Seeking help for PXI card Installation Procedure Guidance

I have PXI-1042 Chassis with PXI Card numbers 2503 MUX , DIO and AIO cards. We are running LabWindows CVI with TestStand 3.0.I have to load all of the above into a new system. I wanna know the step wise procedure i need to follow for using these above mentioned cards w.r.t INSTALLATION process. May i get the document OR link OR any suggestions i need to follow.???
Thank you in advance

Similar Messages

Seeking Help for Guidance in developing a product using JAVA CARD

Hi All,
I am using windows environment with netbeans 6.8 as developer tool and MySql Server connectivity for back end process.My requirement is to develop applets and installing them to my Smart card and reader.my question is
1. how i am supposed to create applets to get the student id of particular student whose id is already registered in the database?
2. how to install them into the smart card?
3.what are the commands i am supposed to follow if other than APDU commands?
4.i found there is APDU commands but what do that each CLA,INS,p1,p2,Lc,le..commands used for?how can i use them in my creation of applets.i found the command varies for certain requirements.
5.if possible please help me with a small example so that i will start developing it.
can anyone help me in developing this application.i will be so helpful if anyone helps me in guiding me to develop the java card product.
Edited by: Sijukj on Mar 4, 2010 7:04 AM

Hi,
Welcome to the wonderful world of embedded Java development!
Sijukj wrote:
1. how i am supposed to create applets to get the student id of particular student whose id is already registered in the database?The first step is to download the Java Card Development Kit (JCDK) from the Sun website (along with the related documentation/specifications). If you plan on using your code on a real card, I would recommend JC version 2.2.1 or 2.2.2. If it is sufficient to run your applet on a simulator (as a proof of concept or for assignments) with no intention on running on real hardware you could go for JC 3.0.2 and use the supplied simulator. This version of JC does not have commercially available cards as of yet.
Once you have the applet coded and installed on your card, you would personalise the card for the card holder. This means loading card holder specific data into your application. This may also involve registering the smart card ID with the student in your database.
2. how to install them into the smart card?The procedure for loading and installing applets is outlined in the Java Card documentation (available with the JC development kits from Sun) and the GlobalPlatform card specifications (available from [http://www.globalplatform.org]). You can look into some open source tools for doing this (GPShell and the Java Card Development Kit).
3.what are the commands i am supposed to follow if other than APDU commands?This depends on what you are trying to achieve with your applet. If you want interoperability you could implement a standard like ISO7816 or IOS24727. This is a lot of work so you may just want to implement the proprietary you require for each operation you need (e.g. set student ID, get student ID etc).
4.i found there is APDU commands but what do that each CLA,INS,p1,p2,Lc,le..commands used for?how can i use them in my creation of applets.i found the command varies for certain requirements.These are defined in ISO7816 part 4.
The CLA byte gives information on the command you are sending such as secure messaging, command chaining, ISO or proprietary command
The INS is the instruction or command you are trying to perform
P1 and P2 are parameters to the command. These may not be required for each command but are able to be used to convey further information to the applet.
Lc is the length of the data field you are sending (e.g. for a PUT DATA command this would be the amount of data you are sending)
Le is the length of the data you expect to receive back from the card. If this is absent you do not expect the card to return any data, 0x00 means send all the data you have left (up to the limit of the response APDU)
5.if possible please help me with a small example so that i will start developing it.You can find example code in the Java Card Development Kit. There are a wide range of examples there that can help you get started.
Cheers,
Shane

Seeking help for a report design

How to create dynamic footnotes, if it's even possible, with Oracle
Reports?
A dynamic footnote would be one that appears on a page only if it is
used on that page.
For example:
Regions: South East West North
Widget A
S: $1500.
E: $100.
Footnotes:
S = South
E = East
------------- (page break of group or bottom of page) --------
Widget B
S: $1500.
W: $100.
Widget C
S: $1500.
Widget D
S: $15002.
W: $100.
Footnotes
S= South
W = West
We only want the ones that are used on the page to appear on the footnote
Any help will be appreciated,
Thanks.

Hallo Denis,
I have a similar problem: Want to display some value from the database in a margin field. I created a user parameter v_Title_Crew and pressetted it in the format trigger of a formula field. Used srw.set_field_char (0, :v_Title_Crew) in the format trigger of the margin field to display the content of the variable. But unfortunately this does not work: It seems to me that the margins are prepared before the query is executed; the variable is not set. Before I simply connected the margin field to the variable in the property palette but this didn't work better. Any idea how to solve this problem?
Thanks and regards - Ulrich

Seeking help for VisualAge for Java

Hi,
I am using VisualAge 3.5 Professional version to develop Java applications. But I don't know how to build an independent Java application that I can run it outside VisualAge. Can someone give me some tips? THanks!
I can build an application, and I can run within VisualAge, but when I try to export it, I can only choose either ".class" or ".java" file, so is it possible for me to build an independent ".exe" file from VisualAge? Because if I want to submit an software to a customer, I can't require him to install VisualAge, so what I can do?
Thanks a lot!

Hi!
- Right click on project
- Select export
- Select Jar flie
- Give Path and Name of Jar file
- Export!
Execute jar File.... :-)
I dont have Visual Age Installed on my machiene at the moment, so there could be a step missing.... :-S
Plus you can also export your whole project out at class files and directly execute your class file, but thats not a good approach for deploying to the client side.
Hope this helps
Regards
Omer

Seeking help for d/l of Encore content.

I am attempting to d/l EncoreContent_en-US.zip from http://helpx.adobe.com/encore/using/download-library-content.html but unfortunately the download is failing repeatedly. Is there another source from which I can d/l this? I am a long time Adobe user (circa 1992), am a CreativeCloud subscriber, but a first time Encore user, attempting to learn Encore and create a DVD menu that is due for work on Monday. Please let me know what I can do to successfully access this content which is not present in the app's original cloud download. Thank you.

It is a large download. I'll give you the info I have below, but I suspect you have to solve your problem with the download. Mac users especially had problems in the past, and there was some option for download manager that may have helped.
The full library is 3.8Gb when unzipped. The file you are trying to download is a zip only file that is 2.67 Gb. The earlier version (identical contents) was a 7z zipped file inside a zip file, and it was 1.67 Gb.
The page you link above is the best option.
But the page that has the smaller download (double compressed, zip and 7z) is at:
Library, title templates, template projects missing: Premiere Pro, After Effects, Encore
Do not download or try to install the file at the top of the page. Click on the link at the top for the download at the bottom of the page:
Download the extra library content

Seeking help for JAX-RPC in Eclipse

Hi, I am going to deploy a web service with JAX RPC in Eclipse.
I googled the tutorials, but most of them involves priciples and XML stuffs. I feel it is really hard for a beginner.
I am looking for some snapshots or other materials to demonstate how to use it.
Any help would be greatly appreciated.

Hi, I am going to deploy a web service with JAX RPC in Eclipse.
I googled the tutorials, but most of them involves priciples and XML stuffs. I feel it is really hard for a beginner.
I am looking for some snapshots or other materials to demonstate how to use it.
Any help would be greatly appreciated.

Help for AUDIGY se installati

Hi! I am a Mac user who is somewhat conversant with PCs. I am about to attempt to install an AUDIGY SE sound card on a friend's PC. (I know, I know, it's a fool's errand) My question is: what do I need to do in order to install this card beyond what are the steps included in the instructions, meaning how do I turn off the old sound card on the mother board? Do I need to reset the IRQ, BIOS or whatever, and how do I even do that? Anything else I need to know and/or do? Any help, particularly the step-by-step, hand-holding variety would be greatly appreciated. Thanks very much. David

Hi,
Try the instructions in the link below:
http://www.soundblaster.com/resource...id=53879&cat=4
Good luck

Seeking help for an unresolved problem in the MHP forum

Over in the discussion forum at the http://www.mhp.org webspace, in the "Getting Started With MHP Programming" section there is a thread named "How To Sign An App." where there are a lot of unanswered questions.
Is there anyone here who could perhaps have a look at the questions there please?
There used to be a man named Roger who was very knowledgeable about MHP in that forum and I have seen posts by him here in the past. I only know of him as Roger, so know of no other way to ask for his help than to hope that he is reading this posting. So, if Roger is reading this, could you possibly help please?
William

Hi Roger
Thank you for replying.
In the event Jon Piesing answered the question on 12 May.
http://www.mhp.org/forum/forum.xml?forum=13&thread=106&msgid=266
The answer was as follows.
quote
Right now app signing isn't used.
If it was used, the idea was that broadcasters would have signing certificates not developers. Whoever put your application on air would be responsible for signing it.
end quote
That resolved the problem which had been raised as it was clear that an application developer does not need to obtain a certificate.
William

Seek help for install java under linux

I have successfully installed java on linux , but not able to use many features tht i possibly could , such as jdbc , prblms on Mysql. most buggin prblm how do i set the compiler path to compile files from my home directory. i have to forcefully use the bin directory and run the complier given long address for the files. plz help.
abhi

abhi
I don't know about your MySQL problems based on what you have posted - can you post any more specific information? Have you got the relevant MySQL drivers in your classpath? The drivers are available here:
http://www.mysql.com/downloads/download.php?file=Downloads/Connector-J/mysql-connector-java-2.0.14.tar.gz
the README in that file will give you installation instructions.
how do i set the compiler path to compile files from my home directorySet the CLASSPATH environment variable to include whichever directories you like, eg (on bash) type:
export CLASSPATH=$CLASSPATH:.:<your java dirs>To make java easier to run, put the directory in which it is installed into your path:
export JAVA_HOME=<where you installed java>Then do
export PATH=$PATH:$JAVA_HOME/binverify it has worked by simply typing
javaYou can put all of these commands into the .*rc file for your shell, so that they are executed every time you open the shell. So if you are using bash you can put them into ~/.bashrc
Read up setting the PATH and CLASSPATH for more info.
HTH
Matt

Seeking help for compiling jdk1.5

During the compilation I got the following errors. I'm wondering if anybody have the same experience and the way to solve it? Thanks a lot.

../../../src/share/native/java/lang/System.c(90) : error C2017: illegal escape sequence
../../../src/share/native/java/lang/System.c(90) : error C2115: 'function' : incompatible types
../../../src/share/native/java/lang/System.c(90) : warning C4024: 'function through pointer' : different types for forma
l and actual parameter 2
../../../src/share/native/java/lang/System.c(90) : error C2143: syntax error : missing ')' before 'constant'
../../../src/share/native/java/lang/System.c(90) : error C2017: illegal escape sequence
../../../src/share/native/java/lang/System.c(90) : error C2017: illegal escape sequence
../../../src/share/native/java/lang/System.c(90) : error C2059: syntax error : ')'

Desperately seeking help for displaying image on button

i wrote the following method to create and display a button with an icon, doesn't work and i cannot figure out what the problem might be and how to fix it, please help me...
clo :))
public static void addButton(Container c, String title,
ActionListener listener)
JButton button = new JButton(title);
button.setBorder(null);
button.setFocusPainted(false);
button.setBorderPainted(false);
button.setContentAreaFilled(false);
ImageIcon icon = new ImageIcon("anImage.jpg");
button.setIcon(icon);
c.add(button);
button.addActionListener(listener);
the parameter c is of JPanel type and gets added to a JFrame object,
the source compiles and runs but i see no image on my button, sigh :((!
PS(the image file is placed in the same dir as the source file).

Why buttons and labels might not show up the icon?
Either your image is not in the classpath and you are trying to load it as a resource: see
http://java.sun.com/docs/books/tutorial/uiswing/misc/icon.html
or you are running the java machine from a different directory that you expect it does.
or the file doesn't exist.
To prove that the system cannot load the image use the example in the above link and the url will be null.
URL iconURL = ClassLoader.getSystemResource("anImage.jpg");

Need Help For Java Card Development

I am a beginner in java card technology , I am working on a project in which i need to send some instructions to smartcard store in smartcard, i have created GUI in java swings, but don't how to start communication between java swings application and smart card . Please Guide me to Possible way. Thanks in Advance .

Hi,
what do you exactly wanna know?
The syntax of APDU sending to smart card and response or the way to communicate with card reader?
Also make clear if you wanna know about GP instruction (load, install, select,...) or calling methods of your applet on smart card
Regards,
Hana

Installation of third party PXI Card supplied by Chroma

The problem is that I get the initialization error while I install the PXI-52911
The installation process done during installation is as follows.
1 I have installed LAB View 6.1 in the PXI Controller without the PXI 52911card
The NI Daq version is NI DAQ � 6.9.2f4,
The NI VISA 2.6.0
IVI Engine 1.83 version.
2 After installing the Lab view software I have installed the Latest driver software downloaded from FTP site.
3 Then I have installed the PXI Card and it got detected in the system.
4. When I checked in the NI VISA the details were as shown below.
5. After checking this I tried in the software Given by the supplier . I get an error as displayed below.
In this regard pl
ease let me know what as to how this problem can be solved.
With Regards,
Suresh
Application Engineer,
Captronic Systems,
Bangalore

Hi Suresh,
Thank you for contacting National Instruments. It sounds to me like there are three possible problems.
First, it is possible that there is a configuration problem with VISA. According to Chroma's webpage, this device does use NI-VISA. If this is true, the device should be listed in Measurement and Automation Explorer (MAX) under PXI System when it is properly installed and configured. If this device is not listed in MAX, then we need to make sure VISA is configured to recognize your device. In MAX, select the Tools menu, and select NI-VISA, VISA Options. Select VISA Passports, and make sure there is a checkmark next to "nivipxi.dll - VISA library passport for PXI." Now, select VISA settings and make sure the option to "Show all PXI/PCI Devices
accessible to VISA" is enabled.
Second, it is possible that NI-VISA or the software for your PXI card is corrupt. I suggest you uninstall your PXI device, NI-VISA, and the software for your PXI device. Once your system is clean, I recommend you reinstall NI-VISA, NI-IVI, and the instrument drivers for your PXI device. Once all of the software is installed, then you can reinstall the hardware.
I hope that helps. If that does not solve your problem, I will try to help you as much as I can, but it may be necessary to contact Chroma.
Regards,
David Shatila
Applications Engineer
National Instruments

Where to find connectors for PXIe plugin card

Can anyone help with information about XP4/XJ4 connectors for PXIe: Suitable vendor type numbers?
We want to make a custom card to plug into a PXIe-1071 chassis - but only need the 3.3V power from the chassis. But after long search I was unable to find a type number for such a connector. XJ4 is the smallest but obviously any of the connector types will do as they all have power pins.
Solved!
Go to Solution.

Hello heel.
I have searched in our internal papers, and according to my findings we are using ERNI as a manyfactor for our connectors.
ERNI
Also, since you want to design for own PXI board, you might be able to find some usefull information in the PXI specifications.
PXI Systems Alliance
I hope you can use this information.
Best Regards
Alex E. Petersen
Certified LabVIEW Developer (CLD)
Application Engineer
Image House PantoInspect

TS1646 I'v tried many times to update my applications however, my account can't do it because security code for my card is incorrect note that I'm sure my card details are correct completely so i need help to fix it as much as you can plz. Thnks

Hi
I'v tried many times to update my applications however, my account can't do it because security code for my card is incorrect note that I'm sure my card details are correct completely so i need help to fix it as much as you can plz. Thnks

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Seeking help for PXI card Installati​on Procedure Guidance

Similar Messages

Maybe you are looking for

Seeking help for PXI card Installation Procedure Guidance