Seeburger EDI Adapter Vs AEDAPTIVe EDI Adapter

Hello all,
A client, who already works with SEEBURGER wants to test the AEDAPTIVe EDI Adapter.
I would like to know if someone has already worked with this 2 EDI Adapter and if there is a big difference between then.
I have already worked on Seeburger EDI Adapter but not Aedaptive...
I know it's a very specific question, hope i find someone who did it..
Regards,
JP

Hi,
Did you already test AEDAPTIVe's EDI?
Gordon

Similar Messages

SEEburger error in conversion from EDI to EDI-XML

Dear SAP experts,
Good day!
Can i seek your inputs regarding this error i'm getting when i've tried to convert the EDI (D93A_RECADV message) into EDI-XML?
I am using BIC for this one.
This is the error i am getting,
[Error:ID=2099;LEVEL=1] InhouseDocReader doSyntaxCheck(): offset[78167]: the found segment is not in the message description.
Conversion error
Does this mean the source file is in wrong structure?
Kindly advise.
Thank you very much!
Fred

Hi,
Make sure that You used the Source structure in the IR from the External Def of the Seeburger SWCV only.
And deployed the necessary mappings on XI server by making the .sda file in BIC.
And the Incoming file should have the valid values while parsing the EDI file inorder to convert the EDI ti EDI_XML
Check this also
/people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
Regards
Seshagiri

Aedaptive SFTP adapter - alerting problem

Hello experts,
Has anyone experience with the Aedaptive SFTP adapter?
We use it at the client side, but unfortunately alerting is not supported. I expected this of a certified SAP PI adapter, but it isn't the case.
Is there an alternative?
Thanks a lot!
Dimitri

Hi Iñaki,
We configured our channel as it show the note 1988592 - SFTP Adapter not picking files with *
But we have the same error:
Exception received while check for additional files: String index out of range: -1
I attached the screenshot
Thanks and best regards

What is the difference between a VGA adapter and an AV adapter? Which would be better for my iPad 2 if I just wanted it for games and browsing the Internet?

If I just wanted to play games and surf the web, would a VGA adapter or an AV adapter be better? For my iPad 2? I asked my family for a VGA adapter for Christmas and I'm not too sure if it's the one I want. Also, what is the difference?

HDMI Adapter

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

PI 7.0: Message prioritisation in adapter engine for SOAP adapter.

Hi All,
We have both high and low priority synchronous messages using the SOAP sender Channel of the Central AE.
How can we make sure that High Prio messages ALWAYS get a thread right away when entering the AE? Installing a separate AE is not an option.
When I look in RWB->Component Monitoring->Adapter Engine->Engine Status in the Queues tab, I see this:
SOAP_http://sap.com/xi/XI/SystemCall Yes 5(5) 5
SOAP_http://sap.com/xi/XI/SystemRqst Yes 5(5) 5
When a new High Prio message enters, it can take more than one hour before it gets processed, because there are 1000 Low Prio messages also using the same 5 available Threads...
This delay is of course unacceptable for High Prio messages.
I checked in many other threads in SDN, looks like we cannot priortise for particular messages in PI 7.0, as we can do only at adapter level, not at interface level.
I was thinking of going to the approach which was suggested by "Gr, Wout" in the below thread.
xi prioritization in adapter engine (ae, af, adapter framework, java, jca)
Creating own adapter "MYSOAP" by copying the metadata of SOAP adapter. By that we can use our own adapter "MYSOAP" for high priority interfaces.
what you think guys about this approach?
Is there any thing I need to take care going through this approach apart from copying SOAP metadata into my own adapter.?
Thanks
Deepthi

increased thread count for soap adapter

Adapter specific attributes - SOAP Adapter

Hi,
I am trying to use the adapter specific attributes of the receiver SOAP adapter. But I am not able to view the Dynamic configurations in sxi_monitor corresponding to this message. Any clue why!?
I read through the SOAP adapter help on help.sap.com,
<i>http://help.sap.com/saphelp_nw2004s/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm</i>
Here it says:
<i>If you want to use header fields, set the relevant indicator for Variable Header. The technical names for the fields are XHeaderName1, XHeaderName2, XHeaderName3. The parameters are embedded in the HTTP request under the names you enter here.</i>
But I donot find an option where I can enter the names. Am I missing something here?
Regards,
Smitha.

Hi Smitha,
I did not try to use adapter-specific attributes with SOAP-adapter, but with mail-adapter. The documentation is quite similar, so I excpect similar results...
So as far as I understood, the parameters XHeaderName1, ... etc are for dynamic extension of the set of adapter-specific attributes. For example, if you want to add some more information in the message header, you can program an adapter module and you have now a guide how to name the additional attributes.
Usually, the "standard" adapter-specific attributes are starting with "S" (Sender) or "T" (Receiver). You can find the names in the documentation of the SOAP-adapter.
In order to use the adapter-specific attributes, you have to check both indicators (adapter-specific attributes, variable transport binding). If this still doesn't work, you should use OSS. In my scenario (mail adapter) this didn't work, too. The reason was, that there was a bug in the adapter metadata (Integration Repository) of SAP BASIS. There was a SAP note, where I could download the correct adapter metadata. Maybe you can find a SAP note for the SOAP Adapter.
Although this is probably not the final solution, I hope this guides you a step further.
Regards,
Torsten

JMS Adapter not appearing in Adapter Monitor, How to Fix ?

JMS Adapter not appearing in Adapter Monitor screen when choosing "Only Installed and Started Adapters" option. What need to do to install and start the JMS adapter.
Thanks in advance

Hi,
Only JMS adapter is not seen in the adapter monitor or other adapters are not listed in the same.
Have you checked whether the JMS drivers are installed on XI or not?
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Thnx
Chirag

Why do we require Receiver IDoc Adapter wen Sender IDoc Adapter is not req?

Hi All,
We require Receiver IDoc Adapter( if the receiving System is R/3 and uses IDoc) but when sending BS uses IDoc, Sender IDoc Adapter is not required since it resides in ABAP Stack. So, can anyone explain me as why do we need to configure Receiver IDoc adapter?

Hi,
Both the sender and receiver IDoc transmission is done by the RFC communication channel.
In case of the sender IDoc, partner profile configuration in the sender system will tell for a particular IDoc type which port should be used. This port will have the details of the RFC channel to be used to deliver the IDoc.
However, in case of SAP XI/PI system we don't configure partner profile and hence we need a way to tell which port & RFC destination should be used to deliver the IDoc and hence we define a receiver aggrement and adapter. This is just used as a reference at rutime and unlike the other adapter, this receiver IDoc adapter doe's not process any message over Adapter engine.
Hope this helps...!!!!
~SaNv...

ADAPTER in the Central Adapter Engine

Hello
I have problem with my Adapter in the Central Adapter Engine. There are to adapter inside, a JMS and A JDBC. This two adpater have in the monitoring status green. But JMS adapter get no message in the system, and by the JDBC adapter the select is not getting Data, but the update make it the right update to the databank. Can somebody help or gives there a log on the system.
Regards Thomas Neuhaus

Hi Thomas,
I think you are using Message Monitoring transaction SXMB_MONI only.
Central Adapter Engine log:
Start Runtime Workbench (i.e. http://<xi_host>:<j2ee_port>/rwb/index.jsp)-> Message Monitoring -> select Component af... -> Display -> select Period -> Start
Regards,
Jiri

Option Adapter Engine of SOAP Adapter Sender

Hi, I have a question, I am creating a Communication Channel Type Sender Adapter Soap and note that the combo box Adapter Engine only appears Adapter Engine Central option and watch some examples of internet show Integration Server option and the section Default XI Parameters. It has to do with the version I'm using? or need to configure anything?. The version I have installed is the PI version 7.1.
Thanks for the support.

Hi, if the adapter XI shows the Integration Server. So in version 7.1 is no longer displayed in the Integration Server in the option Adapter Engine?. The problem is that I am leading this link http://www.****************/Tutorials/XI/SYNCASYNC/Page2.htm see image http://www.****************/Tutorials/XI/SYNCASYNC/Page2.76.jpg and not put in the Adapter Engine and XI Default Parameter. Thanks for the help.

UMS Adapter Error during ums adapter endpoint activation

Hi,
I have well configured the usermessagingdriver-email on SOA11g driver for both imam/stmp protocols, but on deploying process with UMS Adapter (Reciving Notification) i got the error "UMS Adapter Error during ums adapter endpoint activation" with following
javax.resource.ResourceException
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerUmsAccessPoints(UmsEndpoint.java:212)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerApplication(UmsEndpoint.java:99)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.<init>(UmsEndpoint.java:92)
at oracle.tip.adapter.ums.inbound.UmsPollerEndpoint.<init>(UmsPollerEndpoint.java:47)
at oracle.tip.adapter.ums.UmsResourceAdapter.endpointActivation(UmsResourceAdapter.java:183)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:492)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performEndpointActivation(JCAEndpointActivation.java:649)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:633)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performActivation(JCAEndpointActivation.java:387)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisionRegistry.java:593)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.java:445)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisionRegistry.java:409)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionRegistry.java:334)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisionRegistry.java:140)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:103)
at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevisionChanged(AdapterService.java:348)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.processDefaultInSeries(FabricKernelInitializerServlet.java:824)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:773)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Also when I have received email in my mailbox nothing is happened, no new istance has created, but on start soa server 11g all messages which are currently located in mailbox had been processed and ( on usermessagingdriver-email I can saw Messages Received Successfully)
Thanks,
Milos

Hi Saravana
Have you tried : http://technology.amis.nl/2012/05/18/proces-email-with-the-new-ums-adapter-of-soa-suite-ps5/ ?
Regards
A

Can we call and execute a request set using db adapter or oracle apps adapt

Hi,
Can we call and execute a request set(which executes a set of packages in a sequence) using db adapter or oracle apps adapter similar to calling a stored procedure and concurrent program?
thanks,
RV

1) In BPEL call the DBAdapter in a sequence, make sure you set the partnerlink 'property' to transaction=participate.
2) Or create a package that calls the other packages in a sequence
Marc
http://orasoa.blogspot.com

Selected communication channel IDoc_AAE_In is assigned to the wrong adapter type IDoc_AAE Supported adapter types: HTTP, SOAP, XI, WS.

Hi Team,
I have a problem.
I have a scenario using the the Sender Adapter. HTTP_AAE
When I am trying to use the function "Display WSDL" I am receiving the following.
Error:
Selected communication channel HTTP_AAE_In_SAPII is assigned to the wrong adapter type HTTP_AAE Supported adapter types: HTTP, SOAP, XI, WS.
Somebody knows this problem?
Thanks

Hi,
am also getting same error.
think that feature is not supported.
have look on Configuring the Java HTTP Adapter on the Sender Channel - Advanced Adapter Engine - SAP Library for sending a message.
reg,avinash M

Scenarios using Sender JMS adapter and Reciver JMS adapter

Hi All,
I am not able to find god step by step blog on senderJMS adapter and Receiver JMS adapter.
also please explain when we use JMS.What does a messng system means?please provide some examples.
Thanks and regards

Hi Goyal,
Messaging System :
Messaging system allows separate, uncoupled applications to reliably communicate asynchronously. The messaging system architecture generally replaces the client/server model with a peer-to-peer relationship between individual components, where each peer can send and receive messages to and from other peers.
Go thru this you will get better idea :
http://java.sun.com/developer/technicalArticles/Networking/messaging/
JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK.
regards
Ganga

Seeburger EDI Adapter Vs AEDAPTIVe EDI Adapter

Similar Messages

Maybe you are looking for