Seeburger AS2 messages Recovery

Hi,
we're using the AS2 Seeburger adapter and received some messages which were not processed due to error in the AE. Now they remain in the status:
"Error on receive, task will not be retried" with error "Cannot initiate received message to backend system AND max retry reached!".
I'd say it should be possible to recover them somehow, unfortunately, when I click the Recovery Monitor I have a message there: "No active component found and therefore no recovery data presentable ". What does it mean?
How can I make these messages to be processed?
Thanx,
Peter

Hi Frederic,
Thanks for your reply.
The constants were already set but there's no line on the recovery monitor, I'm only getting:
"Active component found, but currently there is no recovery data to show "
On the Message monitor I'm able to see the column but with no possibility of recover. Am I missing some initial configuration to set the necessary recovery jobs?
Thanks Frederic.
Hello Frederic, wrong information.
When I check the recoveryMonitor but only for the AS2 component I'm getting:
"No active component found and therefore no recovery data presentable"
which strengthens my idea of a missing job configuration.
What am I missing...?
Edited by: Gonçalo Mouro Vaz on Aug 26, 2008 7:09 PM

Similar Messages

Seeburger AS2 message signatures

Hi,
I have deployed the Seeburger AS2 adapter and it seems to work fin.
I would like to get a hold on the original signed messages both outgoing and ingoing direction. I have configured the dump parameter for seeburger, which gives 5-6 messages pr message send. The problem is I cannot find any of the IDs in XI, since XI uses a new GUID for the messages.
Have anybody found a way to store the Signatures in a meaningful way, which can be used in a dispute.
/regards
Daniel Graversen

I have not found a solution

Seeburger AS2 - message does not arrive when "Athentication required" is ON

Hi guys!
If somebody of you is using the Seeburger Adapter:
I have an inbound scenario and everything works fine. But when I set "Authentication Required" flag to be ON, messages are refused. This is strange, because incoming messages are signed.
Any ideas, what could be wrong? There are several settings for certificates and maybe I have some wrong setting.. Does anybody have experience with this?
Thank you, Peter

Sai, you probably don't have experience with Seeburger AS2, do you? It works in a special way - that's why I'm asking people, who have experience with this..
But for clarification: My inbound Seeburger AS2 channel receives message scorrectly, but when I enable uthentication on it, AS2 messages are refused - so they are not in the AE, they are not in the IE.
Peter
p.s. I will not reward your answer, sorry
Message was edited by:
Peter Jarunek

Seeburger AS2 -Message Dumping

Hi All,
We are able to receive and send message from and to third party mail box successfully. But when we enable message dumping for debugging via J2EE Admin for AS2 Adapter we are not able to receive message from the third party mail box.
As per SEEBURGER EDIINT AS2 Adapter for SAP Exchange Infrastructure 3.0 document it is given as follows
"For debugging purposes, it is possible to dump the complete AS2 message or MDN to a directory on the SAP XI Server. The outbound and incoming AS2 messages are stored with complete HTTP headers. This also applies to the outbound and incoming MDNs."
So can anyone provide help to solve the issue.
Regards,
Prakash

Hi Prateek,
If message dumping is enabled then message is not reaching to the AS2 server and third party mail box receiving some error as not able to send message to the partner.
If meesage dumping is disabled then the message is reaching to the AS2 server successfully.
As we need to communicate with two mail box .So message exchange with one mail box is successfull and when second mail box pushes data to our As2 server it is not reaching and the partner is telling that negative MDN is received.
But when we check in the seeburger monitoring message from the second mail box is not shown, as i know that negative MDN is sent in cases like decryption is failed.
For debugging the above case message dumping is enabled and checked with the first mail box but it is also failing as I explained previously.
Seeburger Version is 1.7.1
So can you provide some solution to solve the issue with message dumping.
Regards,
Prakash

Standard Adapter Module "Message Transform Bean" in Seeburger AS2 Adapter

Hi,
    I am calling standard adapter module "Message Transform Bean" in seeburger AS2 Sender adapter where I am getting the following error :
ClassNotFoundException:com.sap.aii.messaging.adapter.Conversion . Can anybody help me on this. Appreciate for your respoinse.
Thank you,
Mallikarjuna Rao M

Hi,
Thank you for your replies I manage to get NWA dump for this issue.. Here is the log
Could not call backend system: Error in ???-module:Transform: failed to set up the transformer for channel 6857fd15f84d3e23a7b0f51ca1851b20; modkey TXT2XML; caused by java.lang.ClassNotFoundException: com.sap.aii.messaging.adapter.Conversion
Loader Info -
ClassLoader name: [sap.com/com.sap.aii.af.mod.trans.app]
Living status: alive
Direct parent loaders:
   [system:Frame]
   [service:servlet_jsp]
   [service:ejb]
   [library:engine.j2ee14.facade]
   [library:com.sap.base.technology.facade]
   [library:com.sap.aii.af.lib]
   [library:com.sap.aii.af.sdk.lib]
   [service:com.sap.aii.af.cpa.svc]
   [service:com.sap.aii.af.svc]
   [service:com.sap.aii.adapter.xi.svc]
   [library:com.sap.aii.adapter.lib]
Resources:
   D:\usr\sap\BWD\DVEBMGS00\j2ee\cluster\apps\sap.com\com.sap.aii.af.mod.trans.app\EJBContainer\applicationjars\com.sap.aii.af.mod.trans.ejb.jar
[LOC: com.seeburger.as2.impl.SHCInitiatorProcessor.initiateToBackend] Caused by: Error in ???-module:Transform: failed to set up the transformer for channel 6857fd15f84d3e23a7b0f51ca1851b20; modkey TXT2XML; caused by java.lang.ClassNotFoundException: com.sap.aii.messaging.adapter.Conversion
Loader Info -
ClassLoader name: [sap.com/com.sap.aii.af.mod.trans.app]
Living status: alive
Direct parent loaders:
   [system:Frame]
   [service:servlet_jsp]
   [service:ejb]
   [library:engine.j2ee14.facade]
   [library:com.sap.base.technology.facade]
   [library:com.sap.aii.af.lib]
   [library:com.sap.aii.af.sdk.lib]
   [service:com.sap.aii.af.cpa.svc]
   [service:com.sap.aii.af.svc]
   [service:com.sap.aii.adapter.xi.svc]
   [library:com.sap.aii.adapter.lib]
Resources:
   D:\usr\sap\BWD\DVEBMGS00\j2ee\cluster\apps\sap.com\com.sap.aii.af.mod.trans.app\EJBContainer\applicationjars\com.sap.aii.af.mod.trans.ejb.jar
at com.seeburger.xi.api.module.impl.nw71.SeeModuleProcessorLocal71.process(SeeModuleProcessorLocal71.java:55)
at com.seeburger.xi.connector.fw.InitiationThread.run(InitiationThread.java:101)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: java.lang.ClassNotFoundException: com.sap.aii.messaging.adapter.Conversion
Loader Info -
ClassLoader name: [sap.com/com.sap.aii.af.mod.trans.app]
Living status: alive
Direct parent loaders:
   [system:Frame]
   [service:servlet_jsp]
   [service:ejb]
   [library:engine.j2ee14.facade]
   [library:com.sap.base.technology.facade]
   [library:com.sap.aii.af.lib]
   [library:com.sap.aii.af.sdk.lib]
   [service:com.sap.aii.af.cpa.svc]
   [service:com.sap.aii.af.svc]
   [service:com.sap.aii.adapter.xi.svc]
   [library:com.sap.aii.adapter.lib]
Resources:
   D:\usr\sap\BWD\DVEBMGS00\j2ee\cluster\apps\sap.com\com.sap.aii.af.mod.trans.app\EJBContainer\applicationjars\com.sap.aii.af.mod.trans.ejb.jar
at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:259)
at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:228)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sap.aii.af.modules.trans.MessageTransformBean.loadClass(MessageTransformBean.java:121)
at com.sap.aii.af.modules.trans.MessageTransformBean.setup(MessageTransformBean.java:178)
at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:346)
at sun.reflect.GeneratedMethodAccessor484_10002.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy2674_10002.process(Unknown Source)
at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:249)
at sun.reflect.GeneratedMethodAccessor311_10002.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy102_10002.process(Unknown Source)
at com.seeburger.xi.api.module.impl.nw71.SeeModuleProcessorLocal71.process(SeeModuleProcessorLocal71.java:43)
Waiting for your valuable inputs on this.
Thank you,
Mallikarjuna Rao M

Seeburger AS2 Adapter sending message error

I have configured a FAck scenario as described by the Seeburger Manual and am testing a AS2 messaging scenario with a vendor (basically the inbound EDI message is passed to the Seeburger splitter to create a new message for the inbound order, and then the existing payload is mapped to a Funcational Acknowledgement and sent back to the vendor). I receive the message fine and the message split to create the order works fine, however when the FAck is passed to the AS2 receiver adapter (for transmission to the 3rd party) I get the following error:
LOCATION [null, null, 91fcf4f0-5223-11dd-9c8d-5cd90a641602] >> ERROR TYPE [, COMPONENT_ERROR, not retryable, not fatal]] >> DESCRIPTION [AS2 Adapter failure >> MID
MID <[email protected]22.2> already exists. - Duplicate will not be sent [LOC: com.seeburger.as2.component.AS2Client.storeMID]
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]22.2> already exists. - Duplicate will not be sent, SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]22.2> already exists. - Duplicate will not be sent
I'm not sure where the "duplicate" message comes from as this message definitely has not been sent before.
If I extract the same inbound message from the payload and pass it in using a file adapter (rather than the AS2 sender adapter) then the functional acknowledgement is created and transmitted to the vendor without any issues ...
Has anyone who has had some experience with the Seeburger AS2 adapter got any possible suggestions for resolving this issue?
Regards,
Jason

Hello ,
same issue occurred in my system
Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]> already exists. - Duplicate will not be sent, SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]> already exists. - Duplicate will not be sent
I'm not sure where the "duplicate" message comes from as this message definitely has not been sent before.
Has anyone who has had some experience with the Seeburger AS2 adapter got any possible suggestions for resolving this issue?
Please advise asap.

Seeburger AS2 Adapter: Receiving multiple messages

Hi guys,
I'm having some trouble using AS2 Adapter for receiving multiple messages. The problem is really similar to Peter's problem.
Seebuger AS2 adapter for XI as sender for multiple messages
I have it configured for one scenario and it's working fine. The problem is when I'm trying to receive other messages for the same Party but different services. Meaning, I've one Party(example BMW) and several services (BMW_DE, BMW_USA, etc). I'm able to receive messages from service BMW_DE but when configuring BMW_USA I'm getting HTTP 403 Forbidden.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
And the problem is that there are two sender agreements. Although the services are different, XI is not able to find the correct sender agreement to be used. After deleting the second second agreement, I'm able to send the respective message....
Can anyone give me a hint on how to solve this problem?

Hi,
this is done by different AS2 subjects. The sender agreement is selected based on this. So create separate AS2 receiver adapters for every message you need and put there different message subjects.
So if you'll have 3 AS2 receiver channels with subjects:
MessageType1_DE
MessageType1_US
the AS2 adapter will work like following:
first it tries to find an exact message subject, if it is found, message is "assigned" to this sender agreement. If no exact message matches the subject, then wildcards are used. (this mechanism is described in the Seeburger AS2 guide).
If you are getting 403 HTTP code, there may be also problem with authentication certificates.
Another problem may be, you don't have configured AS2 receiver channel for current subject.
Does this help you? Or you meant it another way?
Peter
p.s. check the answer above my post, Vardharajan's right
Edited by: Peter Jarunek on May 19, 2008 2:11 PM

Error while parsing AS2 message: DECRYPTION_ERROR in Seeburger Workbench

Dear all,
In our production SAP PI 7.1 server, we are getting the below error in the Seeburger Workbench screen.
Error:
State Error on receive, task will not be retried
"State Description Error while parsing AS2 message: DECRYPTION_ERROR # com.seeburger.ediint.edi.EDIMessageException: message decryption failed: failed to decrypt message: provider BC not found"
Imp points to note are:-
1. This error is not specific to one interface. 3-4 interface messages have this error.
2. And even for a particular interface that has this error, we could see that some messages are getting processed without any issues, and some error out, so we are not in a position to conclude anything.
Because of the above issue, many business critical messages are pending to be processed.
If any one has encountered this before error, pls share your inputs to resolve this or any workarounds to temporarily handle the issue will be appreciated.
Thanks,
Younus

Hello Younus,
We are facing exactly same problem in some of our scenarios.
It is strange that this error doesn't occur all the time ,only some messages fail with this error.
I know ,this is a worst approach,but as we couldn't find any solution,we have adopted a workaround to request partner to resend the message and this works well .
Thanks.
Regards,
Shweta

Resend AS2 messages from the Seeburger Workbench

Hello,
We have a EDI integration scenario where we are sending an asynchronous AS2 message via the Seeburger EDI adapter. As part of sending the message, we also request a synchronous MDN.
In cases where we have successfully sent the message but not received an MDN back (due to an error in the target system), is it possible to resend the original message from the Seeburger Workbench?
Thanks
Manish

Hi,
no it's not possible. The adapter will try to re-send the message a couple of times and then will mark the message as failed.
I think you can re-send it from RWB if you have the right authorizations.
Horia

Seeburger AS2: Error while parsing AS2 message: AUTHENTICATION_ERROR #

Hello all,
unfortunaltey we get follow error back, if we receive a message from our partner:
Error while parsing AS2 message: AUTHENTICATION_ERROR #
The channel setup is correctly ( I think)
(Sender Agreement:)
By the Aapter-Specific Attributes:
AS2 Sender Configuration
Authentication Certificate: <Certificate of the Partner>
AS2 Receiver Configuration
Decryption Key: Private Key from us
Signing Key: Private Key from us
The MDN Channel has setup follow:
AS2 Sender Configuration
Authentication Certificate: <Partner Certificate>
The AS2 Communication Channel has setup as follow:
AS2
disable Authentication required
Asynchrones MDN
Server Certificate <Partner's Certificate>
Private Key for Client Authentication is empty
But always we get the message back as I put in the topic.
Any ideas ?
Thanks for your help

Hi Stephen
From the configuration side everything looks fine.
I strongly believe that some configuration at your partner side must be wrong.
For testing purpose, if you have BIS Spoke please create a dummy configuration and send message to PI.
First test with Disabling certificate authentification and then with certificate
Regards,
Dhanish

Seeburger AS2 Adapter: "MDN not signed"

Dear all,
we just updated our test system from XI 3.0 to PI 7.1. Now we are facing a problem with our Seeburger AS2 Adapter.
I sent out a message via AS2 and get the follwing error message in Seeburger AS2 Monitor:
"MDN not signed"
In the Receiver Communication Channel I checked the Option "Sign MDN". In XI 3.0 this Scenario was working perfectly. So I contacted our communication partner and asked them if our AS2 message really contained a request for a signed MDN. Our commnucation partner confirmed and sent the MDN as text file to me. This text file shows that the MDN is signed. So it seems that the Seeburger AS2 adapter does not notice that the received MDN is a signed one. But why? Do you have an idea?
Just for testing purposes I unchecked the "Signe MDN" option. In this case the transmission finished successfully.
Who can help?
Thanks
Michael

Dear Vikrant,
many thanks for your reply. But I am not sure if we are really facing the same issue as you described it in your article.
Currently we have this situation:
When I send out a message the Seeburge Workbench provides only the following error message:
"MDN not signed"
Via the Recovery Monitor I can check the received MDN. Here I can see that the MDN is signed and positive.
In the Runtime Workbench I checked the following:
1. In the Message Monitor (Adapter engine) the message is in status "System Error". Here are the details:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received.
Adapter Framework caught exception: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received.
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received..
2. The Communication Channel Monitor shows the following error messages:
Error type: REPORT_ERROR >> Error date: 12/14/10 12:02 PM >> Description: MDN not signed [12/14/10 12:02 PM]
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: Negative synchron MDN received., SEEBURGER AS2: Negative synchron MDN received.
I do not understand why the MDN is recognized as negative and unsigned even if the plain text version of the MDN shows that it is signed and positive.
In your article you recommend to create a sender communication channel for MDN and a corresponding sender agreement. We already did that in XI 3.0 to forward the MDN as STATUS IDOC to SAP ECC.
Maybe you have an additional idea?
Thanks
Michaek

Seeburger AS2 resent of files in state "Error on send, will be retried"

Hi,
I have a few AS2 files in state "Error on send, will be retried" in the Seeburger AS2 monitor, which does not seem to be sent.
How can I trigger the files to be sent again or delete so we can resent the files from the backend.
Daniel Graversen
[Figaf|http://figaf.com]

Hi,
we have some messages in this status but none of them is displayed in the recovery monitor..
Any other idea?
Thank you,
Peter

As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

Hi,
There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
Kindly provide your inputs to help me resolve this.
Thanks,
Ruchi

Hi Ruchi,
500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
Regards,
Udo

There is no key entry with such alias in keystore seeburger AS2

Hi,
Error message in RWB shows the following
Message entered module processor exit bean and will be transferred to JCA adapter
2011-04-06 06:19:29 Success SEEBURGER/AS2: Received order from system.
2011-04-06 06:19:29 Error Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiExc
2011-04-06 06:19:29 Error Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.
2011-04-06 06:19:29 Error The message status set to NDLV.
2011-04-06 06:19:29 Error MP: Exception caught with cause javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ks
unable to send / receiver messages through AS2. Please let us know what could be the error. How/ where to resolve it.

Please check the SDN thread below
AS2 Adapter Configuration to Customer / no signature certificate
Also, check the help page below
http://help.sap.com/saphelp_sm40/helpdata/DE/84/be18d66b2a47f6b4adc704a7c0e23e/content.htm
for instructions on how to get the "SEEBURGER EDIINT AS2 Adapter for SAP Exchange Infrastructure Configuration Guide" from the Service Marketplace. Then, on this guide, please check the configuration according to your sender or receiver communication channel regarding the Security (certificates) parameters.
Are the key Store entries imported correctly? Please check if the certificates were imported in the right order and none of the certificates on the chain are expired.

Seeburger AS2 comm channel problem (B2B) - "perhaps AS2ID missing"

Hi guys!
We try to configure B2B scenario using Seeburger AS2, but communication channel monitor returns error:
Error type: COMPONENT_ERROR,NOT_TRANSMITTED >> Error date: 9/25/07 10:05 AM >> Description: AS2 Adapter failure Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:321) [9/25/07 10:05 AM]
We're not sure about the scenario configuration and using identifiers (cos' this is probably the problem).
Did someone of u already configured Seeburger AS2?
We have configured in receiver party alternative identifier Seeburger - AS2ID, however, the message sent to target has always agency XI and scheme XIParty. It should be probably Seeburger and AS2ID (the alternative one).
<SAP:Receiver>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">XXXX</SAP:Party>
<SAP:Service>BS_3RD_XXXXX</SAP:Service>
<SAP:Interface
How to achieve it?
Thanx a lot!
Peter

Hi Anoop!
Yes, we use it on receiver side.
ModuleProcessorExitbean exists, so it should be ok.
What I'm not sure about is the thing with identifiers..
In Party (let's call it X) - Identifiers, we have default agency http://sap.com/xi/XI, scheme XIParty and name X.
What values should be there for Seeburger?
We have Agency: Seeburger, Scheme: AS2ID; Name: X.
Is it correct?
We also received some 9 char long number - probably some ID to adapter(?). Any idea, if it is necessary and where to use it?
Is it necessary to configure identifier seeburger also in Identifiers tab of Receiver communication channel? Or we can leave it empty (both- sender, receiver)?
We use this in B2B scenario, of course: Target system is party, but we use our R/3 as Business System w/o party. Is it ok, or do we laso have to "be" as Party in our configuration scenario?
A lot of questions, but points will be awarded 4 sure
Thanx!
Peter

Seeburger AS2 messages Recovery

Similar Messages

Maybe you are looking for