Seeing error message in log of a 2801 running 12.4(7)

%C5510-1-NO_RING_DESCRIPTORS: No more ring descriptors available on slot 0 dsp 1.
version is 12.4(7)
FOund 2 bugs with no work around, CSCsq12931 or CSCsh63265

Hi Johnny,
Seeing the same thing on 12.4(3g) 3845..
MGCP ISDN PRI.
All the other circuits on the box are working fine.
We see a DSP crash error message then the router reloads the dsp and restarts the voice port.
I'm suspecting hardware, but did you get any further with your investigation?
Cheers,
Tim.

Similar Messages

  • Error message in logs on ASR903 with IOS XE 3.9.0

    Hi all,
    I have the following error message in logs on our ASR903 running IOS XE 3.9.0 :
    Jul 10 10:01:34.273 EET: %IOMD_IMFPGA-3-MDIO_WRITE: SIP1: iomd:  An MDIO write has failed for addr: 0 reg: 1f data: 0
    Jul 10 10:03:58.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:11.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:18.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:26.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 11:46:16.627 EET: %IOMD_IMFPGA-3-MDIO_WRITE: SIP1: iomd:  An MDIO write has failed for addr: 0 reg: 1f data: 204
    Any idea what this message could mean and if there is any workaround?
    I found a BUG but it's not well documented :
    CSCuf05039
    Symptom: I2C-WRITE and MDIO_READ error messages are displayed on the Cisco ASR903 router.
    Conditions: This issue occurs after an interface module hard or soft OIR is performed.
    Workaround: There is no workaround.
    show platform    
    Chassis type: ASR-903            
    Slot      Type                State                 Insert time (ago)
    0/0      A900-IMA1X          ok                    5d02h        
    0/1      A900-IMA1X          ok                    5d02h        
    0/2      A900-IMA8S          ok                    5d02h        
    0/3      A900-IMA8S          ok                    5d02h        
    0/4      A900-IMA8S          ok                    5d02h        
    0/5      A900-IMA8S          ok                    5d02h        
    R0        A903-RSP1B-55       ok, active            5d02h        
    R1        A903-RSP1B-55       ok, standby           5d02h        
    F0                            ok, active            5d02h        
    F1                            ok, standby           5d02h        
    P0        A900-PWR550-D       ok                    5d02h        
    P1        A900-PWR550-D       ok                    5d02h        
    P2        A903-FAN            ok                    5d02h        
    Slot      CPLD Version        Firmware Version                       
    R0        11102133            15.3(2r)S                          
    R1        11102133            15.3(2r)S                          
    F0        11102133            15.3(2r)S                          
    F1        11102133            15.3(2r)S           
    show platform diag
    Chassis type: ASR-903            
    Slot: 0, A903-RSP1B-55      
      Running state               : ok
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:03:04 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Sub-slot: 0/0, A900-IMA1X
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/1, A900-IMA1X
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/2, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/3, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:05 (5d02h ago)
      Logical insert detect time  : 00:04:05 (5d02h ago)
    Sub-slot: 0/4, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:10 (5d02h ago)
      Logical insert detect time  : 00:04:10 (5d02h ago)
    Sub-slot: 0/5, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:21 (5d02h ago)
      Logical insert detect time  : 00:04:21 (5d02h ago)
    Slot: 1, A903-RSP1B-55      
      Running state               : unknown
      Internal state              : offline
      Internal operational state  : unknown
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:00:00 (never ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: R0, A903-RSP1B-55      
      Running state               : ok, active
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:01:47 (5d02h ago)
      Became HA Active time       : 00:07:08 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: R1, A903-RSP1B-55      
      Running state               : ok, standby
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:04:12 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: F0,
      Running state               : ok, active
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:02:49 (5d02h ago)
      Hardware ready signal time  : 00:02:41 (5d02h ago)
      Packet ready signal time    : 00:04:42 (5d02h ago)
      Became HA Active time       : 00:05:56 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: F1,
      Running state               : ok, standby
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:04:21 (5d02h ago)
      Hardware ready signal time  : 00:04:20 (5d02h ago)
      Packet ready signal time    : 00:05:56 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: P0, A900-PWR550-D
      State                       : ok
      Physical insert detect time : 00:02:48 (5d02h ago)
    Slot: P1, A900-PWR550-D
      State                       : ok
      Physical insert detect time : 00:02:46 (5d02h ago)
    Slot: P2, A903-FAN
      State                       : ok
      Physical insert detect time : 00:02:47 (5d02h ago)
    Thanks,
    Robert

    Hi Reza,
    Thanks for your reply...yes lldp is enabled...and so far we did:
    - Reapply voice-vlan configuration
    - Disable/Enable LLDP
    - Reboot the Switch
    - Reset the Phones
    ... and only if we do "debug lldp" then it is working...strange

  • LE_SHP_DELIVERY_PROC Error message through Log .

    Hi,
    I'm working on a BADI LE_SHP_DELIVERY_PROC inside the method FILL_DELIVERY_ITEM. I have to show an error message over here. If i passed like MESSAGE e000(zless) WITH text-006 text-007 it is displaying message but it is come out from the layout of the transaction in scope.
    Te be more specific, when the pop up of message comes out and after that the user click on the "Exit" button, the  system should go back on the previous layout of the report to allow the user making another selection.
    I'm using Vl10D transaction.
    Now I'm trying to generate the error message through log by CT_LOG internal table . I have to block the deliveries whichever is creating through this transaction. If for a particular STO there are different loading points then I need to block the deliveries.
    I'm trying to block the current delivery using  IS_LIKP-LIFSK = 'X' and also I need to block the previous delivery IT_XLIKP-LIFSK = 'X'.
    strange thing is happening with STO which has 2 deliveries are getting created (because error msg is not getting tirggered thorugh log),  though I have blocked the deliveries.
    Could you please let me know how can i populate this error message through log as well as I can block the deliveries?
    Thanks in advance,
    Abhijit

    Hi
    To lock the delivery, see Note 198137 - VL10: Customer-specific enhancements / user exits and use this userexits. To populate the log I think that using the structure CT_LOG in the BADI is OK. Check when are called the userexit and BADI.
    I hope this helps you
    Regards
    Eduardo

  • I am trying to run gta iv on my mac.. but i am seeing error messages as soon as it begins.

    i am trying to run gta iv on my mac.. but i am seeing error messages as soon as it begins.

    It must be a poorly ported Mac Version . . . From Rockstar (the ones who ported the program over)
    Question: What are the system requirements for the Mac versions of GTA III, Vice City, and San Andreas?
    Answer: The following list details the minimum requirements and supported specs for GTAIII, Vice City, or San Andreas on the Mac.
    Supported Operating Systems: Mac OS X 10.5.8, Mac OS X 10.6.2 Snow Leopard
    Supported Processors: Intel Core 2 Duo Processor or higher. This game will NOT run on PowerPC (G3/G4/G5) based Mac systems (PowerMac)
    Memory: 1GB RAM
    Hard drive: At least 9GB of free Hard Disk space
    Graphics: ATI X1600, NVIDIA 7300 GT or Intel X3100 integrated graphics chip
    Input: Keyboard and mouse
    Filesizes:
    GTA III: 731.9MB
    Vice City: 1.3GB
    San Andreas: 3.9GB
    The following are known issues and details about unsupported Mac hardware:
    Mac mini: Some Mac Minis have the Intel GMA950 graphics chipset which is NOT supported for select game titles.
    Macbook: Some MacBooks use an Intel X3100 graphics chipset which may require a game to be run under low graphics settings or may prevent the game from running at all. MacBooks with an Intel GMA950 graphics chipset are NOT supported for select game titles.
    Macbook Air: Some MacBooks use an Intel X3100 graphics chipset which may require a game to be run under low graphics settings or may prevent the game from running at all.
    Macbook Pro: No known issues
    iMac: Information coming soon
    Mac Pro: No known issues

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • I get a "Landing - Error" message after logging in

    I get a "Landing - Error" message after logging in Any ideas?

    Hi ,
    Thanks for joining the EE Community.
    Have you tried clearing the cache in your web browser or using a different browser?
    Thanks
    James

  • Getting the error message while logging through work place after upgrade

    Hi,
    C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
    Application not found
    Getting the error message while logging through work place.
    It is urgent
    Thanks,
    Sri.

    After upgrading the Batch file it worked fine.
    Thanks,
    Sri.

  • Problems installing Itunes error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel

    Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message -  Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
    Please Help!!!!!

    That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look

  • I get this error message quite frequently:: (TypeError: attempt to run compile-and-go script on a cleared scope) what does it mean and how do I stop it?

    I get this error message quite frequently:: (TypeError: attempt to run compile-and-go script on a cleared scope) what does it mean and how do I stop it? It doesn't happen always but it is often.

    Ever since the 6.0.2 update - every single day there's been something new going horribly wrong. For the past couples weeks it has been the browser hanging or crashing for no apparent reason and now this error hitting the browser screen over and over a hundred times a minute. I've used firefox since it began and NEVER had any issues previously. This 6.0 upgrade is a downgrade and is making me seriously look at Chrome (never IE - why I switched to firefox), though making the switch will be a pain due to all the apps I rely on and thousands of bookmarks that would need to be transported. Please mozilla fix this because using this browser has suddenly gone from seamless to frustrating pretty much overnight!

  • Error message: 50103 (oxffff3c49) when trying to run VILogger

    I get this error message: 50103 (oxffff3c49) when trying to run VI logger for data received from the NI USB 6008 DAQ. What does this mean and how do I fix it?

    Go through all these threads and post back if that solves your problem or still you stuck up.
    Mathan

  • I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance   " Help pleas

    I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
    I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
    Does anyone have any suggestions, please ?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Error message when logging into financial reporting studio 11.1.1.3

    I receive the following error message when I attempt to login in to financial reporting studio 11.1.1.3:
    "You are not authorized to use this functionality. Please contact your administrator."
    I'm attempting to login with the default "admin" user that appears to have been automatically provisioned with all user rights.
    I see the following error message in FRClient.log (on the client):
    09-14 13:48:40 ERROR ConfigResourceBundle     Could not find fr_configcache.properties file
    The server components (foundation, fr server, essbase) are on a linux machine and fr studio (along with the common foundation files) are installed on a windows machine.
    The fr_configcache.properties file does not exist on the client but it does on the server.
    Edited by: user5326851 on Sep 14, 2010 1:59 PM

    I tried copying the file fr_configcache.properties to c:\hyperion\products\biplus\lib and this got rid of the error message that shows up in FRClient.log but I still receive the same authorization error message in the GUI.

  • Read only user in weblogic throwing error messages in logs

    Hi,
    We have a requirement to create a read only user with monitor access.
    our requirement is to monitor em console using moniotr user, i.e. this user will login to em console, monitor order flow from instances tab by entering order no. and dates, and logout from em console.
    we have done below steps to create monitor user,
    Admin Console->Security Realms >myrealm >Users and Groups-> new
    created user Monitor_User_1 and assigned group as Monitors.
    but whenever this user logs in or searches we are getting below error message:
    <Sep 15, 2013 7:25:21 PM EST> <Warning> <oracle.jps.admin> <BEA-000000> <Access denied. Required roles: Operator, Admin, executing subject: principals=[Monitor_User_1, Monitors]
    java.lang.SecurityException: Access denied. Required roles: Operator, Admin, executing subject: principals=[Monitor_User_1, Monitors]
    we even did below steps:
    With admin access login into EM Console. Select soa_infra, right click mouse -> Security -> Application Roles. On right side, click green arrow and see list of Roles shown. Select the role named SOAMonitors, click on this. And add a Monitor_User_1 to this.
    but we are still getting same error.
    Kindly let us know if we are missing something while creating monitor user and how to get rid of these messages.
    Please note that we are already in Production and our log files are filled with these messages.
    Thanks & Regards,
    Vivek Vishal

    moving this discussion to WebLogic Server - General thread.

  • Error Message in log when creating DBReporting

    Hi Folks,
    After executing script (runtetl.bat) to complete P6 Reporting Database next message appears in log (something seems to be wrong in the project)
    <04.29.2011 11:53:56> transform [INFO] (Progress) - Processed     20.0% of WBS objects
    <04.29.2011 11:54:02> transform [WARN] (Message) - Spread loading thread 2: There was a problem processing a record for the ACTIVITYSPREAD table : NumberFormatException -- For input string: "00 AM"
    Object Identifier: ACTIVITYSPREAD Project CXRS Draft (Glenn Counsell) (EU55 - CXRS GC)
    Primary Key(s): 19797
    <04.29.2011 11:54:02> transform [ERROR] (Message) - Spread loading thread 2: ERROR FOR ACTIVITYSPREAD
    java.lang.NumberFormatException: For input string: "00 AM"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
         at java.lang.Integer.parseInt(Integer.java:458)
         at java.lang.Integer.parseInt(Integer.java:499)
    Similar message appears after referring to calendar
    <04.29.2011 11:56:24> transform [INFO] (Progress) - Processed     100.0% of PROJECTRESOURCE objects
    <04.29.2011 11:56:44> transform [WARN] (Message) - There was a problem processing a record for the CALENDAR table : DAODataAccessFailure -- NumberFormatException -- For input string: "00 AM"
    Object Identifier: CALENDAR Standard
    Primary Key(s): 8473
    <04.29.2011 11:56:44> transform [INFO] (Message) - ERROR FOR CALENDAR
    com.primavera.er.stage.dao.BaseDAO$DAODataAccessFailure: NumberFormatException -- For input string: "00 AM"
         at com.primavera.er.stage.dao.CalendarDAO.retrieveBusinessObject(Unknown Source)
         at com.primavera.er.stage.dao.CalendarDAO.a(Unknown Source)
         at com.primavera.er.stage.dao.CalendarDAO.updateVirtualFieldsForFullLoad(Unknown Source)
         at com.primavera.er.stage.dao.BaseGlobalContextDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.dao.BaseAPIDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$FullApiETLProcessor.a(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$ETLLoadProcessor$1.run(Unknown Source)
    Original Exception:
    java.lang.NumberFormatException: For input string: "00 AM"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
         at java.lang.Integer.parseInt(Integer.java:458)
         at java.lang.Integer.parseInt(Integer.java:499)
         at com.primavera.infr.calendar.CalendarUtil.a(CalendarUt
    and another one referring a wbs
    <04.29.2011 13:39:01> transform [WARN] (Message) - There was a problem processing a record for the ACTIVITY table : DAODataAccessFailure -- NumberFormatException -- For input string: "00 AM"
    Object Identifier: ACTIVITY > FDR CXRS port plug components complete in wbs F in project with id 19797
    Primary Key(s): 411986
    <04.29.2011 13:39:01> transform [INFO] (Message) - ERROR FOR ACTIVITY
    com.primavera.er.stage.dao.BaseDAO$DAODataAccessFailure: NumberFormatException -- For input string: "00 AM"
         at com.primavera.er.stage.dao.ActivityDAO.retrieveBusinessObject(Unknown Source)
         at com.primavera.er.stage.dao.ActivityDAO.retrieveBusinessObject(Unknown Source)
         at com.primavera.er.stage.dao.BaseProjectContextDAO.doUpdateVirtualFieldsPerProjectsInErrorRecoveryMode(Unknown Source)
         at com.primavera.er.stage.dao.BaseProjectContextDAO.updateVirtualFieldsPerProject(Unknown Source)
         at com.primavera.er.stage.dao.BaseProjectContextDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.dao.BaseAPIDAO.updateVirtualFields(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$FullApiETLProcessor.a(Unknown Source)
         at com.primavera.er.stage.client.ETLProcess$ETLLoadProcessor$1.run(Unknown Source)
    Original Exception:
    java.lang.NumberFormatException: For input string: "00 AM"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
         at java.lang.Integer.parseInt(Integer.java:458)
         at java.lang.Integer.parseInt(Integer.java:499)
         at com.primavera.infr.calendar.CalendarUtil.a(CalendarUtil.java:1686)
         at com.primavera.infr.calendar.CalendarUtil.parseCalendarData(CalendarUtil.java:1605)
         at com.primavera.bo.rules.calc.BOCalendarCE.a(BOCalendarCE.java:164)
         at com.primavera.bo.rules.calc.BOCalendarCE.calc_DailyWorkTime(BOCalendarCE.java:58)
    Fortunately these errors does not interrupt ETL processes but do you have any idea about how to fix them?

    Hi
    Is the Server Standalone? If so run this command
    sudo changeip - 10.31.3.135 10.31.3.135 KNWS3135 KNWS3135.ad.ewsad.net
    enter the password when prompted and restart the server.
    If the Server is an Open Directory Master issue this command:
    sudo changeip /LDAP/127.0.0.1 10.31.3.135 10.31.3.135 KNWS3135 KNWS3135.ad.ewsad.net
    enter the password when prompted and restart the server.
    Before you do this can I ask if the DNS Service is being provided by an Active Directory Domain Controller? In other words a Windows Server. If it is and the Windows System Admin has created a DNS entry for your server then make sure there is a Reverse Pointer entry for your server. Make sure the Windows System Admin uses the KNWS3135.ad.esad.net as the FQDN (fully qualified domain name). Enter the AD Server’s IP address as the Primary IP Address in the DNS Server Field on your server and then issue this command:
    host KNWS3135.ad.ewsad.net
    You should see something like this:
    KNWS3135.ad.ewsad.net has address 10.31.3.135
    follow this with:
    host 10.31.3.135
    You should see something like this:
    135.3.31.10.in-addr.arpa domain name pointer KNWS3135.ad.ewsad.net.
    If you are seeing this after you have made sure the Windows System Admin has created the relevant PTR entry for your server then issue the changeip command again:
    sudo changeip -checkhostname
    This time it should report 'the names match there is nothing to change'
    Hope this helps, Tony

  • Need help: error message in Log.

    Hi,
    I got the following error in log file when I open form in LC ES2 workspace. Does anyone solve it before?
    WARN  [com.adobe.document.XMLFormService] ALC-XTG-029-217: [2800] Bad value: 'designer__defaultHyphenation.para.hyphenation' of the 'use' attribute of 'hyphenation' element ''. Default will be used instead.
    Thanks.

    I zeroed in on this same error message today.  I can't tell you exactly what was causing it, but I can tell you exactly the object that was causing the issue.  It was a 1-row, 2 column table.  In one cell was some text that included hyphenation ("in-process").  In another cell was a drop-down menu with only two options defined: pass and fail.
    I noticed that as I was scrolling through the document, as long as this particular table was visible, I would get the same "bad hyphenation" message continuously, line after line, and once the screen threw up 8 lines of this same message at once.  But once I deleted the object, the error no longer appeared, and when I re-created the same table sans hyphen, no error messages.
    I must note that once the error message appeared, when I tried to work with the table-cells, the object no longer functioned as a joined table but instead worked like individual fields.
    My suggestion is to go through your document and look for table cells with hyphenated text, delete them completely and then re-type them without the hyphen included, and see if that takes care of the problem.  That's how I got rid of my error.

Maybe you are looking for