Seeburger Message Tracking
Hi,
Can anyone please tell us how to use seeburger message tracking.
I understand that there are 3 steps to be done.
1. Mapping in IR should have a UDF which referrers to the standard Seeburger function jar files.
2. Module configuration in the channel with FileStore module.
3. Configuration in Message Tracking.
But need some details about each step.
Could anyone please provide a document which explains this configuration.
Thanks in advance
Jagruthi
Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh
Similar Messages
-
How to populate the Sender and Receiver GLN/ID in the Seeburger Message Tracking
HI Team,
Scenario :
ECC--> PI--> Party
Sending GS1 XML Message to party (Not EDI). Sender Party and Receiver Party appearing as expected.
BUT User expecting to see the Sender GLN and Receiver GLN in Seeburger Message Tracking.
It should be dynamically picked form GS1 Message. Should Appear in RED BOXES Shown below.What Module Parameters Should be used for this.
I have Tried destTargetMsg and destSourceMsg. But did'nt work.
can anyone please HelpHi Veman
You are correct. For XML to XML, you do not need BIC module.
However, since you are not using BIC module, you will not be able to enrich the metadata using the archiveXI parameter during processing at the adapter framework.
Another place to enrich the metadata would be during message mapping. You can call a custom UDF to populate the metadata and create an entry in Seeburger Message Tracking.
Please refer to the Seeburger manual for Message Tracking Function for more details on how to create the UDF.
Rgds
Eng Swee -
Seeburger message tracking archiving / deleting question
Hello,
We are using Seeburger 1.7 with XI 7.0 for our EDI translations..We store information in Seeburger Message Tracking for our business requirements.I would like to know how these entries could be archived(Compressed) and stored or deleted after certain days so that we wont max up our storage..?
Any suggestions are appreciated.
Thanks in advance!
LarryPrateek,
Thanks for your response.Yes,I could find the "Archive Configuration" option..when I click that it shows me a screen saying show master data with two items with check boxes (Document Types & Archiving Systems)..On clicking the details of them I see set of parameters which shows the profile and the document type..not sure how to proceed from here to set up any archiving / deletion..any help is appreciated..
Regards,
Larry. -
Multi mapping & seeburger Message Tracking (Filestore module)
Hello,
For the people who knows seeburger archiving...
Anybody make the scenario using multi mapping (split in the receiver) with message Tracking seeburger (File Store module in the Receiver Channel)?Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh -
Seeburger Message Tracking Update
Hi All,
I m working on one IDOC to Bank (820 document ) scenario. I am using the File adapter at receiver side and dumping a XML file.
I am trying to Update the message tracking in the seeburger using a function in message mapping which basically uses a UDF which includes use of MTMasterXI.
Any pointers on how to update the message trace in Seeburger Workbench will be appreciated.
Regards..
Sachin DhingraWhat do you mean by "update the message trace"?
You can see the message in Message Tracking tab of Workbench. But before that a bit more settings are required.
- Mapping in IR like you did it by creating UDF. It should refer to the standard Seeburger function jar files.
- Module configuration in the channel with FileStore module.
- Configuration in Message Tracking.
I hope the Message Tracking is already working for you when you click on Message Tracking tab.
Regards,
Prateek -
Seeburger Message Tracking - File Store Dinamic variables
Hello,
I dont have to much information about FileStore Module. I will appreciate if someone have information of this
or
If someone knows how to use dinamic variables with File Store....
Thanks & Regards,
lpbuffHi Suresh,
My question goes because I want to store in MT database some information of my message, but it should be before the message mapping that i use an UDF. Because i have a condition in my Receiver Determination so some message are not going to pass however i want to store some values in the MT database...so i need to store variable in File Store...i dont have documentation of this module so i've just know the usual parameter....
Any idea?...
Thanks!
lpbuff -
Multiple Partners for the same customer in Message tracking of SEEBURGER
Hi,
This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
12345_INVOIC02
34567_INVOIC02
45678_INVOIC02Hi Satya,
you can define for a vendor/customer several partner functions with different
adresses. You can create certain partner roles several times.
If you create a purchase order, than you can choose the wanted
address and partnerrole on the header level. In the standard system you
can use the patner role 'OA' ordering address and for the finance
the 'IP' Invoice presented by.
I hope I was able to help you.
Kind regards,
Zsuzsanna -
Message Tracking for Rosettanet Documents
What are the Options of Message tracking avaialble for Rosettanet documents, I heard from Seeburger that they provide a out of box message tracking tool that we can use if we use one of thier adaptors.
Does SAP Rosettafnet Adaptor also have such features. Currently we use SAP PI very minimally and we are trying to understand if we can extend it's functionality
I am aware of the following options of Message tracking in SAP PI
Runtime Workbench
SXMB_MONI
Are there any other options avaialble?
Thanks for your response
Regards,
MadhuHi,
You may want to see
https://www.advantco.com/product/pimonitor -
Problem receiving from sender, showing in SmtpReceive log but not Message Tracking
Our Exchange 2007 server (SBS2k8 really) has had problems receiving mail from a certain sender the last few weeks. With the SMTPReceive set to verbose, I can see the mail coming in but it never shows up in the message tracking logs.
Looking at similar issues, I thought maybe the content filtering agent might have been grabbing it, so I set up a transport rule to take any mail from this particular domain and set the SCL to 0 as well as bcc a copy of it to myself. But I just noticed
another entry in yesterday's smtpreceive log and that didn't do the trick (or forward a copy to me for that matter).
I'm including some samples from our SMTP log. I can see that when it works, after the 354 Start mail input line, our server sends a 250 2.6.0 code confirming the message has been queued for delivery, at which point the remote server sends a QUIT and
we close it. But when it fails, there's nothing after the 354 line.
Example of good transmission:
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,0,10.0.100.3:25,50.xxx.xxx.xxx:9100,+,,
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,1,10.0.100.3:25,50.xxx.xxx.xxx:9100,*,SMTPSubmit SMTPAcceptAnySender AcceptRoutingHeaders,Set Session Permissions
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,2,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,"220 xxx.xxx.com Microsoft ESMTP MAIL Service ready at Wed, 23 Apr 2014 11:00:49 -0400",
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,3,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,EHLO other.domain.com,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,4,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-xxx.xxx.com Hello [50.xxx.xxx.xxx],
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,5,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-SIZE 26091520,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,6,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-PIPELINING,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,7,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-DSN,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,8,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-ENHANCEDSTATUSCODES,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,9,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-STARTTLS,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,10,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-AUTH,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,11,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-8BITMIME,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,12,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-BINARYMIME,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,13,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 CHUNKING,
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,14,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,MAIL FROM:<[email protected]> SIZE=3497,
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,15,10.0.100.3:25,50.xxx.xxx.xxx:9100,*,08D11000FE2BD02F;2014-04-23T15:00:49.620Z;1,receiving message
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,16,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.1.0 Sender OK,
2014-04-23T15:00:50.073Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,17,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,RCPT TO:<[email protected]>,
2014-04-23T15:00:50.291Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,18,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.1.5 Recipient OK,
2014-04-23T15:00:50.338Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,19,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,DATA,
2014-04-23T15:00:50.338Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,20,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,354 Start mail input; end with <CRLF>.<CRLF>,
2014-04-23T15:00:50.525Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,21,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.6.0 <[email protected]> Queued mail for delivery,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,22,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,QUIT,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,23,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,221 2.0.0 Service closing transmission channel,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,24,10.0.100.3:25,50.xxx.xxx.xxx:9100,-,,Local
and an example of the message not being successfully received:
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,0,10.0.100.3:25,50.xxx.xxx.xxx:10131,+,,
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,1,10.0.100.3:25,50.xxx.xxx.xxx:10131,*,SMTPSubmit SMTPAcceptAnySender AcceptRoutingHeaders,Set Session Permissions
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,2,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,"220 xxx.xxx.com Microsoft ESMTP MAIL Service ready at Thu, 24 Apr 2014 07:57:36 -0400",
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,3,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,EHLO other.domain.com,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,4,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-xxx.xxx.com Hello [50.xxx.xxx.xxx],
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,5,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-SIZE 26091520,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,6,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-PIPELINING,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,7,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-DSN,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,8,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-ENHANCEDSTATUSCODES,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,9,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-STARTTLS,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,10,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-AUTH,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,11,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-8BITMIME,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,12,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-BINARYMIME,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,13,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 CHUNKING,
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,14,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,MAIL FROM:<[email protected]> SIZE=3481,
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,15,10.0.100.3:25,50.xxx.xxx.xxx:10131,*,08D11000FE2BD40D;2014-04-24T11:57:37.220Z;1,receiving message
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,16,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 2.1.0 Sender OK,
2014-04-24T11:57:37.610Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,17,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,RCPT TO:<[email protected]>,
2014-04-24T11:57:37.719Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,18,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 2.1.5 Recipient OK,
2014-04-24T11:57:37.750Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,19,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,DATA,
2014-04-24T11:57:37.750Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,20,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,354 Start mail input; end with <CRLF>.<CRLF>,
2014-04-24T11:57:37.875Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,21,10.0.100.3:25,50.xxx.xxx.xxx:10131,-,,Remote
Interestingly, we used to receive email from this sender in the past. When it stopped working, it didn't quite stop working outright - at some point after the deliveries stopped, 2 made it in, but nothing again since then.Check the agent logs on the machine. The Exchange anti-spam agents log files are found here:
C:\Program Files\Microsoft\Exchange Server\TransportRoles\Logs\AgentLog
If you use Forefront, its agent log files are usually here:
C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\FSEAgentLog
Other software may have its log files elsewhere.
--- Rich Matheisen MCSE&I, Exchange MVP -
Error when trying to access the RBAC User editor and Message tracking
Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Error in Seeburger Message Monitoring
Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha -
Exchange Server 2010 - Message Tracking Logs - Log file creation
Hi,
I would like to find out on the behavior of the exchange server in the way that it logs the message tracking.
Currently the parameter used is
MessageTrackingLogMaxDirectorySize - 10GBMessageTrackingLogMaxAge - 30daysI would like to check when the Max Directory Size has exceeded the value indicated, does Exchange server immediately deletes the oldest log file to make space for the new logs?And in the event that the oldest file is being open or locked, will exchange server delete the next oldest file? or it will reattempt to delete the "locked" file for a period of time?Lastly, when these "oldest" files is not able to be deleted, will exchange server stops logging new tracking events?Thanks!Hi Zack,
Thank you for your question.
If you have configured the parameter of “MessageTrackingLogMaxDirectorySize” and “MessageTrackingLogMaxAge”, we think you have enable circular logging, it will delete the oldest message tracking log files for new log file when the either of the following
conditions is true:
The message tracking log directory reaches its specified maximum size.
A message tracking log file reaches its specified maximum age.
In addition, it didn’t exceeded the value indicated.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
Too many failed message tracking resquests via task in Exchange 2010 SP3
Hi,
We are getting this alert every day and I don't find anything to solve it...
Some days it's Yellow (3%) and the others it's Red (5%)... But we don't have 5% of the messages failed.
Do there is a solution to this problem or even somewhere to look ?To Fix your issue, try to override monitor rule of KHI: Too many failed message tracking requests via task – Red (>5%) and also rule of KHI: Too many failed message tracking requests via task – Yellow (>3%)
Also you can refer below link
http://social.technet.microsoft.com/Forums/en-US/089b0c7c-77c5-47ef-9e48-7e44a8f1d2a1/khi-too-many-failed-message-tracking-requests-via-task-in-exchange-2010-sp1-management-pack?forum=operationsmanagermgmtpacks
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
current scenario exchange 2013 on premise.
our requirement is track the messages send from external domains (from internet)
We are using get-messagetrackinglog command and pipe it to test file.
below is command i am using
get-messagetrackinglog -sender "[email protected]" | fl > d:\user.txt
we not getting any output in the file.
please suggestHi,
From your description, I recommend you follow the steps below for troubleshooting:
1. Please check if you can see the message tracking log on the following folder:
C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\Logs\MessageTracking
2. If no, please restart the Microsoft Exchange Transport Log Search service and check the result.
What's more, here is a thread for your reference:
No Results for message tracking (Note: Though it is Exchange 2010, it is also useful in this issue)
http://social.technet.microsoft.com/Forums/exchange/en-US/8a9906e8-4d6a-4db6-b58e-1fee43dec4ce/no-results-for-message-tracking?forum=exchangesvradminlegacy
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Message Tracking in edge server 2010
Dear All,
any power shell command for tracking message send report and generate delivery status?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATORHi,
Also, we can run message tracking log to monitor the delivery report, please pay attention to the value of “EventID”. For example:
Get-MessageTrackingLog –Sender “[email protected]” –Recipients
“[email protected]” –MessageSubect “Test mail” -EventId "Delivery" | FL
More details about Track messages with delivery reports, please refer to:
https://technet.microsoft.com/en-us/library/jj150554%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support
Maybe you are looking for
-
Smartform Dynamic Ppage Format
Hi All, I need answers to the following questions. 1.I have a smartform for which the page format is Letter, while printing the form depending on some conditions I want to print the form on A4 paper.How can I dynamically change the Page Format, i hav
-
Batch Jobs fail because User ID is either Locked or deleted from SAP System
Business Users releases batch jobs under their user id. And when these User Ids are deleted or locked by system administrator, these batch jobs fail, due to either user being locked or deleted from the system. Is there any way that these batch jobs c
-
Do LR3 and PS CS5 use the same print engine?
I use both of these programs but, after finishing whatever work I have to do in PS, I take the image back into LR for printing. I like the layout there and I certainly seemed to get better results there back when I was using LR2.7 and CS4. With the n
-
How to configure WebLogic to use TopLink?
I am using BEA Workshop to develop a webservice and I am having some issues to make it work. Basically, I am using Toplink plus JAX-WS. The main problem is how to get the EntityManager from the context in order to persist the data into database. Here
-
Actions, artboard, pdf
Hi! Im wokring with PDF-files with some drawings in it. Working with Illustrator CS5.1 The pdf's originally artboard size is 2750mmx625mm and uses CMYK colors. I also got artboard size 3000mmx600mm I have about 50 pdf-files of those two sizes. I want