Seeburger BIC - "createFiles"

Hello experts,
For debugging purposes I would like to use "createFiles" in an AS2 sender adapter.
I looked through all my Seeburger documentations but could not find anything.
Do you know how to use "createFiles" in the module tab?
Which Seeburger collection does there have to be deployed?
Thank you very much for your help!
Best regards,
Peter

>
Peter Wallner wrote:
> Thank you Rajesh for your answer.
>
> So do I use it like this?
>
> localejbs/Seeburger/CreateFiles -- Local Enterprise Bean
>
> If I just want the source and target files do I need to set parameters too?
> Thank you again!
> Peter
Need to configure the BIC module
localejbs/CallBicXIRaBean bic in processing sequence tab
and use the below at ModuleConfigurationTab
paramter name parameterValue
createFiles path of PI server where to store files
HTH
Rajesh

Similar Messages

Seeburger BIC Mapping deployment issue in PI 7.1

Hi experts
We have upgraded from XI 3.0 to PI 7.1 and seeburger is also upgraded to a compatible version.(2.x).
Mappings_user.sda was used in 3.0 environment.
But we are not able to deploy the same in 7.1. I think sda format is not supported in 7.1.
Is there any way to convert .sda to .sca and deploy?
Or how can we generate a compatible deployment file for 7.1?
I have tried using BIC mapping designer,but it shows the option for .sda and .jar only.
Thanks in advanceDhanish Joseph

Hi
I have installed BICMD 632 version and imported .BICMD project file.
Then assigned sda/sca number to it and created deploy file.(Mapping_user00.sda).
Then installed this in PI system using JSPM.
I have tested allmost all the mappings successfully except one in PI system.(EDI 990 message).
When i send data to PI data comes to channel and it shows conversion error. But detailed information not available.
In seeburger monitoring the message goes to recovery mode.
I have used the input 990 X12 and tested in Seeburger BIC MD. And there it is success!!!!!! So i am confused what is happening when it comes to PI system.
I faced some issues>>>
1. while importing project file into BIC MD it asked for apply some autocorrection for one map.(different than this). I have clicked on cancel
2. When i assigned SDA number to my project i have selected 2.1.0 SDA version( 1.8.0 option was also there).
Your prompt reply is greatly appreciated .
Thanks

Error in Seeburger BIC Mapping

Hi all,
I am working on Seeburger BIC Mapping Designer.
As i am starting off with it, i have planned to do a very simple scenario File to file.
Source would be an XML and target also would be an xml.
Compilation is fine, but while converting I am gettuing an error
"[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[4(read Segment : KA\)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort
<<ErrorStreamEnd>>
Conversion error "
Please let me know what should be done.
Even I have enabled SetIngnoreCRLF option in the source options.
Cheers,
Karthick

Hi Karthick,
Where do you get this error?
In BICMD ?
Have you created the E2X and/or X2E mapping programs in BICMD tool?
Test it locally in the tool intself before deploying the mappings to XI server.
Follow these steps to create a 1;1 mapping for XML to EDI and EDI to XML conversion program:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948;jsessionid=(J2EE3414900)ID2060961950DB01298938248398894809End
Regards,
Ravi

Seeburger EDI adapter Vs Seeburger BIC adapter

hi,
what is the difference between Seeburger EDI adapter Vs Seeburger BIC adapter.any docs please.
thank you,
babu

Hi,
Seeburger EDI adapter Vs Seeburger BIC adapter.
If your edi file converts with BIC mappers then you would have to use BIC adapter or BIC modules, i hope BIC modules, next EDI Adapters see the below links to get more details..
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards
Chilla

Seeburger BIC let errors pass

Hi,
We have a scenario where we read from a FTP site. We are using seeburger BIC to convert the messages to something readable.
Unfortantly there are also som junk messages in the file folder or they contain a UNA that Seeburger does not understand. This mean that the seeburger module throws an error. It seems like the FTP adapter cannot move the file to the error folder, so the next file can be processed.
Any ideas on how this can be changed so we can process the files even when some of the messages are failing..
Daniel
[figaf|http://figaf.com]

Hello Daniel,
It seems like the FTP adapter cannot move the file to the error folder, so the next file can be processed.
Any ideas on how this can be changed so we can process the files even when some of the messages are failing..
It could probably be also related to the issue of the file adapter archiving e.g processing mode is set to archive and when there are errors, the rest of the messages cannot be processed or at least some a stucked. What we have done is to set the mode to delete and disable archiving for the moment. Maybe if you also disable the archiving for faulty files, it could also work on your end.
Hope this helps,
Mark

Seeburger BIC module not working

I am using Seeburger BIC module in my sender file adapter. But when I pick up an EDI file using this file adapter, the BIC module is not called. The file adapter simply passes the EDI file to Integration Engine without passing it through the BIC module. Hence, message mapping fails at Integrating Engine as the Message is not in XML form. Also I am not getting any error in adapter monitoring/Message monitoring saying that the adapter module does not exist.
The BIC module is deployed on XI server. I have activated my communication channel. I have put the module names correctly and in proper sequence and also there are no typo errors in entering the parameter names.
Please help.
Regards,
Shweta

R u passing the correct mapping name under the parameter value in module configuration?
Regards,
Anoop

SAP GTS------- SAPPI with Seeburger BIC----- ATLAS using with SAP PI

Hi All,
I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
Regards,
Ramesh

>
Ramesh Gulipalli wrote:
> Hi All,
>
> I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
>
> 1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
> 2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
>
> How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
>
> Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
>
> For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
>
> Regards,
> Ramesh
> .
for converting an XML to EDI or vice versa you can use the seeburger adapter.
http://www.seeburger.com/xi-pi-adapters/

Problem with Seeburger BIC

Hi Guru.
I've a question for you!!
I'm using the Seeburger BIC Mapping Designer but I'va a big problem: I' can't create the deploy file.
I'm try to follow all the documentation that i find in internet but doesn't work...
After the generation of the XML 2 EDI mapping I want to create the deploy file.
After the selection of this function the system shows the following message:
"You can't create a deploy file for this project! There is no SDA/SCA numbers for this project!"
Have you some solution or workaround?
Thanks
Regards Manuel Chiarelli

Hello Manuel
I assume the Seeburger MD is installed on a client system? If yes, you need to start the Mapping Designer in ProjectAdmin mode.
Below is an excerpt from the SAP_BICMD_config_en.pdf. See the section "Start Mapping Designer as ProjectAdmin"
Start Mapping Designer as ProjectAdmin
In order to assign projects to SCAs, you need to modify the bic_mapping_designer.ini. This file is located under <BIC MD Installation path>/Bin/bic_mapping_designer_ini. Open the file with your
favorite text editor and add to following line below the last CmdLineArg <number> line
CmdLnArgX=-ProjectAdmin
Please note the CmdLnArgX prefix must have an ascending numbering where X is representing the number. Save the file and exit. After that restart the MappingDesigner.
Regards
Mark

How to import the IDOC into Seeburger BIC mapping designer

Hi All,
Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
to Atlas systeam.
Regards,
Ramesh.

Hi Ramesh
BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
Regards
Ramesh

IDoc to File[EDI] using seeburger BIC Mapping Tool

Hi Gurus,
I'm having a scenario of IDoc to EDI FIle, I'll be using IDoc DESADV.DELVRY03.ZDELVR0X; Kindly advise steps needed in BIC Mapping Tool. I've already referred to this post /people/dijesh.tanna/blog/2008/05/25/sap-pixi-content-conversion-using-generator-mapping-functionality-of-seeburger-part-1 but still can't get it right.
Thanks.

Thanks a lot experts :D....
I'll be using a file adapter for my scenario..
Any Idea on what Seeburger BIC mapping module should I use?
am I just use the ff module?
Module u2013 Processing Sequence
Number     1     Name     localejbs/CallBicXIRaBean     Type     Local Enterprise Bean     Module Key     bic
Number     2     Name     localejbs/CallSapAdapter     Type     Local Enterprise Bean     Module Key     exit
Module u2013 Module Configuration
Module Key     bic     Parameter name     destSourceMsg     Parameter value     MainDocument
Module Key     bic     Parameter name     destTargetMsg     Parameter value     MainDocument
Please advise.
Thanks.
Edited by: Devilbatz on Dec 8, 2010 8:31 AM

Mappings_user.sca - Seeburger BIC Mapping Designer

Hello experts,
I have read SAP note 1353318 about how to start the BIC adapter on PI 7.1.
Question: where do I get the file "mappings_user.sca" from? It says it is on the BIC Mapping Designer-CD, but the installation files I received via the Internet - I do not have the CD.
Can I somehow create that file with the BIC Mapping Designer that I have already installed?
Thank you for any hint you can give me!
Best regards,
Peter

Hey peter,
go to your seeburger installation directorys bin folder and check for bicdesigner.ini file and add the below cmd
CmdLnArgX=-ProjectAdmin where X will be 4 (i.e. count of cmd line agrs used ) .
Then start the bic mapping designer tool and go to tools option there you can see a new option called Assign Projects to SDA, after that you can create a deploy file..This is new option provided by seeburger bic so that only project Admin can have rights of creating the deploy file.
If you still face any problems post the same..
HTH
Rajesh

Can SeeBurger BIC Mapping tool automatically remove Delimiters?

Hi all,
When we map IDOC's to EDI X12 messages using the SeeBurger BIC Mapping tool, we sometimes have delimiters occur in fields such as name or address. We are using the setDestinationDelimiter and have changed our delimiters so this occurance is rare. However the problem may still occur. This causes an invalid message to be passed to our partner.
One option is to use XI mapping and the replace function on each field however this is cumbersome and not the ideal solution.
Is there a way to automatically remove Delimiter characters from fields as part of the BIC Mapping.
Cheers,
John

Hi Satish,
Thanks for re-iterating the problem. You are absolutely right that this does cause an invalid message.
Also thanks for your suggestion regarding asking business not to enter the data, this has been done and as stated the occurences of these delimiters in the fields will be low, usually due to user error.
We still however want to cater for these occurrences and prevent an invalid message being sent to the partner.
I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works. Anyone out there who can help?
Cheers,
John

Need Seeburger BIC Mapping names for standard Msg types - EANCOM2002

Hi All,
I need Seeburger Bic Mapping names for standard Msg types.
Orders
ORDRSP
DESADV
Note that they are in EANCOM2002 format.
Kindly provide them asap.
Can anyone pls send the document to [email protected] if you have the Seeburger mapping names for EANCOM2002 and ANSIX12.
Thank You.
Regards
Seema.

Hi Marcos,
>> IF they have been deployed in your system the names will be:
>> See_E2X_ORDERS_UN_D96A
>> See_X2E_ORDERS_UN_D96A
>> See_E2X_DESADV_UN_D96A
>> See_X2E_DESADV_UN_D96A
R u sure of we can use these mappings for EANCOM2002 format.??
R u sure EANCOM2002 is equavalent to UN D96A???
-Seema.

SEEBURGER BIC

Hi All,
I have a question regarding Seeburger BIC, I have read thru one of the Blogs (/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact) which tells that Native EDIFACT is converted into XML EDIFACT and the actual mapping is done in SAP XI. When Seeburger BIC has the capability of coversion from ANY to ANY format why it is preffered to do the mapping in SAP XI.
Can anybody explain what are the pros and cons of using Seeburger BIC for any to any conversion.
Regards,
Bharani

I feel SAP XI is a middleware tool and doesn't have the capabilities for the EDI Mapping
Without Seeburger there is a possibility for developing of adapter or adapter module for this conversion. Seeburger however provides many other functionalities like monitoring and supporting various protocols.
mapping in SEEBURGER would be lot more easier in SEEBURGER when compared to SAP XI.
This is possible. It is not mandatory to use Seeburger with XI. However when you post question in XI forum you will get replies related to Seeburger linked with XI only
There is a conversion engine present if you purchase Seeburger alone and have no XI associated with it. The problem here is seeburger can change the structure of message but does not have vast support of adapters as XI does. Therefore Seeburger with XI provides the best solution. This would be of your interest
http://www.seeburger.com/any-to-any/
Regards,
Prateek

Seeburger BIC problem

Hello experts,
I'm facing a nasty Seeburger BIC problem in my receiver adapter when converting from XML to EDI.
The error is:
- SEEBURGER BICXIADAPTER.MODULE Message could not be forwarded from the Module (CallBicXIRa) to the JCA adapter.
Adapter Framework caught exception: BICMODULE:Adapter call failed. Reason:
- Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error in BICMODULE-module:Adapter call failed. Reason: .
As you can see, the reason is not mentioned.
When I look into the message monitoring, I see the message does not have a payload. On the SOAP ducument is provided with this content:
authorization:Basic UElJU1VTRVI6SUQzaW5zdGFsbA== accept-encoding:gzip
sap-xi-messageid:4BA11A89186666D8E1000000C0A8A310 content-
length:2916349 host:id3-ma-dwh1.mrco.be:51300 user-agent:SAP NetWeaver Application Server (1.0;711) content-
type:multipart/related;boundary=SAP_001E0BFD21001DEF8CBF15AFFC885B07_END;type="text/xml";start="" soapaction:"http://sap.com/xi/XI/Message/30"ApplicationMessageasynchronous4ba11a89-1866-66d8-e100-0000c0a8a3102010-
03-17T19:07:56ZID2CLNT001SteriaVANBC_UTILMDToSteriaVANMDSnapShot_In_AExactlyOnceInformationOffID2CLNT001XI4ba11a89-1866-66d8-e100-0000c0a8a3103.0is.13.id3-ma-dwh1XI4ba11a89-1866-66d8-e100-0000c0a8a3103.0af.id3.id3-ma-dwh1XIRA4ba11a89-1866-66d8-e100-0000c0a8a310MainDocumentApplication
The Seeburger modules used in my receiver adapter:
1. localejbs/CallBicXIRaBean -- BIC
2. localejbs/Seeburger/Zip -- ZIP
The Module Configuration:
BIC - destEncoding - ISO8859_1
BIC - destSourceMsg - MainDocument
BIC - destTargetMsg - MainDocument
BIC - mappingName - X2E_....
BIC - srcEncoding - ISO8859_1
ZIP - mode - zip
ZIP - sourceDest - MainDocument
ZIP - targetDest - MainDocument
ZIP - zipFormat - gzip
Messages fail at random. ABAP mapping and data are ok.
I think there is a problem with capacity or memory or something.
Anyone any idea?
Thanks a lot!
Dimitri

>
Dimitri Sannen wrote:
> Hello experts,
>
> I'm facing a nasty Seeburger BIC problem in my receiver adapter when converting from XML to EDI.
>
> The error is:
>
> - SEEBURGER BICXIADAPTER.MODULE Message could not be forwarded from the Module (CallBicXIRa) to the JCA adapter.
>
> The Seeburger modules used in my receiver adapter:
>
> 1. localejbs/CallBicXIRaBean -- BIC
> 2. localejbs/Seeburger/Zip -- ZIP
>
Dimitri,
The reason that you are getting this error is because you are missing the exit module bean. add this module after the zip module
Processing sequence
3. localejbs/ModuleProcessorExitBean Local Enterprise Bean Exit
Module configuration
exit JNDIName deployedAdapters/SeeXIAS2/Shareable/SeeXIAS2
There is an exit entry missing which actually is used to pass the bic data to PI box.
Regards,
Pavan

Seeburger BIC - "createFiles"

Similar Messages

Maybe you are looking for