Seeking a LabView consultant in Richland, WA

We are a small company with an automated process in Richland, WA. The control system software has been written and we are now looking for a local support person to help with occasional troubleshooting, modification, and support tasks. The system consists of an embedded program running in a 9074 and LabVIEW running as an HMI.
Please advise if interested, work to possibly begin in September/October timeframe.

Hello,
We're an alliance member and a system integrator and we have certified LV developers. Can you send us details about the project and your full contact information.
Thank you,
Rabei AL-Hamdan
[email protected]
Technology Integration
Amman - Jordan
Tel.: (+962) 6 464 4571/2
Attachments:
Company Profile.pdf ‏3764 KB

Similar Messages

Seeks the LabVIEW part time job ,Beijing China (6 years exp)

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

The appropriate message board for this is LabVIEW Developers Seeking Employment

Seeks the LabVIEW part time job ,Beijing China

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

The appropriate message board for this is LabVIEW Developers Seeking Employment

Small Company looking for a LabVIEW consultant (remote consultant welcome)

Hello,
We are a small company looking for a LabVIEW consultant. This is about a 3-6 month project. The consultant must be familiar with NI hardware product as well. Please send me your resume/CV. In your email please state the following: years of experience, educational background, your hourly requirements, your location, and the amount of time you will be able to provide.
Please removes spaces on the email below.
int e g r at e d devi c e s @ yah oo. c o m

I'm not sure if this is frequent on the NI forums, since I believe NI validates user information prior to issuing an account that allows them to post to the forum. But usernames (like mine) don't provide immediate identifications; you have to ask for it.
Apparently Job Scams have become more frequent. See the list of tips on the following site, (I have no relationship with this site. It just came up in a google search).
http://www.identityhawk.com/IdentityProtectionTips-inHonorof-LaborDay
5 Steps to Take Before Applying for a Job
1. Email - the company to get information about the job. Do not provide any personal information to them upfront.
2. Phone - speak to an official at the company and ask about the job. Be assured that it is legitimate.
3. Meet - at the company site to assure it is a real company. If you cannot meet, and the company is in your town, drive by to see the facility, (possibly using google maps to view the site).
4. Verify - see if you can find a person who has worked at the company or call a Chamber of Commerce of Better Business Bureau to assure the legitimacy of the company. Search online for legitimate information about the company, search online for any complaints of non-legitimacy. State Entity sites typically have the name of the company and how long they have been in business.
5. Apply - once you are assured the company is legitimate, it is safe to apply; but you should still not supply highly personal information like bank accounts until you are officially hired.

LabVIEW consultant required in Ballarat, Australia

I have an automotive test machine running a LabVIEW interface, controlled by a NI acquisition card.
It would be polite to describe the machine as "legacy". The entire machine is dinosaur era. The NI / LabVIEW upgrade was done in-house by somebody long since departed. The hardware belongs in a museum and the control PC has been running on borrowed time for at least a decade.
I need an experienced LabVIEW consultant to bring the machine back up to date; replace hardware with current supported models, and update software to suit.
Any local (ie Melbourne) LabVIEW contractors should drop me a line at [email protected], or call me on 03 5327 0318 to discuss.
Thanks,
Tim

Dear Sir,
I am working as application engineer and completed my M.Tech. Project (for GM and ISRO) from IIT Kanpur in Smart Systems Lab, Mechanical Engineering Dept. IIT Kanpur. I have 1.5 year of job Experience as junior R&D engineer. I have profound experience in developing microcontroller and LabView based system and my research work reflects it.
DAQ and software interfaced while doing projects:
LabVIEW- 7.1- 8.0
Interface of various sensor like RTD, PVDF, Bi-morph, Theromcouples, LVDT, Strain gauge and Optical Encoders through DAQ.
Motion Control : Servo and Stepper.
DSP- Speedy 33 and DSp module
Basic of DSC and Image IMAQ.
You can mail me for further details at [email protected] May I can justify your requirements.
Waiting in anticipation.
Thanking you,
Yours Truly,
Om Prakash Patel.
Message Edited by ni_op on 09-18-2006 08:58 AM

Labview Consultant Position in North New Jersey

Our client is a large stable company that designs and builds Open ATE systems for all major test industries. Aavalar Consulting has been engaged to provide a Software Engineer.
A job description follows:
Title:   Labview Developer (Test Applications)
Work Location:       Ramsey, NJ Area
Length of contract: 6 months
Is Telecommuting possible?    No
Work environment:   Cube in a suburban office building with a nice atmosphere and great parking.
Who does this position will report to?:   Vice President Software
What is the start date of the contract?:   ASAP
What is the size of department?:     <40
What projects will the engineer be involved with?:
Automated Instrument Control and Automated test of new hardware components
Software development in Labview and Test Stand to automate a Burn-In station.
Responsibilities:
Responsible for the creation of software to enable test instrumentation to command and receive data from systems to be tested. Will assume overall responsibility for the software on assigned projects for various Optical, Telecom, Automotive, Wireless and Aerospace products. Individual will develop and present software presentations to customers.
Role with the group: Developer - Individual Contributor - No management
Required Skills:
Bachelors degree in EE, CE, or CS or equivalent education with 2-5 years experience in related field. Experience in development of test system software using Labview, Lab Windows/CVI or Visual Basic required.
Desired Skills:
Instrumentation automation
System Integration
Documentation
>     Experience developing instrument control routines with Labview
>     Experience with Test Stand
>     Software Documentation experience
Selling point of the job:
State of the art technology and a good group of people.
Work Hours and Schedule:
Standard business hours with flexibility after a level of trust is established
Is overtime paid, and is it at straight time? Straight Time or Salary Position
Dress Code:   Casual to Business Casual
Who is involved in the interview process?     Vice President of Software, and the President
Target Rate: Open
Sean Handforth
Email: [email protected]
Aavalar Consulting, Inc.
Swedesford Corporate Center
649 Swedesford Road
Malvern, PA 19355
www.aavalar.com
Phone: 610.889.9990 x12
Toll Free: 877-4-AAVALAR
Fax: 610.889.9995
Aavalar provides contract software developers, hardware engineers, systems administrators, database administrators/architects, etc.for Engineering as well as IT environments. Retained and contingency search, as well as recruitment process consulting is also provided for clients who are building in-house technical staff.

I am sending my updated resume. Please find here with the attachment. I would like to apply for the position of Labview Developer
May I take this opportunity to present my interest and desire to serve your renowned organization with reference to above.
The detail of my educational qualifications, work experience and other activities are given in the enclosed resume. I shall be an asset if I
am given an opportunity to work in your organization.
i have 2 years of experince in labview
Attachments:
sairam.doc ‏36 KB

Seeking a LabVIEW Development Job in South India

Looking forward to work for a reputed organization.
Over 2 + years of experience in design and development of customized PC based Embedded software’s, automation
tool for audio and vision validation, Audio and Telematics Validation Test Cases design and Automation,Data
acquisition and Control Systems using LABVIEW 8.0/8.2/8.5 and NI DAQ Cards in the automotive and consumer
electronics industries.
Experience with GPIB Interface, VISA and Serial I/O Interface, Call Library Function nodes to interface with
third party and custom Dlls, Image processing, Software Triggering, Analysis of acquired data with mathematical
algorithms, Controlling and Monitoring applications, UART communication programming on PC side programming.
Experience in developing customized applications in areas like VB, C, and Java with good customer interaction.
Experience automating vision Validation tests with customized Test Sequences.
Ability to maintain large LabVIEW applications (> 250 Sub-VI's)
Ability to Write programs and applications to support our measurement and control hardware.
Presently working in an MNC Company.
Resume would be sent on request.

Hi Suneel,
Kindly post this in the Job Seeking forums ,
So that you get better prospects .
This is for people willing to hire.
Regards,
Sundar.

Seeking for labview CLAD jobs

Hi,
I'm Anurag Srivastava pursuing my final yr B.E. (Electrical n Electronic) in India....I've cleared
LabVIEW CLAD certification exam....My areas of interest are Automation,Virtual
Instrumentation .....Kindly
do help me in seeking
jobs where LabVIEW
fresh engineers(CLAD
Certified) are of
demand...

Hi Anurag,
Kindly mail your resume at
[email protected]
Regards,
Amit Garg

LabView consultant

I have need for a 1-3 day consultant job in Indianapolis, Indiana. We are working on a noninvasive blood pressure device with LabView as the software program. Some code has been written, but the technician now engaged may not be capable of finishing. I need a LabView expert with experince in control sequences and high speed date acquisiton and processing. Please send me your resume, salary requirements and availability.
R. Lew

Hello,
My name is Robert Bohannon and I reside in the Denver, CO area. I’ve attached my resume for your review. I have been doing automated test system development for over 15 years and have been an independent consultant for over 5 years. I’m writing you to express my interest in your job posting in the LabView Job Openings Forum. I am currently looking for contract opportunities and I believe that my services could be of great value to you.
Please review my resume and if you find any experience of mine that may potentially fit your job requirements, please let me know. I will provide references upon request.
Thank you for your time.
Robert Bohannon
Attachments:
resume.2006.05.21.pdf ‏315 KB

LabVIEW Consultant for hire in Denver/Boulder

Denver area consulting firm for all of your Data Acquisition, Control, Real Time National Instruments needs. Competitive pricing, certified LabVIEW developers waiting for your most challenging projects.
www.SureWorksLLc.com

Hello Sir/ Madam,
I am interested in doing work at Sankalp Semiconductor as a LabVIEW engineer
Attached my Resume..!!
Attachments:
abhinav.doc ‏42 KB

LabVIEW Consulting

Hello,
Labcode is a software consulting company. Our main services include designing, development, optimizing and problem solving by using LabVIEW and/or Teststand. Our Designers are well trained (by National Instruments) and have been designing large LabVIEW projects for years. We are using Coding Style Guidelines and Code Reviews to obtain best possible code quality and performance to our customers!
Best regards,
Labcode
info(at)labcode.fi
www.labcode.fi

Dear Sir, I am sure you are looking for somebody, who is a resident of USA and having experience in LabView Programming. I am attaching herewith my resume, should you find in it a suitable candidate for your project I will be glade to share my experience, knowledge and experience which I have acquired since last 12 years. I statarted LabView Programming with ver 2.00 for Mac and I have programmed my last programs in ver 7.1 for Windows . Most of my work was interfacing testing and measuring instruments (both mechanical and electrical) with PC and using LabView for data acquisition, analysis and presentation. I do have an exposure to Allen Bradly PLC. Thanking you and hoping to have an encouraging response.- Sincerely Arvind Engineer
Attachments:
AMERESUME.doc ‏29 KB

BD Biosciences Seeking a Labview Programmer/Test Engineer

BD Biosciences located in San Jose, CA is currently seeking a Sr. Test Engineer to join our exciting and growing team.
About BD: BD Biosciences, a segment of BD, is one of the world’s leading businesses focused on bringing innovative research and clinical tools to life scientists and clinicians. Principal product lines include fluorescence activated cell sorters and analyzers; cell imaging systems; monoclonal antibodies and kits; research reagent systems; tools to aid in drug discovery and growing tissue and cells; and diagnostic assays. Its customers are involved in basic research, the discovery and development of drugs and vaccines, clinical trials, diagnostic testing and disease management. This diverse customer base includes academic and government institutions, pharmaceutical and biotech companies, and clinical laboratories.
The successful candidate will have hands on experience in the development of automated test solutions for PCBs and system level testing. The ideal candidate will be proficient in Labview programming. This engineer will be an integral part of the new product design teams and will be responsible for creating test that can deployed into the manufacturing environment.
The incumbent will be responsible for creating automated custom test fixtures utilizing custom or off the shelf hardware and the Labview software application as well as the testing of fixture development to include PCBs and system level testing for a complex medical analysis instrument. Responsibilities will also include planning, developing, and supporting introductions, generating and maintaining test plans, test software, and hardware fixtures for both onsite and offsite locations. The selected individual will provide timely and concise status updates as they pertain to metrics and issue resolution to the technical lead and/or project manager.
Requirements:
Experience with Labview within Windows OS. Labview TestStand a plus.
Knowledge of advanced hardware test engineering methods such as Boundary Scan a plus.
Ability to design and document interface test adapters and cabling to connect to UUT.
Knowledge of software development process and methodology.
Experience in automating tests for manufacturing environments
Experience in custom hardware.
Knowledge of C, C++, or Visual basic a plus.
5 years experience in Software Development or a related field and a Bachelors degree in Computer Science, Electrical Engineering, Computer Engineering, orsimilar field
Interested individuals please send resume to [email protected]:
Troy Roessler
Recruiter
BD Biosciences
2350 Qume Drive
San Jose, CA 95131
(408) 954-2299
[email protected]
BD BIOSCIENCES IS AN EQUAL OPPORTUNITY & AFFIRMATIVE ACTION EMPLOYER.

Eon Nurse
514-333-1622

UK Based company seeking experienced LabVIEW Developer for Full Time Position

·          High level of experience and competence with National Instruments Labview versions 7 & 8 and other National Instruments software and hardware products
·          Competence in Microsoft Visual C++, Visual Basic
·          A good working knowledge of a range of networking and communication systems and protocols including: Ethernet (all varieties), RS232, RS422, RS485, MODBUS, CAN
·          Experience with the design of control and monitoring systems for safety critical systems in offshore oil applications
·          Design, development, implementation and maintenance of software for both in house use and distribution·          Development and maintenance of software design and test specifications and associated documentation
·          Verification and validation of software and associated systems (hardware and software)
·          Management of software development process, applications tools and source code, thereby ensuring conformity with the company’s accredited ISO9001:2000 quality system
·          Management of software version control and releases
·          Customer support for products (principally for software related issues)
·          Design and development of Control System Graphical User Interfaces, and implementation of software aspects of system functional requirements through the use of standard software packages, and system configuration.
Contact Tim or Caroline on 01751 433100 or email [email protected]

Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation.

Seeking for LabVIEW a Job

Looking forward to work for a reputed organization.
Over 7 years of experience in design and development of customized PC based Embedded software’s, Industrial automations, ARM7TDMI Processor, Module Specific Driver Routines, Silicon Validation Test Cases design and Automation, Power Measurements, Audio Characterization, HDMI Characterization, PLL Jitter Measurements, LPC2104, ATMEL and PIC Micro Controller Programming, Programming Hand held terminals, Motion Controller Software’s, Data acquisition and Control Systems using LABVIEW 7.1/8.0/8.2 and NI DAQ Cards in the defense, manufacturing and telecommunication industries.
Experience with PMD USB Interface cards, GPIB Interface, VISA and Serial I/O Interface, Code Interface Nodes, Call Library Function nodes to interface with third party and custom Dlls, Multi-channel Data acquisition, Software Triggering, Analysis of acquired data with mathematical algorithms, Controlling and Monitoring applications, MODBUS and ASCII, I2C, UART communication programming on PC side as well as on-chip programming.
Experience in developing customized applications in areas like VB, VC++, C/C++, and Java with good customer interaction. Experience automating Silicon Validation tests with customized Test Sequences
Presently working in an MNC Company.
Will send resume on request.

Hi,
I have an opportunity as an SW test engineer availble in Orange County, California. This is a full time position with on of the world wide leaders in wired and wireless semiconductors. Can you please call me at your earliest convience at (949) 623 0003 or email, [email protected] I'm looking forward to hearing from you.
Best Regards,
Luke Doherty
Technical Recruiter
APEX Systems, Inc.
4100 Newport Place
Newport Beach, Ca 92660
(949)623-0003
(866)536-2739 Toll Free
(949)623-0004 Fax
[email protected]
www.apexsystemsinc.com

LabVIEW Consulting Company Searching for Resumes

EvaluMation, LLC is currently accepting resumes and searching for engineering talent. We are especially interested in candidates with a solid electrical/programming background and a strong work ethic. Experience with National Instruments products is always a plus!
Some desirable skill sets include
LabVIEW/TestStand Certifications
C/C++/Matlab Programming
Object Oriented Design Experience
Automation/Instrumentation
RF Test Experience
Interfaces Well With Customers
Engineering Degree
Security Clearance/Ability to Obtain Clearance
This positon is located in sunny Albuquerque,NM and relocation may be available
Please email your resumes to me at [email protected]
Thanks
Matthew Dubuque
EE/CLA/CTD
www.evalumation.com

You can use wireshark to do the investigation.
http://www.wireshark.org/
Tim
Johnson Controls
Holland Michigan

Seeking a LabView consultant in Richland, WA

Similar Messages

Maybe you are looking for