See this post to see how to ID the cell tower to which you are connected

This free Android APP will locate the cell tower you are using.
https://community.verizonwireless.com/thread/766309
JerryF

Hi,
Thank you for your post here.
As far as I know, TMG has no option for us to do that. You may capture the packets and distinguish them based on IP.
Best Regards
Quan Gu

Similar Messages

Every time that I try to update my iPod (version 4.3.1 I believe) it just says that it can't connect to the server please check that you are connected or try again later. I've tried this twice on two different occasions already, what do I do?

^^^

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

With OSX Lion, how use Spotlight to know the way to a file you are searching ; formerly , with Snow leopard you had only to let the arrow pointer on the name of the file , but now on Lion it didn't work, how to do ?

How to know the way to a file you are searching in Spotlight with OSX Lion ?

You are right, the way to the file appear down the virtual picture, near the title of the documents ; it is a little more complicated than in Snw Leopard , but it works
Many thanks from France
Robert

How can i see which devices are connected to my wireless network?

how can i see which devices are connected to my wireless network?

Login to your router and view the DHCP clients.

HT1351 I cannot add video to itunes and my iphone i see this warning" Example' was not copied to the iPhone because it cannot be played on this iPhone.

I cannot add video to itunes and my iphone i see this warning" Example' was not copied to the iPhone because it cannot be played on this iPhone.

Hi akbar.joya,
If you are having issues transfering video to your iPhone, you may find the following article helpful:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Regards,
- Brenden

My widget browser keeps showing "failed getting widget feed" and keeps saying "failed getting widget feed and make sure you are connected to the internet" when I am connected to the internet. How do I fix this?

my widget browser keeps showing "failed getting widget feed" and keeps saying "failed getting widget feed and make sure you are connected to the internet" when I am connected to the internet. How do I fix this?

Widget Browser is gone. Adobe pulled the plug on it quite a while ago.
See this related discussion from earlier today.
Widgets a Gone Gone
Nancy O.

HT4972 This does not explain how to do the upgrade from IOS4 to 5. How do I do that?

This does not explain how to do the upgrade from IOS4 to 5. How do I do that?
I would be ideal to have a step by step approach I can follow.

To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 2G can only go to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models

When going to certain sites a window will pop up saying that " Information may be seen by a third party" This happens a lot even with sites that i know are secure. What is this pop up and how "insecure is the site i am putting information on.

The pop up says Security warning. You have an encrypted page that contains unencrypted information and may easily read by a third party.
What is this pop up and how secure is the site i am on when this pops up.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to reference the cell next to another cell in a formula?

I have a list of dates with transaction totals next to them in a large list. At the bottom I have a cell that shows which cell was the max. Now I am trying to pull the date that is located next to the max cell. How do I do this?

I'm not clear on whether your "cell that shows which cell was the max" contains the max value or contains the address of the cell with the max or contains the row number where the max can be found so I'll give you three answers.
If your list of numbers is in B2 through B10 and B11 is your max =MAX(B2:B10) and column C has the dates then the function would be
=LOOKUP(B11,B2:B10,C2:C10)
If your list of numbers is in B2 through B10 and B11 is the cell address of your max (B7 for example) and column C has the dates then the function would be
=LOOKUP(INDIRECT(B11),B2:B10,C2:C10)
If your list of numbers is in B2 through B10 and B11 is the row number of the max (7 for example) and column C has the dates then the function would be
=INDIRECT("C"&B11)
My first post was geared toward the first of these three answers because that made the most sense.
If you are new to Numbers, I recommend downloading the Numbers Users Guide which can be found in the Help menu. The Formulas and Functions guide can also be found there which will help you with the formulas. Information on functions can also be found on the toolbar if you click on Functions and choose Show Function Browser. That brings up a handy function reference window so you can quickly see how to use each formula.

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

How to get the details of Transports which are yet to be imported

Hi Experts,
Kindly let me know how to get the Transport request details which were not yet imported.
For example:
We have two client in development system 300 and 400, The transports which are created in 300 and imported to 400 (in SCC1).
I need to know the details of transport requests related to 300 which are yet be to moved to 400.
Where can i get these details.
Thanks,
Narasimhan Krishna

Narasimhan,
Take a closer look at Yves KERVADEC's approach. The issue here is that typically SCC1 is used to move transports which have not yet been closed. You can see the details of any transport via se01/se09/se10, whether open or closed, but my interpretation of your question is that the customer wants to know which transports have been imported into the unit test client (400) via SCC1, which transports have been brought in by the transport system (after they were closed), and which transports have not yet been sent to either the unit test or QA system (i.e. are still open).
My guess is that you are trying to track down why things work in the unit test client and not in the QA client. That is actually a different question with a different approach, but if that's what you really want to answer, go ahead and ask that question in a separate thread and you'll get a ton of techniques.
Back to the question you actually asked: By writing a query, you can get a list of transports which have been brought in to the unit test client via SCC1. You can also get this information from SCC1 --> Goto --> Log Display. Then click All Transport Requests and doubleclick on the client. This will give you the import log of your unit test client with date/time stamp. Analysis of that data indicates to me that perhaps you may want to look at CC0_RSCCPROT03_ALV, but I'm not an ABAPer so the previously mentioned tables are probably better.
Anyway, once you have a list of transports which have been imported, you can subtract out the ones that have been closed and transported downstream (and back into the unit test client.. your transport path does re-import the final version of the transports into the unit test client... right?). You can get that information from another query or you can get the list from STMS as suggested by Aparajit Banik.Then you'll have a list of transports which have been imported into the unit test client via SCC1 but have not yet been released and made it downstream. This will give you a "hit list" of transports which might be causing a mismatch between your unit test and QAS clients. You would then inspect them more closely with SE09/SE10/SE01 (I prefer se01, but different folks prefer different version of the transaction).
Again, there are better ways to deal with client mismatches, but I'm answering the question you asked in case I misunderstood the underlying subtext.
I hope this helps!
Best regards,
--Tom

How to find out which jobs are connected to the user

Hello, i have a question, but i was unable to find the answer. The problem is that our internal consultant left the company, and there are certain jobs that run under his account. We want now to switch this jobs to other accounts. The problem we are facing is how to find out what jobs, or job steps are connected with his account, so we can safely demote his account, so that no other jobs will be run under his account. Thank you very much
Sincerely,
Luka Prijic

the only reliable way to do this is by scanning table TBTCP using the person's userID in field AUTHCKNAM and filtering by job statuses: scheduled, released, ready and active (sorry I can't remember the code#'s off top of my head, something like P=scheduled, S=scheduled...you have to look it up). When you search SM37 it only permits you to scan by the userID who created the job, but it won't tell you if a different userID is defined in a job step. That's why you need to scan TBTCP. Don't forget that you should also check for a user's open Workflow items before deletion.
I noticed some posts in this forum that suggest a userID should never be deleted, only locked, added to a special user group, and all role assignments removed. However I've never worked somewhere that does this.

How to set the Email(i) address that you get with your iPhone 3G in Japan?

This isn't covered in the U.S. manual probably because the feature is slightly different in Japan.
Basically the issue is this - cell phones in Japan have their own "cell phone email address". I believe that's not the case in the U.S.
So when I got my iPhone 3G in Japan today from Softbank, the cell phone provider, I also got a new email address [email protected] The "i" stands for iPhone.
The question is what to do with it? Unlike other cell phone providers, this is not set up on the cell phone itself when you get it.
Thanks,
doug

I figured it out.
With the iPhone you can set up multiple regular Internet email accounts directly in the Mail app, using either IMAP or POP3 and even have your existing accounts synched from your computer.
It turns out that the [email protected] email account you get with your iPhone is just another "Other" account that you set up in the mail settings. When you add your Softbank address and password it automatically sets up the server to be IMAP for checking mail and the correct SMTP server and it just appears as one more push account in your accounts list.
I'm not sure it is really useful for anything or not, but since a lot of people want to know "what is your cell phone address" I guess it is best to set it and have one rather than explain why you don't really need a separate cell phone address for your iPhone.
It's sort of interesting. And it is actually an improvement over traditional Japanese cell phone email I think. And you can see nice HTML mail to boot.
Anyway, I hope this helps anybody else who doesn't know what to do with their extra Softbank address that comes with their iPhone 3G.
doug

See this post to see how to ID the cell tower to which you are connected

Similar Messages

Maybe you are looking for