Seebuger AS2 adapter for XI as sender for multiple messages

Hi all,
Has anyone managed to configure the Seeburger AS2 adapter for XI successfully to process multiple inbound message types.
We have an issue here with inbound messages being received by the AS2 adapter. We currently have it configured for inbound deliveries which is working fine. The issue is that we would now like to send other messages as well. It seems the AS2 adapter only looks at the sender/receiver party combination to determine the correct sender agreement, but does not look at the message type which is a limitation. I have heard mention of a splitter module which can be used to distinguish between different messages and pass them to the correct sender agreement for processing, information on this is thin on the ground to non existent. What is the name of the module? Is it specified in your sender AS2 adapter with parameters? Is it wrapped as an adapter? How do you configure the module to split and pass specific messages etc... Any help on this would be much appreciated.
Thx,
Pete

Hi Rudy,
the Classifier/BIC/Splitter - Solution is mainly designed for EDI-Messages that cannot be handled directly by XI.
IF you use pure XML-messages you should be able to handle it with XI-basic-functionality since this is what XI can handle itself.
Depending on how different your XML-Messages are, the effort will be very small or a little bit bigger.
In the ReceiverDetermination it should be possible for you to check whether certain XML-TAGs are existing or what the content for certain TAGs is BAsed on this information you can route the messages in a correct way.
(Of course you might have to create  your own XSD for this containing the important TAGs of each message, so you can setup your Conditions)
Btw. the Seeburger BIC-Adapter can provide also this functionality, but this also needs to be customized)
Greetings
Stefan

Similar Messages

  • I want to make new password for apple ID, but it link for reset is sending for old mail that I don't have access ages already. I have entered new alternative mail, but they still send reset link to old one.  What to do?

    I want to make new password for apple ID, but it sends  link for reset to my old mail that I don't have access ages already. I have entered new alternative mail, but they still send reset link to old one.  What to do?

    Apple ID security issues -
    Call Apple Care for your country and ask for the Account Security Team. They can assist you with your issue.
    http://support.apple.com/kb/HT5699

  • Sender Proxy - Multiple Message problem

    Hello,
    I have a problem in a proxy process. I have a Sender Proxy which reads a file and sends it to PI. The file is converted into IDocs and sent to SAP ERP. The problem is that my mapping is splitting the file and sending multiple IDocs. So in my mapping I have Split template.
    To the messages default the Messages and Message tags are added. The problem is when I sent my message from Proxy I am not able to add these Messages and Message tags.
    Is there a way to add it? Or is it not possible?
    Thanks.

    >>I am not able to add these Messages and Message tags
    Not very clear about the question.
    As I understand you get extra message tags when you change the occurance of messages in signature tab of message mapping.
    Have a look at the below blog for sending mutliple Idocs.
    I guess, it would eliminate the need of message tags.
    You donu2019t ave to change the occurance in Message Mapping . Just change the IDoc XSD as given in this blog
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change

  • Why is mail sending out multiple messages

    I have noticed that my sent mail has been sent numerous times

    10.9 has many problems with Mail.app, I only have one POP account setup in it, but never sends duplicates.
    Not much of an idea, but does this addy you're sending from have some aliases?
    Is there any Group name involved?
    If you just send to yourself does it send 5? If so Show Long Headers & look for the To: feild... might also do that on your Sent mails come to think of it... To: CC: & BCC:

  • AS2 adapter for PI 7.1

    Hi ALL,
    we are planing to use as2 adapter for PI 7.1 from a company called advantco .
    i have downloaded and got the adapter in the ESR and IB , not i need documentation for configuring the sender and receiver communication channel.
    if there is any documentation for cofiguring channels using as2 adapter both in the sender and reciver side pls send ..?
    thanks
    Shakeif

    Hi,
          Check the link which provides some info on see burger As2 adapter related stuff...
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/106d4b47-60a4-2c10-6685-bcb521769f4c?quicklink=index&overridelayout=true
    I hope this will be helpful for your AS2 also..
    HTH
    Rajesh

  • Seeburger AS2 Adapter sending message error

    I have configured a FAck scenario as described by the Seeburger Manual and am testing a AS2 messaging scenario with a vendor (basically the inbound EDI message is passed to the Seeburger splitter to create a new message for the inbound order, and then the existing payload is mapped to a Funcational Acknowledgement and sent back to the vendor).  I receive the message fine and the message split to create the order works fine, however when the FAck is passed to the AS2 receiver adapter (for transmission to the 3rd party) I get the following error:
    LOCATION [null, null, 91fcf4f0-5223-11dd-9c8d-5cd90a641602] >> ERROR TYPE [, COMPONENT_ERROR, not retryable, not fatal]] >> DESCRIPTION [AS2 Adapter failure >> MID
    MID <[email protected]22.2> already exists. - Duplicate will not be sent [LOC: com.seeburger.as2.component.AS2Client.storeMID]
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]22.2> already exists. - Duplicate will not be sent, SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]22.2> already exists. - Duplicate will not be sent
    I'm not sure where the "duplicate" message comes from as this message definitely has not been sent before.
    If I extract the same inbound message from the payload and pass it in using a file adapter (rather than the AS2 sender adapter) then the functional acknowledgement is created and transmitted to the vendor without any issues ... 
    Has anyone who has had some experience with the Seeburger AS2 adapter got any possible suggestions for resolving this issue?
    Regards,
    Jason

    Hello ,
    same issue occurred in my system
    Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]> already exists. - Duplicate will not be sent, SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]> already exists. - Duplicate will not be sent
    I'm not sure where the "duplicate" message comes from as this message definitely has not been sent before.
    Has anyone who has had some experience with the Seeburger AS2 adapter got any possible suggestions for resolving this issue?
    Please advise asap.

  • Send for publish: no contribute users or user roles in send list box

    Users needing to submit drafts for publishing choose Send for Publish.  When the Send window displays nothing appears in the Send the draft to another Contribute user: list box.  User needs to be able to choose 'all users in the "administrator" role.'

    Users needing to submit drafts for publishing choose Send for Publish.  When the Send window displays nothing appears in the Send the draft to another Contribute user: list box.  User needs to be able to choose 'all users in the "administrator" role.'

  • Seeburger AS2 Adapter:  Receiving multiple messages

    Hi guys,
    I'm having some trouble using AS2 Adapter for receiving multiple messages. The problem is really similar to Peter's problem.
    Seebuger AS2 adapter for XI as sender for multiple messages
    I have it configured for one scenario and it's working fine. The problem is when I'm trying to receive other messages for the same Party but different services. Meaning, I've one Party(example BMW) and several services (BMW_DE, BMW_USA, etc). I'm able to receive messages from service BMW_DE but when configuring BMW_USA I'm getting HTTP 403 Forbidden.
    This error may have different reasons:
    a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
    b) A valid sender agreement is missing.
    c) There are more then one AS2 sender agreements with the same sender AND receiver party.
    d) The corresponding inbound channel is set to inactive.
    And the problem is that there are two sender agreements. Although the services are different, XI is not able to find the correct sender agreement to be used. After deleting the second second agreement, I'm able to send the  respective message....
    Can anyone give me a hint on how to solve this problem?

    Hi,
    this is done by different AS2 subjects. The sender agreement is selected based on this. So create separate AS2 receiver adapters for every message you need and put there different message subjects.
    So if you'll have 3 AS2 receiver channels with subjects:
    MessageType1_DE
    MessageType1_US
    the AS2 adapter will work like following:
    first it tries to find an exact message subject, if it is found, message is "assigned" to this sender agreement. If no exact message matches the subject, then wildcards are used. (this mechanism is described in the Seeburger AS2 guide).
    If you are getting 403 HTTP code, there may be also problem with authentication certificates.
    Another problem may be, you don't have configured AS2 receiver channel for current subject.
    Does this help you? Or you meant it another way?
    Peter
    p.s. check the answer above my post, Vardharajan's right
    Edited by: Peter Jarunek on May 19, 2008 2:11 PM

  • Can SAP XI AS2 Adapter process flat files? Pl. tell me how to configure it

    I have a requirement to read and write delimited ASCII flat files using the AS2 adapter in SAP XI. The AS2 adapter should be able to read from delimited ASCII Flat files and also write to delimited ASCII flat files. Kindly let me know how to configure the AS2 adapter so that it can read and write delimited flat files. I badly need to know this configuration for a client requirement which requires file processing by the AS2 adapter in XI 7.0. Thanks in advance

    Hi,
    Is the requirement is to just read the flat file and process it ? if so, u can use File Adapter provided , ur source system provides u the data in the file format in the some directory
    following thread discussions may help u -AS2 adapter-
    Seebuger AS2 adapter for XI as sender for multiple messages
    Seeburger AS2 Adapter
    Hope this helps,
    Regards,
    Morthy

  • Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!!

    Hi AS2 experts,
    *When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
    1. I used the following parameters in AS2 Module.
    ModuleName                                                       Module Key
    localejbs/Seeburger/solution/as2                              solutionid
    localejbs/ModuleProcessorExitBean                          exit
    ModuleKey    ParameterName         ParameterValue
    exit                JNDIName     deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
    Iam getting the following error.
    Success     MP: Processing local module localejbs/Seeburger/solution/as2
    Error :   MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
    Error :  Exception caught by adapter framework: Object not found in lookup of as2.
    Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
    2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
    It is showing the below error like AS2ID is missing.. but its there in party configuration.
    Error :
    Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..       
    Can anyone has idea what might be wrong.
    Kindly suggest me asap.
    Thank You.
    Regards
    Seema.

    Hi,
    Plesae go through below links
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    EDI Adapter by SeeBurger
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
    B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
    Integrating XI with SeeBurger
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
    and
    Check with below configuration
    Configuration for AS2 or simple file adapter.
    We are using this module configuration for converting EDI D96A format to XML:
    1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
    2 localejbs/CallSapAdapter Local Enterprise Bean 0
    bic destSourceMsg MainDocument
    bic destTargetMsg MainDocument
    bic logAttID ConverterLog
    bic mappingName See_E2X_ORDERS_UN_D96A
    bic saveSourceMsg ORIGINAL_EDI
    can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
    basically,I need mapping name for this.
    Scheme=AS2ID
    Name = WAN network no of the partner who is sending the file
    Sender AS2 adapter configuration:
    Few changes in the module parameter tab.
    localejbs/CallBicXIRaBean bic
    CallSapAdapter 0
    Module configuration:
    bic= destSourceMsg = MainDocument
    bic= destTargetMsg = MainDocument
    bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
    Receiver AS2 adapter configuration:
    When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
    1. Define the channel as a Receiver channel on the Parameters tab
    2. The last step ensures the module sequence is complete:
    Make sure the module ModuleProcessorExitBean does exist in the module sequence:
    Module Name=localejbs/ModuleProcessorExitBean
    Type=L
    Module Key=Exit
    • with the following module parameter:
    Module Key=Exit
    Parameter Name=JNDIName
    Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
    File receiver:
    localejbs/CallBicXIRaBean bic
    CallSapAdapter 0
    Module configuration:
    bic= destSourceMsg = MainDocument
    bic= destTargetMsg = MainDocument
    bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
    ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
    Thanks
    Swarup

  • How to deal Inhouse files using Seeburger AS2 adapter...!!!

    Hi all,
    Has anyone managed to configure the Seeburger AS2 adapter for XI successfully to process multiple inbound message types.
    We have an issue here with inbound messages being received by the AS2 adapter. We currently have it configured for inbound deliveries(Which deals with EDI files) which is working fine. The issue is that we would now like to send other messages as well. It seems the AS2 adapter only looks at the sender/receiver party combination to determine the correct sender agreement, but does not look at the message type which is a limitation. I have heard mention of a splitter module which can be used to distinguish between different messages and pass them to the correct sender agreement for processing, information on this is thin on the ground to non existent.
    I have few custom Inhouse files where i need to recieve through AS2 adapter.
    I need to differentiate the messages hitting to my communication channel.
    ex:
    1st message will be having
    HDR PICKS
    2nd message will be having
    HDR PURCH
    so based on the second field which has "PICKS" or "PURCH" , i need to pass the message to run the corresponding map.
    How i need to configure to acheive these kind of custom Inhouse files through AS2 adapter??
    Do i need to use splitter for these as well?? If yes how i need to use?
    Is there any setting we can make at Sender AS2 adapter to differentiate each message??
    Waiting for the answers.
    Kindly reply if anyone knows.
    Thanks&Regards
    Seema.

    Hi,
    i have setup a scenario with edifact (different message types) using as2.
    first i had to create a mapping using bic.
    edifact_xxxx
    in: edifact_service
    out: functional acknowledgement.
    in the mapping code i adjusted the called mapping, standard it will use see* changed it to e2x* (custom mapping)
    in your case using flatfiles maybe you should take a look at the VDA structure, these files are also defined under inhouse.
    when you define a input file adapter are you getting a classifier message?
    like
    <classifier><type>Edifact</type><classifierMappingID>XXXX</classifierMappingID><encoding>US-ASCII</encoding><additionalIdentifier></additionalIdentifier></classifier>

  • Seeburger AS2 Adapter with HTTPS transport

    The AS2 adapter is generating the following error.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection., SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection.
    According to documentation, the SSL Certificate  (keystore) field should point to the keystore, and not a  specific key.  in my communication channel it does.  Thep rivate key points to my key.  I have verified both of these entries are correct.
    Other than that, this scenario is configured the same as my previously configured scenarios that use HTTP, all working without issue.

    Thank you, we had already done that.
    What we found however was the entry for the "keystore" in the communication channel, we needed to fully name the key to be used, as opposed to simply the keystore.
    Once we did that, we cycled the as2 adapter and were able to send a message successfully.

  • EDIINT AS2 Adapter in SAP XI

    Dear experts,
    I need to install an EDIINT AS2 adapter into my SAP XI.
    Have anybody can provide me the steps how to do this?
    Where can I get/download the AS2 adapter?
    Best regards,

    Hi,
    AS2 Adapter developed by Seeburger for EDI data. This is not free, we have to take the liecence from Seeburger, after buy the AS2, they will give us one package, that package contains some pdf files.
    how to install the AS2 adapter and converter mapping designer for XI, ......... files are available in that package, so by following that pdfs we can install the Adapter and configuring the mapping designer,.......

  • SEEBURGER AS2 adapter test

    Hi
    I am trying to test AS2 adapter. I configured sender file channel and Receiver AS2 channel. i also configured the mdn report channels. But my AS2 receiver channel is failing saying mdn report channels are missing.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but appropriate report channel is missing. Missing inbound relation between AS2From: 'XXXX_Qx2' and AS2To: 'XYZ_QX1'., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but appropriate report channel is missing. Missing inbound relation between AS2From: 'XXXX_Qx2' and AS2To: 'XXXX_Qx1'.

    Hi,
    Please check following thread
    Re: File ->AS2 error?
    Regards,
    Deepak.

  • I am not able to send/receive text message on my N...

    Hello:
    I bought a Nokia 5800 in India last summer. I used a local SIM card (Airtel) when I was there. I was able to send/receive text messages when I was in India.
    I came back to Chicago and replaced the Airtel SIM card on my 5800 with my AT&T sim card. I have a pay-as-you-go service with AT&T. I had used a Sony-Ericsson Z300a phone with my AT&T service before I bought my 5800. I did not have any problems sending/receiving text messages with the Sony-Ericsson phone using my AT&T SIM card.
    I don't have any problems using my 5800 with my AT&T SIM card for calling or sending/receiving multimedia messages. I just cannot send or receive any text messages. I have checked the message center number setting on my 5800 and it appears to be correct. I have also done a hardware reset of the 5800 and the problem remains.
    Any clues?

    Hello parsar. Even if you have the correct Message Center number there, it's worth a try to delete the existing one and enter the correct one afresh. Make sure you have the latest firmware on your phone, and that there are no applications that may interfere with sending/receiving sms, like some filtering software.
    Hope this helps
    And, pakiboy, resetting to factory settings (by typing *#7780#) will NOT delete anything in the phone memory.
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Maybe you are looking for