See TIme Capsule on PC - Airport Disk Help

My time capsule network can been seen by all the Mac's in my office. I was able to see it on my PC but now when my PC starts i get an pop up that AirPort Disk "TIme Capsule" Its saying the airport disk became available what do you want to do?
Ignore
Connect with password
I pick connect w/ password
type the password but get nothing
and yes the password is correct?!?!?!
any help will do!!!
b

I have exactly the same problem; i've checked and rechecked the password and will just not go through.
My TC was configured with my macbookpro, my PC's connected to the TC through ethernet cable (same happens on wifi), can access Internet but the time capsule asks for a password but would not accept the one i've created.
any help ?
thanks

Similar Messages

Time Capsule with existing Airport Extreme--Help

I just bought a new 20 inch iMac with a Time Capsule for home. I have an existing Airport Extreme and there are a number of peripherals (2 iBooks, Playstation 3) which feed off of this airport. What I want to do is make the Time Capsule accessible only to my new iMac and keep the other network intact. I disconnected my DSL from my Extreme and connected it to the Time Capsule. It works fine. My thought was then to run an ethernet line from the back of the TC to the Extreme. I did this, got a green reception signal on the ethernet from the TC, but am unable to make the Extreme work as it did before. I know I'm doing something wrong--possibly the config on the Extreme--but I'm clueless as to making this work. Any help would be appreciated.
Thanks

Do exactly what you describe but place the secondary router in bridge mode then configure its wireless.

Cannot see time capsule on Airport Utility (Vista Home)

Hi I have a new Time Capsule. Have set up Airport Utility on Windows Vista Home Premium. But I cannot find the time capsule on the airport utility. I tried restarting, rescanning. Help!!!!!!!

Ok.. You don't need to use the airport utility then.. it is irrelevant if the windows computer can see it or not in the utility.
What is AC?
The new TC is AC wireless.
Open Windows Explorer.. type
\\TCIPaddress into the address bar. where you replace that that with the actual IP address.
eg \\10.0.1.1
It should show up.. If it fails, then turn off the vista firewall.. and open a command prompt and ping the TC by name and IP address.
Note names like Fred Blog's Airport Time Capsule.. are useless for windows.
You need SMB compatible names.. eg TCgen5
Wireless also should be TCwifi for example.
Short, no spaces and pure alphanumeric.
Once you do that does the TC disk show in the Vista computer??
It must respond to pings.. make sure windows hasn't changed the computer from home to work or public network.. windows can do that spontaneously because it was full moon.

Help - G4 cannot see Time Capsule on Powerup

Hi,
I have one computer - an old G4, an iPhone and a PS3 connected to my Time Capsule (bought in May).
-G4 is connected by Ethernet
-PS3 and iPhone wirelessly
I usually put my G4 to sleep, and wake it, and everything's fine.
Twice now, the power has gone out, and when it comes back, the Time Capsule is green, and the PS3 and iPhone can see it. I boot the G4, and it cannot see it. The G4 also shows a date in 1969 (does that indicate other issues?).
I have tried the following both times -
Resetting the Time Capsule with the pin - does not work
Unplugging and resetting the time capsule with pin - does not work
Rebooting the computer and clearing out the PRAM - does not work
Changing the date to after 2001 on the clock, - no help
Of course, now that I've reset the time capsule, I can't configure it again and have lost the wireless connection.
Last time I eventually got it to work - but it seemed random as to how. I'm frustrated, and I would like any advice possible. I hope it's the computer and not the Time Capsule. Any thoughts? Thank you in advance.

Now I'm getting really annoyed.
Went to see the mac genius today at the Apple store. Saw it wirelessly no problem.
Saw it via Ethernet no problem. When I got him to check that there was a file on the hard drive he did it wirelessly though.
Told me Time Capsule was fine (and I believe him). Told me to take it home, create a second ethernet connection, and trash preferences for "System Configuration" if necessary. Did all that, booted, found the Time Capsule no problem.
Thought my problem was solved, but was it?
Turned off the computer, turned it on a few hours later - will not see Time Capsule, Airport will not recognize it AGAIN. Tried trashing preferences and rebooting - it doesn't work.
I'm able to connect the ethernet cable directly to the DSL modem and use PPPOE, it's fine.
I don't get it. What else can I do?

Parallels Win7 - Airport Utility cannot see Time Capsule

Running Win7 as virtual machine on Mac using Parallels 5.0. Mac can see fully functioning time capsule but when I switch to Win7 virtual machine, airport utility will briefly see time capsule and then it disappears completely. Same happens with using bonjour printer wizard when the HP Laserjet connected via USB to the time capusle will first appear and then disappear after 5-8 seconds. Searched help forums and have not found a solution, and welcome any help please. Internet access via time capsule on Win7 virtual machine not a problem at all.

Same issue, I found this http://forum.parallels.com/showthread.php?t=21064
Time Capsule is not a complete product.

HT3275 How do I correct this problem: "Time Machine couldn't complete the backup to "Robert's Airport Time Capsule." The backup disk image "/Volumes/Data/Robert's iMac.sparsebundle" is already in use.

How do I correct the following problem?
"Time Machine couldn't complete the backup to "Robert's Airport Time Capsule".
The backup disk image "/Volumes/Data/Robert's iMac.sparsebundle" is already in use.

xor. wrote:
I switched off the TM for 10 seconds and my laptop still complains about the backup image ... is in use.
Some ideas?
There is some more details here.
C12 http://pondini.org/TM/Troubleshooting.html
Tell us more if you cannot get it working.

HT3728 Firmware Update 7.6.4 Error: I uploaded the 7.6.4 firmware update today, and received an error message as it was finalising. As I am using my Time Capsule as the Airport router, I am now no longer able to access it to try to resolve the problem. He

Dear Support Team,
I agreed to the Time Capsule 7.6.4 update today, but as it was completing, I received an error. It said to close the page and try again.
I use my Time Capsule as my Airport wireless router and now can't access the Time Capsule to re-upload the Firmware update.
Has anyone else had this happen?
Is there a way to resolve the problem?
Do I need to hardwire the Time Capsule? Then what?
Would really appreciate some help!!
Thanks everyone.

Factory reset the TC and it should come back to life.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
As a rule .. wireless is not reliable enough for mission critical work like firmware upgrades.. (Heck I don't think it is reliable enough for backups).
Apple doesn't insist on wired connections.. some other manufacturers do.. and post warnings not to attempt it over wireless. Warnings inevitably read after the failed firmware update btw.. so perhaps Apple have decided to just save themselves the hassle.
I believe it is just good practice to use ethernet for any time that sitting on a branch.. whilst sawing it off (ie failure will kill any future access).. means you always use ethernet for any setting up of a wireless router.. but you see I am old.. with grey/white hair.. and too many dead modems and routers around me.

Cannot see Time Capsule for backup but internet perfect A

I've seen other posts about time capsule problems and most talk about wireless dropout and loss of internet connectivity. My situation is almost the reverse:
Full airport strength in menu bar. Full access to internet sites on at least one computer. Cannot see Time Capsule via Airport Utility or in Finder on any computer. Time Machine backups fail (marked as Delayed in menu bar item).
If I reboot (via unplugging) the Time Capsule, it shows up again in Airport Utility and backups are successful. This has happened three times now. I think the first time was prior to upgrading the firmware. The second two times were after the Time Capsule firmware upgrade. In the second two instances, it looks like the backups run for about 12-13 hours, every hour. No problems. Then, they drop out. Yesterday, it ran from 8:30 AM until 9 PM.
I've got two Macs (a Powerbook G4 and a MacBook Pro), each running latest software updates (security, 10.5.2, etc.).
Unplugging (rebooting) my Time Capsule each day is not an option. That's partly why I moved from an ancient LinkSys router that always needed to be rebooted since we lost local and internet access. Any help is much appreciated!
Cheers,
Drew

Have you set up the TC with user accounts??
Most people just use the TC password..
I have done very little with user accounts on the TC.. it seems fundamentally wrong headed to me.. If you have a domain controller with everyone using accounts to login that is fine.. and the TC would then exist in connection to the domain controller.. but it is a home device and there is no function to all that.
What will happen if you change over to standard security or even turn on the guest account I am too scared to suggest as you may not easily get connection back again.. The TC certainly displays a warning going to accounts.. I am not sure of warnings going away from accounts.
If you didn't setup the TC, do you have admin access to it??
Perhaps I am assuming too much before you tell me everything. But I may suggest things you don't want to try.. unfortunately I cannot say this will work.. the issue is widespread across the Mountain Lion TC combo and I have yet to see Apple suggest a solution or even fess up there is a problem. Daily reboots are just simply now a part of the scene for all windows and Mac users.
Is the TC the main router for the network.. 1 hour is not default lease in the TC and very few people even know how to change it.. standard is 1day. I would consider 1hr adequately short for all arp tables to be kept up to date.. the computer should be seeking new lease at 30min.. ie half lease time.
If the TC is bridged an not controlling the network.. that can contribute to the issue.
Setting a static IP on the TC if it is bridged my help.

About time capsule and external hard disk

I have got rMBP. I also have got time capsule. External WD hard disk is connected to time capsule.
I have got 3 users in my rMBP:
(1) Admin : Administrator
(2) User A : I normally do all my work from this user.
(3) User B: I recently added this new user.
Here, using Finder tabs, User A can see time capsule and External WD hard disk. But, Admin and User B cannot. I also want User B to have the ability to see WD hard disk (and time capsule). For User B and Admin, time capsule does show up, but it shows as not connected. How can I provide User B the ability to see External WD hard disk (since User B needs to store large different files there)? Any permission issue on hard disk?
(Amazingly backup does take place automatically even if I am connected as User B or Admin).
I will appreciate your feedback. Thanks.

Emma1609 wrote:
Hi,
hi emma, and welcome to discussions
Once the external HD is turned on my Time Capsule is not longer recognized. I can't connect to Time Capsule and make any backups. It is also no longer appearing in the Airport settings.
you could try a power cycle on your devices. turn off modem, TC, and HD for, say, 10 minutes. turn the modem back on for 2 minutes, followed by the HD, followed by the TC.
then go airport utility > manual setup > disks. see if your HD is showing beneath the TC

Can Time Capsule backup an Airport Extreme's attached USB hard drive?

Can Time Capsule backup an Airport Extreme's attached USB hard drive (without currently being attached to a MAC OSX LION system)?

No, sorry.. there is no way for the TC to see the files.. and even if you plug the hard disk into the TC there is no mechanism in the TC to drag the files to itself.. The TC is absolutely a dumb network attached drive.. everything you want to do must be done from a computer.

Time Capsule disappears from Airport Utility, need to restart to find it.

I got a new Time Capsule for Christmas. Our household was using a D-Link router. The network was working fine for a Macbook, iMac, 2 x iPhones, PC Laptop and desktop. The two laptops are upstairs and connect wirelessly to the Time Capsule and an airport Express connected to stereo is set to extend the network.
Since Christmas the laptops are losing contact with the Time Capsule. At first I'd physically disconnect the modem and TC and the TC would reappear. Finding this annoying I rang Apple. I was told to edit locations in networks, add a location and basically reselect my network. I was told to monitor this, but that it should help. The TC went off airport utility again (the green light was still on), so i went through the process of edit location again and it worked. I posted the problem in macbook internet, thinking it was a macbook issue as my iPhone could still connect to the network and have internet. People suggested i do a power cycle. The next time the network crashed I performed a power cycle on every item connected to the network and turned on in correct order.
Tonight my macbook and pc laptop lost connection with the internet again. I had to physically take the TC and modem of power to get the network back again.
This is happening every couple of days, and I'm now sure it's a Time Capsule issue, this issue didn't happen with my D-Link router. I have my Macbook completing Time Machine Backups wirelessly, and when we lose connection with the TC, backups are delayed. Could the Time Machine backups be causing this loss of connection?
I'm going to call Apple and see if they have another solution, but was checking to see if others have had this problem and maybe a solution?

I just purchased a new Airport Time Capsule 3TB (ME 182 AM/A)
I broke my own rules.. as I saw one going really cheap and our currency is dropping like crazy so i thought I better get one .. stupid idea.. it lasted less than week and then refused to even power on.. It has gone back for replacement.
For your situation I think the problem is not the TC as much as it is yosemite.. but it is the combo.
Try the things I have suggested in this thread.. they have worked or helped other people.
Time Capsule keeps losing connectivity

Mac can not see time capsule

i bought Time capsule over Amazon .Air port works fine , but my mac can not see time capsule,,,sometime does , but most of the time not...
It is a problem with time capsule i have 2 T new generation

You don't mention what type of Mac you have, but is there any way you can move it around to see if that affects the problem? If you hold down an "option" key while you pull down the AirPort/WiFi menu bar item, you should see a value labeled "RSSI" that is the strength of the wireless signal. A value closer to zero is stronger. For example, -30 is decent but -80 is poor.
By the way, you don't seem to have declared any of your system details in your profile or didn't select your details to be included in your post. Those can help people give you correct advice. To update that, click on "Your Stuff" near the top of a window on these discussion groups, then on "Profile". Scroll down to "My Products" and either edit an existing one or add a new one.

HT1338 I erased my Time Capsule HD using the Disk Utility on my Vista computer

I erased my Time Capsule HD using the Disk Utility on my Vista computer and I now can not see my TC in my computer. I tried to remap it by right clicking my computer and selecting remap drive, but after selecting Z drive I cannot find TC in browser. Not sure if I did something wrong but it was working fine before I erased it. Any help would be greatly appreciated.

To erase the OSX on your harddisk you have to boot your Mac from the OSx Install DVD that came with your Mac.
You can't erase the OSx from which your Mac is booted.
http://support.apple.com/kb/HT3910
Stefan

New Retina MBP Doesn't See Time Capsule

Just purchased a new retina MBP and have 2 probems with it.
1. It doesn't see my Time Capsule, when using Airport Utility it states that 'no configured airport base stations have been found'. I also have an iMac which sees the TC ok.
2. I did a superduper backup of my old MBP but set up the new MBP as a new machine just importing the applications from the backup using Migration assistant. Because of the problem in item 1 above I tried to start up using the external backup but failed. The new MBP cannot startup on the backup disk (Freeagent GoFlex 1TB) even though it's shown as an optional startup in the settings. When trying to startup from it the machine just goes to a black screen and does nothing.
So far, not too impressed.
Regards

1. Yesterday my mbp-r was unable to find my AP extreme base station in Airport Utility, even though the network seemed to be functioning perfectly. Rebooted the mbp-r (not painful given the speed), and now all is well with Airport Utility. Mysterious, but it worked.
2. Does superduper clone the recovery partition? (I think I read somewhere it doesn't.) And if not, can you boot from such a clone? IIRC, Carbon Copy Cloner can produce a recovery partition.

Time Capsule green and Airport Express blinking amber

I replaced my AEBX with a Time Capsule and now the AEX configured as an extender blinks amber continuously. Bringing up AirPort Utility and following the AU help instructions to find out why the blinking amber, shows that the AEX is operating normally. In fact, the little faux LED to the left of the AEX icon shows green while the real LED is blinking amber.
The AEX was solid green before installing the TC.
Anyone else seen this? Anyone know what's going on?

I cannot get Airport Utility to see both my Time Capsule and my Airport Express at the same time. When I disconnected from the Time Capsule network it saw the AEx but repeatedly said there was a problem configuring the device. So I am stuck.

See TIme Capsule on PC - Airport Disk Help

Similar Messages

Maybe you are looking for