Seeking a fingerprint sensor driver for hp dv5-1170el windows 8 64 bit!

Hello!
I upgraded an HP dv5-1170el in windows 8 pro 64bit!
I can not find a compatible driver for the detector footprints!
From what we found on the net drovebbe be the model Validity VFS101, correct me if I'm wrong!
I tried to install the driver for windows 7 64 bit fails!
I ask you kindly to help me solve this problem! Thank you very much!

Hello aki380. I understand you're trying to locate some Windows 8 drivers.
Unfortunately, your notebook does not have any Windows 8 drivers available for download.
Did you try to install the Windows 7 driver in compatibility mode or just regularly?
Also, is the device listed in Device Manager?
I'll keep an eye out for your response; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit

Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit? Help!!!!

hi there,
Most of the A200 series makes use of this video card chipset.
[Intel(R) Graphics Media Accelerator Drive X3100|http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml&sliceId=&dialogID=57594450&stateId=1%200%20 57598302]
Hope this will help :)

Windows 7 Driver for HP Deskjet 1280 Windows 7 32 bit

i have a hp deskjet 1280 and have recently upgraded to windows 7 but can't find driver for it. I am on Windows 7 Home Premium 32 bit. Help would be much appreciated
This question was solved.
View Solution.

Hi,
Hope this helps:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=439174&p...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

(T530) Driver for port replicator M01060 windows 7 64 bit

Hi.
Where can I download a driver for the M01060 port replicator.
When i attach it to the usb port, windows starts installing drivers, but reports errors with driver for ethernet and video.
Keyboard and mouse works ok when attached to the port replicator.
Best regards,
Erik

Hi Erik,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with Driver for port replicator M01060 on your ThinkPad T530.
Please check with the drivers from the below link and install it, also suggest you to go through the readme file before installing the application.
http://support.lenovo.com/us/en/documents/migr-4tpjf4
At the bottom of page, Lenovo USB 2.0 Port Replicator with Digital Video
(0A33942 - U.S., Canada Power Adapter) Driver (.exe)
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

(SL510) Driver for port replicator M01060 windows 7 64 bit

My monitor will not work with a M01060, when used with my SL510. OS is Windows 7, 64 bit.
I download the 2.0 drivers listed on this forum, but that did not fix the issue. The device manager lists USB Ethernet and USB Video in "Other Devices." How can we get the screen viewable?
Thanks!

Hi Erik,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with Driver for port replicator M01060 on your ThinkPad T530.
Please check with the drivers from the below link and install it, also suggest you to go through the readme file before installing the application.
http://support.lenovo.com/us/en/documents/migr-4tpjf4
At the bottom of page, Lenovo USB 2.0 Port Replicator with Digital Video
(0A33942 - U.S., Canada Power Adapter) Driver (.exe)
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Intel graphics driver for compaq 15-s008TU windows 7 64 bit

Hi,
i have tried install the graphics drivers which are present in hp website ( intel high defination graphics driver version 10.18.10.3408 & intel high defination graphics driver version 10.18.10.3431 ) but it is not supported in my system.could you please provide the download link for graphics driver?thanks in advance.
Model name : Compaq 15-s008TU
OS : Windows 7 ultimate 64 bit

Hi:
Try the graphics driver directly from Intel...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24245

How do i format an external hard drive for use on both windows and mac book air?

how do i format an external hard drive for use on both windows pc and mac book air?

Use exFAT on the PC.
(71374)

I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300          "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp        = "MF Toolbox Ver4.9"
CNCRFN           = "MF8300"
CNC.MDL          = "Canon MF8300"
CNC.SRS          = "Canon MF8300 Series"
CNC.DeviceDesc   = "Canon MF8300"
CNC.SPInfo       = "Canon MF8300 Scanner"
CNC.TwainDS      = "Canon MF8300 Series"
CNC.ColorGear    = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName     = "WIA Canon MF8300 Series"
greeting
Sixten

How I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone.

TS3212 We can't download iTunes for our computers! (Windows 7 64-bit)

Hi, I'd welcome some helpful advice for downloading iTunes for a computer with Windows 7 64 bit operating system. I have older computers with Windows Vista 32 bit systems and have no trouble either downloading or installing iTunes to them. However with two computers using Windows 7 64 bit systems I click on download iTunes then a screen comes up and tells me thanks for downloading iTunes, eventhough nothing has downloaded! No dialogue boxes come up and I don't have pop up blockers enabled on my browser (Internet Explorer} or on my antivirus! So I can't even download the blasted thing let alone install it! thank you for your consideration.

Thanks for the advice, however I had already tried using Firefox originally and then Internet Explorer but the result was still the same.

Sound works for all programs in Windows 7 (64-bit) except iTunes (64-bit) which stopped working after months of working fine.

Sound works fine for all programs on Windows 7 (64-bit) except recently 64-bit iTunes just stopped working. I believe the sound stopped right after downloading the 10.5.1.42 version of iTunes.

Sir,
I had the same problem with itunes 10.5 with creative labs sound card. The only way I could solve it was to use the built in sound on my video card. But needless to say I have a very high end video card, I have the NVIDIA GTX 580. And after I used the sound on my video card everything worked great.

Fingerprint reader driver for T42 running vista

where can I download the fingerprint driver for the t42 running vista?, also this is a duel booted laptop I also have xp the error I get with the fingerprint reader in xp is "too Short" does anyone have any suggestions on resolving the too short error?
Thanks, Durrell

Try this one and let us know whether it worked:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70064
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Windows 8.1 Fingerprint Sensor Driver not working - Fixed my issue

When I upgraded to Win 8.1 the finger print sensor wasn't working. I had the correct drivers installed. What fixed the issue was upgrading the hardware driver in the Device Manager program, under Biometrics. Highlight the Validity listing, choose upgrade driver, choose selet from a list, choose the latest driver which will have a higher number obviously. My fingerprint sensor is now working!

Unfortunately HP couldn't figure it out when I called them. They installed the same drivers I already tried several times. After I hung up, I figured to update the actual Validity Driver under Biometrics in the Device Manager section. That fixed my issue. I think HP techs need to be trained a bit more thoroughly. So Kudos goes to me.

Seeking PLDS DS-8A3S Driver for NW65

I'm attempting to install NetWare 6.5 SP6 or NetWare 6.5 SP8 on a new-model Dell server: PowerEdge R610. The server has a SATA-attached DVD drive, a Philips and Lite-On Digital Storage DVD+/-RW DS-8A3S.
I can start the installation process by booting my install CD--it appears that CDDVD.NSS is handling the DVD drive at this point--but when the installation routine gets to the screen in which the storage device drivers install, it displays the message, "No CD-ROM device was detected in this system. Load the appropriate driver (HAM)."
I haven't been able to find a driver on Dell's site. They're in the process of phasing out NetWare, unfortunately.
So, I'm seeking the appropriate driver or a decent workaround. So far, my workaround is to copy the install CDs to the C: drive and run the install from there. The downside to this, however, is that the DVD drive still won't work after the installation is completed.
Thanks.

Originally Posted by Hspeirs
Larry,
> I'm attempting to install NetWare 6.5 SP6 or NetWare 6.5 SP8 on a
> new-model Dell server: PowerEdge R610. The server has a SATA-attached
> DVD drive, a Philips and Lite-On Digital Storage DVD+/-RW DS-8A3S.
This was posted in another thread today - I believe it requires SP8
overlay install.
The SATA driver for the optical drive may not be present to complete
the installation.
Solution: Perform the following steps to load the Novell SATA CD/DVD
driver for installation:
1. Select "Manual" installation type.
2. At the storage section (ie. IDECD,SCSIHD) insert and select the
Novell "SATACD.CDM" file. The remainder of the installation should
complete successfully.
Hamish
Run multi-processor NetWare VM's with vmBoost
http://www.caledonia.net
I am installing Netware 6.5 sp8 on a Dell r710. I'm getting this error even if I choose the SATACD.CDM driver. Any ideas?

Mark_Lenovo, is there going to be fingerprint sw/driver for Win 10?

How does that work? You have to enter a pin each time you want to use the FP scanner? --That can't be right...

Skoop wrote:
Another issue: Pre-desktop authorization is enabled in BIOS, but FP scanner doesn't light up upon cold boot. Have to manually enter power on and HD passwords.
This should be working. What version of the driver is installed? Look in Device Manager -> Biometric Devices -> Synaptics FP Sensors. Then click on the Driver tab. You need 4.5.3xx or later. If instead you still have 4.5.2xx, then you need to upgrade it. Click on the Update Driver button and then click on Search Automatically. Windows should automatically download and install the 4.5.3xx driver that you need.
To get preboot authentication working, you may need to remove your existing fingerprints and then re-enroll them using Windows Hello in the Settings -> Accounts -> Sign-in Options screen.

FingerPrint Sensor/Software not working right with Windows XP Pro SP3

Hi All,
I have a 3 month old Satellite Pro S300-S2504 (2.4 GHz CPU, 3 GB RAM, Bluetooth, firewire - was a custom build with most of the options I could get). The O/S installed was/is Vista Business. It came with a dowgrade XP Pro SP3 disc as well.
I bought a second hard drive - swapped it with the original and installed Windows XP Pro on it - having grown tired of Vista. I don't intend to keep both O/S's - but I didn't want to mess with what I had until I got XP working - and that's the reason I got the second hard drive for XP. Anyway, XP Pro is installed and working except the fingerprint sensor. As soon as I booted for the first time - with nothing but the factory everything installed, it prompted me to register fingers for the sensor. I tried but I got a database not found error followed by a sensor not working error. I got the latest updates for the fingerprint sensor, removed what I had - rebooted and installed the newer program - I got the same error. I then uninstalled the program again, went through the registry and removed all entries whose key had TrueSuite in it, rebooted and installed the latest version again - rebooted - and got the same errors. Looking in Device Manager, the sensor is working fine but once I try to register a finger and it fails, I then look in Device Manager and the sensor has a yellow error indicator. I used System Restore to go back to the original configuration and then tried the Fingerprint drivers/patches for Vista and for Windows 7. All of them installed but I got the same database not found error followed by the fingerprint sensor not working error.
I did end the program, then using Task Manager, I ran the Fingerprint utility as administrator - still got the same errors. I've completely reinstalled from the Windows XP restore CD four times trying to solve this and I can't get the fingerprint reader to register fingerprints - I always get that error.
I have a lot of graphic editing (movies) software as well as file conversion programs and a very stable version of Roxio Easy Media Creator that all works fine in Windows XP - but it all has problems running in Vista and I'm tired of the bugs that Vista seems have - and I want to use Windows XP Pro. I will try any suggestions. The fingerprint sensor and software works reliably in Vista. I even updated it and that went fine. I suspect there's a problem with the XP version of the software for my computer. I did notice that Toshiba doesn't sell the this model series with XP downgrade as an option anymore. I wonder if this is one of the reasons.
Anyway - I would very much appreciate help with this. Any ideas at all are welcome.
Thanks,
Dennis

Satellite Pro M10-S405
..a clean Win XP Pro install and it still doesnt work.There is a Win Xp key on the bottom of the laptop, but I cant seem to use it.
The Product Key that comes with the computer is useless to activate a retail installation. You would need to purchase a new one or convice Microsoft that an old one is no longer in use.
In the device manager it shows
Ethernet Controller
Multimedia Audio Controller
Network Controller
Unknown Device needing Drivers. I have searched and downloaded drivers and installed them but it still doest work.
Get the drivers from here.
Install the chipset utility first, followed by the display driver. Be sure to install the common modules prior to any Toshiba utilities, including power management.
-Jerry

Seeking a fingerprint sensor driver for hp dv5-1170el windows 8 64 bit!

Similar Messages

Maybe you are looking for