Seeburger Adapter Scenario

Hi Frnds,
I want See Burger ,CIDX Adapter end to end scenario with screen shots, If anybody know link or having end to end scenario pls share to me its too urgent.
Regards,
Raj

Hi Rajshekar,
The SEEBURGER FTP/VAN Adapter is responsible for transmitting files according to the File Transfer Protocol, with the particular support of various VANs. This protocol was installed as a user gateway protocol by several of the largest VAN providers, such as IBM, GE and Sterling IIB and Sterling Commerce.
The FTP/VAN adapter must be configured in the configuration part of the Integration Builder. The adapter is based on the Adapter Framework and is executed by the SAP J2EE Adapter Engine.
The FTP/VAN Adapter supports the following protocols:
IBMIE VAN, all report options.
GEIS (GeMarkIII) and GeMark3000, all report options, report file is only extracted, if needed.
EXITE (ECODEX), EDIFACT file processing, DISPATCHED reports.
Sterling Commerce and Sterling IIB.
MCI EDI*Net.
The following FTP options are supported:
SSL, both IMPLICIT and AUTH_TLS support, server authentication.
All popular FTP proxy types like: USERWL, USERWOL, SITEWL, OPENWOL.
Active and Passive connection modes.
"KeepAlive" feature.
Binary, ASCII and custom transfer types.
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
AS2 vs OFTPS:
AS2 & OFTPS
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration
https://www.sdn.sap.com/irj/sdn/forums
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Regards,
Vinod.

Similar Messages

Bsi mapping in seeburger adapter

hi experts,
i want to know about bic mapping in idoc to edi scenarios in which i am using seeburger adapter.please help me and provide me some documentation.

Hi,
BIC is mapping tool which converts EDIFACT to EDI_XML.
You will be accepting EDI flat file i.e. csv file and using BIC you will map it 1:1 mapping ....this flat file will be converted into EDI_XML after mapping.
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Regards,
Akshay Jamgaonkar.
Don't forget to reward points.
Message was edited by:
Akshay Jamgaonkar

Seeburger Adapter Module Error

Hi
I have a scenario orders idoc to x12,I have done bic maaping & deployed sda file to SDM.And the paramater i have defined at the adapter module
bic mappingname
bic destTargetMsg
bic destSourceMsg
And the error i am getting is
2007-04-16 16:13:51 Success process()
2007-04-16 16:13:51 Error process()
2007-04-16 16:13:51 Error process()
2007-04-16 16:13:51 Error MP: exception caught with cause java.lang.NullPointerException
2007-04-16 16:13:51 Error Exception caught by adapter framework: null
2007-04-16 16:13:51 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
2007-04-16 16:13:51 Error The message status set to NDLV
Any hep would be highly appreciated
Thanks
sri

Hi Sriram,
Which Seeburger Adapter are you using to transmit your converted X12 message?
Rgds,
Sam Raju
null

Sender / Receiver ID mapping for EDI interfaces and Type of seeburger adapt

We need to set up a interface using Seeburger adapter for Purchase order IDOC to 850 EDI mapping.. After reading from SDN,
1) We can use the standard mapping in BIC MD to do E2X and X2E mapping..
2) We can use any of the AS2, EDI generic adapter, Seeburger FTP adapter or Seeburger SFTP adapter...
How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security...
Also how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID
Also the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping.

Hi Kris,
I had worked in the somehow same scenario, It was IDOC to EDIFACT file.
I can give you few clues which might be helpful
In BIC MD you have to create your own mapping if the standard mapping is not available (First check all the standard mappings in BIC). For your reference you need X2E mapping, as your scenario is IDOC to 850 EDI.
"the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping."
In graphical mapping i created my own mapping, Seeburger has given some sample mappings you can check those for your reference (SEEBURGER_GENERIC_EDI software component). Mostly you have to create your own. You need a document from your functional consultant so that you are able to map correct fields and constants.
"how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID"
This has been generally hardcoded in message mapping (In my case i hardcoded). If any of ur IDOC field contains that data you can map that field. But better Idea is ask your functional expert.
"How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security... "
You can choose adapter according to your requirement. In my case i used File adapter as i have to create file in PI server only. My suggestion you can use SFTP for seeburger
Hope these points are helpfu for u
Regards,
Shradha

Seeburger Adapter

Hi all,
I have installed a generic seeburger FTP adapter, but I dont have any VAN connectivity at present. Can I convert the EDI ANSI X12 format to xml with this installation or it requires VAN connectivity to do this.
In this case do we require the BIC mapper? if so how to work with BIC mapper?
In the communication channel, I am able to see the installed Seeburger FTP adapter but it does not show the transport and message protocol. Is this related to the Installation/setup of VAN connection.
Regards,
Nithiyanandam

Hello..
SeeBurger is a leading provider of global business integration solutions.
Market launch of the most successful EDI solution for the automotive industry in 1986.
the company today serves more than 7,000 customers in 42 countries and more than 15 industries through its flagship B2B Gateway and related products and services.
First company worldwide to receive certification for SAP R/3
Building a closer partnership with SAP.
Extended any-to-any-conversion.
The SEEBURGER Business Integration Converter (BIC) is an Any-To-Any Format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex,high performance XML-to-XML mappings or to interface to existing JDBC Data Sources.
Supported EDI formats include: ANSI, EDIFACT, INHOUSE, IDOC, XML Schema, XML DTD, CSV,Delimited Data, positional data, SWIFT, EANCOM and many more.
Mapping Designer, a graphical tool, easily defines data format conversions via drag and drop functionality, enabling easy integration between source and destination files. A central mapping reposiu00ADtory enables comprehensive support of versioning and deployment support, such as self-testing and auditing.
The SAP Exchange Infrastructure message format is based on XML, but it also can work with non-XML data using attachments. In some cases it may be necessary to convert the main XML document in a message, into a non-XML document. The use of BIC is very common in Business-to-Business scenarios where EDI standards are in use.
The Business Integration Converter (BIC) of Seeburger is based on Java JIT Technology and can be used for small real-time messages, as well as very large master data (i.e.Catalogs) batches.
BIC can convert outbound invoices from XML format (used in SAP XI) to an EDIFACT invoice. The conversion can be executed before the message is transmitted to the business partner. The other way around, once an EDIFACT message has been received from the business partner, it must first be converted to XML format, which is the format SAP XI supports.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. BIC will allow you to do the following
Once you install BIC, you need to do Import the Generator Mappings into the Project Explorer of BIC MappingDesigner.
You can find Generator Mappings as a ZIP file in the following location <BICMappingDesignerInstallationDirectory>\user\bicmd\Exchange and select the file prj_GeneratorMappings.zip.bicmd.
In MappingDesigner select File Import Generator Mappings Zip File prj_GeneratorMappings.zip.bicmd Clik on Add and OK.
Once Import is done you can see Generator Mappings in BIC Mapping Designer.
The SEEBURGER Adapter runs on the SAP WEB AS (J2EE Engine)
The SEEBURGER Adapter is integrated into the SAP Exchange Infrastructure over JCA (Java Connector Architecture)
Consequence :
Supply of the complete SEEBURGER EDI/B-to-B-Technology-Suite within SAP NetWeaver
Central File of Business Content (mappings, integration processes) in the Integration Repository of SAP XI
Central configuration and design by using the Tools of XI in the configuration
Central monitoring and alerting over SAP XI
Seeburger Solutions Overview
BIC Mapping Module
Functional Acknowledgement Solution
Operational Dashboard / Archiving
Invoice Solutions
Communication
The Business Integration Converter (BIC) from SEEBURGER is a converter for the implementation of data formats.
Following formats are available:
ANSI X.12 (American National Standards Institute)
CSV (Comma Separated Variable formats)
EDIFACT (all subsets)
INHOUSE (VDA, flatfiles, e. g. SAP IDoc)
SWIFT (banks)
TRADACOM (Trading Data Communications Standard)
XML (DTDs and SCHEMATA)
Able to classify messages into the following message types:
XML
EDIFACT
Ansi X 12
Tradacom
VDA
IDOC
Swift
Inhouse
XML Ansi X 12
XML EDIFACT
XML Tradacom
XML VDA
XML IDOC
Go through this links..
Some more..
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Reward Points if it is really useful to you.....
Thanks,
Satya Kumar..

Issue in receiver SFTP seeburger adapter

Dear all,
We have a proxy to sFTP scenario.
The target message is being delivered to a sFTP system using a receiver sFTP Seeburger adapter.
I have this error being shown in the receiver channel.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true, >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true.
The Seeburger WorkBench monitoring has a 2 error entries which says
1. PUT command for file <TEMP_20110406_115127.TXT> is in progress.
2. "Error on send, will be retried"
Finally, the .txt file is partially written in the receiver system.
If anyone has any inputs/pointers to resolve this issue. Pls share the details.
regards,
Jack.

Hi Jack,
We are also facing the same problem with the seeburger SFTP adapter. If you find the solution , Plz let us know.
Thanks,
Soumya.

SFTP Seeburger adapter - Could not find channel for report handling between

Hello Friends ,
We have R3 -> PI-> SFTP scenario . The messages are transferred successfully and the file is successfully received at the receiving end . But when we do communication channel monitoring , we see errors in Receiver CC . The Reciever CC contains SFTP adapter (Seeburger) . Recently the Seeburger adapter is upgraded and the below error has started occuring then onwards .
Error Message which we see in CC monitoring for Receiver CC (SFTP) is as below .
Initiation of Transmission Report( job id: da405030-30c6-11df-8b6e-797b8921162c milestone: 290) failed! Exception occured: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) - com.seeburger.xi.connector.fw.ConfigurationException: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) [3/16/10 8:40 AM]
Could experts help me ...
Thanks for your time .
Regards,
Laxman Nayak .

Hi,
I also have the error you mentioned but we're implementing the Seeburger SFTP adapter for the first time.
I've requested transport acknowledgements in my ABAP proxy and have checked the 'Deliver transmission report' flag in the adapter but I don't know what else I must do.
Any help would be greatly appreciated.
Thanks,
Alan

Help wid Seeburger Adapter

Hey guys
i urgently need help in Seeburger adapter,actually i have a scenario where in i m getting EDI directly from VAN or from seeburger adapter over XI,and i have to post this information to R/3 server,can anyone provide me with some links about how to start off with this scenario.
do i need to do any configuration over XI?how will i use the seeburger adapters ,any information will be really appreciated
thanx
ahmad

HI,
There are seeurger adapters, we can use , but we can use also with the file with seeburger modules also. Its all depends upon the what type of seeburger adapter was installed on your server and what are all the modules installed.
Any way see the below links on seeburger..
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Please let me know if you have any queries..
Regards
Chilla..
<i>Points rewarded if it is usefull..</i>

SEEBURGER adapter - How much does it help?

We have a PI box just installed and we'll be implementing a few EDI transactions with some business partners.
I was told that SEEBURGER is the preferred EDI adapter for EDI transmissions from PI (XI).
1 - How much does SEEBURGER help the development of PI EDI interfaces? Is there a way to estimate on how much work is saved using it instead of relying on standard? (lets say 10, 20 or 30%)?
2 - I am considering here 2 options (Use SEEBURGER or not). Is there a better alternative?
Thanks
Leonardo

Hi,
For EDI implementation there are ways by which u can implement with XI
1) Using third party seeburger adapter.
2) Conversion agent
3) Writing module.
Preferred one is seeburger.
1) It has std XSD available which we just need to import into External definition
2) It has std mappings for all the message type which converts EDI to XML and XML to EDI format.
3) Provides different adaters
4) BIC tool
5) Many adapter modules.
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
It provides std mapping program which does the conversion of EDI to XML and XML to EDI which need to used in XI comm channel module tab.
Thnx
Chirag

Seeburger adapter information

Hi All,
I need information about iWay Seeburger adatpeter.how to do mapping .pls send any sample weblogs or scenarios regarding Seeburger adapter.please send to me any documents of seeburger adapter.My mail Id is [email protected]
Thanks & Regards..
Ramesh

Hi,
><i>I need information about iWay Seeburger adatpeter.</i>
SeeBurger and Iway are 2 separate vendors providing Adapters to Integrate XI with various applications!
SeeBurger Provides adapters for EDI and Iway provides adapters for PeopleSoft etc
SeeBurger~~
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a --> Good theorotical info!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33 --> Gives an overview of Installing the EDI adapters in the 3rd section and also leads you to the entire Installation guide!!
Iway~~
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
/people/vedavyas.cuntheepuram/blog/2005/04/02/publish-messages-in-tib-from-xi
Regards
Bhavesh

Mail Adapter Scenario ----- Need help

Hi All
Again with same mail adapter scenarios .
I am trying to send my e-mail on Microsoft Exchange server to a FTP server .
So flow is like Mail system->XI-> File system.
While configuring sender mail adapter , i gave the following URL imap://S4DE8PSAANH.ibm.com/InBox as i am using IMAp4 as the protocol.
Now i have set of doubts and questions for which i need input from you all
a>I am still seeing my sender communication channel with green light (running ), its not picking up any new mail i came to my inbox. Any reasons why it did not pick up ?
b> Now to set up Receiver Determination and Interface Determination , i need to have inbound interface created, but here when my requirenent is just to send a e-mail content as XML to fle system , what interface should i use or how should i create a interface with interface mapping or message mapping ?
c>Any idea whether just configuring a sender mail adapter with certain poll interval will result in a XML message that can be seen in SXMB_MONI txn ? Or do i need to fullly set up my receiver system and complete whole configuration of the entire flow.
My intent is just to get a simple mail body into XI , how do i achieve it ?
I gave URL as imap://S4DE8PSAANH.ibm.com/InBox , still i did not get any XML message in SXMB_MONI txn ..or should i give IP address of my exchange server instead of S4DE8PSAANH.ibm.com ? ...
Can we see a XML message if only a sender communication channel is set up with no receiver ? .. I am just wondering why new mail in my inbox is not getting picked up into XI.
Thanks a lot to all who helped to me earlier , i guess i rewarded points to all those who guided me : -) and will do same again as promised.
Please help .
Thanks and Regards
rohan

Hi Rohan -
Here's what I can tell you:
- if the hostname is wrong, you'll get a 'UnknownHostException'.
- if the path (e.g. Inbox) is wrong or doesn't exist, you'll get a 'IOException... The requested item could not be found'.
- if you don't configure user authentication, you'll get a 'NullPointerException'.
This is all within Adapter Monitor - so since your mail CC status is green, we can only assume that your mail host is valid, your path is valid, and your user id/pwd is valid.
One thing to try, since 'Inbox' is common to any mailbox, try creating a new folder at the Inbox level (e.g. called 'Test1') and specify the URL as:
imap://S4DE8PSAANH.ibm.com/Test1
and see if your CC status is still green in the Adapter Monitor (make sure to look at the ID Cache Notifications and the timestamp in the adapter monitor).
Outside of this, SP9 is relatively old. You should patch your XI system as soon as you get a chance - with or without this problem.
Regards,
Jin

CIDX -XI-IDOC adapter scenario???????? urgent?? pls help

Hi Frnds,
I want to develop scenario between CIDXXIIDOC..
if any one having documentation about CIDX
any scenario withs screene shots share to me...
share any useful links,
what are challenges i wil face while developing CIDX adapter scenario
anyone help me out.. its very urgeNT......
Regards,
RAJ

Hi,
CIDX Adapter is Chemical Industry standard for data exchange in B2B scenarios. It uses XML formatted in different manner specific to Chemical industry.
In order to use this, you need to purchase the license.
There are xml schemas provided by CIDX for each transaction like Order Create, Order change, shipping instruction etc..
You need to download the once which are required in your scenario and use the same.
For overview of CIDX in general you can visit http://www.cidx.org
This might give u an business scenario -http://www.rexsoft.com/sci/Rex_CPI_XI_Configuration_Testing_Business_Package.pdf
Hope this helps too...
http://help.sap.com/saphelp_nw04/helpdata/en/23/cb22419e2ab167e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f4/622c41eda5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d5/351941fcdbf56fe10000000a1550b0/frameset.htm
Check this basic guide too..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/915dc712-0b01-0010-a99a-fb2fdfa5ddc2
Check these forum replies too..
CIDX and R/3
Please reward points.
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 5, 2008 8:37 AM
Edited by: Vijaya Lakshmi Palla on Jun 5, 2008 8:42 AM

Mail adapter scenario

Hi
I require some input on including a mail adapter to an existing scenario
The scenarios is as follows,
I have to create some files around 20 and place them in two folders , that build has been done and tested , so I have a multi mapping , for those 20 files , and enhanced interface determination and is working fine
Now a new requirement is to send an email ,
kindly tell me the steps in IR and ID to include the mail adapter in this interface ??
considering it as an additional feature, nthing to do with Files ,,,
which means that an email adapter has to be called with the file adapters ( not before not after....the precedence doesnt matter )
its just that along with creating the files an email has to be sent ... thats all
I want to know what am i required to create :
in IR : is there a separate interface required .. smthing to do in mapping also ? i am presuming not since it is inbound
in ID : can i create a dummy busines service and what all do i need to create ???
please help
thanks
Dev

Hi,
You create a message type for mail adapter and an message interface. You can also use the predefined message type from sap. So now in multimapping you add this message type and map from your source to this mail mapping. Add the same message interface in interface mapping.
Create a mail receiver communicaiton channel with your mailbox parameters. Then add this to your receiver determination. Also you need to create a receiver agreement for this one.
You can see some help here:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
You can do a search for more blogs and tutorials on mail adapter.
Regards,
---Satish

Help Required on File to Mail Adapter scenario

Hi all,
Can someone give me some links or material regarding the step by step procedure to configure a file to mail adapter scenario (including the design and configuration). I have already gone through help.sap.com, but I need more clarification. So please guide me accordingly
Regards
V.Kartik

Hi Karthik,
     Also check these links on File to Mail adapter scenario:
    Blogs:
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    /people/sap.user72/blog/2005/06/08/sending-attachments-in-mails
    Sap File on Mail Adapter:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
    Also check these similar threads:
    How to implement file to mail scenario
    What is the process for sending file thru email using Mail Adapter ???
Regards,
Subhasha Ranjan

EDI SEEBurger Adapter

We are evaluating XI for ANSI X12 EDI , Have some EDI Quesitions using SEEBurger Adapter.
1) Does SEEBurger Adpater has ANSI X12 Enveloping and De-Enveloping capabilities ??? If Yes,how this is configured /Developed.
2) Does SEEBurger Adapter has capability of generating sequential ISA control numbers by Trading Partner ??? If Yes,how this is configured /Developed.
3) Can It perform EDI Structure validation based on the EDI standard rules (For eg: Looping structures, Element qualifier restriction list .....)

Hi,
Seeburger is a tool which will conver any type of standard EDI format into XML.
All standard EDi mappings are predefined in seburger,we have to install in XI Server and use that standard mappings.
Check this links
SEEBURGER
http://www.seeburger.com
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Phani
Reward Points if Helpful

Seeburger Adapter Scenario

Similar Messages

Maybe you are looking for