Seeburger AS2: Error while parsing AS2 message: AUTHENTICATION_ERROR #
Hello all,
unfortunaltey we get follow error back, if we receive a message from our partner:
Error while parsing AS2 message: AUTHENTICATION_ERROR #
The channel setup is correctly ( I think)
(Sender Agreement:)
By the Aapter-Specific Attributes:
AS2 Sender Configuration
Authentication Certificate: <Certificate of the Partner>
AS2 Receiver Configuration
Decryption Key: Private Key from us
Signing Key: Private Key from us
The MDN Channel has setup follow:
AS2 Sender Configuration
Authentication Certificate: <Partner Certificate>
The AS2 Communication Channel has setup as follow:
AS2
disable Authentication required
Asynchrones MDN
Server Certificate <Partner's Certificate>
Private Key for Client Authentication is empty
But always we get the message back as I put in the topic.
Any ideas ?
Thanks for your help
Hi Stephen
From the configuration side everything looks fine.
I strongly believe that some configuration at your partner side must be wrong.
For testing purpose, if you have BIS Spoke please create a dummy configuration and send message to PI.
First test with Disabling certificate authentification and then with certificate
Regards,
Dhanish
Similar Messages
-
AS2 Adapter Error: Error while parsing AS2 message: AUTHENTICATION_ERROR #
Hi,
Following Scenario: Inbound.
i have been receiving messages via Seeburger AS2 Adapter with the following Error message
Error while parsing AS2 message: AUTHENTICATION_ERROR #
I have done the following in the AS2 adapter as per findings in the forum
1. Unchecked the Authentication Required Flag.
2. AS2 Certificates are fine.
3. Use Authentication: Disabled (there is no authentication)
even though every thing seems to be fine i am not able to receive messages successfully. Please let me know what could have gone wrong here.Hi Venkatesh,
>> Everything is provided in the Sender Agreement. Partners Certificate, Self Encryption & Signing certificate
How come you are using encryption when you are receiving the message. I think it might be decryption.
1. Anyway please cross check whether you provide the following correct details in Sender agreement.
Sender Configuration
Authentication Certificate : Partner's public certificate.
AS2 Receiver Configuration
Decryption Key : Own private key.
Signing Key : Own private key.
2. Can you please check and tell in the Seeburger Monitoring for the incoming message, whether they are sending the message with encryption and signing? This you can check in the Seeburger Monitoring. -
Error while parsing AS2 message: AUTHENTICATION_ERROR #
Hi Experts,
While a Trdae Partner is trying to send a file through AS2 Seeburger, we are getting this error,
"Error while parsing AS2 message: AUTHENTICATION_ERROR # "
in Seeburger tool and could not able to receive the file from the Trade Partner.
Can you please suggest any solutions.
Thanks,
KumarHi Kumar,
The trading partner is sending you a signed message and this needs to be authenticated in SAP PI. This authentication is done via the "Authentication Required" checkbox in the AS2 sender channel. Also, in the sender agreement, you need to give correct values for the authentication certificates for this partner so that you are able to authenticate, decrypt & process the message in PI.
In case you have access to the Seeburger Installation, you can take a look at the AS2 Config guide which explains more about this error.
>>> Error while parsing AS2 message: AUTHENTICATION_ERROR
Cause:
An incoming AS2 message cannot be authenticated.
Solution:
- Check the authentication certificate settings.
- Disable the u201Cauthentication requiredu201D flag, if messages without authentication are to be received.
Hope this helps.
Regards, Gaurav -
Error while parsing AS2 message: DECRYPTION_ERROR in Seeburger Workbench
Dear all,
In our production SAP PI 7.1 server, we are getting the below error in the Seeburger Workbench screen.
Error:
State Error on receive, task will not be retried
"State Description Error while parsing AS2 message: DECRYPTION_ERROR # com.seeburger.ediint.edi.EDIMessageException: message decryption failed: failed to decrypt message: provider BC not found"
Imp points to note are:-
1. This error is not specific to one interface. 3-4 interface messages have this error.
2. And even for a particular interface that has this error, we could see that some messages are getting processed without any issues, and some error out, so we are not in a position to conclude anything.
Because of the above issue, many business critical messages are pending to be processed.
If any one has encountered this before error, pls share your inputs to resolve this or any workarounds to temporarily handle the issue will be appreciated.
Thanks,
YounusHello Younus,
We are facing exactly same problem in some of our scenarios.
It is strange that this error doesn't occur all the time ,only some messages fail with this error.
I know ,this is a worst approach,but as we couldn't find any solution,we have adopted a workaround to request partner to resend the message and this works well .
Thanks.
Regards,
Shweta -
IMAP error messages "Error while parsing IMAP response"
I'm getting thousands of IMAP errors every hour, can I shut those off?
My console log is flooded with them and it keeps me from seeing anything else
in the system log. The IMAP errors happen continuously while Mail.app is running.
It looks like debug output from Mail.app !?!
IMAP server is Beehive Server -- it's my company email so I need to use it.
Windows Outlook (Windows 7) shows no errors, possibly they're silently ignored
on Windows. My disk is writing almost continuously when Mail.appo is running.
Sample error: (thousands are generated per hour)
Apr 8 10:29:18 Js-Coolio-iMac.local Mail[22903]: Error while parsing IMAP response (null): Incomplete response
Remaining text: < Gian Luigi<br>>
Full text: < Gian Luigi<br>>
Any idea how to shut these off? I reinstalled Mavericks, no improvement as expected
since this seems to be Mail complaining about IMAP protocol issues.
Thanks in advance for any suggestions. And yes I've rebooted, reinstalled the IMAP account,
reinstalled Mavericks, etc.
Entrecheck follows...
Hardware Information:
iMac (27-inch, Late 2009)
iMac - model: iMac11,1
1 2.8 GHz Intel Core i7 CPU: 4 cores
12 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 9 days 20:39:45
Disk Information:
ST31000528ASQ disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (801.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Seagate Backup+ Desk 3 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
JOHN TM (disk1s2) /Volumes/JOHN TM: 2 TB (1.81 TB free)
LIU TM (disk1s3) /Volumes/LIU TM: 500 GB (203.45 GB free)
Untitled 3 (disk1s4) /Volumes/Untitled 3: 499.39 GB (498.94 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Griffin Technology, Inc iMic USB audio system
Apple, Inc. Keyboard Hub
Logitech USB Trackball
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 4
Kernel Extensions:
com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.barebones.textwrangler.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] net.culater.SIMBL.Agent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.leadertech.PowerRegister.SEA1.7c77b2ab072a21a06107fccae868ff4b.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
User Login Items:
Flux
smcFanControl
SpeechSynthesisServer
AdobeResourceSynchronizer
Flux (13.0)
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 3rd-Party support link
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
RealPlayer Plugin: Version: (null) 3rd-Party support link
AdobePDFViewerNPAPI: Version: 10.1.3 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
MRJPlugin: Version: 1.0-JEP-0.9.0 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 10.1.3 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
Ghostery: Version: 5.1.0
AdBlock: Version: 2.6.18
Turn Off the Lights: Version: 2.3.0.5
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 3rd-Party support link
WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
RCDefaultApp
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Java 3rd-Party support link
MenuMeters 3rd-Party support link
Old Applications:
asannotation2: Version: 10.21.26.0 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/924/asannotation2.app
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/1224/convertpdf/convertpdf.app
Neverwinter Nights 2: Version: 1.23.1765 - SDK 10.5 3rd-Party support link
Amazon MP3 Downloader: Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
TurboTax Deluxe 2011: Version: 2011.r17.007 - SDK 10.4 3rd-Party support link
Ventrilo: Version: 3.0.13 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/1224
Cisco WebEx Meeting Center: Version: 1207.04.2732.10 - SDK 10.5 3rd-Party support link
asannotation2: Version: 8.25.31.0 - SDK 10.5 3rd-Party support link
atmsupload: Version: 4.14.29.0 - SDK 10.5 3rd-Party support link
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 184.55 GB
Destinations:
JOHN TM [Local] (Last used)
Total size: 2
Total number of backups: 51
Oldest backup: 2014-01-09 05:11:53 +0000
Last backup: 2014-04-04 08:40:29 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 184.55 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% EtreCheck
0% SystemUIServer
0% com.apple.WebKit.Networking
0% softwareupdated
Top Processes by Memory:
344 MB Safari
258 MB mds_stores
258 MB com.apple.IconServicesAgent
172 MB softwareupdated
172 MB soffice
Virtual Memory Information:
3.05 GB Free RAM
5.12 GB Active RAM
2.71 GB Inactive RAM
1.05 GB Wired RAM
7.04 GB Page-ins
15 MB Page-outstry Mail is not syncing an imap account correctly
(https://discussions.apple.com/message/21904088#21904088) , it just worked for me. -
while editing via GPMC we are getting below error Encountered an error while parsing” will occur if the .adml files missing in the %windir%\PolicyDefinitions\en-US
Mukesh SainiHi sainimuk,
Remember that the ADML-files are language specific and stored in language specific folders. The ADLM-files is used to present information in ADMX files in a localized manner.
To create the Central Store:
ADMX-files goes here:
\\domain.com\SYSVOL\domain.com\Policies\PolicyDefinitions
ADML-files goes here:
\\domain.com\SYSVOL\domain.com\Policies\PolicyDefinitions\EN-US (For US English)
\\domain.com\SYSVOL\domain.com\Policies\PolicyDefinitions\NB-NO (For Norwegian)
\\domain.com\SYSVOL\domain.com\Policies\PolicyDefinitions\KO-KR (For Korean).. and so on...
So if you have your EN-US folder populated with all relevant ADML-files, but open GPMC from, lets say a Workstation with Norwegian language, it will try to access the nb_NO Folder. If no files are there, an error is presented.
For all i know, maybe some of your ADMX / ADML files are broken.
It should be no problem to re-download them and replace the ones you are having problems with.
Download ADMX (With ADML-files for 34 languages) for Windows Server 2008 here:
http://www.microsoft.com/en-us/download/details.aspx?id=14355
-tsh -
Getting the following error while parsing the values usng xml parser
Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
-- PARSE INPUT FILE
FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
-- GET DOCUMENT
DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
LOAD_SUPP(doc);
ELSE
DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
AjeshBesides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers -
Error while parsing or executing XML-SQL document
friends,
my scenario is based on file to jdbc.i am facing an error in receiver CC in RWB.
The error states that '
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'MATMAS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]String or binary data would be truncated.'
My SOAP xml message is
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header>
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:TimeSent>2008-02-06T22:30:21Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>ECC</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>BS_JDBC</sap:Service>
</sap:Receiver>
<sap:Interface namespace="http://file_to_jdbc">MI_JDBC_RECEIVER</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
</sap:ReliableMessaging>
- <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">
sapecc50\sapmnt\trans</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">UTF-8</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">matmas1.txt</sap:Record>
</sap:DynamicConfiguration>
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
- <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
<sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:Info />
</sap:Hop>
- <sap:Hop timeStamp="2008-02-06T22:30:21Z" wasRead="false">
<sap:Engine type="IS">is.01.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
<sap:Info>3.0</sap:Info>
</sap:Hop>
- <sap:Hop timeStamp="2008-02-06T22:30:22Z" wasRead="false">
<sap:Engine type="AE">af.e6e.sapecc6eval</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>18f17dd0-d503-11dc-cb4d-001635b02bfd</sap:MessageId>
</sap:Hop>
</sap:HopList>
- <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:TraceLevel>Information</sap:TraceLevel>
<sap:Logging>Off</sap:Logging>
</sap:Diagnostic>
</SOAP:Header>
- <SOAP:Body>
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
<sap:Name>MainDocument</sap:Name>
<sap:Description />
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
and payload message is
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
- <STATEMENT>
- <ROW action="INSERT">
<TABLE>MATMAS</TABLE>
- <access>
<MATNR>38</MATNR>
<MTART>HALB</MTART>
<MATKL>00107</MATKL>
<MEINS>pc</MEINS>
<ERSDA>2008.04.05</ERSDA>
<BRGEW>10</BRGEW>
<NTGEW>12</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>88</MATNR>
<MTART>FERT</MTART>
<MATKL>02004</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2008.04.05</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>13</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>89</MATNR>
<MTART>FERT</MTART>
<MATKL>02004</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2008.03.02</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>14</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>98</MATNR>
<MTART>HALB</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2006.09.01</ERSDA>
<BRGEW>12</BRGEW>
<NTGEW>12</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>170</MATNR>
<MTART>NLAG</MTART>
<MATKL>4</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2005.03.02</ERSDA>
<BRGEW>2</BRGEW>
<NTGEW>3</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>178</MATNR>
<MTART>NLAG</MTART>
<MATKL>4</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.03.06</ERSDA>
<BRGEW>3</BRGEW>
<NTGEW>4</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>188</MATNR>
<MTART>NLAG</MTART>
<MATKL>5</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.05.02</ERSDA>
<BRGEW>2</BRGEW>
<NTGEW>3</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>288</MATNR>
<MTART>HALB</MTART>
<MATKL>101</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2006.02.11</ERSDA>
<BRGEW>5</BRGEW>
<NTGEW>4</NTGEW>
<GEWEI>KG</GEWEI>
</access>
- <access>
<MATNR>358</MATNR>
<MTART>HAWA</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.09.09</ERSDA>
<BRGEW>500</BRGEW>
<NTGEW>500</NTGEW>
<GEWEI>G</GEWEI>
</access>
- <access>
<MATNR>359</MATNR>
<MTART>HAWA</MTART>
<MATKL>2</MATKL>
<MEINS>PC</MEINS>
<ERSDA>2007.08.01</ERSDA>
<BRGEW>20</BRGEW>
<NTGEW>10</NTGEW>
<GEWEI>G</GEWEI>
</access>
</ROW>
</STATEMENT>
</ns0:MT_JDBC_RECEIVER>
Could anybody help me in sorting out this issue.My advance thankshi,
ypur structure is bad defined.
if you want to do an insert, the DT should be
<ns0:MT_JDBC_RECEIVER xmlns:ns0="http://file_to_jdbc">
___<StatementName>
______<dbTableName action=INSERT>
_____<table>MATMAS</table>
_______ <access>
___________<MATNR>38</MATNR>
___________<MTART>HALB</MTART>
___________<MATKL>00107</MATKL>
___________<MEINS>pc</MEINS>
___________<ERSDA>2008.04.05</ERSDA>
___________<BRGEW>10</BRGEW>
___________<NTGEW>12</NTGEW>
___________<GEWEI>KG</GEWEI>
______</access>
_____</dbTableName>
__ </StatementName>
</ns0:MT_JDBC_RECEIVER>
the ROW field is used when you wait receive data from DB for example you execute and SQL Query from Sender communication channel "SELECT name FROM TABLE Names"
so, the result of this query would be, for example:
<row>
____<name>joge</name>
</row>
<row>
____<name>pepe</name>
</row>
<row>
____<name>nicola</name>
</row>
See this link
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Feb 8, 2008 8:40 AM
Edited by: Rodrigo Pertierra on Feb 8, 2008 8:42 AM -
Error while parsing or executing XML-SQL document attribute "action" missin
Hi All,
I am doing a scenario for IDOC to JDBC, When I push IDOC from R/3 , IDOC sent to XI System successfully,
I have also checked in SXMB_MONI it is showing the successful staus without any errors, and I have also copied the xml structure from main document of payloads and tested the mapping in Integration Designer, and it is showing successfull message.
here is the xml structure from payloads of Request Message Mapping ........
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
- <COGRP_TMP_PROC action="EXECUTE">
<IDOCNUMBER isInput="TRUE" type="CHAR">1000001</IDOCNUMBER>
<E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
<E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
<E1COGH_MSGFN isInput="TRUE" type="CHAR">1</E1COGH_MSGFN>
<E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">1</E1COGH_GROUPTYPE>
<E1COGH_GROUPNAME isInput="TRUE" type="CHAR">1</E1COGH_GROUPNAME>
<E1COGH_KOKRS isInput="TRUE" type="CHAR">1</E1COGH_KOKRS>
<E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
<E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
<E1COGHT_LANGU isInput="TRUE" type="CHAR">2</E1COGHT_LANGU>
<E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">2</E1COGHT_DESCRIPT>
<E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">2</E1COGHT_LANGU_ISO>
<E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
<E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
<E1COGV_FROMVALUE isInput="TRUE" type="CHAR">6</E1COGV_FROMVALUE>
<E1COGV_TOVALUE isInput="TRUE" type="CHAR">6</E1COGV_TOVALUE>
<E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
<E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
<E1COGS_SUBGROUP isInput="TRUE" type="CHAR">4</E1COGS_SUBGROUP>
<E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
<E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">6</E1COGHR_HIGHERSEGMENT>
<E1COGHR_SNAME isInput="TRUE" type="CHAR">3</E1COGHR_SNAME>
<E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">3</E1COGHR_PRTCLASS>
<E1COGHR_AUTHGR isInput="TRUE" type="CHAR">3</E1COGHR_AUTHGR>
<E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
<E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGSR_HIGHERSEGMENT>
<E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">5</E1COGSR_XSUPPRESS>
<E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">5</E1COGSR_PRTCLASS>
<E1COGSR_LNAME isInput="TRUE" type="CHAR">5</E1COGSR_LNAME>
<E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
<E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">9</E1COGVT_HIGHERSEGMENT>
<E1COGVT_LANGU isInput="TRUE" type="CHAR">7</E1COGVT_LANGU>
<E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">7</E1COGVT_DESCRIPT>
<E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">7</E1COGVT_LANGU_ISO>
<E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
<E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">12</E1COGVR_HIGHERSEGMENT>
<E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">8</E1COGVR_XSUPPRESS>
<E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">8</E1COGVR_PRTCLASS>
<E1COGVR_LNAME isInput="TRUE" type="CHAR">8</E1COGVR_LNAME>
</COGRP_TMP_PROC>
</ns0:RTACOGRP_RECEIVER_MT>
When I checked for component monitoring in runtime workbench....
these are the messages........
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)</i>
Here are the messages from message monitoring ......
2007-06-07 12:42:17 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2007-06-07 12:42:17 Success JDBC adapter receiver channel RTACOGRP_COM_Chan: processing started; party , service WSORTABS
2007-06-07 12:42:17 Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
2007-06-07 12:42:17 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
2007-06-07 12:42:17 Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
2007-06-07 12:42:17 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
2007-06-07 12:42:17 Error The message status set to NDLV.
Can any body please resolve the problem.....
Thanks in Advance
MurthyBhavesh,
Now I have changed the data structure , and the resultant structure is like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:RTACOGRP_RECEIVER_MT xmlns:ns0="http://prospecta.com/wsorta/cosmas/idoc2jdbc">
- <Statement>
- <COGRP_TMP_PROC action="EXECUTE">
<IDOCNUMBER isInput="TRUE" type="CHAR">100002223</IDOCNUMBER>
<E1COGH_NUMBER isInput="TRUE" type="CHAR">1</E1COGH_NUMBER>
<E1COGH_HIGHERSEGMENT isInput="TRUE" type="CHAR">1</E1COGH_HIGHERSEGMENT>
<E1COGH_MSGFN isInput="TRUE" type="CHAR">H</E1COGH_MSGFN>
<E1COGH_GROUPTYPE isInput="TRUE" type="CHAR">H</E1COGH_GROUPTYPE>
<E1COGH_GROUPNAME isInput="TRUE" type="CHAR">H</E1COGH_GROUPNAME>
<E1COGH_KOKRS isInput="TRUE" type="CHAR">H</E1COGH_KOKRS>
<E1COGHT_NUMBER isInput="TRUE" type="CHAR">1</E1COGHT_NUMBER>
<E1COGHT_HIGHERSEGMENT isInput="TRUE" type="CHAR">2</E1COGHT_HIGHERSEGMENT>
<E1COGHT_LANGU isInput="TRUE" type="CHAR">T</E1COGHT_LANGU>
<E1COGHT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGHT_DESCRIPT>
<E1COGHT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGHT_LANGU_ISO>
<E1COGV_NUMBER isInput="TRUE" type="CHAR">1</E1COGV_NUMBER>
<E1COGV_HIGHERSEGMENT isInput="TRUE" type="CHAR">3</E1COGV_HIGHERSEGMENT>
<E1COGV_FROMVALUE isInput="TRUE" type="CHAR">V</E1COGV_FROMVALUE>
<E1COGV_TOVALUE isInput="TRUE" type="CHAR">V</E1COGV_TOVALUE>
<E1COGS_NUMBER isInput="TRUE" type="CHAR">1</E1COGS_NUMBER>
<E1COGS_HIGHERSEGMENT isInput="TRUE" type="CHAR">5</E1COGS_HIGHERSEGMENT>
<E1COGS_SUBGROUP isInput="TRUE" type="CHAR">S</E1COGS_SUBGROUP>
<E1COGHR_NUMBER isInput="TRUE" type="CHAR">1</E1COGHR_NUMBER>
<E1COGHR_HIGHERSEGMENT isInput="TRUE" type="CHAR">7</E1COGHR_HIGHERSEGMENT>
<E1COGHR_SNAME isInput="TRUE" type="CHAR">R</E1COGHR_SNAME>
<E1COGHR_PRTCLASS isInput="TRUE" type="CHAR">R</E1COGHR_PRTCLASS>
<E1COGHR_AUTHGR isInput="TRUE" type="CHAR">R</E1COGHR_AUTHGR>
<E1COGSR_NUMBER isInput="TRUE" type="CHAR">1</E1COGSR_NUMBER>
<E1COGSR_HIGHERSEGMENT isInput="TRUE" type="CHAR">8</E1COGSR_HIGHERSEGMENT>
<E1COGSR_XSUPPRESS isInput="TRUE" type="CHAR">S</E1COGSR_XSUPPRESS>
<E1COGSR_PRTCLASS isInput="TRUE" type="CHAR">S</E1COGSR_PRTCLASS>
<E1COGSR_LNAME isInput="TRUE" type="CHAR">S</E1COGSR_LNAME>
<E1COGVT_NUMBER isInput="TRUE" type="CHAR">1</E1COGVT_NUMBER>
<E1COGVT_HIGHERSEGMENT isInput="TRUE" type="CHAR">10</E1COGVT_HIGHERSEGMENT>
<E1COGVT_LANGU isInput="TRUE" type="CHAR">T</E1COGVT_LANGU>
<E1COGVT_DESCRIPT isInput="TRUE" type="CHAR">T</E1COGVT_DESCRIPT>
<E1COGVT_LANGU_ISO isInput="TRUE" type="CHAR">T</E1COGVT_LANGU_ISO>
<E1COGVR_NUMBER isInput="TRUE" type="CHAR">1</E1COGVR_NUMBER>
<E1COGVR_HIGHERSEGMENT isInput="TRUE" type="CHAR">11</E1COGVR_HIGHERSEGMENT>
<E1COGVR_XSUPPRESS isInput="TRUE" type="CHAR">E</E1COGVR_XSUPPRESS>
<E1COGVR_PRTCLASS isInput="TRUE" type="CHAR">E</E1COGVR_PRTCLASS>
<E1COGVR_LNAME isInput="TRUE" type="CHAR">E</E1COGVR_LNAME>
</COGRP_TMP_PROC>
</Statement>
</ns0:RTACOGRP_RECEIVER_MT>
Now in message monitoring error is showing like this...
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
Now in Component Monitoring error is showing like this....
<i>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC' (structure 'Statement'): java.sql.SQLException: General error</i>
I have tested the stored procedure in sql by giving the same values , it was successfully executed..
Can you please tell me where is the error still in structure ...
Thanks in Advance,
Murthy. -
SQL*Loader-925: Error while parsing a cursor (via ocisq)
Receiving the following error message when trying to use SQLLoader (on NT) >>>
SQL*Loader-925: Error while parsing a cursor
(via ocisq)
ORA-00942: table or view does not exist
Trying to use the application for the first time, logon using userid for which sqlplus operates, and the table does exist under the user schema, as owner.
ctl and dat file are correct. Log file gives me no further detail of the errors.
Are there any configuration settings or something required for this app?
ThanksThanks Warren. I was concentrating more on the first line of the error.
You are right. The issue was of insufficient privileges. The table did not have all the necessary grants provided. -
System config network error while parsing /etc/hosts
I am configuring RAC on Oracle Linux,i have configured /etc/hosts on both nodes,when ever i opened network, its displaying error message.
system config network error while parsing /etc/hosts
wrong ip on line 25
wrong ip on line 26
wrong ip on line 27
here is my host entries.
node1
====
[root@racnode1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost
#####Public#####
192.168.1.101 racnode1.reg.com racnode1
192.168.1.102 racnode2.reg.com racnode2
192.168.1.103 racnode3.reg.com racnode3
192.168.1.104 racnode4.reg.com racnode4
####Private######
10.10.1.1 racnode1-priv.reg.com racnode1-priv
10.10.1.2 racnode2-priv.reg.com racnode2-priv
10.10.1.3 racnode3-priv.reg.com racnode3-priv
10.10.1.4 racnode4-priv.reg.com racnode4-priv
#####Virtual#####
192.168.1.201 racnode1-vip.reg.com racnode1-vip
192.168.1.202 racnode2-vip.reg.com racnode2-vip
192.168.1.203 racnode3-vip.reg.com racnode3-vip
192.168.1.204 racnode4-vip.reg.com racnode4-vip
#SCAN
#192.168.1.301 racdb-scan.reg.com racdb-scan
#SCAN
192.168.1.301 racnode1-scan.reg.com racnode1-scan
192.168.1.302 racnode2-scan.reg.com racnode2-scan
192.168.1.303 racnode3-scan.reg.com racnode3-scan
[root@racnode1 ~]# hostname
racnode1.reg.com
[root@racnode1 ~]#
node2 host entries
===========
[root@racnode2 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost
#####Public#####
192.168.1.101 racnode1.reg.com racnode1
192.168.1.102 racnode2.reg.com racnode2
192.168.1.103 racnode3.reg.com racnode3
192.168.1.104 racnode4.reg.com racnode4
####Private######
10.10.1.1 racnode1-priv.reg.com racnode1-priv
10.10.1.2 racnode2-priv.reg.com racnode2-priv
10.10.1.3 racnode3-priv.reg.com racnode3-priv
10.10.1.4 racnode4-priv.reg.com racnode4-priv
#####Virtual#####
192.168.1.201 racnode1-vip.reg.com racnode1-vip
192.168.1.202 racnode2-vip.reg.com racnode2-vip
192.168.1.203 racnode3-vip.reg.com racnode3-vip
192.168.1.204 racnode4-vip.reg.com racnode4-vip
#SCAN
#192.168.1.301 racdb-scan.reg.com racdb-scan
#SCAN
192.168.1.301 racnode1-scan.reg.com racnode1-scan
192.168.1.302 racnode2-scan.reg.com racnode2-scan
192.168.1.303 racnode3-scan.reg.com racnode3-scan
[root@racnode2 ~]#
i am not able to ping racnode1-priv or racnode2-priv.
from node1:
========
[root@racnode1 ~]# ping racnode2-priv
PING racnode2-priv.reg.com (10.10.1.2) 56(84) bytes of data.
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=2 Destination Host Unreachable
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=3 Destination Host Unreachable
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=4 Destination Host Unreachable
5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4002ms
, pipe 3
[root@racnode1 ~]#
from node2:
=======
[root@racnode2 ~]# ping racnode1-priv
PING racnode1-priv.reg.com (10.10.1.1) 56(84) bytes of data.
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=2 Destination Host Unreachable
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=3 Destination Host Unreachable
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=4 Destination Host Unreachable
--- racnode1-priv.reg.com ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms
, pipe 3
[root@racnode2 ~]#
any idea where configuration went wrong.
Thankshere is output, i can see lot of additional characters.
[root@racnode1 ~]# cat -vet /etc/hosts
# Do not remove the following line, or various programs$
# that require network functionality will fail.$
127.0.0.1 localhost.localdomain localhost$
#::1^I^Ilocalhost6.localdomain6 localhost$
$
#####Public#####$
192.168.1.101 racnode1.reg.com racnode1$
192.168.1.102 racnode2.reg.com racnode2$
192.168.1.103 racnode3.reg.com racnode3$
192.168.1.104 racnode4.reg.com racnode4$
####Private######$
10.10.1.1 racnode1-priv.reg.com racnode1-priv$
10.10.1.2 racnode2-priv.reg.com racnode2-priv$
10.10.1.3 racnode3-priv.reg.com racnode3-priv$
10.10.1.4 racnode4-priv.reg.com racnode4-priv$
#####Virtual#####$
192.168.1.201 racnode1-vip.reg.com racnode1-vip$
192.168.1.202 racnode2-vip.reg.com racnode2-vip$
192.168.1.203 racnode3-vip.reg.com racnode3-vip$
192.168.1.204 racnode4-vip.reg.com racnode4-vip$
#SCAN$
#192.168.1.301 racdb-scan.reg.com racdb-scan$
#SCAN$
192.168.1.301^Iracnode1-scan.reg.com^Iracnode1-scan$
192.168.1.302^Iracnode2-scan.reg.com^Iracnode2-scan$
192.168.1.303^Iracnode3-scan.reg.com^Iracnode3-scan$
[root@racnode1 ~]#
from node2:
========
[root@racnode2 ~]# cat -vet /etc/hosts
# Do not remove the following line, or various programs$
# that require network functionality will fail.$
127.0.0.1 localhost.localdomain localhost$
#::1^I^Ilocalhost6.localdomain6 localhost$
$
#####Public#####$
192.168.1.101 racnode1.reg.com racnode1$
192.168.1.102 racnode2.reg.com racnode2$
192.168.1.103 racnode3.reg.com racnode3$
192.168.1.104 racnode4.reg.com racnode4$
####Private######$
10.10.1.1 racnode1-priv.reg.com racnode1-priv$
10.10.1.2 racnode2-priv.reg.com racnode2-priv$
10.10.1.3 racnode3-priv.reg.com racnode3-priv$
10.10.1.4 racnode4-priv.reg.com racnode4-priv$
#####Virtual#####$
192.168.1.201 racnode1-vip.reg.com racnode1-vip$
192.168.1.202 racnode2-vip.reg.com racnode2-vip$
192.168.1.203 racnode3-vip.reg.com racnode3-vip$
192.168.1.204 racnode4-vip.reg.com racnode4-vip$
#SCAN$
#192.168.1.301 racdb-scan.reg.com racdb-scan$
#SCAN$
$
192.168.1.301^Iracnode1-scan.reg.com^Iracnode1-scan$
192.168.1.302^Iracnode2-scan.reg.com^Iracnode2-scan$
192.168.1.303^Iracnode3-scan.reg.com^Iracnode3-scan$
Edited by: Endeca on Apr 7, 2013 10:13 AM -
Error while activating any message mapping in IR: very strange
hi forum i m getting an error in IR while activating any messageMapping.
the error is too long to be posted....i m posting a few lines of that:
Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))Sudeep,
Let we try this way. I'm sure you might have some existing mapping objects in IR.
Try to change that object(Description give some name) and activate again the object.
Reply your results whether you are getting the same error.
One sec before changing the object just test the mapping and change the object.
Best regards,
raj. -
Error while creating candidate (Message no. HRRCF0001155)
Hi experts,
I am launching recruiters page thorugh NWBC. While creating external candidate application, I am getting this error -
Error while creating candidate
Message no. HRRCF0001155
In SLG1, below is error analysis -
@5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 186 @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 118 @35\QLong text exists@ @16\QDetail exists@
@8N\QCancel@ Business partner 824 already exists @5F\QNo long text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE============CM002 line 132 @35\QLong text exists@ @16\QDetail exists@
Please help.
Thanks,
NehaHi Nicole,
Thank you very much for the reply. You are correct, but I checked the SICF set up was ok. Currently we are not using the workflow. Recruiter's role assignment was also proper.
This problem was related to business partner number range assignment for internal/external candidates, since it was not creating new business partner. It is ok now.
Regards,
Neha -
"Error while reading Exceptions" - Message No. /SCMB/ORDER 351
Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCNHello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard -
Error while processing audit message
hi
I'm running a reconciliation, and throws me the following error .
please help me
ERROR,28 Aug 2009 03:50:32,492,[XELLERATE.AUDITOR],Error while processing audit message
java.lang.NullPointerException
at com.thortech.xl.audit.engine.AuditEngine.processSingleAudJmsEntry(Unknown Source)
at com.thortech.xl.audit.engine.AuditEngine.processOfflineNew(Unknown Source)
at com.thortech.xl.audit.engine.jms.XLAuditMessageHandler.execute(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.AuditMessageHandlerMDB.onMessage(Unknown Source)
at sun.reflect.GeneratedMethodAccessor26.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.RunAsInterceptor.invoke(RunAsInterceptor.java:31)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.MessageDrivenConsumer.onMessage(MessageDrivenConsumer.java:347)
at com.evermind.server.ejb.MessageDrivenConsumer.processMessages(MessageDrivenConsumer.java:233)
at com.evermind.server.ejb.MessageDrivenConsumer.run(MessageDrivenConsumer.java:169)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595)Seems like Article ID: 864906.1
Cause
The cause of this problem is, the entries in aud_jms table which were not processed
after run "Issue Audit Messages Task" schedule task are not complete audit entries.
Solution
1. Run the following query.
select IDENTIFIER from aud_jms where aud_class='UserProfileAuditor'
IDENTIFIER is the usr_key.
Save the output of above query into text file. lets say a.txt, the a.txt will looks like........
a.txt
122896 122896 122997 122999 122999
122986
122997
2. Delete the all entries (rows ) from aud_jms table
3. Run the GenerateSnapshot.sh/GenerateSnapshot.bat using following parameter.
GenerateSnapshot.bat -inputFile E:\OIM9101\XLServer\xellerate\bin\a.txt -missingSnapshots -username xelsysadm -password xelsysadm -numOfThreads 2
Where E:\OIM9101\XLServer\xellerate\bin\a.txt is the location of text file which is created in Step1.
4. Run the "Issue Audit Messages Task" schedule task
Maybe you are looking for
-
How do i quiet finder?i can't force quiet or relaunch finder. it says' "finder not responding". Therefore I couldn't shut down. I've tried to force shut down & restart several times. but still finder won't quiet. Any idea please???? I am using a mac
-
Samsung s5230 phone, Bluetooth, HP Color LaserJet CM2320 MFP
Hello! I'm new here so please forgive my mistakes. I have a Samsung s 5230 phone and a HP Color LaserJet CM2320 MFP. The phone has the option to print pictures, sms and e mails via a printer that has bluetooth. I don't want to buy a printer, so I tho
-
Business Area/profit Center Accounting
Dear All I need your sugesstion we neet to create the Financial statement at plant level. for that Business are is ok or Profit center Accounting.? what would be the benfit that you sugsest?
-
When we run F110,DME file is generating when we download. We want in .csv format Please tell me the configuration or program. JABEEN
-
IOS 6 Wi-Fi Issue (Campus Captive Portal)
Hey there, I know some of people facing Wi-Fi connection problems after iOS 6 update. There are a lot of threads and solutions about this problem. But mine is bit different. I have an iPad and after i update to iOS 6 there wasn't any issue about Wi-F