Seeburger FTP adapter Configuration

Hi all,
Can anyone help me how to proceed with EDIFACT D96A-->Idoc Scenario.
Thanks
Gopi

Hi
you have to configure the sender file adapter at the sender side. in the sender file adapter you have to use the BIC module that will convert the EDIFACT msg into EDIFACT XML message.
the conversion of EDIFACT to EDIFACT XML is done by the BIC mapping E2X.
you can create the E2X mapping using the BIC mapper by selecting the option createE2Xmapping
Thanks
Rinku

Similar Messages

AS2 Adapter MDN option and Seeburger FTP adapter

Hi Experts,
I configured the a scenario AS2 to File, it takes all the signals from customer and placed in a particular folder, later by using some other scenario it goes to the seeburger workbench and process further.
Now I sent one outbound (810) signal to customer, then we will receive the MDN back, so we receive MDN also in the specific folder (by using the above AS2 to File configuration)? or we need to create separate CC and Sender Agreement by using the sender party?
One more Question about Seeburger FTP adapter
I configured the sender side FTP adapter to pick the functional acknowledgement (997), in the component monitoring it is displaying the below error
"Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ABCFTP/name:Logical resource name for abc to access the FTP mailbox)", I have deleted the old reservation in seeburger work bench resource management, still no luck.
Could you please guide me.
Thanks
Ramesh

Hi Experts,
I configured the a scenario AS2 to File, it takes all the signals from customer and placed in a particular folder, later by using some other scenario it goes to the seeburger workbench and process further.
Now I sent one outbound (810) signal to customer, then we will receive the MDN back, so we receive MDN also in the specific folder (by using the above AS2 to File configuration)? or we need to create separate CC and Sender Agreement by using the sender party?
One more Question about Seeburger FTP adapter
I configured the sender side FTP adapter to pick the functional acknowledgement (997), in the component monitoring it is displaying the below error
"Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ABCFTP/name:Logical resource name for abc to access the FTP mailbox)", I have deleted the old reservation in seeburger work bench resource management, still no luck.
Could you please guide me.
Thanks
Ramesh

Issues with Seeburger FTP adapter

Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
2. In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this subject...what to expect from this definition.
Thank you for all your replies,
Parimala

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

Seeburger FTP Adapter And SAP PI 7.1

Hi Everyone,
Just a few questions about Seeburger FTP adapter please. Bit of background for clarity, we are doing an implementation using Seeburger FTP and sap PI 7.1 picking up EDIFACT (Orders) and returning (DESADV, ORDERSP, INVOICES). However we are not using any BIC, using another tool for EDIFACT -> EDIFACT-XML conversion (conversion agent) and in-house mapping development using graphical mapping.
So couple of things which I haven't been able to figure out from the standard documentation for Seeburger FTP adapter:
1) First is the functional ACK which we are meant to send back to the VAN is that a STANDARD FUNCTIONALITY with Seeburger FTP adapter?
2) Because we are receiving a mix bag EDIFACT interchange on the way IN, I need to split messages accordingly and pass them on to the relevant channels and mappings. By using the standard module Splitter can I achieve that?
3) Lastly some of the standard validations which are applicable to EDIFACT are they supported within the FTP adapter automatically? e.g. Counting number of messages in one interchange etc.
Any help in this regard will be really great.
regards

Now a Good news.
If you are using Seeburger version 2.1 (which you should be as you want it for PI 7.1), then there is an Internal Classifier and Split option for FTP adapter. You just need to tick checkbox "Use built-in splitting" and you are done. Then I believe there won't be any need for considering all these problems. The earlier version of Seeburger with PI 7.0 doesn't have such option and that could be the reason you haven't received any appropriate response yet.
Still I will reply all your questions considering that "your case is of PI 7.0". -> remember PI 7.0
>>even with just splitter we should be able to break it up?????? or am I wrong in thinking this?
No. You even need BIC or an equivalent custom module for achieving this.
>>I can't visualize where to handle the overall message count in one Interchange any suggestions?
You need to write an adapter module for this. Not sure about the code but this module has to be added before the split happens.
>> seeburger ftp adapter it does talk about a lot of reports which are available on sender/reciever actions. e.g. delivered, despatched etc. Are these reports not essentially ACKs?
These reports are the ones used at the receiver side for getting the ACKs from the receiver. Your requirement is at present for sender scenario.
Regards,
Prateek

Seeburger ftp adapter issue

Hi there,
We have the following scenario. We want to get EDI 861 via ftp from our partner to XI to our R3. The challenge we are facing is getting started with seeburger adapters. We looked into seeburger ftp/van adapter. We are not using VAN. Is it possible to configure this adapter in sender communication channel for our scenario? We tried it, but we are stuck at choosing the message protocol, because we get only the VAN supported message protocols from the drop down menu.
Our goal is to get the EDI 861 from our partner via ftp, parse it to XML representation, map the xml to equvalent IDOC and send it to our R3. Is there a seeburger adapter that receives the edi and parses it into? If yes, how do we go about to solve this issue. Right now, we are not able to configure the adapter right so that we could get the edi flat file via ftp and get the parsed edi xml in xi moni.
Your help is greatly appreciated.
Thanks

Hi,
You need to configure the AS2_MDN_Sender Communication Channel with transport protocol is AS2 and Message protocol is Reports.
Regards,
Ramesh

FTP Adapter Configuration For End Of File

Hi Team,
i'm doing DB polling and writing that contents to on file using FTP Adapter, DB poller will poll each line @ a time and writes to remote Server
in my FTP adapter usage, after writing the whole contents which i pass from my bpel,
i need to use some hardcoded values at the end of the file
Eg.
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
@@Thanks@@
Like shown above after writing some contents
i need to add @@Thanks@@ then one ENTER
Thanks in advance

Ok, now I'm understanding you are using "Append existing file" option checked... The approach won't work with appending on...
If you know when it is the end of the file you can do something like this...
At the first line file will be like this...
line1|line1
Second line...
line1|line1
line2|line2
When you receive the third line and you know that's the last line you write firstly this...
line1|line1
line2|line2
line3|line3
And then you write the @@Thanks@@ at the end using a different translation schema... Possibly a different FTP Adapter writing on the same file...
line1|line1
line2|line2
line3|line3
@@Thanks@@
However, if you don't know when you are receiving the last line and/or you need the @@Thanks@@ always there it won't work with append option... You'll possibly need a sync read FTP adapter to read the file and rewrite it again at every iteration...
Cheers,
Vlad

FTP Adapter configuration for UNIX env

Hi
Can anyone help in setting up an FTP adapter which will just read files from the given location in a UNIX environment. I have done the same in windows environment with FILEZILLA and it works fine. Now i need to implement the same in UNIX environment. So i have the composite ready. All i need is what settings need to be made in UNIX env..??
Edited by: 944160 on Dec 20, 2012 1:21 AM

Resolved

FTP Adapter configuration

Dear all,
I'm going to use FTP adpater to download and upload file on my FTP server.
bpeltechadp.pdf document shows me that I must edit file Oracle_
Home\integration\orabpel\system\appserver\oc4j\j2ee\home\applica
tion-deployments\default\FtpAdapter\oc4j-ra.xml for FTP connection.
But I could not find that path on my PC, It has OraBPELPM directory (version 10.1.2.0.2) only.
I seem to have to install something on my computer, don't I?
Thank a lot for your help.
An Le

Hello An Le,
Have you installed the SOA server on your system or some other machine?
This path will be available on the machine on which your SOA server ins installed.
Replace Oracle_Home with the path of your Oracle_Home.
Thanks
Rahul

Configuring a Seeburger FTP Receiver Adapter

Hello,
I am trying to build a scenario where SAP ECC 6 sends an invoice to a customer via EDI.
We are using ECC 6.0 and PI 7.0 and the Generic Seeburger EDI Adapters. The VAN is a GEIS EDISWITCH VAN (Eircom in Ireland).
I am able to successfully send an IDoc from ECC 6 and into PI where a Seeburger map converts the message to EDI-XML format. I can use a file adapter to create a file in normal EDI format. But I can't get the Seeburger FTP adapter to work with the VAN.
I have configured the correct IP, port, username and password but I keep getting the following message when the communication channel tries to send the message:
<h6>Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 501-Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). >> </h6>
The FTP session is expecting a PUT command with the recipient id and APRF as parameters but these are not getting passed. I suspect this is because I am not passing the correct variables to the receiver adapter but I don't know what variables it expects and where they should be specified. And I can't find the answers in the documentation.
Can anyone shed some light on what I need to do?
Thanks,
Ben

Hi Prateek,
Thanks for your comments. The channel is set to GEIS(GeMarkIII). There is nowhere to specify a directory or filename. The settings I have used are as follows:
Adapter Type: FTP (http://seeburger.com/xi)
Receiver
Transport Protocol: FTP
Message Protocol: GEIS/GeMarkIII
Adapter Engine: Integration Server
Host name: <IP address of VAN server>
port: 21
User Id: <Our mailbox number>
Password: <Correct password>
Host path/VAN Partner ID: <blank>
Script file: <blank>
Transfer type: ASCII
Connection mode: Passive
Use keep alive: <Not checked>
Security Mode: None
Proxy Mode: none
Resource ID: <blank>
Deliver transmission report: <not checked>
Payload mode: Attachment
Attachment ID: SeeburgerMain
Channel status: Active
Use dynamic attributes: <Checked>
Use non-empty attributes: <Checked>
Request displayed report: <Not checked>
Request dispatched report: <Not checked>
Report timeout (minutes): 720
Handle received reports: Refer reports to XI system
There is nowhere in the communication channel configuration that allows me to specify the receiver ID or the APRF. The documentation say this is read from the EDI data and the relevant fields are populated.
Any ideas?
Thanks,
Ben

How to configure FTP Adapter for multiple endpoints?

Scenario: I have multiple ftp endpoints (5-15) and depending on some business logic, I have to send data to the right destination. With default ftp adapter configuration, I have to add a n adapter connection factory reachable via JNDI for each destination. But I want to read the different endpoints dynamically from e.g. a database and configure my ftp adapter at runtime. That's because the endpoints do change quite often.
Interconnect had such a feature: FTP Sender: The FTP adapter supports sending to multiple FTP endpoints. This feature provides flexibility for sending messages to different remote FTP servers.
Any ideas on that for SOA Suite?
Thanks,
Torsten

For more documentation please send a mail to [email protected]

Error File FTP adapter

Hi,
         We need to connect to a VAN system to poll/post files. We have configured the file adapter in FTP mode, but when trying to post/poll for files, we are getting the following error:
2009-10-09 07:17:57     Error     File processing failed with An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter.     usage: %[recipient id]%[APRF]       where either [recipient] or [APRF] can be omitted.            (to change your current default SEND relationship).            %% (places you in your 'HOME' TR).   &['s'|'single'] ('get' command gets single file).   &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor.
2009-10-09 07:17:57     Error     Adapter Framework caught exception: An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter.     usage: %[recipient id]%[APRF]       where either [recipient] or [APRF] can be omitted.            (to change your current default SEND relationship).            %% (places you in your 'HOME' TR).   &['s'|'single'] ('get' command gets single file).   &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor.
2009-10-09 07:17:57     Error     Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter.     usage: %[recipient id]%[APRF]       where either [recipient] or [APRF] can be omitted.            (to change your current default SEND relationship).            %% (places you in your 'HOME' TR).   &['s'|'single'] ('get' command gets single file).   &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor..
Can we directly connect to the VAN using FTP in PI, or do we need to do perform some other configuration.
Regards,
Shiladitya

Hi,
I think you need to use Seeburger's FTP adapter instead of normal FTP adapter.
Read this discussion for more information:
Re: Seeburger FTP Adapter And SAP PI 7.1
Regards,
Ravi Kanth Talagana

Seeburger FTP Pull

Hi,
I'm getting a problem when pulling a file with the Seeburger FTP adapter. The error is logged in the ftp.trc file but I'm not seeing anything in sxmb_moni. Any body would know where the "pulled" file is temporary stored before being processed by the integration server?
Rgds,
Yves

ok, now it makes a bit more sense, you basically got 2 problems:
1.) you can't see the file the FTP has picked up
2.) BIC runs on error
some suggestions to solve
1) See page 43 of the SAPXI_FTPAdapter_en.pdf documentation
Message Dumping
For debugging purposes, it is possible to dump the complete FTP files to a directory on the SAP XI
Server.
Message dumping can be enabled via the J2EE Admin. Go to the ConnectorContainer service and
select the FTP/VAN Adapter. Go to the ManagedConnectionFactory tab and then to the Properties
sub-tab. Now the transmissionDataDump property can be changed:
When the save button is clicked, the adapter is restarted and dumping is activated / deactivated.
Be sure to only use dumping for debugging purposes, since it reduces the performance of
the FTP/VAN Adapter.
The dump files are saved to the <your sap installation>/server0/seeburger/ftp/dump directory.
Another option is, do you use the Seeburger Archiving Solution ? Then you can configure a FileStore before the BIC Module and you'll be able to download the document from the Archive. See SAPXI_Archiving_en.pdf
2) Total Offset 2409, you can check in the file that your Vendor send you it is probably toward the end of the file. Maybe they have an extra CRLF after the IEA, that would confuse BIC or the VAN adds like an EOF, which can't be processed. Maybe that happens when the VAN is decrypting the Message from AS2.
Why don't you do AS2 directly with your Trading Partner and save the VAN cost ?
Regards,
Andrea

Seeburger FTP

Hello,
if i have to send a file to a FTP using SFTP.
can seeburger FTP adapter help ? and we will need send or rec FTP adapter for this?
Thank you.

1) seeburger SFTP is a different adapter ? or an option to choose in any seeburger adapter?
2) the script for open SSH gets file from remote server to local server using SFTP. How will we configure the scenario for this?
Thank you

Dynamic file name creation using FTP adapter wired from a mediator

Hi All,
My Requirement is as follows....
Mediator is wired to Three FTP adapters to create three files.
File names are dynamic.
In the mediator those three routings, mappings and assignment for the directory and file name are being created.
But out of 3 files, 2 files are being created with the names mentioned during the FTP adapter configuration and the last one is being created
with the dynamic value.
Any help in this regard is highly thankful.
Thank you.
Srivatsasa.

Create a UDF in mapping taking counter from IDoc as input parameter
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String totalFilename = "AAAA_" + counter;
conf.put(key,totalFilename);
return totalFilename;
Map output of this UDF to Top node at target.
you will not be able to see the result in test tab of mapping but it works end to end
Select Adapter Specific Message Attributes in receiver file adapter..here select filename checkbox

How to change the JCA JNDI dynamically using FTP Adapter

We have 5 FTP Servers, each having a directory to poll. We have created 5 CCI instances for these FTP Adapters in the FTPAdapter deployment. We created a BPEL process and using FTP Adapter to connect to above mentioned servers.
Question: Customer's requirement is to use a single BPEL process to poll all these FTP Servers at a specified date and time. How can we connect dynamically to each FTP server at specified time.
(OR)
Is there any way to change the JCAJNDI dynamically in a FTP Adapter configuration ?
I have seen that FTP Adapter POLL doesnt take any JCA JNDI/hostname/un/pwd/date/time dynamically.
Regards
Pavan

Hi Pavan,
It's possible to change the JNDI dynamically but only when you use put operation where you can control the JNDI name at the time of invoking the FTP Adapter as described in below link.
Dynamic JNDI in FTP Adapter | jca.jndi property not picked by Adapter
However, can you consider using BPEL process with SyncRead (and read files through all the JNDIs in a loop) and scheduling this BPEL process to a desired frequency?
Regards,
Neeraj Sehgal

Seeburger FTP adapter Configuration

Similar Messages

Maybe you are looking for