Seeburger AS2 installation

Hi,
We have to install Seeburger AS2 adapter in PI 7.3. So, In order to install it First do we need to install Seeburger base components and later the AS2 adapter. Can you please suggest on this. I want to know like the sca files which are seeburger base components
1)SeeBaseToolsPI.sca
2)SeeExtendedToolsPI.sca
3)SeeModuleCollectionPI.sca
4)SeeSolutionIdModulePI-as2.sca
have to be deployed first using JSPM with the option Single Support Packages and Patches (advanced use).
and next AS2AdapterPI.sca using JSPM.
Can anybody suggest on this.
Thanks & Regards,
Smith

Hello
Do you have the Seeburger Master Installation Guide? This comes with the software and documents all the necessary steps for the installation process.
1) Install the SEEBURGER Software Component Version (import tpz file into the ESR)
2) Install the SEEBURGER Communication Service (this is part of SeeBaseToolsPI.sca) via JSPM
3) Install the SEEBURGER Tools Sets (these are the 2 base components SeeBaseToolsPI.sca and SeeExtendedToolsPI.sca)
4) Install the adapters and any additional modules you require
SeeBaseToolsPI.sca and SeeExtendedToolsPI.sca must be installed first. Then the adapters. I'm not sure of the exact option in JSPM that you must chose but I think it is the Single Support Packages and Patches (advanced use).
Regards
Mark

Similar Messages

Seeburger AS2 Communication Channel Error

Hello,
when trying to send a test message to the AS2 receiver communication channel I get the following error in communication channel monitoring:
javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: ResourceException caused by com.seeburger.xi.api.cci.SeeXIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., ResourceException caused by com.seeburger.xi.api.cci.SeeXIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
Have you ever got a similar error? Seems to be a configuration error of the adapter installation itself rather than a problem with configuration objects or the receiver channel.
Do you have any idea?

Hi Florian,
Please provide info if there is a need for any Sender agreement in case we select "Synchronous" mode for MDN and Handle Received MDn as "NoAction".
I am also getting the below error for my scenario (IDOC --> XI --> AS2)
Description: AS2 Adapter failure Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.. com.seeburger.as2.AS2Plugin.execute
Thanks and regards
Ajay Garg

Seeburger AS2: MD5WithRSAEncryption NoSuchAlgorithmException

Hello,
we use a AS2 receiver communication channel with SSL encryption. However when sending out a message we get the following error.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: MD5WithRSAEncryption, provider: BC, class: org.bouncycastle.jce.provider.JDKDigestSignature$MD5WithRSAEncryption), SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: MD5WithRSAEncryption, provider: BC, class: org.bouncycastle.jce.provider.JDKDigestSignature$MD5WithRSAEncryption)
We already checked that all Java Policy Files have been deployed. We have also tested the adapter successfully.
Any ideas on this?
Thank you!

Hi Florian,
have you checked the following:
-Installation of the Java Cryptography Extension?
-Did you deploy SeeCryptoSourceBridgeLibXI.sda? (Seeburger Certificate Service)
-The Exception "java.io.IOException: java.security.NoSuchAlgorithmException: Error constructing implementation" could also point to a problem in the Keystore:
--> Did you create an Adapter User to access the Keystore?
--> Check if you have set the view_creator role of the keystore you are using to EVERYONE.
--> Maybe your certificate is corrupt?
regards,
Daniel

Content based receiver determination with Seeburger AS2 adapter

We are planning to use the Seeburger AS2 adapter on our XI 3.0 installation to post custom XML documents to XI from external business partners. The problem we have is to do the receiver and interface determination based on the xml message type that is submitted. How can we identify what is the name of the root xml node (which is representing the message type that was submitted to us) during the receiver determination and specify conditions for the receiver determination based on this? We can not use the Seeburger Classifier module here as this is only determining the mapping name to be used for an EDI conversion but can not handle any type of XML message.

Rudy,
I think the easiest way would still be the ReceiverDetermination and creating an XSD that contains the main important TAGs from the different messages.
That should allow you to test for the existing of certain important TAGs or check the value of some TAGS.
I don´t know about aedaptive-adapters, but I don´t think that they are Drummond-Certified. Check out...
http://www.drummondgroup.com/html-v2/as2-companies.html
Without this certification, a lot of your partners might not allow you to use this adapter if you wanna make AS2 with them.
Greetings
Stefan

Download SEEBURGER AS2 Adapter

Hi All,
I would appreciate if you could let me know, from where I could download the SEEBURGER AS2 adapter which will be compatible to PI 7.10 EhP1?
Regards,
Ramanathan EKAMBARAM

Hi Hemant,
We have it installed on our current PI 7.0 environment and have the necessary license. However, when I look into Installations and Upgrades - Entry by Application Group - Adapters - Seeburger - XI-A GENERIC EDI BY SEEB., I could see only NW71-PI-A GEN SEEB 2.1 and not SEEBURGER AS2.
Let me know, if SEEBURGER AS2. contains NW71-PI-A GEN SEEB 2.1.
Regards,
Ramanathan EKAMBARAM

When we need Seeburger AS2 & FTP?

Hi,
when we can make use of Seeburger AS2 and FTP?what are the differences?advantages and dis advantages?
And also how can we install AS2 ?I know how to install Seeburger FTP.
thank you,

HI,
I think this question is repeating several times ,
read previos questions and close those posts.
When we are integrating the EDI with XI we need seeburger Adapters
See the below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
The complete installation manuals can be supplied by the seeburger vendors.
the adapter specific installations you can find in those manuals
Regards
Chilla..

As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

Hi,
There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
Kindly provide your inputs to help me resolve this.
Thanks,
Ruchi

Hi Ruchi,
500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
Regards,
Udo

There is no key entry with such alias in keystore seeburger AS2

Hi,
Error message in RWB shows the following
Message entered module processor exit bean and will be transferred to JCA adapter
2011-04-06 06:19:29 Success SEEBURGER/AS2: Received order from system.
2011-04-06 06:19:29 Error Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiExc
2011-04-06 06:19:29 Error Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.
2011-04-06 06:19:29 Error The message status set to NDLV.
2011-04-06 06:19:29 Error MP: Exception caught with cause javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ks
unable to send / receiver messages through AS2. Please let us know what could be the error. How/ where to resolve it.

Please check the SDN thread below
AS2 Adapter Configuration to Customer / no signature certificate
Also, check the help page below
http://help.sap.com/saphelp_sm40/helpdata/DE/84/be18d66b2a47f6b4adc704a7c0e23e/content.htm
for instructions on how to get the "SEEBURGER EDIINT AS2 Adapter for SAP Exchange Infrastructure Configuration Guide" from the Service Marketplace. Then, on this guide, please check the configuration according to your sender or receiver communication channel regarding the Security (certificates) parameters.
Are the key Store entries imported correctly? Please check if the certificates were imported in the right order and none of the certificates on the chain are expired.

Seeburger AS2 comm channel problem (B2B) - "perhaps AS2ID missing"

Hi guys!
We try to configure B2B scenario using Seeburger AS2, but communication channel monitor returns error:
Error type: COMPONENT_ERROR,NOT_TRANSMITTED >> Error date: 9/25/07 10:05 AM >> Description: AS2 Adapter failure Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:321) [9/25/07 10:05 AM]
We're not sure about the scenario configuration and using identifiers (cos' this is probably the problem).
Did someone of u already configured Seeburger AS2?
We have configured in receiver party alternative identifier Seeburger - AS2ID, however, the message sent to target has always agency XI and scheme XIParty. It should be probably Seeburger and AS2ID (the alternative one).
<SAP:Receiver>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">XXXX</SAP:Party>
<SAP:Service>BS_3RD_XXXXX</SAP:Service>
<SAP:Interface
How to achieve it?
Thanx a lot!
Peter

Hi Anoop!
Yes, we use it on receiver side.
ModuleProcessorExitbean exists, so it should be ok.
What I'm not sure about is the thing with identifiers..
In Party (let's call it X) - Identifiers, we have default agency http://sap.com/xi/XI, scheme XIParty and name X.
What values should be there for Seeburger?
We have Agency: Seeburger, Scheme: AS2ID; Name: X.
Is it correct?
We also received some 9 char long number - probably some ID to adapter(?). Any idea, if it is necessary and where to use it?
Is it necessary to configure identifier seeburger also in Identifiers tab of Receiver communication channel? Or we can leave it empty (both- sender, receiver)?
We use this in B2B scenario, of course: Target system is party, but we use our R/3 as Business System w/o party. Is it ok, or do we laso have to "be" as Party in our configuration scenario?
A lot of questions, but points will be awarded 4 sure
Thanx!
Peter

Seeburger AS2 HTTPS receiver channel error

Hi,
I am getting the following error in the receiver Seeburger AS2 channel with HTPS connection and going through a proxy to the Partner.All the certificates have been installed,proxy server information gives,mentioned the key store values and encryption certificate values have been mentioned in the receiver agreement that is using the channel.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection., SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection.
Can you please give me an idea whether I am missing something or any configuration settings I need to make.
Thank you,
Sri

hi Neetesh,
Thank you for the link.The first thing I have looked at is the link you gave me.But when I give with * it is complaining that it is not able to retrieve the certificates.
TRUSTED/AS2CERTS/*,but I have backward slashes..may be OS is different ,I think the original poste might have Windows servers.
any other ideas please.
thank you.

Com.seeburger.ksm.cryptoapi.exception.CryptoApiException in Seeburger AS2

Hi Experts ,
I am facing some very weird issue of getting below error whenever I try to enable the Encryption in my Receiver AS2 Seeburger Adapter :
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user.
But the moment I send data without signing and encryption it goes well. We have tried placing certificates in receiver agreement and in key store.
Thanks
Abhishek

Prateek ,
Thanks we were able to identify the user to be mentioned but now we are facing below error while using certificates with SH1withRSA Encryption and in receiver channel Encryption algorithm as 3DES :
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: org.bouncycastle.cms.CMSException: key inappropriate for algorithm., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: org.bouncycastle.cms.CMSException: key inappropriate for algorithm.
The problem doesnt ends here ... while our partner trying to send us data to the URL we have provided its getting 403 Forbidden Error. We have tried resolving the steps which were given in manual but again the sxase is same.
URL : http://server:port/SeeburgerAS2/AS2Server
Any inputs if you can provide on the above 2 errors .
Thanks
Abhishek

Seeburger AS2 Reciever error: 404

Hi
Configuring and activating the interface for AS2 receiver channel is loggin error in RWB:
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 404 %2Fhttp%3A%2F%2FBlueberry%2ECommu%2Ecom%3A4080%2Fas2NotFound
Pls can any help be offered to fix this issue?
Regards
Prabhu

Hi Prabhu,
Check the belowlinks
403 Forbidden error in a Secured B2B (EDI XI) connection
Http* Errors in XI
Make sure that SAP/XI/Engine is active in SICF transaction.
Regards,
Venkata Ramesh

SEEBURGER AS2: AS2 Adapter failure -- CryptoApiException: Access Denied.

Hi,
I am trying to send AS2 message to my partner by using Certificates and I am getting the following error at AS2 receiver adapter.Looks like it doesn't have User Credentials to access the certificates.But we provided all the details.We are not sure where it is going wrong.
2008-08-30 14:49:42 Error Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed:com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Access Denied., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Access Denied.
Can anyone please suggest us what is missing and where it is going wrong?
Regards
Stephano

Hi,
1) First of all create the Seeburger Certificates.
2) You have to deploy those certiates in your Visual Administrator.
After that in Interration Builder -
> Receiver Agreement -
> In Security Settings -
>
                   AS2 Sender Configuration -
> Signing Key -
>give the certificate name over there.
                   AS2 Sender Configuration -
> Encription Certificate & Authenitication Certificate is there
                   u have to give u r certificate names over there.
Thanks,
Satya Kumar

Client Auth and SSL with Seeburger AS2 adapter

Hello All,
We are using the Seeburger AS2 adapter in our landscape and I am in the process of setting the same up and have made quite some progress in all my issues.
and I hope that you will be able to help me out.
1. Server SSL on Receiver AS2 adapter
I am sending a message from XI using the Receiver AS2 adapter to my AS2 test tool using Server SSL.
This is working perfectly fine. In my AS2 adapter I have selected HTTPS as the protocol and the message goes via SSL to the target test tool, is processed and the MDN comes back to XI perfectly.
The issue here is :
Irrespective of what is provided in the Server Certificate ( Keystore) , the message goes to my target test tool. I even left this field blank with no certificate entry and still the SSL connection was established and the message went to the target system.
Is there no validation that XI does here? I am lost what is the use of this entry Server Certificate if XI blindly accepts all SSL connections.
I am using a Decentral Adapter Engine with LoadBalancer.
2. Client Auth on Receiver AS2 Adapter
I tried to perform Client Authentication by proving my Server's private key in the AS2 adapter. The corresponding public key is loaded in my partner's Keystore.
XI error's with the error "SSL handshake failed - Bad Certificate" .
I am not sure why XI is erroring out here and I have a feeling that I have misunderstood the use of the fields in the AS2 adapter,
Server Certificate ( Keystore) and Private Key for Client Authentication.
Has anyone tried this? If further details are needed, I will be able to furnish the same.
Regards,
Bhavesh

Hello Jens,
Thanks for your reply.
1. The Encryption and Signature part of the Interface is working absolutely fine and I use the same concept highlighted by you - The Sender always signs the message with his private key and encrypts with message with the partner's public key in the corresponding agreement.
2. Server SSL is also working perfectly fine, i.e, when XI initiates the connection the SSL connection is established to the partner.
3. Mutual Auth was the issue where I was getting the bad certificate issue.
To investigate further I moved the same setup to my Central Adapter Engine and all the issues I had described above seem to have vanished and things work exactly as I was expecting, ie.
The field : Server Certificate (Keystore) is used to provide the Target System's Server SSL's public Certificate.
The field : Private Key for Client Authentication is used where XI provides its own Server SSL's private key for Mutual / Client Authentication.
The problem seems to be with my Decentral Adapter engine and not my central adapter engine and so I guess,
1. I either have the incorrect certificates on my Decentral Adapter Engine.
2. I also have 2 instances of a Decentral Adapter Engine with a Webdispatcher and so maybe the 2 Visual Admin's of the 2 Decentral AE are inconsistent.
3. Maybe it was just a long day and I did something wrong
Will investigate further for the root cause but I am glad that my concepts remain intact and things do work as I expected them to work.
A blog on all this is on the cards sometime soon.
Cheers,
Bhavesh

Seeburger AS2/EDI sender configuration details

Hello All,
I am working in EDI interface for ANSI X12 using Seeburger AS2/EDI , As I am new to B2B interface I have one doubt regarding Transaction set identifier code,interchange sender and receiver ID , In case of B2B add on it is clearly configured on EDISeparator Sender Adapter under filter
but in case of Seeburger AS2/EDI I am not understanding where we can add this details ,
Thanking you
Sridhar

Hello Sridhar,
for incoming data, the Seeburger BIC-Adapter uses a mapping in the Module-Chain which automatically detects the following parameters
- MessageType and Version (e.g. ANSIX12_850_V4010) from ST segment
- Interchange Sender ID (from ISA segment)
And the MessageSplitter then allows to forward each combination to a specific SenderAgreement for processing the data in PI.
This example shows an entry in the "MessageSplitter" that assigns an 850 V4010 message from a partner with the Sender ID 11111111111 to a specific SenderAgreement to process the data...
Kind Regards
Stefan

Seeburger AS2 installation

Similar Messages

Maybe you are looking for