Seeburger AS2 - message does not arrive when "Athentication required" is ON

Hi guys!
If somebody of you is using the Seeburger Adapter:
I have an inbound scenario and everything works fine. But when I set "Authentication Required" flag to be ON, messages are refused. This is strange, because incoming messages are signed.
Any ideas, what could be wrong? There are several settings for certificates and maybe I have some wrong setting.. Does anybody have experience with this?
Thank you, Peter

Sai, you probably don't have experience with Seeburger AS2, do you? It works in a special way - that's why I'm asking people, who have experience with this..
But for clarification: My inbound Seeburger AS2 channel receives message scorrectly, but when I enable uthentication on it, AS2 messages are refused - so they are not in the AE, they are not in the IE.
Peter
p.s. I will not reward your answer, sorry
Message was edited by:
Peter Jarunek

Similar Messages

Respond with text message does not appear when phone locked.

Hi,
I have an iPhone 5S and have a very strange glitch that I am unable to overcome. Basically, when my phone is locked, I do not get the option to respond with text, I only get the "remind me later" option. When my phone is unlocked, however, the option is there. It is very strange and I cannot figure out why.
For the record, I also had the exact same probelm on the iPhone 5, in both IOS6 and when I upgraded to IOS7.
Would appreciate any help with this. Thanks.

The lack of a "reply with message" at the lock screen in ios7 has been frustrating; I appreciate finally getting pointed in the right direction.
A minor update for ios7.1.1 with iPhone 5s (perhaps specific to devices with Touch ID): for me setting what shows up in the Lock Screen is in Settings App > Touch ID and Passcode.

Rating message does not appear when deleting app

I've noticed lately when I delete an app from my Ipod touch, I don't get the message asking me to rate this app.
I'm using the latest OS build for my Ipod touch.
What setting do I go to to resolve this?

You're right, I managed to find the answer posted on techworld.com which originally appeared on Macworld.com
It does say the feature was omitted, but didn't say why.
thanks for the help

Seeburger AS2 Adapter: "MDN not signed"

Dear all,
we just updated our test system from XI 3.0 to PI 7.1. Now we are facing a problem with our Seeburger AS2 Adapter.
I sent out a message via AS2 and get the follwing error message in Seeburger AS2 Monitor:
"MDN not signed"
In the Receiver Communication Channel I checked the Option "Sign MDN". In XI 3.0 this Scenario was working perfectly. So I contacted our communication partner and asked them if our AS2 message really contained a request for a signed MDN. Our commnucation partner confirmed and sent the MDN as text file to me. This text file shows that the MDN is signed. So it seems that the Seeburger AS2 adapter does not notice that the received MDN is a signed one. But why? Do you have an idea?
Just for testing purposes I unchecked the "Signe MDN" option. In this case the transmission finished successfully.
Who can help?
Thanks
Michael

Dear Vikrant,
many thanks for your reply. But I am not sure if we are really facing the same issue as you described it in your article.
Currently we have this situation:
When I send out a message the Seeburge Workbench provides only the following error message:
"MDN not signed"
Via the Recovery Monitor I can check the received MDN. Here I can see that the MDN is signed and positive.
In the Runtime Workbench I checked the following:
1. In the Message Monitor (Adapter engine) the message is in status "System Error". Here are the details:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received.
Adapter Framework caught exception: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received.
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received..
2. The Communication Channel Monitor shows the following error messages:
Error type: REPORT_ERROR >> Error date: 12/14/10 12:02 PM >> Description: MDN not signed [12/14/10 12:02 PM]
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received.
I do not understand why the MDN is recognized as negative and unsigned even if the plain text version of the MDN shows that it is signed and positive.
In your article you recommend to create a sender communication channel for MDN and a corresponding sender agreement. We already did that in XI 3.0 to forward the MDN as STATUS IDOC to SAP ECC.
Maybe you have an additional idea?
Thanks
Michaek

Lync 2013 external to internal IM is slow or messages do not arrive

Hi,
I'm building a Lync 2013 setup on Windows Server 2012. Internal Lync 2013 standard server with Lync 2013 edge server in a DMZ. No federation.
Internally al users are able to chat, audio/video and conferance.
My problem is that external users are able to sign in and start a chat with an internal user but it looks like communication is only working in one way.
Example:
User 1 is external;
User 2 is internal;
User 1 starts IM with user 2 and says "hi"
User 2 receives the IM and accepts and is seeing the "Hi" messages from user 1.
User 2 reply's with "Hi" back and that messages does not arrive at user 2. Some time's not at all, some times after a minute or 2.
When user 1 is receiving the reply user 2 still see's the rotating dot's that the message is beeing send. and after a while user 2 receives: "This message may not have been sent to User1
because there was no response from the server."
The situation seems to occures only from internally to externally and also with both users externally. I cannot see any error's in the event logs of the Internal or Edge server. De debugging tools is showing me error's like:
Text: Message or one of its headers caused SIP transaction processing error
Result-Code: 0xc3e93f5b SIPPROXY_E_TRANSACTION_TIMEOUT
Text: Message was discarded by the application
Result-Code: 0xc3e93ec6 SIP_E_AUTH_CANNOT_CHALLENGE
Audio/video requests are also arriving at the other user but are unable to establish a connection.
I can't really figure out what is going wrong. Certificates are correct, i think firewall rules are in place otherwise i have no communication at all i'm guessing. Routes also seem ok.
Some help would be great
Regards
Pascal

Hi,
The internal user Lynctest is sending a message to pslijkerman who is connected externally.
User pslijkerman receives the messages but the lynctest user keeps seeing rotating dots (processing message or something) after 1 minute or so the following messages is displayed in the Lync Im screen for user lynctest.
======
This message may not have been sent to Pascal Slijkerman because there was no response from the server.
======
This is some logging from the internal lync server.
===========
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.056.0013034f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1304
Direction: incoming
Peer: srv-domain34.domain.nl:49510
Message-Type: request
BYE sip:[email protected];opaque=user:epid:L30jBQ2CP1G71x2KsIF2cAAA;gruu SIP/2.0
Start-Line: BYE sip:[email protected];opaque=user:epid:L30jBQ2CP1G71x2KsIF2cAAA;gruu SIP/2.0
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Route: <sip:SRV-domain34.domain.nl:5061;transport=tls;opaque=state:T:F;lr>;tag=BDBD058532075001772DF63E1A794C59
Max-Forwards: 69
Content-Length: 0
Ms-client-diagnostics: 52112;reason="Callee did not receive an ACK for the 200 OK"
$$end_record
TL_INFO(TF_DIAG) [0]226C.2528::04/09/2013-07:53:17.087.00130d06 (SIPStack,SIPAdminLog::WriteDiagnosticEvent:1207.idx(778))[2737352855] $$begin_record
Severity: information
Text: Routed a request that came from a server trusted for routing
SIP-Start-Line: BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
SIP-Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
SIP-CSeq: 1 BYE
Peer: 10.xx.xx.30:52211
Data: destination="[email protected]"
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00130d62 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1304
Direction: outgoing
Peer: 10.xx.xx.30:52211
Message-Type: request
BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
Start-Line: BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 10.xx.xx.37:5061;branch=z9hG4bK445B1BFE.41682B6C1B09AC7D;branched=FALSE;ms-internal-info="bajkITWtf7W6iXpPN4ntXDe2Uuk9SpjNhAw17jrz6DmT9sK2hB10T2EQAA"
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Max-Forwards: 68
Content-Length: 0
Ms-client-diagnostics: 52112;reason="Callee did not receive an ACK for the 200 OK"
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00130f28 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1306
Direction: incoming
Peer: 10.xx.xx.30:52211
Message-Type: response
SIP/2.0 481 Call Leg/Transaction Does Not Exist
Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 10.xx.xx.37:5061;branch=z9hG4bK445B1BFE.41682B6C1B09AC7D;branched=FALSE;ms-internal-info="bajkITWtf7W6iXpPN4ntXDe2Uuk9SpjNhAw17jrz6DmT9sK2hB10T2EQAA"
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Content-Length: 0
Ms-client-diagnostics: 52085;reason="Dialog does not exist"
$$end_record
TL_INFO(TF_DIAG) [0]226C.2528::04/09/2013-07:53:17.087.0013142e (SIPStack,SIPAdminLog::WriteDiagnosticEvent:1207.idx(778))[2737352855] $$begin_record
Severity: information
Text: Response successfully routed
SIP-Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
SIP-Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
SIP-CSeq: 1 BYE
Peer: srv-domain34.domain.nl:49510
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00131486 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1306
Direction: outgoing
Peer: srv-domain34.domain.nl:49510
Message-Type: response
SIP/2.0 481 Call Leg/Transaction Does Not Exist
Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Content-Length: 0
Ms-client-diagnostics: 52085;reason="Dialog does not exist"
$$end_record
============
Thanks
Regards
Pascal

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

When I try to create a new Message on my Mac, Messages does not bring up my Contacts

I have followed the instructions to setup Messages, I can send messages to the email addresses that I have memorized, but when I try to create a new Message on my Mac, Messages does not bring up my Contacts when I type in the search field for a person that has an iPad or iPhone.
This sems out of sorts for an Apple product. Their stuff normally just works.
For some reason, My Mac Mini with Mountain Lion doesn't recognize my contact names, or it isn't synched with my contacts...
Anybody else want to weigh in, please?
Thank you!

Hi,
I would point out that I did say...
Of course the Contacts List has to have people listed in it.
The Error seems to be that you have not even got an My Card.
The OS when the computer is brand new and you set up the first Admin Account should create at least once Card entry for the Address Book/Contacts which has the Head and Shoulders icon (the My Card)
The does presume the the first account on the Mac doers have a person's First name and Last name to work with.
Of course not everyone sets things up this way.
Anyhow
To Check the Contacts List open the app.
Go to the Preferences.
Go to the Accounts section.
This should list at least two "accounts
One is for Syncing with iCloud and the other is for storing the Info on the Mac itself
In System Preferences > iCloud you can only set up one Apple ID to be the iCloud ID.
If you do or have changed this you may have extra accounts in the Contacts > Preferences > Accounts
Uploaded with Skitch!
7:36 PM Thursday; September 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

You need to link your iPhone number to Messages - and Facetime if you use it. For Messages go to Settings>Messages>Send and Receive at>You can be reached by iMessage at. If your phone number is showing there, select it as your Contact address. If it doesn't appear in there, take a look at the end of this article for help.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support

How do I set up my MBP so that a message does not pop up when the power button is pressed?

When I press my power button on my retina a message that says "Are you sure you want to ..?"
How do I set it up so that that message does not pop up?
My friends keep turning off my computer..

Tell your friends to leave your computer alone. That's not the proper way to turn off your MBP. And no, that message cannot be turned off. It is a safety feature.

TS4036 the icloud backup "ok" message does not go away when I pouch it

the icloud backup message does not go away when I touch the "ok". acting like it is freezed! please help

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

My 10.6.8 macbook pro's DVD player won't play a movie from Netflix. The DVD does play on a 10.5 mb pro. So DVD is ok. Message says "not permitted" when I click play. Is there a compatibility issue? Or something else?

My 10.6.8 macbook pro's DVD player won't play a movie from Netflix. The DVD does play on a 10.5 mb pro. So DVD is ok. Message says "not permitted" when I click play. Is there a compatibility issue? Or something else?

Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry

My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them). I think this started with Maverick? Any solutions?

My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them). I think this started with Maverick? Any solutions?

one is gmail, one is a university email and they are both IMAP accounts (not that I know what that means)....

I've forgotten your password Baymel icloud when my resend the message does not appear anything and I can not activate the device

I've forgotten my password on icloud when i resend the message does not appear anything and I can not activate the device
any one help plz :'(

IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Please Get the iPod Touch User Manual for iOS 5

I'm trying to send a message from my new MacBook Air, I can type the message but when I hit enter the message does not go?

I'm trying to send a text message from my new MacBook Air, I can type the message but when I hit enter the message does not go.

Have you addressed the message to someone? Is that address capable of receiving text messages?
What happens when you hit enter?

When I click on a mail message in Yahoo! Mail the message does not load even though the status indicates 'Done.'

I'm running v3.6.11 & am using Yahoo! Mail (sbcglobal.net). When I click on an eMail in my Inbox to load the full eMail message, the message does NOT load but the 'status' in the lower left hand corner of the webpage indicates 'Done.'
This is a similar problem to the page not loading that I've seen in the Support Forum

Odd.
Before taking your last suggest I "tested" to see if the problem still existed and it has gone away.
I've not changed any settings.
(Can't remember if the problem is on my work computer or home computer. I'll test the home computer later today.)
Mark

Seeburger AS2 - message does not arrive when "Athentication required" is ON

Similar Messages

Maybe you are looking for