Seeing multiple video tracks at the same time?

I'm using Final Cut Pro 5.1.4 and I have two video tracks on the time line. 2 different angles of the same object. I want to sync the audio and what not correctly. I'm wondering if there is a way to be able to do like a "split screen" on the Canvas so I can see video track 1 on the left and video track 2 on the right (or vice versa)?? If so..help! lol, thanks!
GC

You have a few options available to you.
1) You could use FCP's built in Multiclip functionality
2) You could set the Playhead Sync to Gang
3) You could Scale and Center controls in the clip's motion properties to temporarily place the fooatge side by side whilst you edit.
Check your manual for details on these options, then post back.
Best
Andy

Similar Messages

Why cant I see BOTH video tracks at the same time?

I read all the manuals,I swear.
I make film collage and want to do multiple layer exposures of different clips.
So far I just have two video tracks-
Why cant I see BOTH video tracks at the same time,I mean each track will create another layer,or exposure that will both play back viewable simultaneously right ?Or would that be considered "layering"?
Does this have anything to do with the source vs. destination thing ?

FCE plays back video tracks in a "top-down" manner: that is what's on track 3 obscures what's on track 2 which obscures what's on track 1. You can control scale, position and opacity of each clip on each track so that you can get the layering you seem to be after.

Preview multiple video tracks at the same time.

This may have already been covered at some point on here but I was unable to find it. Please forgive me if it has.
I'm editing a 2 camera presentation for a company. I've laid both cameras in the sequence. Camera 1 is on V1 and Cam 2 on V2. They are in sync and ready to go. My questions is, "Can I preview or monitor both tracks at the same time as if I was switching this live?" I want to be able to preview cam 1 at the same time cam 2 is playing on the canvas so I know when to cut V2 and switch to V1. Is this possible to do in FCP? Thanks in advance for any help you can give me.
Thanks!
Mike

It's not your only option, though you could do that if you wish.
You can still finish the edit with multiclip...(provided your clips are still in sync)
With your playhead at your last cut point, option-click on V1 to activate it's track selector as the only one active, then hit the 'f' key (this will load clip one in the viewer at that point in time). Set an inpoint on clip 1, the do the same for V2 (clip 2)
Next select both clips in the browser and hit control-click / Make Multiclip. Choose 'Synchronize using: In Points', click ok.
Now dbl-click the new multiclip in the browser, make V3 active and hit F-10 (overwrites the multiclip onto V3)Next, dbl-click the V3 multiclip in the timeline, go to the top/center button of the viewer and set the Sync to 'Open'. Then, single-click in an open space in the timeline, place your playhead at the head of the new V3 multiclip and hit the space bar. You should see both clips rolling in sync in the viewer.
Check the manual for Multiclip button bars and any additional settings like activating 'Multiclip Playback'.
K
PS - you might want to duplicate your working timeline to test this procedure, then you can always delete the old clips and drop your V3 multiclip on to V1 to finish the edit.

Is there a way to see or play two video tracks at the same time?

I have video shot using two cameras at the same event. If I take the video and put it in a sequence, say video1 and video2, how can I watch both tracks at the same time so I can edit them? I tried using multi-camera monitor and have that show video1, while watching video2 in the right hand panel, but it doesn't work very well. By that, I mean the multi-camera monitor does not play at the same time. Instead, it stops, then when I play the other monitor it is still until I stop the other one. Then, it "catches up". If I play the multi-monitor, the other one is still until I stop the multi-cam monitor. So, anybody have a better solution that I can use where they both play at the same time?
BTW, my hardware is brand new and I have a 6-core i7-3930K processor with 16 GB of memory, so I don't believe the problem is with my hardware not being enough to run PPro 5.0 correctly.

"adobe multicam tutorial"
http://tv.adobe.com/watch/short-and-suite/multicam-sync-and-editing/

Multiple Inst tracks recorded @ the same time

I AM TRYIN TO RECORD TWO INST TRACKS AT THE SAME TIME USING TWO SEPERATE MIDI DEVICES. IS THIS POSSIBLE, AND IF SO HOW IS IT DONE ?
THANKYOU.

Ok, let's try step-by-step.
I'm assuming you already have in the arrange window two instrument tracks for Inst1 and Inst2 such that you can play/record each instrument individually.
Now proceed as follows
1. Open the environment and choose the Audio layer. From the New menu choose the Channel Splitter. It appears on the window. Make sure that its Icon box is checked in the parameter box. Then draw cables from output1 to Inst1 and output2 to Inst2.
2. Open the arrange window. Create a new track. Click and hold the track name, from the popup menu select (Channel Splitter). Voila, now we have the channel splitter track!
3. Make sure the channel splitter track is selected.
4. Make sure your midi devices are sending on midi channels 1 and 2.
Now you should be able to play and record both devices at the same time. The recorded notes will first appear on the channel splitter track. After recording select the region and apply 'Demix by Event Channel'. This will create two new tracks containing the recorded notes of each instrument. For playback drag both regions to the original instrument tracks.
Good luck! Feel free to ask if something doesn't work as expected.

Multiple video tracks with the same audio track

How do I get DVDSP to play the same audio track on 3 different video tracks without having to repeat the audio on each of the 3 video trax?
Seems simple, but I can't find an easy way to do it.
Anybody got any ideas?

Yes they are all one continuous stream with the same GOP structure and everything. I had to export them as QT movies from FCP to get them all the same. I only exported the video though becuase the audio was going to be the same for all the tracks, & it was already done as AC3 through Compressor. Which brings up an interesting question; why does DVDSP convert the AC3 audio to .aiff which is a much larger format?
I'm trying to go back and look at the encoding log from DVDSP to see what error it gave.
It doesn't give the error in the log since I had shut down my computer last night, so I guess I'll have to try the build again and see what error it gives.
I'm looking at the parsing files and .m2v files that DVDSP did during the build, and it parsed all 3 angles, and finished the .m2v file of the medium shot, including 6 minutes past the point I told DVDSP to stop it. (When exporting the QT movie from FCP, I had forgotton and encoded the whole 2:30:00 show instead of the 1st 1/2 of 1:16:47:15, and then just adjusted the end of the clip in DVDSP).
The wide shot and Close up .m2v files, and the audio .aiff file were in the folder, but have nothing in them. The Video_TS folder and Audio_TS folder are also there, but with nothing in them, so whatever happened, seems to have happened in the medium shot encoding process.
I'm pretty much over this multi-angle thing, and I'm going to start working on an edited version of this today because all I have to do is make the cuts between cameras, since the audio is already mixed. However, if you have any other ideas, please let me know.

Can't have multiple videos open at the same time?

I often start buffering another video when one is finished, so I usually tend to have 3-4 videos open at times. However, about a week ago, the adobe flash plugin would crash. So, I followed this guide:
http://support.mozilla.com/en-US/kb/The+Adobe+Flash+plugin+has+crashed?style_mode=inproduct
I also disabled the plugin container. Now, the plugin stops crashing, but firefox stops responding whenever I open a third video. Then, firefox itself crashes. Please help!
== This happened ==
Every time Firefox opened
== About a week ago.

The same thing just happened when I opened a second video instead of a third one.

Multiple Libraries for Video running at the same time on one PC

Hi Everyone -
I want to clarify this is for VIDEO files, not music for my 6 ATV's on the network.
Problem: I have well over 1000 VIDEOS in my iTunes Library, and I am wanting to have multiple libraries availible at the same time; not just whichever the computer has open.
We have several atv's on the network and I would like to take my video organization one step further; instead of scrolling forever in the atv menus for the video you want; I could make several libraries all availible at the same time.
Such as:
Kids Library
Workout Library
Parents Library
etc
This in turn would shrink the primary library and have less videos to sort by. I know how to create the Libraries, I just dont know how to have them all running at the same time.
Infastructure:
Windows 7 Ultimate with Drobo B800FS (16TB of storage) all connected to Cisco 3660 Gig switch with multiple atv's hardwired back.

iTunes can only open one library at a time. If you have multiple computers, or virtual machines, each could be serving a different library.
tt2

How do I layer 2 video clips in the same time space/ playing side by side at the same time

I wish to add 2 views of the same subject side by side and playing at the same time. Is this A possible and B if so how do I add the second video clip into the same time space

aggro
What version of Premiere Elements are you using and on what computer operating system is it running?
This sounds like a split screen effect to me.
If so, one view on Video 1 and the other directly above that is the other view on Video 2.
Then crop each so that each occupies 1/2 the Edit area monitor screen.
(generalized since I do not know your program version, see effects Transform/Crop).
I wrote the following in 2011 for a Premiere Elements 8 user in another forum
Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
Video ONE on video track 1.
Video TWO on video track 2, directly above Video ONE.
Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
You may or may not need the "flip" part of the effect.
Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
Thanks.
ATR

How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

How can I record an Audio Instrument, and listen to a reference track at the same time?

Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

scottiewade wrote:
Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
Hi
Wrong..
To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
Make sure that you have turned off Group Clutch (this disables all Groups)
Maybe this will help
http://support.apple.com/kb/VI248
CCT

Help with recording 2 tracks at the same time

Basically I recently purchased an Audio Interface (BEHRINGER XENYX Q802 USB) and I'm having trouble recording multiple tracks at the same time while using it.
When I set up 2 MONO tracks in my DAW (one using input 1, the other using input 2) all that happens is that I get a recording of one mic over both tracks in my DAW.
This is probably a beginner post and I have looked it up on YouTube etc. but it just doesn't work for me... Maybe it has something to do with my Interface, but any help will be much appreciated.

Hi Pancenter,
Unfortunately I don't have the manual as I purchased it from a friend who failed to provide me with the Manual.
But thank you for answering as this was what I needed to do.
Many thanks
Olie.

Multiple running queries at the same time

Hi!
I looked around (and RTM) for this but didn't find anything, so I'm asking here.
I have quite a few long running queries (data loading and such things, warehousing stuff), and I need to be able to run multiple queries/statements at the same time. In TOAD I can do this, start a procedure and while it is running I can do SQL statements in another session tab (it supports threaded sessions - it starts queries in their own background thread/session).
When I start a long running procedure or query in SQL Developer I can not do anything until the procedure execution finishes. Is there any way (setting/preference) to enable SQL Developer to be able to run multiple queries at the same time?
I really would like to move away from TOAD, but this is a major showstopper for me.
Thanx for any tips.
Alex

Hi!
This post is going to be a little longer, but I have to clarify things out.
I did not mean to throw any wild accusations, because I did my fair share of RTFM and searching the help. I can tell you that if you put any of these in the help search box:
session
non shared
non-shared
connection
concurrent <- I guess this one should yeld something
multiple
spawn
you won't find anything usefull, the article that comes closest, is this:
"Sharing of Connections
By default, each connection in SQL Developer is shared when possible. For example, if you open a table in the Connections navigator and two SQL Worksheets using the same connection, all three panes use one shared connection to the database. In this example, a commit operation in one SQL Worksheet commits across all three panes. If you want a dedicated session, you must duplicate your connection and give it another name. Sessions are shared by name, not connection information, so this new connection will be kept separate from the original."
It does not mention any spawning of non-shared connections from the current one, nor it does mention using a accelerator key combo. But since there could be written something about it, I guess you could call it a documentation bug, because it does not provide any clue to this functionality. The help is definitely of no help in this case. As you can see, I do not throw accusations without trying to find out something first. I guess if someone is not as deep into SQL Developer as you are, there is no way for him/her to know this.
OK, I tried your suggestion, and (sadly) it does not work as I suppose it should.
Here's what I did:
- start a new connection, and enter the following code in SQL Worksheet:
declare
j number;
begin
for i in 1..1000000
LOOP
j := sin(i);
end LOOP;
end;
As you can see, it doesn't do much besides holding the connection busy for a while when executed.
- start a new non-shared connection from the first one using CTRL-SHIFT-N (as you suggested) and put the following statement in the new SQL Worksheet (with "__1" appended to connection name)
select sysdate from dual;
- go to the first SQL Worksheet and execute the procedure
- while the procedure is executing, go to the second SQL Worksheet and hit F9.
The sysdate is returned as soon as the first SQL Worksheet finishes and not any sooner. It may run in separate session, but the result is not returned before the other session is finished doing what it is doing. I guess the correct behaviour would be to return the sysdate immediately.
I verified this behaviour repeating it 3 times starting with a new instance of SQL Developer, each time connecting to another schema and spawning the new non-shared session. The database used was Oracle 10.2.0.3 EE on RHEL 4 UPD3.
The concurrent execution lacks concurrency. The statements might be executed concurently on the database (i did not went the extra mile to verfiy this), but the returning of results is just not independent of other sessions. To the end user this is as much concurrent as it is serial execution.
I hope developers get this issue straightened out soon, as I said, I'd love to move away from Toad, but I'll have to wait until they fix this out.
Is there anything else that can be done to make it behave correctly?
Kind regards
Alex

How do I view multiple inbox folders at the same time in Mail?

I want to configure Mail to show me multiple inbox folders at the same time. I want to be able to split the screen and show in the top section unread messages, then messages I've marked with label A, then messsges I've marked with label B, then everything else in my inbox (like using the multiple inbox feature in Gmail). Is this possible?

Just figured it out - I can select multiple messages as you suggested when I am not in full screen mode.
So once I come out of full screen mode - then the multiple windows open.
QED

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

Seeing multiple video tracks at the same time?

Similar Messages

Maybe you are looking for