Seeburger Splitter adapter!!

hi,
what is Seeburger splitter adapter ?how does it function?
can configure splitter adapter as a module like BIC adapter and Module?
thank you,
babu

Hi Babu,
The splitter is configured with the Functional Acknowledment in Seeburger, this component works in combination with the Seeburger Classifier. For example:
1. You receive a document EDI with the Classifier in a communication channel and this execute the map with the document type sand the version number.
2. The Functional Ack. is generate from the result of the conversion in the map.
3. You have other communication channel configured with the Splitter in a mode Sender.
4. With this, you can map the Functional Ack of Seeburger to a document 997.
5. You have other communication channel with a Receiver mode, to send the result of the mapping process to a SAP or any destination.
This funcionality works with the XI FTP adapter(File), with the FTP Adapter or any other Adapter to receive a document EDI.
You need deploy the 997SplitterMetadata.xml from installation CD with Integration Design and loaded as Adapter Metadata.
To use the splitter, you need configure in the communication channel in the module chain, the BIC and the classifier, in the bic parameters, you define the splitter with true value.
For a example to this component, you can use the Functional Acknowledgement documentation from Seeburger manuals, this have a example to this funcionality.
Greetings,
Hervey

Similar Messages

  • Error with Seeburger Splitter module

    Hi all,
    I had configured Seeburger Splitter and using seeburger splitter module in file adapter with classifier,convertor and splitter in same sequence.But,while testing i m getting null
    error for sender file adapter in communication channel monitoring.It isn't able to process the file placed in directory.
    When audit log of same is seen,it shows
    ERROR : getXmlContentFromMessage()
    ERROR : process()
    ERROR : Attempt to process file failed with null
    Any inputs why is it so.
    Regards,
    Anoop

    Hello Ravi,
    We have seen this issue on a few occasions.  It might be related to the ConverterJNI class.
    In the defaulttrace file you can check for error such as
    Caused by: com.sap.i18n.cp.ConverterRuntimeException........
    Got exceptions: null
    at com.sap.i18n.cp.ConverterJNI.<clinit>(ConverterJNI.java:46).....
    If this  is the case, Then the problems is within the Startup Framework. I would advise you to update the Startup Framework as described in note #710914.
    Thanks,
    David

  • Seeburger FTP Adapter And SAP PI 7.1

    Hi Everyone,
    Just a few questions about Seeburger FTP adapter please. Bit of background for clarity, we are doing an implementation using Seeburger FTP and sap PI 7.1 picking up EDIFACT (Orders) and returning (DESADV, ORDERSP, INVOICES). However we are not using any BIC, using another tool for EDIFACT -> EDIFACT-XML conversion (conversion agent) and in-house mapping development using graphical mapping.
    So couple of things which I haven't been able to figure out from the standard documentation for Seeburger FTP adapter:
    1) First is the functional ACK which we are meant to send back to the VAN is that a STANDARD FUNCTIONALITY with Seeburger FTP adapter?
    2) Because we are receiving a mix bag EDIFACT interchange on the way IN, I need to split messages accordingly and pass them on to the relevant channels and mappings. By using the standard module Splitter can I achieve that?
    3) Lastly some of the standard validations which are applicable to EDIFACT are they supported within the FTP adapter automatically? e.g. Counting number of messages in one interchange etc.
    Any help in this regard will be really great.
    regards

    Now a Good news.
    If you are using Seeburger version 2.1 (which you should be as you want it for PI 7.1), then there is an Internal Classifier and Split option for FTP adapter. You just need to tick checkbox "Use built-in splitting" and you are done. Then I believe there won't be any need for considering all these problems. The earlier version of Seeburger with PI 7.0 doesn't have such option and that could be the reason you haven't received any appropriate response yet.
    Still I will reply all your questions considering that "your case is of PI 7.0". -> remember PI 7.0
    >>even with just splitter we should be able to break it up?????? or am I wrong in thinking this?
    No. You even need BIC or an equivalent custom module for achieving this.
    >>I can't visualize where to handle the overall message count in one Interchange any suggestions?
    You need to write an adapter module for this. Not sure about the code but this module has to be added before the split happens.
    >> seeburger ftp adapter it does talk about a lot of reports which are available on sender/reciever actions. e.g. delivered, despatched etc. Are these reports not essentially ACKs?
    These reports are the ones used at the receiver side for getting the ACKs from the receiver. Your requirement is at present for sender scenario.
    Regards,
    Prateek

  • How to deal Inhouse files using Seeburger AS2 adapter...!!!

    Hi all,
    Has anyone managed to configure the Seeburger AS2 adapter for XI successfully to process multiple inbound message types.
    We have an issue here with inbound messages being received by the AS2 adapter. We currently have it configured for inbound deliveries(Which deals with EDI files) which is working fine. The issue is that we would now like to send other messages as well. It seems the AS2 adapter only looks at the sender/receiver party combination to determine the correct sender agreement, but does not look at the message type which is a limitation. I have heard mention of a splitter module which can be used to distinguish between different messages and pass them to the correct sender agreement for processing, information on this is thin on the ground to non existent.
    I have few custom Inhouse files where i need to recieve through AS2 adapter.
    I need to differentiate the messages hitting to my communication channel.
    ex:
    1st message will be having
    HDR PICKS
    2nd message will be having
    HDR PURCH
    so based on the second field which has "PICKS" or "PURCH" , i need to pass the message to run the corresponding map.
    How i need to configure to acheive these kind of custom Inhouse files through AS2 adapter??
    Do i need to use splitter for these as well?? If yes how i need to use?
    Is there any setting we can make at Sender AS2 adapter to differentiate each message??
    Waiting for the answers.
    Kindly reply if anyone knows.
    Thanks&Regards
    Seema.

    Hi,
    i have setup a scenario with edifact (different message types) using as2.
    first i had to create a mapping using bic.
    edifact_xxxx
    in: edifact_service
    out: functional acknowledgement.
    in the mapping code i adjusted the called mapping, standard it will use see* changed it to e2x* (custom mapping)
    in your case using flatfiles maybe you should take a look at the VDA structure, these files are also defined under inhouse.
    when you define a input file adapter are you getting a classifier message?
    like
    <classifier><type>Edifact</type><classifierMappingID>XXXX</classifierMappingID><encoding>US-ASCII</encoding><additionalIdentifier></additionalIdentifier></classifier>

  • Seeburger AS2 Adapter sending message error

    I have configured a FAck scenario as described by the Seeburger Manual and am testing a AS2 messaging scenario with a vendor (basically the inbound EDI message is passed to the Seeburger splitter to create a new message for the inbound order, and then the existing payload is mapped to a Funcational Acknowledgement and sent back to the vendor).  I receive the message fine and the message split to create the order works fine, however when the FAck is passed to the AS2 receiver adapter (for transmission to the 3rd party) I get the following error:
    LOCATION [null, null, 91fcf4f0-5223-11dd-9c8d-5cd90a641602] >> ERROR TYPE [, COMPONENT_ERROR, not retryable, not fatal]] >> DESCRIPTION [AS2 Adapter failure >> MID
    MID <[email protected]22.2> already exists. - Duplicate will not be sent [LOC: com.seeburger.as2.component.AS2Client.storeMID]
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]22.2> already exists. - Duplicate will not be sent, SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]22.2> already exists. - Duplicate will not be sent
    I'm not sure where the "duplicate" message comes from as this message definitely has not been sent before.
    If I extract the same inbound message from the payload and pass it in using a file adapter (rather than the AS2 sender adapter) then the functional acknowledgement is created and transmitted to the vendor without any issues ... 
    Has anyone who has had some experience with the Seeburger AS2 adapter got any possible suggestions for resolving this issue?
    Regards,
    Jason

    Hello ,
    same issue occurred in my system
    Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]> already exists. - Duplicate will not be sent, SEEBURGER AS2: AS2 Adapter failure # MID <[email protected]> already exists. - Duplicate will not be sent
    I'm not sure where the "duplicate" message comes from as this message definitely has not been sent before.
    Has anyone who has had some experience with the Seeburger AS2 adapter got any possible suggestions for resolving this issue?
    Please advise asap.

  • How to file mask in sender seeburger SFTP adapter

    Hello Gurus,
    Please help on
    How to perform a file mask in sender seeburger SFTP adapter? eg. I want to pick all the files but not *.tmp files.
    thanks
    Kishore

    Kishore
    A work around:
    Use another interface File to file (By pass) using file adapter which does the mask exclusion of the file which are not required.
    Regards
    Raj

  • Client Auth  and SSL with Seeburger AS2 adapter

    Hello All,
    We are using the Seeburger AS2 adapter in our landscape and I am in the process of setting the same up and have made quite some progress in all my issues.
    and I  hope that you will be able to help me out.
    1. Server SSL on Receiver AS2 adapter
    I am sending a message from XI using the Receiver AS2 adapter to my AS2 test tool using Server SSL.
    This is working perfectly fine. In my AS2 adapter I have selected HTTPS as the protocol and the message goes via SSL to the target test tool, is processed and the MDN comes back to XI perfectly.
    The issue here is :
    Irrespective of what is provided in the Server Certificate ( Keystore) , the message goes to my target test tool. I even left this field blank with no certificate entry and still the SSL connection was established and the message went to the target system.
    Is there no validation that XI does here? I am lost what is the use of this entry Server Certificate if XI blindly accepts all SSL connections.
    I am using a Decentral Adapter Engine with LoadBalancer.
    2. Client Auth on Receiver AS2 Adapter
    I tried to perform Client Authentication by proving my Server's private key in the AS2 adapter. The corresponding public key is loaded in my partner's Keystore.
    XI error's with the error "SSL handshake failed - Bad Certificate" .
    I am not sure why XI is erroring out here and I have a feeling that I have misunderstood the use of the fields in the AS2 adapter,
    Server Certificate ( Keystore) and Private Key for Client Authentication.
    Has anyone tried this? If further details are needed, I will be able to furnish the same.
    Regards,
    Bhavesh

    Hello Jens,
    Thanks for your reply.
    1. The Encryption and Signature part of the Interface is working absolutely fine and I use the same concept highlighted by you - The Sender always signs the message with his private key and encrypts with message with the partner's public key in the corresponding agreement.
    2. Server SSL is also working perfectly fine, i.e, when XI initiates the connection the SSL connection is established to the partner.
    3. Mutual Auth was the issue where I was getting the bad certificate issue.
    To investigate further I moved the same setup to my Central Adapter Engine and all the issues I had described above seem to have vanished and things work exactly as I was expecting, ie.
    The field : Server Certificate (Keystore) is used to provide the Target System's Server SSL's public Certificate.
    The field : Private Key for Client Authentication is used where XI provides its own Server SSL's private key for Mutual / Client Authentication.
    The problem seems to be with my Decentral Adapter engine and not my central adapter engine and so I guess,
    1. I either have the incorrect certificates on my Decentral Adapter Engine.
    2. I also have 2 instances of a Decentral Adapter Engine with a Webdispatcher and so maybe the 2 Visual Admin's of the 2 Decentral AE are inconsistent.
    3. Maybe it was just a long day and I did something wrong
    Will investigate further for the root cause but I am glad that my concepts remain intact and things do work as I expected them to work.
    A blog on all this is on the cards sometime soon.
    Cheers,
    Bhavesh

  • Error in communication channel AS2 Seeburger EDI Adapter

    Hi,
    I am facing one issue in communication channel at receiver side. Adapter type is AS2 Seeburger EDI adapter.
    Brief overview of scenario: Sender is R/3 sending an IDOC and Reciever is Party (Vastra_Gotaland).
    The error in reciever communication channel is : Error type: REPORT_ERROR >> Error date: 8/26/10 10:18 AM >> Description: MIC not verified # integrity-check-failed [8/26/10 10:18 AM].
    Please give your important feedbacks.

    Hi Vikrant,
    I have already checked channel configurations and there is no problem with signing certificate. I have checked that also.
    Edited by: Sadhna Achhra on Aug 26, 2010 1:10 PM

  • Seeburger AS2 Adapter implementation in PI 7.1

    HI Experts,
    We have seen lot of implemetation of seeburger adapters in PI 7.0 but didnt got any chance to look ahead for any documents related to seeburger AS2 adapter implementation in PI 7.1 .
    Request if you can please guide or provide some hands on documents which can give the clear overview of how to configure AS2 adapter in PI 7.1 and its parameters.
    Thanks & Regards,
    Abhishek

    Hi,
    refer the blog by prateek:-
    http://wiki.sdn.sap.com/wiki/display/XI/ParametersUsedinModuleProcessingforSeeburgerAS2AdapterforSAP-PI
    u can also refer other blogs for details search on SDN
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=seeburger
    I think everything remains same.
    chirag

  • How to log inbound messages for Seeburger OFTP-Adapter

    Hello,
    we use the XI 3.0 SP9 with the Seeburger OFTP-Adapter to exchange EDI (ODETTE) Messages. At the moment we have the problem, that we don't see any inbound calls from our edi-partner in the logfiles of the oftp-Adapter. We can successfully connect to the ofpt-adapter by using telnet (as described in the documentation).
    Do anybody know, how we can log the incoming calls?
    Thanks!
    Stefan

    Hello Stefan,
    the SEEBURGER Adapters are using  the certified AdapterFramework Log Infrastructure. You can for example see the Logfiles with the J2EE Engine LogViewer.
    First you have to make sure anything is logged: In the "Log Configurator" you find in the
    |ROOT/Applications/Exchange Infrastructure/
    category a child named
    |  .../AdapterFramework/ThirdPartyRoot/
    under this subtree there is the
    |   .../SEEBURGER/
    tree where you find the technical adapters (like OFTP). Define here an loglevel of INFO or DEBUG.
    Then you can access the logs in the J2EE Administrator service "Log Viewer":
    |Cluster/Server 0/usr\sap/
    |..SID\DEVBMGS00\j2ee\cluster\server0\log
    |....applications
    |......com.seeburger.xi.oftp
    |........oftp.log
    You can also see this as a file on the system where the AF is installed (however it is better readable with the Log viewer):
    /usr/sap/XIT/DVEBMGS00/j2ee/cluster/server0/og/applications/com.seeburger.xi.oftp
    I have some screenshots which will make this more clear, please drop me an email so I can send them to you: [email protected]
    Greetings
    Bernd

  • Seeburger SFTP adapter

    Hi
    I want to transfer the file from one location to another locatoin through Seeburger SFTP adapter, is it possible?, If yes could you please suggest how to do and provide any documents/links.
    By using File adapter we can send the data
    /people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
    Like this i want to send the data through SFTP.
    Thanks
    Ramesh

    I had a same question long time back.
    The way to do this is - Exchange the server keys ( Your admin can generate it)
    Install the keys ( server keys ) from the target system in your source server ( where you have SFTP adapter installed). If you have user id and password you can choose in the drop down of the SFTP adapter.
    Yes, FIle adapter is configured to pick the file and virual receiver.
    Another pointer was - there are some fields which are mandatory like mapping where you can use DUMMY.
    To send to the target - configure the receiver adapter.
    Make sure your fire wall is open for the port needed for SFTP.
    -Sanju

  • Seeburger EDI Adapter Vs AEDAPTIVe EDI Adapter

    Hello all,
    A client, who already works with SEEBURGER wants to test the AEDAPTIVe EDI Adapter.
    I would like to know if someone has already worked with this 2 EDI Adapter and if there is a big difference between then.
    I have already worked on Seeburger EDI Adapter but not Aedaptive...
    I know it's a very specific question, hope i find someone who did it..
    Regards,
    JP

    Hi,
    Did you already test AEDAPTIVe's EDI?
    Gordon

  • Seeburger EDI Adapter: skill preperation

    Hi everybody,
    we will soon install the seeburger EDI Adapter for some EDI scenarios.
    Could anybody suggest who we can prepare ourselfs for this?
    Which documents should we read. Whcih additional knoledge do we need to have (e.g. BIC Mapping Designer)
    Thank you for any useful hints
    Regards Mario

    The seeburger adapter comes with documentation from Seeburger on how to use it. That is the best document you can read to implement.
    Others -
    About EDI - EDI Overview
    BIC - /people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
    Of course search SDN itself for more info

  • Seeburger EDI Adapter

    hi experts
    provide ma details on SEEBURGER EDI Adapter.
    Thanks in advance

    Hi
    have a look
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Thanks

  • Seeburger EDI Adapter Installiation

    Hi,
    Just now we installed Seeburger EDI Adapter, I want to make sure we installed correctly. what are the components I can verify in IR/ID. Is there any post installation steps.
    Mallik

    Hi Malik,
    during installation you have to follow Seeburger installation manuals like SAPXI_SeeMasterInstallationGuide_en.pdf, SAPXI_BICAdapter_en.pdf etc.
    You also can check installed components in SDM or take installed component information from http://10.10.27.80:50000/sap/monitoring/SystemInfo.
    Regards
    Naycho

Maybe you are looking for