Seeburger IDOC-to-File scenario: Error using Classifier module
Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier classifier
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
classifier attID classifierAtt
classifier destSourceMsg MainDocument
classifier showInAuditLog true
bic classifierAttID classifierAtt
bic destEncoding UTF8
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic mappingName AUTO
bic newLine true
bic srcEncoding UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
Arianne
Hi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
<D_I01>00</D_I01>
<D_I02/>
<D_I03>00</D_I03>
<D_I04/>
<D_I05>ZZ</D_I05>
<D_I06>CELORGS01</D_I06>
<D_I05_2>ZZ</D_I05_2>
<D_I07>AVX</D_I07>
<D_I08>032008</D_I08>
<D_I09>1718</D_I09>
<D_I10>X</D_I10>
<D_I11>00401</D_I11>
<D_I12>000000008</D_I12>
<D_I13>0</D_I13>
<D_I14>T</D_I14>
<D_I15>^</D_I15>
<S_GS>
<D_479>PO</D_479>
<D_142>CLS01</D_142>
<D_124>058895921</D_124>
<D_373>20080320</D_373>
<D_337>1718</D_337>
<D_28>8</D_28>
<D_455>X</D_455>
<D_480>004010</D_480>
<S_ST>
<D_143>850</D_143>
<D_329>800001</D_329>
<S_BEG>
<D_353>00</D_353>
<D_92>SA</D_92>
<D_324>4500005037</D_324>
<D_373>20051110</D_373>
</S_BEG>
<S_CUR>
<D_98>BY</D_98>
<D_100>USD</D_100>
</S_CUR>
<S_FOB>
<D_146>CC</D_146>
<D_309>OR</D_309>
<D_352>FREE CARRIER</D_352>
<D_334>02</D_334>
<D_335>FOB</D_335>
<D_309_2>DE</D_309_2>
</S_FOB>
<S_ITD>
<D_336>01</D_336>
<D_333>3</D_333>
<D_351>45</D_351>
</S_ITD>
<G_SN9>
<S_N9>
<D_128>L1</D_128>
<D_369>GEN</D_369>
<S_MSG>
<D_933>TEST</D_933>
</S_MSG>
<S_MSG>
<D_933>MESSAGE</D_933>
</S_MSG>
</S_N9>
</G_SN9>
<G_SN1>
<S_N1>
<D_98>BY</D_98>
<D_66>92</D_66>
<D_67>6310</D_67>
<S_PER>
<D_366>BD</D_366>
<D_93>Graham Crawford</D_93>
</S_PER>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>BT</D_98>
<D_66>92</D_66>
<D_67>6310</D_67>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>SE</D_98>
<D_93>3M COMPANY</D_93>
<D_66>92</D_66>
<D_67>0000019591</D_67>
</S_N1>
</G_SN1>
<G_SN1>
<S_N1>
<D_98>ST</D_98>
<D_93>SAMPLE</D_93>
<D_66>92</D_66>
<D_67>6310</D_67>
</S_N1>
</G_SN1>
<G_SPO1>
<S_PO1>
<D_350>00010</D_350>
<D_330>10.000</D_330>
<D_355>EA</D_355>
<D_212>10</D_212>
<D_639>PE</D_639>
<D_235>BP</D_235>
<D_234>230-1812-01JDS</D_234>
<D_235_2>EC</D_235_2>
<D_234_2>A00000000000002</D_234_2>
<G_SPID>
<S_PID>
<D_349>F</D_349>
<D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
</S_PID>
</G_SPID>
<S_REF>
<D_128>CO</D_128>
<D_127>4500005037-00010</D_127>
</S_REF>
<G_SSCH>
<S_SCH>
<D_380>10.000</D_380>
<D_355>EA</D_355>
<D_374>002</D_374>
<D_373>20051208</D_373>
</S_SCH>
</G_SSCH>
</S_PO1>
</G_SPO1>
<G_SCTT>
<S_CTT>
<D_354>1</D_354>
</S_CTT>
</G_SCTT>
<S_SE>
<D_96/>
<D_329>800001</D_329>
</S_SE>
</S_ST>
<S_GE>
<D_97>1</D_97>
<D_28>8</D_28>
</S_GE>
</S_GS>
<S_IEA>
<D_I16>1</D_I16>
<D_I12>000000008</D_I12>
</S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne
Similar Messages
-
Hell Experts,
I have done desgin and configuration from Idoc to File Scenario in XI Intergration server.
Source is R/3 and Target system is File. I have successfully configured each and every step. Send Idoc from R/3 to Intergration server and run sxi_cache. But I didn't get successful results, always the error message shows in SXMB_MONI as follows:
Ackn Status contains system error
During the application mapping com/sap/xi/tf/_CUST_MMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeExcep
tion in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
My system Patche level as follows:
SAP_BASIS 640 0012 SAPKB64012
SAP_ABA 640 0012 SAPKA64012
PI_BASIS 2004_1_640 0009 SAPKIPYI69
SAP_BW 350 0009 SAPKW35009
The above error is related to patches problems or any Mapping problems ?
Please help me.
Advanced Thanks.
Regards,
ChandraHi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
i am not sure of the patch levels.
Regards,
Anirban. -
IDOC to FILE Scenario-Error in defining Adapter specific Identfier
Hi All,
I am configuring IDOC to FILE scenario where IDOC will be send from ECC to PI System.I did following configuration
I created RFC,PORT,LS and Partner Profile on R/3 System. I had maintained SLD and IR. In ID I created Configuration scenario and business system.When I click on menu->Adapter specific Identfier where I want to specify IDOC Adapter and RFC Adapter. But it is not allowing to edit it is not editable. As we provide LOGICAL SYSTEM,sender system ID and client number of the sender system.Hi Kavi,
I assume you correctly filled the Logical System of your Business System in the SLD...
Then in Integration Direction, use menu "SLD clear cache".
Always in Integration Direction, open your Business System, go to menu "adapter specific identifier", and... close to button "close", you should have another button like something ''check'' or "compare to SLD' or ''retreive SDL data'' (I have not an openned PI to check the right term). Use this button to get value stored in SLD to this local definition.
Mickael -
IDOC-XI-FILE Scenario: Error in ABAP Mapping
Dear All,
I am working on IDOC-XI-Flat FIle scenario in which I am using ABAP Mapping as per document "How To Convert an IDoc-XML
structure to a flat file and vice versa in XI 3.0".
I created one customized Idoc for this. The Idoc is reacing XI but its flat file is not getting created. Its giving me following error:
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_PACKING_LIST (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I have also gone thru threads posted for the same topic earlier but still I am not been to resolve this error.
Please help me out in resolving this error.
Regards,
N.JainHI,
Log saying that, u have problem in the mapping program.
i.e Z_ABAP_MAPPING_PACKING_LIST
the problem is due declaration of data.
i hope that, you have some methods.
those are declared under intialization section in mapping program.
please use start of selection before the method.
other wise, it will come under intilization section.
warm regards
mahesh. -
Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
JhansiHello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
<pns:name1>ajeet</pns:name1>
<pns:name2>phadnis</pns:name2>
</pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Determination
-->
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked
Hoping to get help from you,
Cheers,
Ajeet Phadnis -
IDoc to File Scenario Error ( IS - Retail )
Hi all ,
I was trying scenario IDoc (SAP ECC 6.0) (IS-Retail) to File scenario .
When i trigerred IDoc from ECC system , it's showing sent successfully to external system or program.
But the problem is it's not coming inside XI sxmb_moni .
I have checked the ALE Configuration and SLD configuration .
Everything is fine.
When i run the TCODE WE05 for IDocs List in XI , it's getting stucked there and the Error showing is
"IDoc: 0000000000000028 Status: IDoc with errors added
External segment name E2WBB01003 cannot be interpreted "
Even i tried with other IDoc WPDWGR it is showing the same error
"IDoc: 0000000000000029 Status: IDoc with errors added
External segment name E2WPW01 cannot be interpreted"Hi Ashwin,
Please check :
1.The SAP system from which you want to import the IDocs contains function modules for calling metadata.
2.You can import IDocs from SAP Release 4.0 and higher.Support Packages Required for IDoc Imports:
Release Minimum Support Package Requirement
40B SAPKH40B48
45B SAPKH45B26
46A SAPKB46A20
46B SAPKB46B12
46C SAPKB46C05
3.check for the authorizations required to import.
Also see SAP Notes 677732 (authorizations), 672745 (missing function modules), 212011 (access to IDoc metadata), and 718320.
check http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a6095507d11d18ee90000e8366fc2/frameset.htm
*Pls: Reward points if helpful*
Regards,
Jyoti -
How to send 100 records from an IDOC to File Scenario without using BPM?
Hi All,
I have a requirement that i need to send 100 records from sap to file by using the scenario IDOC to File. Can you suggest how can i achieve this?
Regards,
Ramvilas.Hi,
Create a H type RFC destination.Tagert host and port give Xi system host and port.Path give the
/sap/xi/adapter_plain?namespace=<NameSpcae>&interface=<Interface> &service=<SenderBusinessSystem>&qos=EO or EOIO.
Go to we21 find xmlhttp port.give the port name and assign RFC.Give the port in we20 your idoc and change to collective.
In Xi export the IDOC and change the occurance to 0-unbounded and import it.
Regards,
Prakasu.M -
Issues in IDOC to File scenario using bussiness service
Hi Team
I found a blog which explains about the IDOC to FILE scenario by using bussinss services. I followed the steps and finally i am getting a error message while posting an idoc in we19 (ie IDOC 09878 was saved but cannot or should not be sent). The setting which have done on SAP side are as below
SAP SIDE CONFIGURATIONS
1. Created RFC destination : RFC_XI_SYSTEM
2. Created port : PORT_TEST
3. created logical system: IDOC2FILE
4. created partner profiles: IDOC2FILE
XI side configurations
1. Created RFC destination: RFC_SAP_SYSTEM
2. Created port : by using IDX1 t-code
DOUBT: here it is asking for PORT, CLIENT,Description and RFC destination, please let me know what values i need to put here, please find the SAP and XI system details below and suggest accordingly.
3. metadata: by using idx2.
DOUBT: here it is asking for IDOC type and source port, i can give the idoc name but i am not getting what i need to give to source prort field, please check and let me know, please find the SAP and XI system details below and suggest accordingly.
SAP system details
Client: 800
User name: sapuser
system id: DEV
system number:10
XI system details
Client:100
username:xisuper
system id: SXI
system numebr: 00
I request you to please check and help to successfullly completion of this scenario. I request you to please provide me the screen shots of the pre-requiste settings and suggest me the steps to debug the scenario.
Thanks in advance.
RajuTo complete your scenario successfully with better understanding of Idoc adapter
read http://help.sap.com/saphelp_nw70/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm.
for troubleshooting refer http://help.sap.com/saphelp_nw70/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm -
Reg:idoc to file scenario
q) In idoc to file scenario i used business service for sender R/3 system and maintained adapter-specific identifiers for it,can i use the business system or business service for receiver system and as it is a cross company environment?
Hi Srikanth,
you can use business system which is created for R3 system.There is no need to use the business service for R3.
can i use the business system or business service for receiver system and as it is a cross company environment?
As it is a cross company envirionment, might be you dont have created BS for u r receiver system in SLD. So it is better to use business service for receiver.
Hope it will gives the idea...
Cheers
Veera -
Error/Doubts in Idoc-XI-File scenario
Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.JainHi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps . -
How to suppress the Acknowledgement Error in IDOC to File scenario?
Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
TirumalHi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy -
Error Resource not Found in SXMB_MONI while doing IDoc to File Scenario
Hi Experts,
I am doing IDoc to File Scenario and I am facing Following Error in SXMB_MONI,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>193c0e01-bd37-11dd-850c-d879ac131b1f</SAP:P1>
<SAP:P2>http://clarityPOC</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_Timesheets_iDocToFile_.class</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tested the same file in test tab of mapping, execution of mapping is successful there.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 5, 2008 7:09 AMHi Dharmveer I have done the cache refresh ID in XI Data Cache Refresh using link
http://sapnbipoc:50000/rep/support/admin/index.html
but still same error persisting
and in Integration Builder> Environment>Cache Status Overview >Problem tab
following error (initial part of the error pasted) is shown
Thrown:
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Adapter Engine af.npi.sapnbipoc not found in SLD
at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:56)
at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:41)
at com.sap.aii.ib.server.abapcache.logons.IR_LogonData.<init>(IR_LogonData.java:26)
Regards,
Nitin Patil -
Error in Operation Mapping for Idoc to File Scenario
Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh. -
Error in TRFC for IDoc to File scenario while sending IDoc
Hi,
Configured of 'IDoc to file' scenario is completed. Executed a stand alone program to post IDocs to XXI system using a RFC destination with required previleges.
Outbound IDoc has status successful, but it is blocked in the source system and can be viewed in TCode: SM58 (Transaction RFC). The error status is set as ':00'.
When I tried menu item 'Edit>>Execute LUW', I got the status message as 'Function module does not exist or EXCEPTION raised'.
For your information, User used in RFC destination is communication user with SAP_ALL profile(in XXI system).
Can anybody help me out in resoving the error?
Regards,
Suraj KumarHi,
Thanks for your reply.
It is successfully tested and FYI as the user specified in RFC Destination is a communication user in destination system (XI), it does not have remote logon.
Hope I am clear.
Please let me know, if you need any further information.
Regards,
Suraj -
Error in IDoc to file scenario
Hi Experts,
I am working on IDoc to File scenario.IDoc is sccessfully reached XI.In SXMB_MONI it is showing error in request mapping.Error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please suggest me in this issue.
Thanks,
Bhuvan.Check this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/bb/ad1c3d2b058c4ce10000000a114084/
You might want to refer to the SAP NOTE: 316877
Regards,
Ravi
Maybe you are looking for
-
How do I read this "standard" table in my Function Module?
I have a remote-enable Function Module (RFC). I am receiving two tables as part of the parameters. Table "A" is header information, and Table "B" is detail information. So for every 1 "A" header record, I may have 1 to many "B" detail records. I
-
How to access komplete 7 sounds saved to an external hard drive?
i recently got logic pro 9 and i also received native instruments komplete 7... now because the library of sounds for komplete is so enormous i was forced to save the files on an external hard drive, however i did leave the actual vsts or programs on
-
Basic transpose (not a complex conjugate transpose) of a complex 2-D array
Hi, folks Just ran an old analysis that I had written in v6.1 where a 2-D complex array is simply transposed (not complex conjugate) for further analysis. Now, under 7.1, the code gives crap results. I've noticed that now LabView automatically perfor
-
Hey guys, i'm a complete noob here so bear with me. I am going to be buying a 20 Inch IMac in the summer or maybe even a 24 inch depending on the answer to the following questions: Can the 24 inch IMac with the 7300 graphics card play Windows games (
-
Placing objects on top of multistate object
is there anyway to place an object such as a button on top of a multi state object? Does the multi state object always go to the front?