See page variable ?

Let's say you have an image on page 9 of your document, and on page 2 you wish to include the following statement:
"A specimen of Africanus Bumblebeus can be found on page 9"
Then you need to delete a few paragraphs in your document and now the image that used to be on page 9 is on page 8.  But...the statement referring to the image being on "page 9" is still on page 2.  Obviously this is not good.  Is there a way to insert a variable in my sentence on page 2 that would be linked to the page of a specific image or marker that would provide the current page number where that image/marker currently resides?
Thanks.

Assuming your image has some type of unique paragraph tag associated with it, like a Figure or Illustration that titles it as an Africanus Bumblebeus, you'd insert a Cross Reference (not a variable) in your text that's aimed at the Africanus Bumblebeus Figure paragraph tag. Pick a Cross Ref format that simply provides the page and you're done -- it'll track no matter where the page (and tag) holding the illustration ends up.

Similar Messages

  • Unable to see the variable in Query Designer

    Hello Experts,
    I am running one report and it is showing me 0calday variable selection screen at run time. I am unable to see this Variable on my Query designer but when I am opening query properties its showing me in this.
    Kindly let me know where is this Variable using in my query designer ?
    Thanks,
    Anoop

    Hi Anoop,
    The variable is probably being used to restrict a key figure.
    Go to the key figures,
    Display the technical names
    Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
    Here you will see one of the key figure being restricted by a variable for 0calday
    Hope this helps.
    Regards,
    Joe
    Didnt notice the question is answered :P
    Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

  • Unable to see system variable no in sap b1 due to watch

    Dear Sir,
    In SAP B1
    I am generating report Customer Aging Report.
    In PLD   Customer Code is displaying buy i am unable to display customer name in PLD because when i am unable to see
    system variable number.
    The watch cover that variable no. how can i find system variable no.
    is there any other method to see system variable no.

    Hi,
    what you are seeing in system-> status is not the installation number that is the status of your system's SAP License
    when you have not installed the license properly after the installation, it shows the status as initial
    go to SM51
    there you can find the instance number along with the Hostname_SID_InstNumber of your server
    thanks and regards
    Abdul Hadi

  • Can I see Pages presentation on my TV using Apple TV?

    Can I see Pages presentation on my TV using Apple TV?

    Welcome to the Apple Community.
    No.
    You can however export them to a movie (if appropriate), assuming they are exported to the correct movie format the Apple TV can then play them.

  • Insert into multiple tables using a page variable

    Hi Guys,
    I was going to trawl the PL/SQL forum for this but as I need to use a page variable I thought I would try here first.
    I have 4 tables 2 live and 2 archive, company_table, company_table_arch, product, product_arch the tables are set up with a company Id as the join.
    you can have multiple products to a company.
    what I want to do is have an archive button on a form that will select the current record on the company table, and insert it into archive then select all records with that id in the product table and insert them into the product_arch table.
    I was thinking about doing this as a couple of page proccess, sound about right?
    the other option was using a package,
    is it possible to use page variables in a package? If so what is the sintax
    cheers
    Bjorn

    OK, I have got the basis of this working I press the archive button and the records update as per the code.
    I have one problem however.
    The button is on a form. and if the user updates the form then presses the archive button it copies the data before the table is updated (the table is updated using a save button).
    One way round this would be to jump to an "are you sure?" page
    Does anyone know a better way of doing this?
    cheers
    Bjorn

  • How to see page ends/page breaks in JTextPane?

    Hi guys!
    I have a JTextPane with HTMLEditorKit.
    can i make possible for user to see page ends in document?
    If i'm not wrong it's related with ViewFactory, but how to do it?
    and is that possible at all?
    thank you

    Unfortunately you are right. It's impossible with HTML.
    I just needed to see the page ends like for ex. in MSWord.
    So, it seems there is also no way to do something with headers and footers...
    I'm developing the text editor that supports image inserts. I tried RTFEditorKit first, but it seems to be unfinished and there is also no support of images. So i decided to use HTMLEditorKit.
    And one question:
    I understand - HTML page is one whole page, but how desired page numbers are printed using PrintDialog? when i'm giving pages 1,3,5, How can system get page ends?
    So can i get somehow where the A4 page ends and starts the next one?
    thenks

  • Error when trying to see pages in webcenter app with adf security activated

    Greetings
    I have this problem
    I developed a WebCenter Application that uses ADF Security with form authentication. This App has
    two JSPX the first one is the login page and the second one is the page where i manage runtime created pages
    using the CREATE PAGE task flow and a page tree iterator to see my created pages.
    when i deploy de application on the weblogic server i am able to login successfully and create as many pages as
    i want and also see them using the link generated. the problem is that when a delete the application from the weblogic
    server, i mean the deployed application, then redeploy the same application on the server i can login again and
    see the pages i created before but when i try to reach them i get this error showed in my internet browser:
    Error 401--Unauthorized
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.2 401 Unauthorized
    The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46)
    containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization
    header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that
    authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response,
    and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was
    given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained
    in section 11.
    Does anybody now what kind of configuration i am missing or what is happening?
    thanks for your help

    this issue has a solution showed on the this thread Re: ERROR when trying to see pages created with create page task flow

  • How to see selection variable in BEX WEB ANALZYER

    Hi,
    I'm not able to see the  values of selection variables in bex web analyzer report. pls help.

    Thank you for your response. But it didn't work.
    I am able to go to 'lay out' option in bex analyzer and set 'display text variables' to All so that I can display all the variables in report.  Is there any similar option available in bex web analyzer.
    I am able to see the variable selection parameters I have selected in 'INFORMATION' tab of web analyzer. But I would like to see the same variables on 'data analysis' tab.
    Do I need to change any setting in order to display filter values that are entered during run time of the report.

  • How can I see page size?

    How can I see page size of the open document?

    This functionality is not available in Adobe Reader for Android. Could you please let us know how and why you would you like to see this feature so that we could add it to our product backlog?
    Thanks,
    Adobe Reader Team

  • I keep getting an "Oops! You can't see pages on this website" because it is not on the approved list in parental controls

    When trying to access a website I have accessed a thousand times, I get a message that says "Oops! You can't see pages on this website." It goes on to say that it is because it is not on the approved list in parental controls. I have never made a list for parental controls because I am the only one to use this computer and I am an adult!

    llneeners wrote:
    I have accessed this website always. Just a few days ago.
    I am the only one who uses this computer and I am long past parental control days.
    Have you checked to see if Parental Controls has somehow been enabled? What do you see when you open the Parental Controls panel in System Preferences?
    It wants me to enable the website by putting in my apple ID
    Can you provide a screenshot of the exact message? Make a screenshot by following the directions here:
    http://support.apple.com/kb/HT5775
    Be sure no sensitive personal information is displayed. To add that image to a post here, click the camera icon in the post editor toolbar, or just drag the image file into the post editor.
    Off the top of my head, my guess would be that you have iCloud Keychain turned on, and have saved a password for the Zulilly site. This would result in a prompt for your iCloud/Apple ID password, so the password could be auto-filled in the login form. See:
    Frequently asked questions about iCloud Keychain - Apple Support
    https://www.apple.com/support/icloud/keychain/

  • Can't see member variables when debugging with jrockit

    Hi all,
    I'm using WLS 8.1.4 with jrockit and trying to do remote debugging while connecting from IntelliJ Idea 4.5.4. Everything works fine except that I can't see a class's member (or instance) variables in the debugger. I can see static and local variables, step through the code, etc. If I switch to Sun's jvm that came with WLS (1.4.2 05) I can see member variables. Is there a setting to change this or is it a known issue? I'm using -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=5005,suspend=n as my startup args.
    thanks

    I just check with IntelliJ support on this issue. They say that its a known issue with IntelliJ 4.5. According the them a fix has been implemented and debugging of member variables is possible in IDEA 5.x versions.

  • Unable to see local variable values when debugging java

    Hi,
    I am using JDev 10.1.2 with java version 1.4.2_04.
    I have been using JDev to debug my java programs. But suddenly from this morning I am unable to see local variable values. I am able to see class and instance variables. This has happened to me before and I had restarted my machine couple of time, to get this sorted. But this time, nothing helps. Going thru the forum I found out that Include Debug information (Project Properties -> Compiler Option) need to be turned ON. It is already turned ON for me.
    I would greatly appreciate if you could let me know how to crack this problem.
    Thanks in advance.

    No. The local variables 'used' to show up during debugging. But erratically it doesn't show up local variable values. I had to restart my machine couple of times whenever this happens, inorder to see the local variable values. But this time even restarting doesn't help.
    Is there any preference setup that need to be turned on/off to see local variables?
    Also I can't step into a static method now. Any idea why this happens?

  • HT4623 how can I see pages from my iphone 5 on my pc?

    How can I see pages from my iphone 5 on my pc?

    What does "Pages from my iPhone 5" mean?
    If it means documents from the Pages app, you can probably convert them to Microsoft Word.
    If it means screen shots, you can find them once you sync your iPhone.

  • I can see pages in safari why?

    sorry i cant speak much english, but my problem is here, i cant see pages in safari, only facebook y apple why?

    I think you are asking, "Can I block **** pages in Safari on my iMac?" If that is correct, yes please look at System Preference - Parental Controls

  • When I open the Page Thumbnails panel, all the document's thumbnails are blank.  How do I restore the ability to see page material in Page Thumbnails?

    When I open the Page Thumbnails panel, all the document's thumbnails are blank.  How do I restore the ability to see page material in Page Thumbnails?

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

Maybe you are looking for