See the user's hostname when doing transactions at any given time.

Hi SAP Experts,
I want to see the hostname it used the user when the user is executing a transaction at a particular date and month. And current condition Security Audit not active. Can I see this? I can see on tCode ST03N (1 month ago), but I can't see detail the hostname.
Do I need to enable Security Audit (SM19) if I want to track user activity? Is it necessary for security reasons?
Please advice for active strategy schedule Security Audit because if it is activated storage will fill up quickly.
Thanks,
Marjan

Hi Marjan,
Without enabling the Security Audit, You can't find the required details like hostname/Terminal, User, Tcode/Report... Use SM19 to enable the Audit functionality and check for information in SM20.
Yes, Definitely storage will fill up if you activate this functionality but it will helps you alot.
If you are using Production Server, you must enable for security and audit purpose.
You can activate for Development, Quality and Test purpose systems, if required otherwise no need..
Ask me if you have any queries..
Regards
Santosh K

Similar Messages

What type of license should the user be assigned when passing transactions through the DI Server?

What type of license should the user be assigned when passing transactions through the DI Server?
We used to assign indirect access licenses to users that were just using the DI Server. We have one add-on developer that says that the user has to be a Profession license. Current environment is SAP B1 9.0 PL10. My understanding was that you could have up to 10 users assigned to a single DI Server license.

Hi,
From the license guide,
Indirect Access – has access to any SSP solutions (developed with the SAP Business One DI-API) only. The Indirect Access license is bundled with the DI server. Users who have an Indirect Access license can access a limited number of application forms, but cannot perform any functions with the SAP Business One application. Users who have an Indirect Access license can access an unlimited number of SSP solutions
Thanks & Regards,
Nagarajan

To find the User Exits for a particular Transaction.

hi,
    I want to find the number of User Exits for a The Transaction MM01 or MM02,
    I serched in the forums but could not find satisfactory ans,
    I tried with:
             T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
    But its not helping me,
    Please help me.
Thanks and Regards
Suraj S Nair.

hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
*              http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Regards,
Prabhudas

I used to be able to open a second tab to get to another web site without closing the first one....now I can see the second tab but when I click on it nothing happens...

I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbARCD/3.13.1.18107
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Why dose not see the call waiting notification when other party in a call with some one ?

why dose not see the call waiting notification when other party in a call with some one ?

Because that is not a feature of the iPhone (or of most phones). If someone does not answer when you call, it means they do not want to or cannot talk to you at that time. They could be on another call or they could be simply busy doing something else. Why does it matter which?

Hi everyone, I have problems with the notification, in a few app I don't see the red circle even when I do have notifications in it.

Hi everyone, I have problems with the notification, in a few apps I don't see the red circle even when I do have notifications in it.

You'll get no solution until you say what the problem is, rather than just ranting. "Software breakdown" down is as meaningful as "car won't go".
If you read the terms and conditions that you agreed to in order to post here, you would know that Apple is not "our company". Nobody here works for Apple, we are users that voluntarily try to help, so raving at us is valueless.

Finding the user-exits of a SAP transaction code

Hi All,
Can any one tell me how to find the user exits related to particular transaction code?
Regards,
Prem

Dear PremKumar,
*Please Search SDN Before posting any thread the question you have asked is already available since you are new to SDN and for your reference iam pasting the code copy paste the same code and execute and give the TCODE then it will list out all the exits.
*REPORT ZUSEREXIT.
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
Can you closse the thread if your problem got fixed !!!!
Cheers
fareed

I do not see the user interface for the Logic software instruments. I can hear them play through my midi keyboard but I cannot see them to adjust parameters. Please advise.

I do not see the user interface for the Logic Pro software instruments. I can hear them play through my midi keyboard but cannot see them to adjust the parameters. Please advise.

Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".

My computer is loud when the fan is running. Does anyone have any suggestions?

My computer is loud when the fan is running. Does anyone have any suggestions?

Hello,
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

When I use the new Pages on my iPad, I can't open it on my new computer. It tells me that I must download the new Pages to see the Pages document, but when I try to download the new pages to my computer it tells me all apps are up to date.

When I use the new Pages app. On my IPod to type documents, I can't open them on my new computer. It sends me a message that I have to download a newer version of pages to see the Pages document. When I try to do that it tells me all my apps are up to date and will not allow me to upgrade the pages on my iMac.
Any suggestions?

What level of OS X is installed on your Mac (your profile is incomplete)?
Barry

I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV . My photo apps is Version 1.0 (209.52.0)

Have you tried deleting the photo cache from your computer and then re-trying the photo sync and see if they all then copy over (you need to select and sync all the photos that you want on the iPad together in one go, as only the most recent photo sync remains on the iPad) ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
Don't know about the Facebook photo emailing, but there are a number of apps that allow to upload photos to their site (e.g. the 'official' Facebook app).
(For future info, typing all in capitals is considered SHOUTING - you are more likely to get help/responses if you don't.)

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshoo

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

Function Module to change the user status of a business transaction

Hi,
I want to change the user status of a business transaction. Plz let me know if there is a function module to change the user status.I found some FMs.
- CRM_STATUS_MAINTAIN_OW
- BBP_PROCDOC_STATUS_CHANGE_DIRE
- CRM_ORDER_CHANGE_STATUS
But these FM says that it has to be used for changing system status.
Thanx,
Sivagami.R

hi Siva,
here is some sample code :
data :
ip_guid            type crmt_object_guid,
ls_status            type crmt_status_com,
lt_status            type crmt_status_comt,
ls_input_field       type crmt_input_field,
ls_input_field_names type crmt_input_field_names,
lt_input_fields      type crmt_input_field_tab,
lt_obj_guids         type crmt_object_guid_tab,
ip_guid = <your guid>.
ls_status-ref_guid = IP_GUID.
ls_status-ref_kind = 'A'.
ls_status-status = lv_newstat.
ls_status-user_stat_proc = 'ZCRMCOM1'.
ls_status-activate   = 'X'.
INSERT ls_status INTO TABLE lt_status.
ls_input_field-ref_guid = IP_GUID.
ls_input_field-ref_kind = 'A'.
ls_input_field-objectname = 'STATUS'.
ls_input_field_names-fieldname = 'ACTIVATE'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'STATUS'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
insert IP_GUID into table lt_obj_guids.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
    it_status       = lt_status
CHANGING
    ct_input_fields = lt_input_fields.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    it_objects_to_save = lt_obj_guids
EXCEPTIONS
    OTHERS              = 2.
COMMIT WORK.
please award points if helps
cheers

See the user's hostname when doing transactions at any given time.

Similar Messages

Maybe you are looking for