See my problem no master record move to next record

hi master
sir
i have master detail block master table have all data but detail no data i need feed data in detail then i goto in detail block write value and press F10 for save
for new record in detail
in detail blick post-block or post_record or post_insert event i write this code
go_block('masterblock');
next_record;
go_item('detailblock.item');
but not responses no master block move to next record still and my curser sitll in last postion
sir how i move master record after save the detail record and jump to detail block for new record
please give me idea or code
thanking you
aamir

thank for reply
sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
sir how i avoid that window and directly move to next record
please give me idea
thanking you
aamir

Similar Messages

My code not give me result and error for move to next record please see

hi master
sir i import this file also
import javax.faces.event.ValueChangeEvent;
then my error remove
i am use this code in button event
getMfatableDataProvider().cursorNext();
form1.discardSubmittedValues("virtualForm1");
and my textField is bounded with data provider table field
please give me idea how i show next rocord in page when user press button
thank's
aamir

thank for reply
sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
sir how i avoid that window and directly move to next record
please give me idea
thanking you
aamir

Move to next record / wildcard search

Hi
Hope you can understand this explanation..
I have searchable database for Holiday & Residential
property here
http://www.roomtobreathesl.com
(search facility in the navigation menu)
The results page for this search works fine for when you
specify a certain
area, certain amount of beds etc as it only shows a small
amount of
properties.
However when you do a search for any area / any amount of
rooms / any type,
the query brings up over 40 results, so a move to next record
is used. This
is where the problem lies. You cannot move to next record as
the 'Next
record' link is looking for another wildcard search (see
status bar).
Any ideas how to remedy this?
Thanks for any help
Gary

oops!
Sorry sent you the previous version that's online.
I also tried doing a search and replace and changing all
'Request.Form' to
'Request'
Still didn't work.
This is how it was when it wasn't working.
<%@LANGUAGE="VBSCRIPT"%>

<%
Dim rsResults__MMColParam
rsResults__MMColParam = "1"
If (Request("yscon") <> "") Then
rsResults__MMColParam = Request("yscon")
End If
%>
<%
Dim rsResults__ysbed
rsResults__ysbed = "1"
If (Request("ysbed") <> "") Then
rsResults__ysbed = Request("ysbed")
End If
%>
<%
Dim rsResults__MMColParam3
rsResults__MMColParam3 = "xyz"
If (Request("type") <> "") Then
rsResults__MMColParam3 = Request("type")
End If
%>
<%
Dim rsResults
Dim rsResults_numRows
Set rsResults = Server.CreateObject("ADODB.Recordset")
rsResults.ActiveConnection = MM_YotShop6_STRING
rsResults.Source = "SELECT * FROM YotStock WHERE Area LIKE '"
+
Replace(rsResults__MMColParam, "'", "''") + "' AND bedrooms
LIKE '" +
Replace(rsResults__ysbed, "'", "''") + "' AND type LIKE '" +
Replace(rsResults__MMColParam3, "'", "''") + "' ORDER BY
price ASC"
rsResults.CursorType = 0
rsResults.CursorLocation = 2
rsResults.LockType = 1
rsResults.Open()
rsResults_numRows = 0
%>
"Julian Roberts" <[email protected]> wrote in message
news:euj4if$ici$[email protected]..
>>> Use Request instead of Request.Form for runtime
parameters.
>
> You haven't done it :)
>
> --
> Jules
>
http://www.charon.co.uk/charoncart
> Charon Cart 3
> Shopping Cart Extension for Dreamweaver MX/MX 2004
>
>
>
>

Move to next record in a LOOP!

I have to perform a loop on an internal table consisting of several records.
within the LOOP there is an if-endif condition followed by some code.
Now, in the else condition of the if-endif part, i have to move to the next record (i.e. next record in the internal table)...If i use "Exit",the entire loop processing is skipped, but i just want to skip the current sy-index and loop for the next record in the internal table.
Please suggest some way to do it.

loop at itab.
if <condn>.
else.
continue.
endif.
endloop.
continue will process the next loop from begining i.e. after continue it will go to the loop at itab statement for next loop pass.
regards
shiba dutta

Help: Data validation before commit or move to next record

The form that I am working on allows data insert. It needs to have a feature to inform the end user for incomplete field(s) before commit_form or move to next record for updating. Please let me know how you would do it.
Thank you,
Jimmy

To prevent cursor movement out of a field in a When-validate trigger, all you do is Raise Form_trigger_failure;However, if the field is null and the user does not enter anything while tabbing through, or just clicking in then clicking somewhere else, the When-validate-item trigger does not run. You have to specifically check if the field is null in the When-validate-record trigger.

How to move to next record in PHP+ORACLE env

I install php3 +ORACLE in RH linux 6 box, the works fine.
I write a app to browse record in oracle table,I write two
frame, one top_frame,one body_frame,but How can I to move to
next record?
thanks any idea!!
null

one record item at a time...

Move to next record

move to next record wont work with tom-muck horizontal repeat
region anyone got an alternative or know why its throwing back
errors

i got it workin sorry for wasting your time

Update and move to next record

Sorry if this is a simple question.
I have a form that links to an access database. The page
calls the fields and there is no problem.
I want to be able to have users check the database
information, and make any changes and then update and move to the
next record.
In the update button wizard it asks for a page to go to once
updated - I just need it to move forward.
Thanks for any help.

Hi,
I am not clear what you said. But I assume you mean to say:
Right after comming in your if statement you want to update the record first and then you need the validation?? If this is right then you have to move the validation just after the update statement and then print a message just before "END IF".
HTH
Ghulam Mustafa Butt

How to move to next record of the databank file using custom code

hi,
can someone please tell me how to move to next or the previous record the Databank file. i found a funtion setcurrentdatabankrecord(), but i am not able to use it.
thanks in advance...

Hi,
I recently had the same problem, here's my solution:
"setCurrentDataBankRecord" is available only to External Program Control.
I used the VB of an empty Word2002 Document.
1. you have to reference the webAnlyst.exe in the object-catalogue
2. create a module via the menue
3. type in the code
This is the code I used - some of the code is just for control
Private Sub TestSetDBRec()
Dim pdtest As webanlst.ProgT
Set pdtest = New webanlst.ProgT
Dim currDBI, numRecsCurrDB As String
' Workspace öffnen
pdtest.play.OpenWorkspace "VBTest"
' Script öffnen
pdtest.play.openScript "BM2B_VK_Änderung"
' DB-Abfragen
numRecsCurrDB = CStr(pdtest.play.getDataBankSize)
currDBI = pdtest.play.currentDatabankIndex
pdtest.play.setCurrentDataBankRecord (2)
currDBI = pdtest.play.currentDatabankIndex
' jetzt das Script abspielen
pdtest.play.doScript "BM2B_VK_Änderung"
End Sub
This works! You can also looping through the database by getting the current value and set the value back increased by e.g. one
Hope it is helpful!

HCP tcode PA40 Upload program failing to move to next record.

Dear All
I have written and upload program for HCM tcode PA40 and the program is fine but only inserting one record and is failing to pick the next records in a loop. I dont know whats the problem i know the process have many screens, please help me, i have tried to research not yet found the answer yet.
Thank you for your assistance
Here is my Upload program
*& Report ZUPLOADEMPHIRING
REPORT ZUPLOADEMPHIRING.
include bdcrecx1.
PARAMETERS: p_file TYPE rlgrap-filename.
           x_endrow TYPE i .
DATA: xdate(10).
DATA: Fullname type string.
DATA:        x_begrow TYPE i VALUE 2,
            x_begcol TYPE i VALUE 1,
            x_endcol TYPE i VALUE 17,
             x_endrow TYPE i VALUE 3.
TYPES: BEGIN OF t_datatab ,
        FromDate(10),
        Reasonforaction(2),
        Position(8),
        PersonalArea(4),
        EmployeeGroup(1),
        EmployeeSubGroup(2),
        SubArea(4),
        PayrolArea(2),
        Title(5),
        Lastname(40),
        Firstname(40),
        BirtDate(10),
        Nationality(3),
        Group(1),
        Level(1),
        BankKey(15),
        BankAccount(18),
       END OF t_datatab.
DATA: BEGIN OF t_datatabfinal OCCURS 0,
        FromDate(10),
        Reasonforaction(2),
        Position(8),
        PersonalArea(4),
        EmployeeGroup(1),
        EmployeeSubGroup(2),
        SubArea(4),
        PayrolArea(2),
        Title(5),
        Lastname(40),
        Firstname(40),
        BirtDate(10),
        Nationality(3),
        Group(1),
        Level(1),
        BankKey(15),
        BankAccount(18),
      END OF t_datatabfinal.
DATA: BEGIN OF it_record OCCURS 0,
        FromDate(10),
        Reasonforaction(2),
        Position(8),
        PersonalArea(4),
        EmployeeGroup(1),
        EmployeeSubGroup(2),
        SubArea(4),
        PayrolArea(2),
        Title(5),
        Lastname(40),
        Firstname(40),
        BirtDate(10),
        Nationality(3),
        Group(1),
        Level(1),
        BankKey(15),
        BankAccount(18),
        END OF it_record.
DATA: itab LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE,
gd_currentrow TYPE i,
it_datatab TYPE STANDARD TABLE OF t_datatab,
wa_datatab TYPE t_datatab.
AT SELECTION-SCREEN on VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME' "
   EXPORTING
     FIELD_NAME          = 'P_FILE '
   IMPORTING
     FILE_NAME           = p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
    PROGRAM_NAME        = SYST-REPID
    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = ' '
    STATIC              = ' '
    MASK                = ' '
   CHANGING
     FILE_NAME           =
EXCEPTIONS
    MASK_TOO_LONG       = 1
    OTHERS              = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename    = p_file
      i_begin_col = x_begcol
      i_begin_row = x_begrow   "Column header not required
      i_end_col   = x_endcol
      i_end_row   = x_endrow
    TABLES
      intern      = itab.
Sort table by rows and colums
SORT itab BY row col.
Get first row retrieved
READ TABLE itab INDEX 1.
Set first row retrieved to current row
gd_currentrow = itab-row.
clear: t_datatabfinal.
refresh t_datatabfinal.
LOOP AT itab.
Reset values for next row
    IF itab-row NE gd_currentrow.
      APPEND wa_datatab TO t_datatabfinal.
      CLEAR wa_datatab.
      gd_currentrow = itab-row.
    ENDIF.
    concatenate sy-datum6(2)'.' sy-datum4(2)'.' sy-datum+2(4) into xdate .
    CASE itab-col.
      WHEN '0001'.
        wa_datatab-FromDate = itab-value.
       concatenate wa_datatab-DocumentDate6(2)'.' wa_datatab-DocumentDate4(2)'.' wa_datatab-DocumentDate+2(4) into wa_datatab-DocumentDate.
      WHEN '0002'.
        wa_datatab-Reasonforaction     = itab-value.
      WHEN '0003'.
        wa_datatab-Position = itab-value.
      WHEN '0004'.
        wa_datatab-PersonalArea    = itab-value.
      WHEN '0005'.
        wa_datatab-EmployeeGroup    = itab-value.
      WHEN '0006'.
        wa_datatab-EmployeeSubGroup   = itab-value.
      WHEN '0007'.
        wa_datatab-SubArea         = itab-value.
      WHEN '0008'.
        wa_datatab-PayrolArea         = itab-value.
      WHEN '0009'.
        wa_datatab-Title         = itab-value.
      WHEN '0010'.
        wa_datatab-Lastname         = itab-value.
      WHEN '0011'.
        wa_datatab-Firstname         = itab-value.
      WHEN '0012'.
        wa_datatab-BirtDate         = itab-value.
      WHEN '0013'.
        wa_datatab-Nationality         = itab-value.
      WHEN '0014'.
        wa_datatab-Group         = itab-value.
      WHEN '0015'.
        wa_datatab-Level         = itab-value.
      WHEN '0016'.
        wa_datatab-BankKey         = itab-value.
      WHEN '0017'.
        wa_datatab-BankAccount         = itab-value.
      WHEN OTHERS.
    ENDCASE.
   APPEND    wa_datatab to t_datatabfinal.
ENDLOOP.
clear: it_record.
refresh it_record.
loop at t_datatabfinal into it_record.
    append it_record.
endloop.
perform open_group.
loop at it_record.
    concatenate it_record-Firstname it_record-Lastname into Fullname separated by space.
    perform bdc_dynpro      using 'SAPMP50A' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'T529T-MNTXT(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PICK'.
    perform bdc_field       using 'RP50G-EINDA'
                                  it_record-FromDate. "" '01012012'.
    perform bdc_field       using 'RP50G-SELEC(02)'
                                  'X'.
    perform bdc_dynpro      using 'MP000000' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'PSPAR-PERSG'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPD'.
    perform bdc_field       using 'P0000-BEGDA'
                                  it_record-FromDate. "" '01.01.2012'.
    perform bdc_field       using 'P0000-ENDDA'
                                  '31.12.9999'.
    perform bdc_field       using 'P0000-MASSN'
                                  'ZB'.
    perform bdc_field       using 'P0000-MASSG'
                                  it_record-Reasonforaction. "" '01'.
    perform bdc_field       using 'PSPAR-PLANS'
                                  it_record-Position. "" '99999999'.
    perform bdc_field       using 'PSPAR-WERKS'
                                  it_record-PersonalArea.   " 'm003'.
    perform bdc_field       using 'PSPAR-PERSG'
                                  it_record-EmployeeGroup. "" 'a'.
    perform bdc_field       using 'PSPAR-PERSK'
                                  it_record-EmployeeSubGroup. "" '02'.
    perform bdc_dynpro      using 'MP000100' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'P0001-BTRTL'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPD'.
    perform bdc_field       using 'P0001-BEGDA'
                                  it_record-FromDate. ""'01.01.2012'.
    perform bdc_field       using 'P0001-ENDDA'
                                  '31.12.9999'.
    perform bdc_field       using 'P0001-BTRTL'
                                  it_record-SubArea.        "" 'mm01'.
    perform bdc_field       using 'P0001-ABKRS'
                                   it_record-PayrolArea.    "" 'Z2'.
    perform bdc_field       using 'P0001-PLANS'
                                  it_record-Position. ""'99999999'.
    perform bdc_dynpro      using 'MP000200' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'P0002-NATIO'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPD'.
    perform bdc_field       using 'P0002-BEGDA'
                                  it_record-FromDate. ""'01.01.2012'.
    perform bdc_field       using 'P0002-ENDDA'
                                  '31.12.9999'.
    perform bdc_field       using 'Q0002-ANREX'
                                  it_record-Title. "" 'Mr'.
    perform bdc_field       using 'P0002-NACHN'
                                  it_record-Lastname. " 'maxwel'.
    perform bdc_field       using 'P0002-VORNA'
                                  it_record-Firstname. "" 'razaro'.
    perform bdc_field       using 'P0002-GBDAT'
                                  it_record-BirtDate. "" '01011970'.
    perform bdc_field       using 'P0002-SPRSL'
                                  'EN'.
    perform bdc_field       using 'P0002-NATIO'
                                   it_record-Nationality. "" 'ZW'.
    perform bdc_dynpro      using 'MP000700' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'P0007-BEGDA'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'P0007-BEGDA'
                                  it_record-FromDate."" '01.01.2012'.
    perform bdc_field       using 'P0007-ENDDA'
                                  '31.12.9999'.
    perform bdc_field       using 'P0007-SCHKZ'
                                  'MANORM'.
    perform bdc_field       using 'P0007-ZTERF'
                                  '9'.
    perform bdc_field       using 'P0007-EMPCT'
                                  ' 100,00'.
    perform bdc_dynpro      using 'MP000700' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'P0007-BEGDA'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPD'.
    perform bdc_field       using 'P0007-BEGDA'
                                  it_record-FromDate.""'01.01.2012'.
    perform bdc_field       using 'P0007-ENDDA'
                                  '31.12.9999'.
    perform bdc_field       using 'P0007-SCHKZ'
                                  'MANORM'.
    perform bdc_field       using 'P0007-ZTERF'
                                  '9'.
    perform bdc_field       using 'P0007-EMPCT'
                                  ' 100,00'.
    perform bdc_field       using 'P0007-ARBST'
                                  '    8,00'.
    perform bdc_field       using 'P0007-WKWDY'
                                  '    5,00'.
    perform bdc_dynpro      using 'MP000800' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'P0008-TRFST'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPD'.
    perform bdc_field       using 'P0008-BEGDA'
                                  it_record-FromDate. "" '01.01.2012'.
    perform bdc_field       using 'P0008-ENDDA'
                                  '31.12.9999'.
    perform bdc_field       using 'P0008-TRFAR'
                                  '01'.
    perform bdc_field       using 'P0008-BSGRD'
                                  '100,00'.
    perform bdc_field       using 'P0008-TRFGB'
                                  '01'.
    perform bdc_field       using 'P0008-TRFGR'
                                   it_record-Group. ""'a'.
    perform bdc_field       using 'P0008-TRFST'
                                   it_record-Level.         "" '1'.
   perform bdc_field       using 'P0008-DIVGV'
                                 '173,00'.
    perform bdc_field       using 'P0008-ANCUR'
                                  'USD'.
    perform bdc_field       using 'Q0008-IBBEG'
                                  xdate.""'12.01.2012'.
    perform bdc_field       using 'P0008-WAERS'
                                  'USD'.
    perform bdc_dynpro      using 'MP000900' '2000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'P0009-ZLSCH'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPD'.
    perform bdc_field       using 'P0009-BEGDA'
                                  it_record-FromDate. ""'01.01.2012'.
    perform bdc_field       using 'P0009-ENDDA'
                                  '31.12.9999'.
    perform bdc_field       using 'P0009-BNKSA'
                                  '0'.
    perform bdc_field       using 'Q0009-EMFTX'
                                  Fullname. "" 'maxwel razaro'.
    perform bdc_field       using 'P0009-BANKS'
                                  'ZW'.
    perform bdc_field       using 'P0009-BANKL'
                                   it_record-BankKey.       ""'10351'.
    perform bdc_field       using 'P0009-BANKN'
                                   it_record-BankAccount. "" '543234667778'.
    perform bdc_field       using 'P0009-ZLSCH'
                                  'b'.
    perform bdc_field       using 'P0009-WAERS'
                                  'USD'.
    perform bdc_dynpro      using 'SAPMP50A' '2000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBCK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RP50G-PERNR'.
    perform bdc_transaction using 'PA40'.
endloop.
perform close_group.
Regards
William

Hi,
It seems like you are uploading data to a screen that contains table control.just check the link below for your reference
[http://wiki.sdn.sap.com/wiki/display/ABAP/bdcontable+control]
Regards,
Vamshi
Edited by: vamshi reddy . ch on Jan 13, 2012 7:38 AM
Edited by: vamshi reddy . ch on Jan 13, 2012 7:39 AM

No required validation windows wnen move next record

Hi master
Sir I have master detail block
In master block key-commit I put this code
if :ystatus ='P' then
     message('Can not be update becuase this year Completely Closed');
     message('Can not be update becuase this year Completely Closed');
     go_item('voumaster.entdate');
elsif :ystatus ='T' or :ystatus ='N' then
commit_form;
go_item('voudetail.accid');
end if;
means if condition true then commit other wise not commit
and in detail block I put this code in key-commit event
if :ystatus ='P' then
     message('Can not be update becuase this year Completely Closed');
     message('Can not be update becuase this year Completely Closed');
     go_item('voumaster.entdate');
elsif :ystatus ='T' or :ystatus ='N' then
     IF :ITEM62=:ALLTOTAL THEN
     commit_form;
     go_item('voumaster.entdate');
     ELSE
     MESSAGE ('RECORD NOT SAVE BECUSE DEBIT AND CREDIT NOT BALANCE');
          go_item('voDETAIL.CREDIT');
     END IF;
end if;
sir when I change in master block then system not give me error then check condition if true then save otherwise move entdate textbox
but
when I change in detail block and press F10 then system not give me error and move entdate textbox but when I change record or go next previous record then system give me error do you want to save then change you have made?
Yes no cancel Button
Sir my need is system not required this message and easily go to next record only when I press f10 then show message and save my record
Please give me idea where I put my code or which event I disable
Thank
Aamir

thank for your reply
sir i use your code
message('Can not be update becuase this year Completely Closed');
pause;
but not sovle my problem
sir my problem is when i change in detial block and go to master block without save detail block in master block i move to next record then system give me save validation windows
i not need validation window when move mext record and move next record without save detail block
please give idea
thak
aamir

Problem in moving to next record in For Loop end loop construct

Hi friends i have the followind code in my stored proc. I am reading each row in the temprec and then based on the variable "i_copy_notes" processing the record. If the value of the I_copy_notes" varialble is 1 then i need to move to next record. when I am using "Next" then the compiler is telling me that the "NEXT" must be declared. Please advise.
FOR TEMPREC IN
SELECT
DP_SER,
GRD_POS,
TS_POS,
ASG_ID,
DESCS,
GRD_ID
FROM DCGRD_POS
WHERE CLLI = i_FROM_CLLI AND SUBSYS = i_SUBSYS AND BAY_ID = v_OLD_BAY_ID ORDER BY GRD_ID
LOOP
IF v_OLD_GRDID = TEMPREC.GRD_ID THEN
v_NEW_GRDID := v_NEW_GRDID;
IF i_COPY_NOTES = 1 THEN
Next;
END IF;
ELSE
v_OLD_GRDID := TEMPREC.GRD_ID;
SELECT DCGRD_POS_GRD_ID.NextVal INTO v_NEW_GRDID FROM DUAL;
END IF;
INSERT INTO DCGRD_POS VALUES
i_TO_CLLI,
DCGRD_POS_ROW_SER.NextVal,
TEMPREC.DP_SER,
v_NEW_GRDID,
v_NEW_BAY_ID,
TEMPREC.GRD_POS,
DECODE(i_COPY_NOTES,1, TEMPREC.TS_POS,''),
TEMPREC.ASG_ID,
DECODE(i_COPY_NOTES,1,TEMPREC.DESCS,'UASGN'),
i_CURRENT_ISSUE,
-1,
i_SUBSYS,
SYSDATE,
i_USERID
END LOOP;
Line # = 315 Column # = 10 Error Text = PLS-00201: identifier 'NEXT' must be declared
Line # = 315 Column # = 10 Error Text = PL/SQL: Statement ignored
----------------------------------------------

Personally, I'm not a big fan of this technique but you can use a goto ...
begin
for i in 1.. 10 loop
   if i < 5 then
     goto end_of_loop;
   end if;
   dbms_output.put_line(i);
   <<end_of_loop>>
   null;
end loop;
end;

Next Record in System Form

Hi All,
How I can move to next record (when a condition applies)?
In other words I need the object (or sample code) that perfoms the "Next Record" in navigation menu.
Thanks All,
Vangelis

Hello,
use following statement
SBO_Application.ActivateMenuItem("1288")
where SBO_Application is the UI API application object.
Rahul

Next record Error in Tomcat deployment of business component

I built a simple business component project for Dept in Scott table. I created a JSP client, mainly following the tutorial in Jdeveloper. Then I ran main.jsp in JDeveloper. This ran fine. I selected the deptview. I was able to scroll through department using next record arrow.
I deployed this application in Tomcat using the deployment profile as webapplication to web sever. When I run this, the main.jsp runs fine. I am also able to go to the deptview. When I try to scroll through the records using the next record arrow the top portion says page can not be found. Insert record works fine.
When I select insert record it seems to go to http://localhost:8080/sssdept1/jspsdept1_html/DeptView_Insert.jsp.
When I try to use the next record arrow it seems to go to http://localhost:8080/jspsdept1_html/DeptView_Top.jsp?DeptView_NAVIGATE=NEXT.
I think that this path is missing the sssdept1 folder. I am not sure how to add this to the usebean. Can anybody help?

Can you be more specific?
Which JSP page?
Should I work in Jdeveloper or in the created files?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jdeveloper:
Try setting the target URL in the NavigatorBar WebBean within the page. The problem here is that the URL information has been lost. Use the setTargetUrl(String sUrl) method in your JSP page.
<HR></BLOCKQUOTE>
null

Can not see the device net Master Interface in my project.

Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk?

See my problem no master record move to next record

Similar Messages

Maybe you are looking for