Seeburger FTP Adapater Config Frage

Hallo Support
Beim Anlegen FTP Adapter Art Kanal in der Kommunikation, Transport Protokoll und Nachricht Protokoll Werte sind nicht immer in der Combobox zur Auswahl. Wir haben bereits über die seeburger FTP und BIC Adapter, wie es im Setup Guide. .
Bitte schlagen Sie vor, wie man in dieser Situation.
Danke und Gruß

Hello
While creating ftp adapter type in communication channel,transport protocol and message protocol values are not getting displayed in the combo box for selection. We already installed the seeburger FTP and BIC adapter as explained in setup guide.[At present we are not having VAN setup in our end].
Please suggest how to go ahead in this situation.
Thanks and Regards

Similar Messages

Problems with Seeburger FTP Receiver adapter

Hello,
I am working on a scenario sending ORDERS05 Idocs to EDI vendors.
For this i have configured Seeburger Receiver FTP adapter with 2 modules to convert XML-EDI format. Since this is the test, I have pointed Seeburger to local FTP server with following settings
Hostname <Hostname of our FTP server>
Port <Port # of our FTP server>
Host Path/VAN partner id <some local directory of FTP server>
Payload mode: Maindocument.
At runtime i received following exception
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 500 'SITE system 1': command not understood>> Details: com.seeburger.jftp.app.exception.FtpExceptionRethrowError: Error in session: {type:FTPConnectionId}{binding:82ea8d3089dc3e898ae2e608d9d8487d}{channel:a52d1aaa8dd63ff59c2f590e78586a77}{toparty:TestEDIParty} CAUSED BY: com.seeburger.jftp.app.exception.FtpExceptionOpenConnectionError: Error while connection to remote host CAUSED BY: com.seeburger.jftp.app.exception.FtpExceptionRethrowError: Error while executing command QUOTE site system 1 CAUSED BY: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 500 'SITE system 1': command not understood>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
Few questions related to this
1] can we use Seeburger adapter to generate EDI files on local FTP server
2] If not Seeburger can we use normal File adapter to do the same. I tried the same by configuring BIC module in File adapter so that it would convert XML to EDI format and was hoping file to be generated on FTP server. It generated one line XML file with following text "<info>Converted message locates in a attachment</info>". Any idea how to retreive attachments in File receiver adapter (as far as i know no attachments are supported in File receiver adapter).
Any idea how to generate EDI files with Seeburger FTP on test server?
Thanks in advance.
Regards
Rajeev

Hi Rajeev,
> 1] can we use Seeburger adapter to generate EDI files on local FTP server
Yes we can use.
> Any idea how to generate EDI files with Seeburger FTP on test server?
It is like a normal process, how to generate the EDI files in normal means without FTP. Check this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
BIC
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948
Regards
Ramesh

Configuring a Seeburger FTP Receiver Adapter

Hello,
I am trying to build a scenario where SAP ECC 6 sends an invoice to a customer via EDI.
We are using ECC 6.0 and PI 7.0 and the Generic Seeburger EDI Adapters. The VAN is a GEIS EDISWITCH VAN (Eircom in Ireland).
I am able to successfully send an IDoc from ECC 6 and into PI where a Seeburger map converts the message to EDI-XML format. I can use a file adapter to create a file in normal EDI format. But I can't get the Seeburger FTP adapter to work with the VAN.
I have configured the correct IP, port, username and password but I keep getting the following message when the communication channel tries to send the message:
<h6>Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 501-Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). >> </h6>
The FTP session is expecting a PUT command with the recipient id and APRF as parameters but these are not getting passed. I suspect this is because I am not passing the correct variables to the receiver adapter but I don't know what variables it expects and where they should be specified. And I can't find the answers in the documentation.
Can anyone shed some light on what I need to do?
Thanks,
Ben

Hi Prateek,
Thanks for your comments. The channel is set to GEIS(GeMarkIII). There is nowhere to specify a directory or filename. The settings I have used are as follows:
Adapter Type: FTP (http://seeburger.com/xi)
Receiver
Transport Protocol: FTP
Message Protocol: GEIS/GeMarkIII
Adapter Engine: Integration Server
Host name: <IP address of VAN server>
port: 21
User Id: <Our mailbox number>
Password: <Correct password>
Host path/VAN Partner ID: <blank>
Script file: <blank>
Transfer type: ASCII
Connection mode: Passive
Use keep alive: <Not checked>
Security Mode: None
Proxy Mode: none
Resource ID: <blank>
Deliver transmission report: <not checked>
Payload mode: Attachment
Attachment ID: SeeburgerMain
Channel status: Active
Use dynamic attributes: <Checked>
Use non-empty attributes: <Checked>
Request displayed report: <Not checked>
Request dispatched report: <Not checked>
Report timeout (minutes): 720
Handle received reports: Refer reports to XI system
There is nowhere in the communication channel configuration that allows me to specify the receiver ID or the APRF. The documentation say this is read from the EDI data and the relevant fields are populated.
Any ideas?
Thanks,
Ben

Seeburger FTP Adapter And SAP PI 7.1

Hi Everyone,
Just a few questions about Seeburger FTP adapter please. Bit of background for clarity, we are doing an implementation using Seeburger FTP and sap PI 7.1 picking up EDIFACT (Orders) and returning (DESADV, ORDERSP, INVOICES). However we are not using any BIC, using another tool for EDIFACT -> EDIFACT-XML conversion (conversion agent) and in-house mapping development using graphical mapping.
So couple of things which I haven't been able to figure out from the standard documentation for Seeburger FTP adapter:
1) First is the functional ACK which we are meant to send back to the VAN is that a STANDARD FUNCTIONALITY with Seeburger FTP adapter?
2) Because we are receiving a mix bag EDIFACT interchange on the way IN, I need to split messages accordingly and pass them on to the relevant channels and mappings. By using the standard module Splitter can I achieve that?
3) Lastly some of the standard validations which are applicable to EDIFACT are they supported within the FTP adapter automatically? e.g. Counting number of messages in one interchange etc.
Any help in this regard will be really great.
regards

Now a Good news.
If you are using Seeburger version 2.1 (which you should be as you want it for PI 7.1), then there is an Internal Classifier and Split option for FTP adapter. You just need to tick checkbox "Use built-in splitting" and you are done. Then I believe there won't be any need for considering all these problems. The earlier version of Seeburger with PI 7.0 doesn't have such option and that could be the reason you haven't received any appropriate response yet.
Still I will reply all your questions considering that "your case is of PI 7.0". -> remember PI 7.0
>>even with just splitter we should be able to break it up?????? or am I wrong in thinking this?
No. You even need BIC or an equivalent custom module for achieving this.
>>I can't visualize where to handle the overall message count in one Interchange any suggestions?
You need to write an adapter module for this. Not sure about the code but this module has to be added before the split happens.
>> seeburger ftp adapter it does talk about a lot of reports which are available on sender/reciever actions. e.g. delivered, despatched etc. Are these reports not essentially ACKs?
These reports are the ones used at the receiver side for getting the ACKs from the receiver. Your requirement is at present for sender scenario.
Regards,
Prateek

Seeburger FTP Pull

Hi,
I'm getting a problem when pulling a file with the Seeburger FTP adapter. The error is logged in the ftp.trc file but I'm not seeing anything in sxmb_moni. Any body would know where the "pulled" file is temporary stored before being processed by the integration server?
Rgds,
Yves

ok, now it makes a bit more sense, you basically got 2 problems:
1.) you can't see the file the FTP has picked up
2.) BIC runs on error
some suggestions to solve
1) See page 43 of the SAPXI_FTPAdapter_en.pdf documentation
Message Dumping
For debugging purposes, it is possible to dump the complete FTP files to a directory on the SAP XI
Server.
Message dumping can be enabled via the J2EE Admin. Go to the ConnectorContainer service and
select the FTP/VAN Adapter. Go to the ManagedConnectionFactory tab and then to the Properties
sub-tab. Now the transmissionDataDump property can be changed:
When the save button is clicked, the adapter is restarted and dumping is activated / deactivated.
Be sure to only use dumping for debugging purposes, since it reduces the performance of
the FTP/VAN Adapter.
The dump files are saved to the <your sap installation>/server0/seeburger/ftp/dump directory.
Another option is, do you use the Seeburger Archiving Solution ? Then you can configure a FileStore before the BIC Module and you'll be able to download the document from the Archive. See SAPXI_Archiving_en.pdf
2) Total Offset 2409, you can check in the file that your Vendor send you it is probably toward the end of the file. Maybe they have an extra CRLF after the IEA, that would confuse BIC or the VAN adds like an EOF, which can't be processed. Maybe that happens when the VAN is decrypting the Message from AS2.
Why don't you do AS2 directly with your Trading Partner and save the VAN cost ?
Regards,
Andrea

Seeburger ftp adapter issue

Hi there,
We have the following scenario. We want to get EDI 861 via ftp from our partner to XI to our R3. The challenge we are facing is getting started with seeburger adapters. We looked into seeburger ftp/van adapter. We are not using VAN. Is it possible to configure this adapter in sender communication channel for our scenario? We tried it, but we are stuck at choosing the message protocol, because we get only the VAN supported message protocols from the drop down menu.
Our goal is to get the EDI 861 from our partner via ftp, parse it to XML representation, map the xml to equvalent IDOC and send it to our R3. Is there a seeburger adapter that receives the edi and parses it into? If yes, how do we go about to solve this issue. Right now, we are not able to configure the adapter right so that we could get the edi flat file via ftp and get the parsed edi xml in xi moni.
Your help is greatly appreciated.
Thanks

Hi,
You need to configure the AS2_MDN_Sender Communication Channel with transport protocol is AS2 and Message protocol is Reports.
Regards,
Ramesh

AS2 Adapter MDN option and Seeburger FTP adapter

Hi Experts,
I configured the a scenario AS2 to File, it takes all the signals from customer and placed in a particular folder, later by using some other scenario it goes to the seeburger workbench and process further.
Now I sent one outbound (810) signal to customer, then we will receive the MDN back, so we receive MDN also in the specific folder (by using the above AS2 to File configuration)? or we need to create separate CC and Sender Agreement by using the sender party?
One more Question about Seeburger FTP adapter
I configured the sender side FTP adapter to pick the functional acknowledgement (997), in the component monitoring it is displaying the below error
"Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ABCFTP/name:Logical resource name for abc to access the FTP mailbox)", I have deleted the old reservation in seeburger work bench resource management, still no luck.
Could you please guide me.
Thanks
Ramesh

Hi Experts,
I configured the a scenario AS2 to File, it takes all the signals from customer and placed in a particular folder, later by using some other scenario it goes to the seeburger workbench and process further.
Now I sent one outbound (810) signal to customer, then we will receive the MDN back, so we receive MDN also in the specific folder (by using the above AS2 to File configuration)? or we need to create separate CC and Sender Agreement by using the sender party?
One more Question about Seeburger FTP adapter
I configured the sender side FTP adapter to pick the functional acknowledgement (997), in the component monitoring it is displaying the below error
"Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ABCFTP/name:Logical resource name for abc to access the FTP mailbox)", I have deleted the old reservation in seeburger work bench resource management, still no luck.
Could you please guide me.
Thanks
Ramesh

FTP Adapter config problem (again :/ )

Hello all.
I know that this topic was discussed few times before but i still cant setup my FTP adapter.
My OS is Win XP. I downloaded free ftp server (XLight FTP Server) and setup my oc4j-ra.xml in following way:
     <connector-factory location="eis/Ftp/FtpAdapter" connector-name="Ftp Adapter">
     <config-property name="host" value="10.172.201.57"/>
     <config-property name="port" value="210"/>
     <config-property name="username" value="szeryf"/>
     <config-property name="password" value="szeryf"/>
     </connector-factory>
where shown ip address is my computer address. I also created user szeryf/szeryf at my local FTP server and tried to connect to that server using some ftp client - with success. Then i created some simple BPEL process to upload file to FTP server. Each time i try i get fault that connection to server failed.
Maybe someone experienced such a thing and could help me with that problem?
Regards,
Chris

Are you sure your ftp server is on port 210? It seems odd.
And is there a reason you are editing oc4j-ra.xml directly? Why not make a partner link and get that working first?

Issues with Seeburger FTP adapter

Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
2. In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this subject...what to expect from this definition.
Thank you for all your replies,
Parimala

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

Difference between Seeburger FTP and OFTP adapters

hi,
Can anybody tell me the difference between Seeburger FTP and OFTP adapters?
On what basis should one make a business decision as to which adapter to go for?
Kindly help urgently.
Regards,
Loveena

Hi ! Loveena
Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
Seeburger Adapters are used to Connect the applications which are using Message protocol/Transport protocol as CrossIndustry(payment), VAN, OFTP, AS2(EDIINT), Generic and EDI based applications.
Re: Seeburger Adapter
Reg seeburger seeburger
installation
https://forums.sdn.sap.com/click.jspa?searchID=2268965&messageID=3210111
OFTP ist a communication protocol. This has nothing to do with the format you have to transfer.
regards the format you have to clear at which standard you have to transfer the messages. This can be any EDI format. At OFTP area the standard are often VDA or ODETTE.
You can create this messages using different EDI adapters (of course also the mendelson adapter ).
Regards OFTP you need additional software which handle the transfer based on the OFTP standard. Mostly you also need an ISDN card for using this protocol.
We can support you with this software for OFTP transport too.
More info also available at http://www.mendelson-e-c.com/.
have a look at the ACTIS OFTP Adapter
Ref: http://www.actis.atosorigin.de/solutions/en/ACTIS_solutions/SAPXI.php
refer this thread also
When we need Seeburger AS2 & FTP?
XI Seeburger adapters
Adapter for OFTP?!
Thanks !!

Seeburger FTP

Hello,
if i have to send a file to a FTP using SFTP.
can seeburger FTP adapter help ? and we will need send or rec FTP adapter for this?
Thank you.

1) seeburger SFTP is a different adapter ? or an option to choose in any seeburger adapter?
2) the script for open SSH gets file from remote server to local server using SFTP. How will we configure the scenario for this?
Thank you

FTP Adapater issues in SOA Suite 11g- ResourceDeadException..

We are losing the process and had to manually re-start the process because of below ResourceDeadException. We are having the FTP adapter connection pool to connect to external FTP server which we are going through the internet. Intermittently some of the connections becoming stale and geting rejected. I appreciate any inputs... Thanks, Saagi
oracle.fabric.common.FabricInvocationException: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'execute' failed due to: JCA Binding Component connection issue.
JCA Binding Component is unable to create an outbound JCA (CCI) connection.
STC_PROV_INS_SM_CS:WRITE_SM [ execute_ptt::execute(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: javax.resource.spi.ApplicationServerInternalException: Unable to get a connection for pool = 'eis/FTP/STC', weblogic.common.resourcepool.ResourceDeadException
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.EndpointInteractionException.getFabricInvocationException(EndpointInteractionException.java:75)
     at oracle.integration.platform.blocks.adapter.AdapterReference.getFabricInvocationException(AdapterReference.java:286)
     at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:272)
     at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142)
     at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:194)
     at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:204)
     at sun.reflect.GeneratedMethodAccessor1149.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy192.post(Unknown Source)
     at oracle.fabric.CubeServiceEngine.postToMesh(CubeServiceEngine.java:770)
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:251)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1009)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:512)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:123)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:63)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:157)
     at com.collaxa.cube.engine.CubeEngine._performActivity(CubeEngine.java:2585)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2444)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1121)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:322)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4497)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4428)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:685)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:682)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:356)
     at sun.reflect.GeneratedMethodAccessor1170.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105)
     at sun.reflect.GeneratedMethodAccessor1125.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:55)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy179.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:409)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:142)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:82)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)
Caused by: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'execute' failed due to: JCA Binding Component connection issue.
JCA Binding Component is unable to create an outbound JCA (CCI) connection.
STC_PROV_INS_SM_CS:WRITE_SM [ execute_ptt::execute(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: javax.resource.spi.ApplicationServerInternalException: Unable to get a connection for pool = 'eis/FTP/STC', weblogic.common.resourcepool.ResourceDeadException
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:432)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeJcaReference(JCAInteractionInvoker.java:541)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeAsyncJcaReference(JCAInteractionInvoker.java:501)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointInteraction.performAsynchronousInteraction(JCAEndpointInteraction.java:479)
     at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:235)
     ... 72 more
Caused by: BINDING.JCA-12511
JCA Binding Component connection issue.
JCA Binding Component is unable to create an outbound JCA (CCI) connection.
STC_PROV_INS_SM_CS:WRITE_SM [ execute_ptt::execute(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: javax.resource.spi.ApplicationServerInternalException: Unable to get a connection for pool = 'eis/FTP/STC', weblogic.common.resourcepool.ResourceDeadException
Please examine the log file for any reasons. Enable FINEST adapter logging via Enterprise Manager.
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAConnectionManager$JCAConnectionPool.createJCAConnection(JCAConnectionManager.java:1372)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAConnectionManager$JCAConnectionPool$JCAConnection.init(JCAConnectionManager.java:1041)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAConnectionManager.obtainJCAConnection(JCAConnectionManager.java:694)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:175)
     ... 76 more
Caused by: javax.resource.spi.ApplicationServerInternalException: Unable to get a connection for pool = 'eis/FTP/STC', weblogic.common.resourcepool.ResourceDeadException
     at weblogic.connector.outbound.ConnectionManagerImpl.getConnectionInfo(ConnectionManagerImpl.java:394)
     at weblogic.connector.outbound.ConnectionManagerImpl.getConnection(ConnectionManagerImpl.java:307)
     at weblogic.connector.outbound.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:115)
     at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:98)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAConnectionManager$JCAConnectionPool.createJCAConnection(JCAConnectionManager.java:1355)
     ... 79 more
Caused by: weblogic.common.resourcepool.ResourceDeadException
     at weblogic.common.resourcepool.ResourcePoolImpl.checkAndReturnResource(ResourcePoolImpl.java:1540)
     at weblogic.common.resourcepool.ResourcePoolImpl.checkAndReturnResource(ResourcePoolImpl.java:1496)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResourceInternal(ResourcePoolImpl.java:375)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:332)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:315)
     at weblogic.connector.outbound.ConnectionPool.reserveResource(ConnectionPool.java:596)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:309)
     at weblogic.connector.outbound.ConnectionManagerImpl.getConnectionInfo(ConnectionManagerImpl.java:352)
     ... 83 more

This is issue with File and Ftp Adapters in the soa installation 11.1.1.2. These adapters not able to recycle the dead connections in the connection pool. Process are receiving the dead connections from the pool. Oracle provided the patch for it. In the patch ftp adapter is throwing out the dead connection pool instead of keeping them.

Assigning dynamic file name in the FTP adapater in OSB 11g

Hi,
I have got a requirement where I need to FTP a file(put operation) with a name which goes like this
XYZ_<abc>_ddmmyyhhmiss. Here <abc> will be coming from a previous DB adpater query and is a column value so, will be dynamic.
I have created a FTP adapter in Jdev and migrated all the files to Eclipse, created a Business service out of it.
I can see the .jca properties in the JCA Transport tab of the business service.
Now my question is how to set the value of FileNamingConvention field in the business service dynamically which i believe would let me set the file names.
Regards,
Satrajit

use the action "set transport headers", setting the value of the jca.file.FileName and jca.file.Directory (if needed) to whatever you want.
This action is available in a Route node only - I believe, not 100% sure

FTP adapter config in clustered environment

Hi,
Here i have two soa servers(soa_server1, soa_server2) in a single cluster(soa_cluster) in one machine.
And after all the repective configurations i'm trying to use the FTP adapter.
When we place one file in FTP input location for processing, it’s been processed by both the servers(soa_server1,Soa_server2) resulting in 2 outputs records of same file.
Whereas I’m expecting only one record as output for one input provided.
Can anybody pls suggest if there are any settings need to made?
Thanks in advance:)

Try adding Singleton property to adapter and set it as TRUE.
For reference check this blog - Mark's Blog: File Adapter in Oracle SOA 11g cluster environment

Seeburger FTP adapter Configuration

Hi all,
Can anyone help me how to proceed with EDIFACT D96A-->Idoc Scenario.
Thanks
Gopi

Hi
you have to configure the sender file adapter at the sender side. in the sender file adapter you have to use the BIC module that will convert the EDIFACT msg into EDIFACT XML message.
the conversion of EDIFACT to EDIFACT XML is done by the BIC mapping E2X.
you can create the E2X mapping using the BIC mapper by selecting the option createE2Xmapping
Thanks
Rinku

Seeburger FTP Adapater Config Frage

Similar Messages

Maybe you are looking for