See which clips are already used in the sequence

hi there,
I am a complete newby for mac and fce
I started a project for my dive video in the Filippines.
I have like a 1000 clips in the browser.
Is there a way in fce to see which clips are already use in the sequence and which are not?
In pinacle studio they were marked with a red v

This is a way to solve your problem.
http://discussions.apple.com/thread.jspa?threadID=2283002&tstart=0

Similar Messages

How can I tell which clips are currently used in a sequence

In the Project window there is a list of clips I have loaded, but often I lose track of which clips are currently used in the sequence. In Premiere Elements there was a green check next to clips you have used in the timeline, but I don't see any indication of which clips are currently used in the sequence/timeline I am editing.
Is there some way to sort the loaded clips so that the ones in use all appear first followed by those clips not currently being used in the timeline/sequence. Is there some indication I am missing showing me whether or not a clip I have loaded is currently being used or not?
-Roger Uzun

This isn't really a sorting mechanism, but you can see how many times a clip is used, where it's used, and then navigate to it using the following non-descript button:
You need to have a clip selected in the Project Panel to see this information, of course. Once you click the disclosure triangle, you'll see the list of sequences and the times where the clip is used; if you select one of those references, the sequence will come to the front in the Timeline panel, and the CTI will park at its in point.
Again, not a sorting means, but it might be helpful in some instances.

Can you see which timeline clips are being used in Media Browser?

I'm a relatively new user and may not be familiar enough with cs5.5 but
is there a way to see what clips are being used on the editing timeline in the media browser.
I open premiere pro - Project is loaded. I edit the scene until it is finished.
When I look over at the media browser, all my raw clips (some of which I'm
using on the editing timeline) look the same - I can't tell which ones I using on the timeline.
The reason I ask - when I fiinish editing a scene it would be nice to glance over at the
media brower folder where my raw clips are located - easily see which ones I'm using because they
are highlighted or checked and then delete the ones I no longer need.
Is there a way to do this now?
Thanks
Jeff

I dont think so but a better way is to look in the top of the Project Window and there is a drop down that will show you all the useage instances of the clip. You can click on them to go to them in the timeline.

Identifying which clips are used in browser

I am learning FCP for the first time but I am extremely familiar with editing video on a PC. My version of FCP is 6.0.6. I really want a way to see in the browser which clips I have used in a sequence. I know I could manually mark each take by using a label but that is a huge time waste with hundreds of clips in my program. Show duplicate frames is helpful in figuring out if I have used a shot before but I want to avoid having to ever even put the same shot into the time line.
If I have 100 shots and I have used 75, I want a fast way to see the other 25 shots in my browser so I don't waist time trying every shot to see if there are duplicated frames in my time line. And I don't want to have to manually change a label every time I edit in a shot for the first time.
Premier does this so much better.
Thank you.

Thank you but I know how to enable "Show Duplicate Frames." I want to avoid needing to use this in the first place.
In Premier's equivalent to the browser window we have a field labeled "used" and it's checked if we have used the clip in the time line / sequence. Then I can instantly see which clips I have pulled nothing from.
Yes I could edit my piece and use the "Show Duplicate Frames" to find out I used 30 clips twice or more in a montage. I want to avoid putting the clips into the sequence it first place so I don't waste time. I also don't want to waste time editing a clip to the time line just to find out if I have used it before with the Show Duplicate Frames setting enabled. That wasts lots of time when you have a large number of clips. I don't want to try say 50 clips in the time line to find the 1 or 2 that I haven't already used.
I want to be able to see what clips are used in any sequence from within the browser so I can quickly see what's left. This is not Show Duplicate Frames. Again I understand what that setting does and it is helpful but not what I am talking about.
Thank you,
David

How to find which devices are still using affected domain controller

Hi Everyone,
We have a 5 Domain controller's in a Site. And we are going to decommisson one of our affected DC in a site.
Can you please let me know how to find the log files to see which devices are still using this domain controller.
Regards,
Neel kamal
Neel kamal

Neel,
From strictly an Active Directory perspective, there is nothing special you need to do to decommission a domain controller in a site. There are many processes that automatically balance out and recreate connections as needed without any user intervention.
The DC Locator process will automatically direct clients to active domain controllers, there is nothing you need to do here.
What you need to be concerned with are things like the following:
DNS - Are you running AD integrated DNS and is the DC you are decommissioning hosting that roll - if so, is it the ONLY DC in the
site that is running DNS? You'll need at least one in the site.
DHCP server - Is the DC you are demoting a DHCP server? You'll need to account for that.
Global Catalog - Is the DC you are demoting a Global Catalog server? You'll need at least one in the site.
File Shares - Is the DC hosting any files shares? You'll need to move those and make sure you redirect your clients.
Was this DC a set as a Preferred Bridgehead Server? You'll need to undo that first.
Those are the big ones that come to mind. Decommissioning a DC is easy if you have prepared properly. The others that have replied have offered some great advice which you should follow. Do your homework and you should be fine.
Hope that helps
Gary
Gary G. Gray
MCP, MCTS, MCITP, MCT Alumni
Please remember to mark the replies as answers if they are helpful.
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Is there a way to visually see what clips are used in the timeline?

In FCP, is there a way to see in the browser all the clips that are being used in the timeline?
What I am looking for is a column that has a check mark in it if the clip is being used in the timeline.
In a big project, it would be good to visually see what clips have yet to be used.
Just wondering.
Ian

This probably isn't exactly what you're looking for, but you can turn on show duplicate frames in your timeline.
There is an option in the sequence>timeline settings that when turned on will put a red line under any footage that is duplicated in your sequence.
However there must be a reel number assigned to the clip and the timecode must be unique in order for it to work properly.
Another work around might be to color code each clip as you use it in your browser.

Is there a way to find out which CSS rules are being used by the different html files?

Is there a way in Dreamweaver CS3 to find out which CSS rules are being used by the different html files, sitewide?
Thanks - Dave

Firefox add-on "Web Developer Toolbar" is a must have. Information > Display Div & Class details.
https://addons.mozilla.org/en-US/firefox/addon/60
Another handy Firefox Add-on to add to your tool chest is called "Dust-Me Selectors."
http://www.sitepoint.com/dustmeselectors/
"It extracts all the selectors from all the stylesheets on the page you're viewing, then analyzes that page to see which of those selectors are not used. The data is then stored so that when testing subsequent pages, selectors can be crossed off the list as they're encountered.
You can test pages individually, or spider an entire site, and you'll end up with a profile of which selectors are not used anywhere."
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How can i see which items are taking up the most disk space

I have a Titanium PowerBook G4 with a 20GB hard drive. I'm currently using 15GB. I have tried searching through my hard drive to see which programs are taking up the most space. When I add up the totals of the various folders, etc., it's not 15GB worth. I feel like some items must be nested somehow, making them difficult to find. Is there some way to search your computer by size of items? I know that opening the hard drive and clicking on the size tab will sort things according to size. However, the folders don't show their size unless you click on them individually. Any suggestions?
Thanks.

While viewing a Finder window go to View>Show View Options, put a check in the box for 'Calculate All Sizes'. This is a setting you don't normally want to have turned on as it slows down the refresh when you switch windows, so you might want to remove the check once you identify the disk hogs.
BTW- You can free up a lot of disk space & RAM if you remove any fonts that you & the OS don't really need. You may also have a great deal of space taken up by unnecessary printer drivers, not to mention the plethora of ReadMes & other 'goodies' that get added when you install software.
HTH |:>)

HT1339 Hi i have an I pod and i had used it as hard disk also. Now when ever i connect it with my Laptop it shows restore to factory setting....i wanted to knwo is there any way i can save the data which i had already stored in the I pod

Hi i have an I pod and i had used it as hard disk also. Now when ever i connect it with my Laptop it shows restore to factory setting....i wanted to knwo is there any way i can save the data which i had already stored in the I pod. I dont want to loose that data???

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

HT4972 My safari app won't open itunes apps page & the apple apps which are already downlaoded on the iPhone 4iOS when I purchased it have disappeared and can't download them again because safari msgs pop up reading "the site addy is incorrect!" please he

My safari app won't open itunes apps page & the apple apps which are already downlaoded on the iPhone 4iOS when I purchased it have disappeared and can't download them again because safari msgs pop up reading "the site addy is incorrect!" please help

Tried the iTunes App on my iPhone....Still nothing!
Infact I have no "Apps App" to tap & open so i cannot view/purchase any Apps for my iPhone
My wife's even tried downloading Apps to my iPhone from our iPad after syncing them up but all it seems to do is send me the App badge from our iPad to my iPhone but cannot open it because the App is still 'Waiting'...Waiting for what???...nothing!??...No download???...just a faded App which won't open? Apps that just sit & wait!??? It's not good when your trying to run a business for the 1st time & not good when its causing rows either! So what do I do? because its been like this for a year nearly now...:S

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

*Ralph Johns* writes:
"Your options are:
Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
Do you mean a trial account from .Mac? (DotMac)
"Get an AIM Screen name and set it to Display what you want as you set it up.
The Screen name can be whatever yu want but you can also set it to display something else as well."
I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
Thanks very much for taking the time to reply, though.

Fcx4 bin clips are not appearing in the viewer after clicking on them.

fcx4 bin clips are not appearing in the viewer after clicking on them , i need help getting them to appear in the viewer.

I have the same issue. I am using apex.oracle.com for some test applications, but for last couple of weeks when I login and click the "Application builder" I could not see my applications there (around 4-5 of them)! It says No applications found.
Neither I have any application groups setup nor do any criteria given in "Application" search field under "Application builder".
The only way I could access some, if not all, of my applications is to pull it from the link under the context box "Recent" (which you can see in the right hand side of the "Application builder" page.)
Any help is greatly appreciated. This issue is not a show stopper as I could still pull out my critical applications from the recent link, but its definitely a worrisome issue.
Thanks in advance
Regards
Ligon Gopinathan

Which patches are already applied

Hi,
how can I requeste from the database which patches are already applied ?
select * from TABLENAME ;
I have forgotten the name of table or view.
Many thanks before.

If you want to see installed product versions, then you can use V$VERSION and DBA_REGISTRY dictionary views (the last one 9i onwards).

I see that there are people that have the problem suddenly almeer notes disappear this is with me also happened and now comes the: If I put a backup that I have my back than notes for 30 seconds back and THEN THEY DISAPPEAR again!

i see that there are people that have the problem suddenly all notes disappear :
this is with me also happend and now comes it
when iputa backup that i have back than i kan see the notes voor 30 seconds and than the disappear again!

Hello,
Just to set your expectations...it's fine to "rant" about things here, but I do hope you are not expecting a formal reply from anyone at BlackBerry. For this site is not a channel for any formal communications with, escalations to, nor support from BlackBerry for any purpose whatsoever. Rather, it is a user-to-user community of volunteers who try to help each other out to the best of their abilities. Note this banner, please, posted at the top of nearly every page of the site:
Consequently, words posted such as "WHAT THE HECK IS WRONG WITH YOU?" are actually directed at the other kind volunteers of this site, who may not respond in the most kindly of fashions. Hopefully, we all can understand that your rant is directed at BlackBerry (though, by placing it here, it is misplaced), but I just wanted to gently caution you about such posts, as well as ensure that your expectation concerning replies is properly set. Also, for new members who join the site, it's always good to have responses to such posts, covering the intended use of the site so that those new members can better understand such things.
On the other hand, if you do desire assistance from other users for your issues, you might consider wording your requests in a manner that would motivate a kind volunteer to provide such.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What are tools used by the xi/pi system ,to bug the errrors

hi gurus,
what are tools used by the xi/pi system ,to bug the errrors.
regards,
subba reddy

For all kind of errors the only tool available which bugs or say alerts for the error is Alert Management.
Alerts are messages which can be raised in case of failure.
Alerts - used for system errors, u can send a mail or msg whenever there is any failure. alert configuration can be done in t-code - ALERTCATDEF.
Alert Categrory can be defined in transaction ALRTCATDEF on abap stack. we can assign receipients to every alert category which specifies who will receive alert in case of error.
Alert rules can be defined in RWB.
for configuring alerts u need follwing roles first for defining or creating alertcategory
the roles reuired to access the RWB are:
1. SAP_XI_RWB_SERV_USER
2. SAP_XI_RWB_SERV_USER_MAIN
The roles for the Alert Management are:
1. SAP_ALM_ADMINISTRATOR
2. SAP_ALM_CUSTOMIZER
3. SAP_BC_ALM_ALERT_USER
Once this is done
alert category is defined and then tested
For Alert please see
The specified item was not found.
http://help.sap.com/saphelp_nw04/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
For details follow this link,
http://help.sap.com/saphelp_nw70/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm

See which clips are already used in the sequence

Similar Messages

Maybe you are looking for