it says that APPLE MOBILE DEVICE is loaded, i do not see it in the 'MANAGED' area under the USB area at all, even 'hidden' it i not there....i just done' know what to do...ANY ADVICE i would GREATLY appreciated it!!!  thanks so much!

    Could be your security software preventing the devices from being recognized in iTunes. Try disabling a/v software and turn off the Firewall.
    Disable antivirus software
    Turn Windows Firewall on or off

  • I installed iTunes 11.1.5 and it's not "seeing" my iphone 5s that's running IOS 7.1.

    I installed iTunes 11.1.5 and it's not "seeing" my iphone 5s that's running IOS 7.1. I don't know what to do. Am I the only one having this issue? I would like to add some music to my phone, and make a back up copy of my phone to my computer, but I can't do anything.

    Have you tried a couple of USB cables? And are you using the original cable that came with your phone?
    The items in this article would be worth trying.
    Edit: Just saw you got things sorted. Great news!
    ~Lyssa

Maybe you are looking for

  • HTML online editor and accented letter

    Hi all gurus, please forgive the nooby question, I'm a newbie about Portal and I've searched sdn forum without success for the following task. Strictly; I have to publish an HTML file in an iview of the Portal. This task was accomplished quite easily

  • How do I add a second line at home?

    I've been trying to find the answer to this question online and have struck out. Verizon's website says that to add a second line at home you can log into your account, go to "My Profile," click on "Lines & Accounts," and then click on "Add Second Li

  • Non Editable Purchase Order Price

    Hi,  Need a config help for the following scenario: "Vendor Price is fixed for a material. The fixed price is required to flow in PO. User should not be able to change the unit price." Best Regards, Srini

  • Duplicate Entries in Internal table

    Hi All, As per my requirement 1. The internal table is the input. 2. I need the duplicate records of the internal table with the combination of 2 key fields. 3. I should not use SORT because i need the index number in order as per in the table . EX :

  • Im having trouble with deleting photos, help :(

    Hi, well im quite new to this but im having major problems with deleting pictures. Im able to delete the ones i have took from my ipod but cant delete the ones i have synced from the laptop to my ipod. Also i can view them on the ipod and not on the