Seeing a clip in compressor vs actual export file

i am having issue exporting out of Final Cut Pro 6.0.1 using compressor... Once I have clicked export using compressor, compressor opens. I export the file to my desktop. At that time, compressor opens. However, when i preview clip in compressor, clip is one single clip in project, not the entire sequence. I took the export and put into trash, went back in final cut and exported again, now the video is correct, however, the audio is coming from the one clip. I have exported many projects out to compressor over the past few months, however, this is the first time i have experienced this issue.... Any help would be greatly appreciated....
Thanks,
JBK

I am trying to export the entire timeline. I have the sequence file highlighted when exporting... The other thing that I have noticed is that once the file has been exported, I close Compressor and the Project is still opened in Final Cut Pro... Now when I close compressor, the timeline in Final Cut Pro is missing and the project is closed... It appears that I might have changed a setting somewhere that is causing me the issues... Still having problems... Any Help would be greatly appreciated...
thanks,
jbk
Message was edited by: jbk59

Similar Messages

Compressor 4.1: exporting files to import into DVD Studio Pro

Hey folks,
Having issues trying to figure out how to generate both the .m2v and the .ac3 files to import into my "legacy" application of DVD Studio Pro. I have separate projects all done...clients waiting... and ready to export from FCPX.
It seems that the only function that this new Compressor can do, is to build the files and then automatically build and burn a DVD. I need to create my own menus and chapters. I USED to be able to do this in my older version of Compressor easily.
Am I stuck? I did not know that this version would act in this manner in the "upgrade". If I could...I'd rather have my older version back!

Select the job. In the Inspector choose When Finished, Do Nothing.
You will get the two elementary files saved to whatever location you specify. You can import those files into DVDSP.
Russ

Convert a web clip widget into an actual dashboard widget with Dashcode?

So, I have created a widget using the Safari web clip option. I want to make it a permanent widget & not have to recreate it every time I relaunch my computer. I know Dashcode is used to make widgets, but is there a way to take my web clip widget and save it/export it and import it into Dashcode and make it a true widget I can save and have in my dashboard at all times?
Or does Dashcode only allow for building a widget from scratch?
At this time, I see no place where my temporary web clip widget has been saved on the computer, so not sure where it is even living to try to import it?

bump.. any help?
I have used some utilities to reveal hidden files and I cannot even find a hidden webclip widget of the widget I made... so I have no idea where its data is stored as it is not in either the root or users "widgets" directory. The webclip widget I made persist through relaunches of the computer, but is not an available widget in your dashboard to select from so if you close it, you have to go back and remake it.

Problems exporting files using xFire video clips

Hi - first time posting.
I recently started using XFire to record videogame footage from my PC. I would then take the clips into Adobe Premiere Pro CS6 and edit them, and now I'm ready to export them so I can re-edit them (because editing with the xfire codec is quite a hassle) and ultimately upload them.
In this particular example, I'm exporting to the HuffYUV format - this is what happens: http://www.youtube.com/watch?v=_jHBhpl_3G0
This clip is 90 seconds long, exported in the HuffYUV codec, 360x240 (to keep the file size down) - but as you can see, at around 0:54 and then again at 1:15, the video would freeze, rendering the clip unuseable.
I've tried various formats and sizes - I'm trying to export at 1440x960, and I've tried HuffYUV, Lagarith, Raw (No Codec), MicrosoftVideo1, etc - most of them, when I make a 30sec clip, it works fine, but when I make the 90sec clip, most of them would start having the frozen frames at ~2 seconds in, but all the file formats do eventually have a frozen frames.
I've tried converting the xfire video clips BEFORE putting them into Premiere by using Media Coder (not the Adobe one), but the result looks something like this: http://www.youtube.com/watch?v=p8LEO3fGSaM&t=0m17s - you can see horizontal interference as well as a lot of jumpy frames
I just got this computer a few months ago - I'm using Windows 8, 64-bit, 16gb of ram.
So, what's happening? What's the best way for me to fix this? Thanks in advance.

The most likely reason is that you are attempting to export a muxed mpeg file. QT will not export sound from such files. QT Mpeg Limitations
This freeware will export to a number of different formats from mpeg with the sound and video intact. Mpeg StreamClip

See which clips are already used in the sequence

hi there,
I am a complete newby for mac and fce
I started a project for my dive video in the Filippines.
I have like a 1000 clips in the browser.
Is there a way in fce to see which clips are already use in the sequence and which are not?
In pinacle studio they were marked with a red v

This is a way to solve your problem.
http://discussions.apple.com/thread.jspa?threadID=2283002&tstart=0

Exporting multiple clips from one sequence as separate files.

Hello fellow editors!
I have about 100+ video files that I want to cut into shorter clips, edit a bit and then export in a Final Cut friendly format (currently they are AVCHD mts files) to send it to my friend, who is putting the whole movie together.
I dont want to use Final Cut for this ( I cannot, I have a windows machine) and I was hoping to work with premier CC and media encoder CC.
There is a way of putting all clips in one sequence and then nesting each one, then you can send them to Encoder CC and it will render them as separate files - thats is just not very productive, nesting clips one by one and it takes forever for Encoder to import sequences.
I was wondering if there is a better workflow? I heard that Final Cut has shortcuts to do this very easily, you just click on all those clips in sequence and "batch export" them, which puts them in some place as separate, already cut files.?
Anything? I love premier, let my feelings be justified!)

Kevin Monahan ...
Lucid George is right ... select one trimmed clip, File->Export->Media, you can choose whether in-out or entire clip.
Select MORE than one clip, you get a completely different export box ...
These two selections were "exported" from that bin created by dragging the trimmed clips from the timeline to a new bin ... I don't know what else one is supposed to do. You can't even select multiples clips and batch sub-clipping, which would at least cut the steps down.
Neil

How do i see video clips already imported in to an event?

How do i see video clips already imported in to an event?
I have already created and shared one movie project from the clips and from photos but now want to make another. However, when i go to the library it only shows me the content of the first project, including the photos, not all of the video clips i originally imported. I can't believe that I need to import them all again.

It seems to me that you must have imported your clips using iMovie 9, (that's why they are all in the Events folder which belongs to iMovie 9). Then you must have upgraded your current project to iMovie 10 which will have put the clips used in that project (but not all the others) into your iMovie 10 library. iMovie 10 has a totally different storage arrangement for media. You should be able to update your other iMovie 9 projects by choosing File > Update Projects and Events in iMovie 10. See: http://help.apple.com/imovie/mac/10.0.8/#/mov902ad0c31
This does not stop you from continuing to use the projects in iMovie 9 though any further editing you do will not be transferred to the other version of iMovie.
Geoff.

I've edited my NEF photos in lightroom and have tried to export to a formatted CD. When I try, I have several issues. I either see in the top left corner that the files are ready to go to CD but there is no further instruction or I get the pop up message

I've edited my NEF photos in lightroom and have tried to export to a formatted CD. When I try, I have several issues. I either see in the top left corner that the files are ready to go to CD but there is no further instruction or I get the pop up message that the files are offline or missing??

Just for background, in what format are you exporting your images? Also, are you able to export them to your hard drive in your chosen format? I haven't tried exporting directly to CD, but if you're able to export to hard drive and copy to CD, that may be one solution.

Working with fcp 6.0.6 I can't see the clip in the viewer until I start or play. Used to show fine.

Working with fcp 6.0.6 I can't see the clip in the viewer until I start or play. Used to show fine.

This is the FCPX forum.
Sounds like the viewer is in wireframe mode or is alpha display mode. If this isn't the case you need to go to the Final Cut Studio forum and give more details.

Is there a way to visually see what clips are used in the timeline?

In FCP, is there a way to see in the browser all the clips that are being used in the timeline?
What I am looking for is a column that has a check mark in it if the clip is being used in the timeline.
In a big project, it would be good to visually see what clips have yet to be used.
Just wondering.
Ian

This probably isn't exactly what you're looking for, but you can turn on show duplicate frames in your timeline.
There is an option in the sequence>timeline settings that when turned on will put a red line under any footage that is duplicated in your sequence.
However there must be a reel number assigned to the clip and the timecode must be unique in order for it to work properly.
Another work around might be to color code each clip as you use it in your browser.

I can't see my clip in viewer

Hi Guys
Can you help please?
I'm using Speedgrade CC
Windows 7, Service Pack 1 64 Bit
8 Gb Ram
Intel HD Graphics 3000 Card
I can't see my clip in the viewer, although I think that there may be a tiny represetation of it in the bottom left hand corner of the view. (Resizing doesn't help)
Can any of you boffins shed a bit of light please?
Here's a screen shot. Hope it helps.
Thanks for you help.
Simon

Thank you guys but unfortunately neither of those fixes worked. Having done some more research I can see that others have had an identical problem. However, it looks like those with my graphics card didn't manage to find a solution. http://forums.adobe.com/message/4488205
Ho hum. I really don't want to have to buy a new PC but I guess that may be the only options, as it's not possible to upgrade the graphics card on my laptop.
Really appreciate your efforts though.

Lorsque j'applique l'effet "stabilisation de déformation" sur un clip puis que je l'exporte, la vidéo se met à clignoter

Bonjour,
Voici mon problème que je rencontre sur la dernière version de Première Pro avec mon MacBookPro Retina 2014 :
Lorsque j'applique l'effet "stabilisation de déformation" sur un clip puis que je l'exporte, la vidéo se met à clignoter, je rencontre seulement ce problème lorsque j'applique la stabilisation, sinon tout les autres plans ne clignotent pas. J'ai essayé de voir si c'était un problème d'encodage mais le problème ne fait que persisté.
Merci d'avance pour votre aide

Voici la marche à suivre sur Mac :
fichier > réglages du projet > généralités, et sélectionner Logiciel Mercury Playback Engine dans le système de rendu
Ensuite procéder au rendu du projet avec : séquence > rendu de l'entrée à la sortie
Je ne veux pas cracher dans le dos d'Adobe, mais je tiens quand même à préciser que l'aide d'adobe ainsi que le service en ligne n'a pas su me répondre.

Hi i have an apple macbook air, and i have a problem the starting my mackbook air i dont know that whats the problem, i wana share a video clip 4 u see the clip and tell me that what i do or resolve this problem 1st tell me ho can i post hre my video clip

Hi i have an apple macbook air, and i have a problem the starting my mackbook air i dont know that whats the problem, i wana share a video clip 4 u see the clip and tell me that what i do or resolve this problem 1st tell me ho can i post here my video clip ?

Which Mac OS X is installed.
Troubleshooting advice can depend on that information.
Without seeing a video, tell us exactly what happens when you startup your Mac?

My Compressor Export file not liked by a program

Hi,
So my Quicktime Movie export files from Motion are not being allow to be imported into a audio program i use (Ableton Live)....I've tried H264 and PJEG both at 640x480 and 29.97
I've checked had no problems importing movies that had the same settings as those above
into Ableton.
I then discovered that if I opened the QT movies in QT Player and then re-exported them with the same settings....that those files were then able to be imported into the program.
In the H264 re-export it seemed to create a smaller file.
in the PJEG re-export it created a much larger file.
but both could be imported into Ableton Live.
Is Compress QT export creating a wierd header on the QT files?
Should I be turning on/off such things as:
premultiply alpha
active camera
lighting
field render
motion blur
Frame Blending
Use Float Bit Depth
I've found the work around but would love to save on the time and
disk space it takes to re-export them from Quicktime (and also to understand
what the deal is)
thanks

The option worth trying is "replace asset" rather than deleting and reimporting - the latter guaranteed to lose all the info.
But Encore is not very forgiving when many changes are made. And a "do-over" is often the best option.
There is, of course, no "Encore CC" - just EN CS6. But the fact that you are running Mavericks and having the same sort of Encore errors that occur with various operating systems, and not basic program operating problems, is encouraging for Mavericks' users.

Compressor does not save files?

After searching the Compressor threads I have yet to find the answer to my issue.
Using Final Cut Pro 7.0.1, I imported footage shot on a Canon XL-1, edited it then exported to Compressor 3.5.1 (using the DVD Best Quality settings) to use it in DVD Studio Pro 4.2.2.
The first few times I did it, it worked fine. Then, as I had to fix up the clip and re-export to Compressor, it would run normally, the Inspector doesn't show any mistakes or problems and it takes the average 40mins to an hour to work. But when it's done, the clip is nowhere to be found on the computer and the external drive.
I tried to re-export using 'Send-to/Compressor' and use different names to different folders, even to different drives, I also tried 'Share/DVD', 'Share/other' and 'Share/to Compressor' with no luck.
I get the same problem with different clips i.e.: Motion clips used in FCP to Compressor, 1min-45min-90min as well as 140min clips. I copied the exact file names, ran Compressor then copied the name in Finder to see where the file is going and it's not there.
From the threads I tried changing Targets from its preset to Cluster Storage, resetting the Background Processing for the Batch Monitor, changing priority from HIGH to MEDIUM, deleting the Finder Folder: and restarting the machine: I did those steps one at a time, then retried the export, then moved on to the other steps: I didn't do all of them at once.
I recently Zapped FCS2 from my iMac 24in 2.93GHz AND my MacBook Pro 2.4GHz, because I originally had an academic version, in order to install FCS3. Both machines are running Snow Leopard 10.6.2 with 4GB of RAM.
Sorry about the long explanation but I wanted to cover all the bases without wasting anyones time with troubleshooting already performed. I'll appreciate any help I can get as this project was due last week and I'm running out of excuses to give to the client!
Thanks.

So I have a fix to this problem but not a permanent answer or solution yet. See link to other posting below, thanks.
http://www.kenstone.net/discussions/read.php?3,20506,20506#msg-20506

Seeing a clip in compressor vs actual export file

Similar Messages

Maybe you are looking for