Seeburger doubts

Hi Guys,
I have a few questions about seeburger adapter...
what are the adapter parametrs that need to be filled in SEEBURGER adapter in communication chammel step?
Also what are the securities issues that need to be taken care off?
what are 856,855 etc.
also do we have different seeburger adapter for each ANSXI and EDIFACT?
also does the receiver company will provide us their edi structure?
Thanks,
Ashish

Hi Ashish,
First you need to instal Seeburger BIC and then you should generate the XSD structure of the all your documents.In Sebbburger BIC mapping designer is generate thes type of all the mappings1)E2X----EDI to XML and X2E ---XML to EDI etc.Seeburger BIC mapping desigener can take care all the tranformatiom of EDI to XML and XML to EDI.
Seeburger adapter is the B2B EDI Adapter.Seeburger adapter is also many types adapters:
1)BIC Adapter
2)Split997 adapter
3)AS2 adapter.Based on your usage you have to configure thes adapter.for example
AS2 sender adapte configuration:
1)AS2
2)Asynchor MDN Setting:
a)SSL Certificates and Clint certifactes.
b)SSL host name:HTTP Timeout,MDN Retry interval and MDN Retry count
c)use proxy
AS2 Receiver adapter:
a)HTTP:server ,port ,url and http time out
b)proxy:
c)AS2:Compress,Sign.Encrypt,Sign MDN use proxy and Xi Message
Also what are the securities issues that need to be taken care off?:
Load the certifictes into IS and Configrare the Encryption, Decryption keay ,Sign alograthem.These to to be configure the Sender agrrement and receiver agreement of you interface.
Seeburger Adapter have more funcations:it is very good to Moniter Message.
1)Archiving
2)Message monitor
3)message Spliter
4)Mapping Variable
5)Resource manger
Regards,
Ramesh

Similar Messages

Seeburger AS2/EDI sender configuration details

Hello All,
I am working in EDI interface for ANSI X12 using Seeburger AS2/EDI , As I am new to B2B interface I have one doubt regarding Transaction set identifier code,interchange sender and receiver ID , In case of B2B add on it is clearly configured on EDISeparator Sender Adapter under filter
but in case of Seeburger AS2/EDI I am not understanding where we can add this details ,
Thanking you
Sridhar

Hello Sridhar,
for incoming data, the Seeburger BIC-Adapter uses a mapping in the Module-Chain which automatically detects the following parameters
- MessageType and Version (e.g. ANSIX12_850_V4010) from ST segment
- Interchange Sender ID (from ISA segment)
And the MessageSplitter then allows to forward each combination to a specific SenderAgreement for processing the data in PI.
This example shows an entry in the "MessageSplitter" that assigns an 850 V4010 message from a partner with the Sender ID 11111111111 to a specific SenderAgreement to process the data...
Kind Regards
Stefan

997 adapter type not present in Seeburger for PI 7.1

Hello Experts,
We recently installed Seeburger on our PI 7.1 system. We deployed all the relevant modules successfully and also imported the meta-data to ESR after whcih we were able to see the FTP adapter from Seeburger. But we were not able to see 997 adapter.
As mentioned in one of the blog, it is necessary to post funcitonal acknowledgements and configuration of 997 adapter is required for the same.
We checked the installation guide from Seeburger but nothing has been mentioned in the same. any idea how to get the same in ID?
Also one more doubt. Suppose I am getting 850 orders from 2 customers do i need to configure Identifiers in the Sender Seeburger adapter representing different customers?
Thanks in advance.
Regards
Rajeev

Rajiv,
Identifiers are required only when the receiver channel is IDOC.
To summarise, you create one party per customer and the same would be done in partner profile as customer rather than logical system,.
Then you specifiy the identifiers in parties and the same is represented in idoc communication channel . By this the idoc comms channel will know which customer in ERP it needs to post the idoc.
This will be used only when the receiver is idoc. Moreover in seeburger, you need to maintain an entry in the message splitter which will enable to use split 997 adapter.
If you create party in XI, make sure to represent that party in ERP as either vendor or customer rather than logical system. This will give you more clarity.
Regards
Krish

IDOC to EDI file scenario and EDI file to IDOC scenario without Seeburger

Hi All,
IDOC (Invoice) to EDI file scenario without Seeburger
Pls let me know if anybody have blogs for the same
EDI file to IDOC (Orders) scenario without Seeburger
Pls let me know if anybody have blogs for the same
Regards

Hi Rachit,
>>Can anybody send me blogs to convert IDoc structure to EDI or EDI to IDoc structure using Conversion Agent or using JAVA Mappings.
Using conversion Agent there is no coding, If you have a conversion agent insatlled in your landscape you will have better understanding..
Also java code for IDoc to EDI have some problems:
1. The EDI format differs based on requirement so there will always be a customized code for it.. Like we have IDco to EDIFACT and ANSX12...
2. Because most of these codes are propriety materials I doubt whether anyone be sharing the complete code here in SDN. Better to have a java consultant at your end and put him with your requirement.. From the reply in above threads you should be clear that what you are looking for can be done from java coding..
All the best
Regards
Suraj

Seeburger BIC tool

Going to support EDI interface which uses Seeburger AS2 adapter either at sender or receiver side.I have few doubts on BIC module:
1.Do i need to install BIC tool on my laptop or it is a web based tool which i can access from seeburger workbench?
2.For all the edi conversion using Seeburger do we need BIC module to convert messages from EDI to XML or from XML to EDI?
3.why we need to do message mapping again if we had already done BIC mapping?
thanks in advance.

Hi,
1.Do i need to install BIC tool on my laptop or it is a web based tool which i can access from seeburger workbench?
Yes you need to install BIC mapping tool in your laptop to do the mappings.
2.For all the edi conversion using Seeburger do we need BIC module to convert messages from EDI to XML or from XML to EDI?
Yes for all EDI conversion using Seeburger you need BIC tool. But if you have some standard mapping already given by Seeburger than you dont need BIC tool, you can directly use those mappings. Remember standard mapping will start with name SEE*
3.why we need to do message mapping again if we had already done BIC mapping?
BIC mapping tool is used to convert EDI to XML and vice versa. Think about a scenario when you need to convert an IDOC to EDIFACT format.
Than first you have to do 1:1 mapping in PI where you will convert IDOC to EDIXML and than use BIC mapping tool to convert EDIXML to EDIFACT file.
I hope above answers will help you.
Regards,
Shradha

SeeBurger BIC mapping designer

Hi,
I have generated two files mappings_sys.sca and mappings_sys.sda using seeburger BICMD version 1.8
In earlier versions the file generated was mappings_user.sda.
So i have doubt that the two files generated in new version are deployable or i have to do something more to get the exact deployable files.
Thanks,
Akkasali.

Hi
You can deploy either by SDM or JSPM.
Check the link: http://help.sap.com/saphelp_nwpi71/helpdata/en/87/4797422930c56ae10000000a155106/frameset.htm
STep by step procedure in Note:1138877
Regards,
Naveen

Seeburger: No matching inbound binding

Hi guys,
I'm having the following error :
I'm using Seeburger AS2 adapter and I'm trying to receive a message from an external partner. I've created the corresponding channels, sender and receiver agreements but I'm getting the following error:
No matching inbound binding (message) found for
FromParty:XITest ToParty:B2BTEST subject:1209234884433
I've set on the sender cchannel the 'AS2 message subject' as 'AS2 message test' and I think the problem is related to this configuration.
So I changed the value of the field to '*' so that I'm able to catch any subjects, like the one above....
But with this configuration '*', after activating the channel I'me getting a similar error on the 'communication channel monitoring' but with new subjects and with no party entities every 2 seconds...
No matching inbound binding (report) found for FromParty: ToParty: subject:
I've checked the threads
Seeburger - async receiving MDN problem- no binding found for AS2 from Peter and
Seeburger AS2 Adapter No binding found for: AS2, http://seeburger.com/xi from Murali but nothing....
Do you have any ideas?

Hi Prateek,
I'd already tried cleaning caches but no good...
Hi Peter,
I've found out what the problem was. What is the purpose of the flag 'Hostname check'? I'd the flag checked by default, I've unchecked it and now I'm able to receive the messages.
Answering your questions, yes, both are using parties and for the MDN i only have the sender agreement and not the receiver.
I'm sure I'll keep posting doubts in the next few days.
Thanks for your attention and patience

Seeburger Message Catalogue - Need more messages

Hi experts,
very quick and simple question. The standard catalogue given with Seeburger MD/BIC doesn't have some of the messages I need e.g. INVOIC (D01B) and a few others.
What is the best and quickest way to achieve this?
I doubt if there are any financial charges for this?
regards

Hi Daniel,
Thank you for the reply. I am hoping there shouldn't be any charge for it
As the structures are quite easily available on the net e.g. the controlling body site however would require minor changes as per seeburger.
What I am finding hard is there is no documentation I can find on mapping designer except the one pdf which came with it but that doesn't give me much except how to a mapping.
I need to more validations in even for other scenario's e.g. check the CNT segment but don't know to edit these things in mapping designer. Any resource you have?
regards

SeeBurger Adapter PostInstallation

Hi guys,
I'm back with another cool doubt...
We're using SeeBurger AS2 Adapter and we've followed every installation step described in the corresponding manuals.
I'd like to try a short example, sending a test message to a partner just to check if the installation is working properly. However, I've bumped at the point when I was creating the sender communication channel. When trying to select the AS2 Adapter, there's no signal of it. I can only get all the SAP BASIS Adapters (RFC, Idoc, etc...) list displayed, no signal of AS2.
So I thought, let me check if the corresponding SWCV is correctly installed.
After digging up on SLD I've found the corresponding:
     Installed Software Component AS2Adapter and
     Installed Support Package: AS2Adapter
However, there was something that caught my eye. They both have version '0'. That seemed a bit odd, since evey component has the corresponding version after the installation. Can any of you guys who worked with the Seeburger Adapter check if this setting is alright? Can you guys check your SLD SWCV?
If you think there's something missing and the SLD setting has nothing to do with it, please give me an idea....
Thanks a lot in advance.
Another Question:
The imported .tpz in the IntegrationRepository 'SEEBURGER_EDI_ADAPTER' responsible for the corresponding AS2 Adapter which I'm trying to use in the IntegrationDirectory corresponds to a Software Component Version with a key from the SLD where we can check the associated GUID.
Well, I was expecting to see this SWCV in the SLD, but nothing...I've searched all the generated GUIDS in the SLD from ContentMaintenance and there's not there...
Am I missing any activation?
Edited by: Gonçalo Mouro Vaz on Apr 17, 2008 12:44 PM

Hi........
          As far as the version is concerned it has nothing to do with the functioning of that particular SWC in SLD.....its not a mandatory requirement........u can simply import the SWCV in the
Integration Repository->Tools->Transfer from System Landscape Director->Import Software Component Versions... and carry on with your work...
No activation as such is needed.....
compliment with points if helpful.........
Thank you.

Seeburger Classifier

Hi,
I am using Seeburger Classifier module.
I have a doubt over there.While doing module configuration,how we are going to decide about the value of parameter classifierAttID .
From where i will get the parameter value for parameter name classifierAttID
Thnanks,
Anoop

HI,
Though I dont have much experience with classifier module but what i know is:
classifierAttID:
This parameter is used to specify an attachment, in which the information about the classification is
attached to the XIMessage.If no attID is set, the defaultname MessageTypeReport will be used.
Paramter name should be classifierAttID and parameter value wil be classifierAtt. that what should be mentioned in AS2.
Thnx
Chirag

Seeburger Related Information

Hello SDNers,
For your Seeburger related configurations, refer to the following series I posted recently. The one below has links to all others
/people/prateek.srivastava3/blog/2009/08/05/seeburger--part-2--seeburger-workbench
If you are using various version of Seeburger with lot more convenient option, please add your comment to respective blogs and I would update it. For your configuration queries, please post your doubts here on SDN so that you may get input from experts around the world.
Best Regards,
Prateek

Hey good overviews provided
If you also like to have a sample scenario of Split 997 and ack things of EDI
just hava a look at my blog
/people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
of course I can not compet with you )
Rajesh

Customs declaration process doubts

Hi experts...........
I have small doubts on GTS customs declaration process...
Suppose if my client is an US based company and my client is having business process in EU Zone,
My doubt is if i process customs declaration, that time i need to maintain converter system like NCTS to US customs and also I need to maintain converter system for EU? if the answer is need to maintain at both levels, then again is it possible to maintain NCTS for both customs departments?
Please share your knowledge it will help to me to get more discussion on

Hi Gopala,
Assuming that you make use of the licence for the Seeburger convertor that comes free with GTS, the message mappings are all provided with the package.
Use of NCTS in the EU depends on where and how the Import Declarations are processed.
Has your client already decided to go ahead with the GTS implementation? If not, maybe he can find a more confident consultant to persuade him?
Regards,
Dave

Doubt in fbl1n transaction

hi i have a doubt....
in fbl1n transaction, there are open items and cleared items.
in it the cleared items for certain document types such as invoice etc is not present in the open item table (bsik)
however the cleared items for document types such as general voucher its present in the open items table (bsik)
is this possible as all cleared item entries shld b present in the open item table with an indicator set for cleared or not...
plz exlain!

Hi
There are 2 tables(open and Closed Items) in FI for Account Payables and Account Receivables and GL accounts
1.Account payables: BSIK is Open Items and BSAK is Closed items
2.Account Receivables; BSID and BSAD for OPEN and closed items
3/GL accounts : BSIS and BSAS for Open and Closed Items
Reward points for useful Answers
Regards
Anji

Doubt in creation of a new object

Hi All,
I have one doubt in creation of a new object.If a new object is to be created and it is not a subtype
of any existing object, then what should we enter in the Program field for creating the object?
I hope I am clear with my question.
Thanks in Advance,
Saket.

Hi Saket,
Following will be required for created a custom business object.
1. Object Type - ZTEST (Internal Techincal Key)
2. Object Name - ZTESTNAME (Technical Key Name)
3. Name - TEST (Name of BO, it is used while selecting the object type)
4. Description - (Short Description of BO)
5. Program - ZTESTPROGRAM (ABAP program in which the methods of the object type are implemented)
6. Application - A or B.. etc (Area to which your BO is related)
Please remember that you can learn these basic things by giving F1 help on those fields and in HELP.SAP.COM.
Regards,
Gautham Paspala

Doubt in sender mail adapter

Hi Everyone,
Can we read and validate the attachment of the mail.If so how to do it.
Thanks in advance,
Sakthi

Hi Sakthi,
Please refere the below links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/52b240ac052817e10000000a1550b0/frameset.htm
Let me know if you have any doubts regarding this.
Thanks,
sekhar.

Seeburger doubts

Similar Messages

Maybe you are looking for