Seeking help with an InDesign installation

I have successfully installed CS6 onto my virtual machine. The lone holdout is InDesign...naturally, it's the program I use and need the most. I have tried to search through the various troubleshooting recommendations on the Adobe site, to no avail. I simply don't know how to make heads or tails of this blizzard of error messages.
Any suggestions as to how to resolve this matter?
Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF027, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 27 error(s), 0 warning(s)
----------- Payload: {CFB770D7-8D43-1014-922B-CC2715FADE3F} Adobe InDesign CS6 Application Base Files 8.0.0.0 -----------
ERROR: DF027: Unable to copy file from "D:\Adobe CS6\payloads\AdobeInDesign8AppBase-mul\OEM_\Adobe InDesign CS6\Plug-Ins\InCopyWorkflow\InCopyImport.apln" to "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Plug-Ins\InCopyWorkflow\InCopyImport.apln" Error 1 Incorrect function.(Seq 8223)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 8223)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\ZX______.PFM" Error 3 The system cannot find the path specified.(Seq 8051)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8051)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\ZX______.PFB" Error 3 The system cannot find the path specified.(Seq 8050)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8050)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\ZX______.MMM" Error 3 The system cannot find the path specified.(Seq 8049)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8049)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\KozMinPro-Regular.otf" Error 3 The system cannot find the path specified.(Seq 8048)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8048)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\KozMinPro-Medium.otf" Error 3 The system cannot find the path specified.(Seq 8047)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8047)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\KozMinPro-Light.otf" Error 3 The system cannot find the path specified.(Seq 8046)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8046)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\KozMinPro-Heavy.otf" Error 3 The system cannot find the path specified.(Seq 8045)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8045)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\KozMinPro-ExtraLight.otf" Error 3 The system cannot find the path specified.(Seq 8044)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8044)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\KozMinPro-Bold.otf" Error 3 The system cannot find the path specified.(Seq 8043)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8043)
ERROR: DF023: Unable to delete file copy at "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts\KentenGeneric.otf" Error 3 The system cannot find the path specified.(Seq 8042)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8042)
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\fonts". Error 2 The system cannot find the file specified.(Seq 8042) E
RROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 8042)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
ERROR: DW050: - Adobe InDesign CS6 Application Base Files: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe InDesign CS6 Application Language Files_AdobeInDesign8AppLang-en_US: Install failed
System Requirements

i have installed all SUNWx* packages and now i can export X settings to my workstation....
but... is this the correct method to work? look for a complete instalation and see which packages has it?
in the console installation wizard i selected a lot of packages that the installer unchecked every time i tried to make a customization... is that a known bug?
now volume manager for example... it doesnt mount cds automatically... im SURE i need some packages more, but which ones?
is there any tool that finds broken dependencies and try to install missing packages? (sun instant check tool?)

Similar Messages

Where to find help with SQL Developer installation?

Hi,
I just want to try out SQL Developer and compare its capabilities to TOAD's. Unfortunately, I am not PC software savvy and now am stuck with a SQL Developer (sqldeveloper-1.2.2998) installation problem. When I clicked on the .exe file, I got a blank SQL Developer screen - there is nothing in the screen except a heading that reads 'Oracle SQL Developer'...
Does anyone know of a blog or a site that I can get some help with problems like mine?
Any help is much appreciated!

Hi,
SQL Developer forum link:
"http://forums.oracle.com/forums/forum.jspa?forumID=260"
There are 2 versions of SQL Developer, with/without JRE.
Try out the full install version with JRE.
HTH
Zack

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

Seek help!redhat as4 installation oracle 10g configure sysctl.config error!

[root@localhost ~]# /sbin/sysctl -p
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
[root@localhost ~]# /sbin/sysctl -a | grep shm
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe3'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe2'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe1'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe0'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe'
error: unknown error 22 reading key 'net.ipv6.route.flush'
error: unknown error 22 reading key 'net.ipv4.route.flush'
vm.hugetlb_shm_group = 0
error: unknown error 22 reading key 'fs.binfmt_misc.register'
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
[root@localhost ~]#
seek help!!!! help!!!

[root@localhost ~]# /sbin/sysctl -e -a | grep shm
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe3'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe2'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe1'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe0'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe'
error: unknown error 22 reading key 'net.ipv6.route.flush'
error: unknown error 22 reading key 'net.ipv4.route.flush'
vm.hugetlb_shm_group = 0
error: unknown error 22 reading key 'fs.binfmt_misc.register'
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
You have new mail in /var/spool/mail/root
[root@localhost ~]# /sbin/sysctl -e -a | grep shm
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe3'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe2'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe1'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe0'
error: unknown error 0 reading key 'dev.parport.parport0.autoprobe'
error: unknown error 22 reading key 'net.ipv6.route.flush'
error: unknown error 22 reading key 'net.ipv4.route.flush'
vm.hugetlb_shm_group = 0
error: unknown error 22 reading key 'fs.binfmt_misc.register'
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
[root@localhost ~]#
From [email protected] Thu Dec 22 04:02:05 2005
Return-Path: <[email protected]>
Received: from localhost.localdomain (localhost.localdomain [127.0.0.1])
     by localhost.localdomain (8.13.1/8.13.1) with ESMTP id jBLK25Av010183
     for <[email protected]>; Thu, 22 Dec 2005 04:02:05 +0800
Received: (from root@localhost)
     by localhost.localdomain (8.13.1/8.13.1/Submit) id jBLK2353010181
     for root; Thu, 22 Dec 2005 04:02:03 +0800
Date: Thu, 22 Dec 2005 04:02:03 +0800
From: root <[email protected]>
Message-Id: <[email protected]>
To: [email protected]
Subject: LogWatch for localhost.localdomain
################### LogWatch 5.2.2 (06/23/04) ####################
Processing Initiated: Thu Dec 22 04:02:02 2005
Date Range Processed: yesterday
Detail Level of Output: 0
Logfiles for Host: localhost.localdomain
--------------------- Cron Begin ------------------------
**Unmatched Entries**
STARTUP (V5.0)
STARTUP (V5.0)
---------------------- Cron End -------------------------
--------------------- Kernel Begin ------------------------
WARNING: Kernel Errors Present
vesafb: probe of vesafb0 failed with error -6...: 2 Time(s)
---------------------- Kernel End -------------------------
--------------------- pam_unix Begin ------------------------
crond:
Unknown Entries:
session closed for user root: 217 Time(s)
session opened for user root by (uid=0): 217 Time(s)
gdm:
Unknown Entries:
authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost= user=root: 1 Time(s)
sshd:
Authentication Failures:
unknown (211.93.8.116): 11 Time(s)
mysql (211.93.8.116): 1 Time(s)
oracle (211.93.8.116): 1 Time(s)
root (211.93.8.116): 1 Time(s)
system-install-packages:
Unknown Entries:
auth could not identify password for [root]: 2 Time(s)
---------------------- pam_unix End -------------------------
--------------------- Connections (secure-log) Begin ------------------------
New Users:
useradd (oracle)
New Groups:
useradd (oracle)
**Unmatched Entries**
usermod[2945]: change user `oracle' password
userhelper[3909]: pam_timestamp: updated timestamp file `/var/run/sudo/root/unknown'
userhelper[3910]: running '/usr/sbin/system-config-network' with root privileges on behalf of 'root'
userhelper[4298]: pam_timestamp: updated timestamp file `/var/run/sudo/root/unknown'
userhelper[4299]: running '/usr/share/system-config-users/system-config-users' with root privileges on behalf of 'root'
userhelper[7961]: pam_timestamp: updated timestamp file `/var/run/sudo/root/unknown'
userhelper[7962]: running '/usr/sbin/system-config-packages' with root privileges on behalf of 'root'
userhelper[9157]: pam_timestamp: updated timestamp file `/var/run/sudo/root/unknown'
userhelper[9158]: running '/usr/sbin/system-config-packages' with root privileges on behalf of 'root'
userhelper[9163]: pam_timestamp: updated timestamp file `/var/run/sudo/root/unknown'
userhelper[9164]: running '/usr/sbin/system-config-packages' with root privileges on behalf of 'root'
---------------------- Connections (secure-log) End -------------------------
--------------------- SSHD Begin ------------------------
SSHD Started: 2 Time(s)
Failed to bind:
0.0.0.0 port 22 (Address already in use) : 2 Time(s)
Failed logins from these:
mysql/password from ::ffff:211.93.8.116: 1 Time(s)
oracle/password from ::ffff:211.93.8.116: 1 Time(s)
root/password from ::ffff:211.93.8.116: 1 Time(s)
**Unmatched Entries**
Invalid user fluffy from ::ffff:211.93.8.116
Failed password for invalid user fluffy from ::ffff:211.93.8.116 port 50249 ssh2
Invalid user admin from ::ffff:211.93.8.116
Failed password for invalid user admin from ::ffff:211.93.8.116 port 50738 ssh2
Invalid user test from ::ffff:211.93.8.116
Failed password for invalid user test from ::ffff:211.93.8.116 port 51217 ssh2
Invalid user guest from ::ffff:211.93.8.116
Failed password for invalid user guest from ::ffff:211.93.8.116 port 51434 ssh2
Invalid user webmaster from ::ffff:211.93.8.116
Failed password for invalid user webmaster from ::ffff:211.93.8.116 port 51651 ssh2
Invalid user library from ::ffff:211.93.8.116
Failed password for invalid user library from ::ffff:211.93.8.116 port 52584 ssh2
Invalid user info from ::ffff:211.93.8.116
Failed password for in
valid user info from ::ffff:211.93.8.116 port 52810 ssh2
Invalid user shell from ::ffff:211.93.8.116
Failed password for invalid user shell from ::ffff:211.93.8.116 port 53024 ssh2
Invalid user linux from ::ffff:211.93.8.116
Failed password for invalid user linux from ::ffff:211.93.8.116 port 53261 ssh2
Invalid user unix from ::ffff:211.93.8.116
Failed password for invalid user unix from ::ffff:211.93.8.116 port 53491 ssh2
Invalid user webadmin from ::ffff:211.93.8.116
Failed password for invalid user webadmin from ::ffff:211.93.8.116 port 53715 ssh2
RSA1 閿殑鐢熸垚 succeeded
RSA 閿殑鐢熸垚 succeeded
DSA 閿殑鐢熸垚 succeeded
---------------------- SSHD End -------------------------
------------------ Disk Space --------------------
/dev/mapper/VolGroup00-LogVol00
/dev/hda1 3.9G 47M 3.7G 2% /boot
###################### LogWatch End #########################
From [email protected] Fri Dec 23 04:02:03 2005
Return-Path: <[email protected]>
Received: from localhost.localdomain (localhost.localdomain [127.0.0.1])
     by localhost.localdomain (8.13.1/8.13.1) with ESMTP id jBMK23vb020633
     for <[email protected]>; Fri, 23 Dec 2005 04:02:03 +0800
Received: (from root@localhost)
     by localhost.localdomain (8.13.1/8.13.1/Submit) id jBMK23wD020631
     for root; Fri, 23 Dec 2005 04:02:03 +0800
Date: Fri, 23 Dec 2005 04:02:03 +0800
From: root <[email protected]>
Message-Id: <[email protected]>
To: [email protected]
Subject: LogWatch for localhost.localdomain
################### LogWatch 5.2.2 (06/23/04) ####################
Processing Initiated: Fri Dec 23 04:02:02 2005
Date Range Processed: yesterday
Detail Level of Output: 0
Logfiles for Host: localhost.localdomain
--------------------- Init Begin ------------------------
Re-execs of init: 1 times
---------------------- Init End -------------------------
--------------------- pam_unix Begin ------------------------
crond:
Unknown Entries:
session closed for user root: 458 Time(s)
session opened for user root by (uid=0): 458 Time(s)
sshd:
Authentication Failures:
unknown (fw-25-15-a8.bta.net.cn): 6 Time(s)
oracle (82.78.172.155): 3 Time(s)
root (fw-25-15-a8.bta.net.cn): 3 Time(s)
unknown (202.29.52.44): 1 Time(s)
Unknown Entries:
2 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=82.78.172.155 user=oracle: 2 Time(s)
6 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=82.78.172.155 user=oracle: 1 Time(s)
service(sshd) ignoring max retries; 7 > 3: 1 Time(s)
---------------------- pam_unix End -------------------------
--------------------- sendmail Begin ------------------------
Bytes Transferred: 9906
Messages Sent: 2
Total recipients: 2
---------------------- sendmail End -------------------------
--------------------- SSHD Begin ------------------------
Failed logins from these:
oracle/password from ::ffff:82.78.172.155: 3 Time(s)
root/password from ::ffff:202.108.25.15: 3 Time(s)
**Unmatched Entries**
Invalid user test from ::ffff:202.108.25.15
Failed password for invalid user test from ::ffff:202.108.25.15 port 49076 ssh2
Invalid user guest from ::ffff:202.108.25.15
Failed password for invalid user guest from ::ffff:202.108.25.15 port 49212 ssh2
Invalid user admin from ::ffff:202.108.25.15
Failed password for invalid user admin from ::ffff:202.108.25.15 port 49318 ssh2
Invalid user admin from ::ffff:202.108.25.15
Failed password for invalid user admin from ::ffff:202.108.25.15 port 49448 ssh2
Invalid user user from ::ffff:202.108.25.15
Failed password for invalid user user from ::ffff:202.108.25.15 port 49620 ssh2
Invalid user test from ::ffff:202.108.25.15
Failed password for invalid user test from ::ffff:202.108.25.15 port 50275 ssh2
Invalid user test from ::ffff:202.29.52.44
Failed password for invalid user test from ::ffff:202.29.52.44 port 2356 ssh2
---------------------- SSHD End -------------------------
------------------ Disk Space --------------------
/dev/mapper/VolGroup00-LogVol00
/dev/hda1 3.9G 47M 3.7G 2% /boot
###################### LogWatch End #########################
Message was edited by:
user475340

Seeking help with software upgrade questions for my PowerBook G4

I am seeking help/advice for a very low tech guy. I upgraded my PowerBook G4 (ancient I know but I have trouble with our thow away society), to Leopard 10.5.2. However, my iDVD no longer works. I plan on upgrading to iLife'08, but based on the system requirements, I am not certain all of the features (i.e. iMovie'08) will work on my older processor. Before I upgrade to iLife, can anyone tell me if I should do it and if they will work on my all the features will work on my PowerBook G4?

Many prefer iLife'06 to '08, but we went from '05 to '08.
You are correct in that iMovie'08 will not run on your Book, but when you install iLife'08 you are given the opportunity to download iMovie'06 for free.
I can't vouch for it fixing your iDVD however.
Joe

Please help with download and installation

Hi,
I am trying to download jdk1.4etc to Solaris Sparc. I tried downloading several times, all the times I get corrupt files. How and from where do I install JDK2 on Solaris. i am also in search of a good text editor like textpad for Solaris. Can anyone give me suggestions? Also, I need it immediately for my term assignments.
Please Help!

I am also having this problem. I have tried both the
tar.Z and sh files. I have run the .sh as myself and
as root. Here's what I see with the .sh installer:
Do you agree to the above license terms? [yes or no]
yes
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please
refer to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
I am anxious to find a solution.I am having the same problem with both a download, j2sdk-1.4.0-linux-i386-rpm.bin, and Sun ONE cdrom, /disc3/j2se/1.4/j2sdk-1_4_0-linux-i386.bin, versions. I sincerely doubt that both are corrupted, at least I hope not. I'm attempting to set up the sdk under RedHat 7.2 in /usr/java. Have tried as both a user and as root - no joy! I would greatly appreciate any suggestions or help.

Seeking Help with Album Image Issues in iPod Classic

Hi folks -
I have a new 160 iPod Classic and have two album image-related issues I'd appreciate some help with.
In the case of several albums where I'd associated my own art with them in iTunes, the formatting appeared off in my iPod due to the vertical/horizontal proportions. So I corrected the images, replaced the images via iTunes, and re-synced. All of the old images were replaced - except for two. Is there any way to get my iPod to recognize the change to these two images, as it did for all the others?
Secondly, my "The Allman Brothers Band Live at Fillmore East" album was appearing twice in both the Cover Flow and Album list. That was strange, except that after the latest sync it now appears six times! It's only in one place in iTunes, and not erroneously set as a compilation or anything. This is the only album displaying this behavior...
Thanks for any suggestions or advice!
Frank
Message was edited by: frank3si

Yes my e-mail address is [email protected]
Thank you for your kind attention to my problem. I am looking for one on one brief consultation with my laptop in Cincinnati. If not then I will compose a clear question with VI.
These manuals are well known to me NI Visions Concepts ManualIMAQ Vision for LaVIEW User ManuelNI-IMAQ for USB Cameras My problem is moving to the next step of Create an array of USB imagePerform math on array Display results Sincerely,Tom Lohre cell 513-236-1704, [email protected] http://tomlohre.com/images/lafley.jpgAG Lafley, Chairman & CEO of Proctor & Gamble http://tomlohre.com/lafley.htm A.G. Lafley enjoyed hearing of Tom's painting robot and thought it played well to his new book: "The Game-Changer: How You Can Drive Revenue and Profit Growth With Innovation." http://tomlohre.com/newart.htm
Tom Lohre artist/scientist
Has a operating painting robot using RoboLab/RCX
Developing a LabView/ NXT robot that analyzes an image for aesthetic quality.

FAQ: Where can I get help with downloading and installation?

See this page for options for contacting Adobe regarding problems with downloading and installation:
"Contact support - download and installation"
You can ask questions and search for answers on the Adobe user-to-user forum dedicated to downloading, installation, and setup.
You can also check the Customer Service FAQ lists for issues with downloading and installation.
You can order Premiere Pro CS6 here ... or try it free for 30 days.

Hello,
This kind of question is best asked in the Windows Forums, however I've had some succession with a similar issue myself.
Non-Genuine Windows means that it can't authenticate your copy of Windows.
It's not a problem, all your need is a genuine product key code. Provided you don't have different version of Windows 7 installed to the one you are buying (for example windows 7 Home Premium and Windows 7 business) Then you can use the new key code.
Click on the Start Button and type: CMD (into the 'Search programs and files' field in the Start Menu)
The Start Menu will show 'CMD.exe',
Right-click the CMD.exe file and select Run As Administrator.
In the CMD window, type: slmgr.vbs -ipk <type your product key here>
To activate windows after changing the key, type: slmgr.vbs -ato
It should now accept the new key code and you will need to be connected to the Internet to authenticate.
If by chance the windows 7 types are different (One is Home premium say and the other is Business) then you will need to uninstall that copy of Windows 7 and install the new one. If your using BootCamp then you will need to go into BootCamp under system preferences and remove that copy of Windows (delete it)
Then create a new setup with your new Windows 7 disk.
For me I had the same type of windows, changing the product code worked. Saved me the bother of having to reinstall Windows again and it was all genuine.
Best of luck

Satellite C660 - need help with fresh Win7 installation

After a problem with my SatC 660 i decided to Nuke the hard drive and do a fresh install using a W7 32 Bit disk created from the web ( there is a free library of Windows 7 iso images (Sorry forgot name).
So i had the disk in and the disk drive which has the disk in, W7 is now saying it cant find the device driver for the DVD Drive which it has just used for it to show the W7 first screen.
Looked everywhere for the drivers for the DVD Drive but no joy on the web.
Can anybody help me out please?

Maybe stupid question on the beginning but why you don't install original Win7 64 bit? I presume you got your machine with preinstalled operating system.
> So i had the disk in and the disk drive which has the disk in, W7 is now saying it cant find the device driver for the DVD Drive which it has just used for it to show the W7 first screen.
Sorry but after reading this sentence Im completely confused and don't know how to understand this. If you have created bootable installation disc I hope you were able to install Win7 correctly. After first start you must continue to install all necessary drivers, tools and utilities that you can find on Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Optical disc drive uses Microsoft driver and there is no some special driver for this device. It must be recognized automatically by preinstalled operating system.
If my posting was not helpful for you please be more precise with your problem description.

Need help with a Silent Installer for Photoshop Elements 10

I can't seem to get the silent installer working. I've used the Elements 9 instructions for 10 but I still get pop-ups requesting info:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-volume-license-photoshop.html
I cannot find any info at all relating specifically to Elements 10. Before I go digging into the msi with ORCA (preferable to have something I can deploy in Active Directory through GPO) I tought I'd ask here

@mtarggart
Delete the blank between /UL and 1033, and it will work. :-)
@Davide M, thanks a lot for your helpful article!
mtarggart wrote:
I've tried the above command and I keep getting prompted to select an Install Language. I'm trying to install this on Windows 7 x64 Enterprise. From an elevated command prompt pointed to the directory of the Elements install files (C:\PSE 10), this is what I am typing: start /wait setup.exe /UL 1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx".
For the ones who want to use installation from a server share,
change "Setup.exe" by using \\Servername\Share\Setup.exe
and set \\Servername\Share to your Servershare.
The last thing I've been searching for was setting the right country
and stopping PSE from asking me which country I am living in.
Seems as if there was an additional switch e.g. "Country=244" for US.

Urgent help with discoverer 4i installation

Hi All, I just started working on a discoverer upgrade process. I need help in installing discoverer 4i and them refering to a 10g database. Can any one guide to a reference doc which I may refer to finish the complete install. In other words I need to configure discoverer 4i so that we can do development. I have downloaded the admin, desktop and the 3201601 patch for 4i as well.
Not sure if they dont know it or they are not interested in it.
I have been working as a disco admin and developer for quiet some time now but dont know how to install and do the configuration.
Thanks.
Edited by: Paul S on Aug 27, 2008 3:06 PM

Hi Paul,
I hate to tell you, but you should be implementing Discoverer 10g (10.1.2.x) and not 4i. Discoverer 4i is de-supported and I do not think it was ever certified with 10g database.
Check the following MetaLink note for details.
237607.1 ALERT: Required and Recommended Patch Levels For All Discoverer Versions
One exception, you mentioned an upgrade. That tells me you are likely on version 3. In which case, you would need to install the 4i EUL to migrate from 3 to 4 and then upgrade to 10g. If you don't have much invested in 3, then it might be a good chance to start clean in 10g. In your case, you install the base 3.1.37 Administrator version on your Windows desktop (that old installer requires it to be the first Oracle product installed and in the default home), then apply 3201601 to bring you to 4.1.48.06, then download and apply 4.1.48.08 (3451630 ).
You can then upgrade the 3 EUL to 4, following the Administration Guide, located on OTN: http://www.oracle.com/technology/documentation/discoverer.html
Then you can do the same with Discoverer 10G Administrator
I'm just the messenger. Good Luck.

Can someone help with Windows 7 installation on iMac?

I am trying to install Windows 7 on my new iMac. When in Boot Camp and setting up the partition I am instructed to insert the new Windows 7 installation disc. Things go smoothly till I get to the window where I have to pick a drive. There are none that will work and then I am stuck and I have to start the process all over. Can anyone help me get past this point?

Ps, this my first experience ever with an Apple product.

Need help with Acrobat Xi installation error

Here is the error I am getting...
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s) ----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} ----------- ERROR: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab. Verify that the file exists and that you can access it. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab. Verify that the file exists and that you can access it. ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603 ------------------------------------------------------------------------------------- "Windows 7. Have tried installation several times. Need help now, considering I am paying for this service!

Thank you for the replies.
Jeff, I will check that link and try what is suggests.
Bill, to answer your questions...
1. This is a CC installation.
2. Yes, I am logged in as the admin and I have no anti-virus other than Microsoft Essentials enabled.
3. This is a download installation.
To give even more info that might help, I am using a Windows 7 machine with more than enough capability to run CC. I had installed Photoshop, Illustrator, among other apps successfully. I then tried the Acrobat XI installation. Acrobat XI downloaded and extracted, but when it started installing it froze around 50% and then I received the installation failed error from Windows. Once that was confirmed the CC install progress finishes but shows failure. The More Info reveals the error I pasted in above. Afterward, none of the CC apps worked properly and had to be uninstalled. So, next I installed the CC downloader and tried to start installing Acrobat XI first but the same error occurred. That's when I got frustrated and posted my original message. My limited knowledge leads me to think the error issue lies in the AcroPro.msi file but I have no idea what that is or how to find, correct, or install it.
Thanks again for any help you can provide. I'm really frustrated that I'm paying for something that I can't use.

I need help with my CS5 installation

My CS5 installed normally as usual, but once it was done it was telling me that there was an error in installing, told me to restart and proceed with the installation again.
I did it twice, and now it seems to work but it gave me the same error.
I opened the program and it's telling me that,"Photoshop has encountered a problem with the display driver, and has temporarily disabled the GPU enhancements. Check the video card manufacturer's website for the latest software."
I did an update search on my computer for that specific driver and apparently it's up to date. I also read on a forum that I needed to download Adobe Driver. But, unfortunately it's saying the same thing that CS5 said after the installation, to restart and continue with the installation.
Help?

if you're encountering multiple different error messages,
1. uninstall cs5,
2. run the cleaner,
3. update your video driver (go to your video card's manufacturer website),
4. restart your computer (http://www.adobe.com/support/contact/cscleanertool.html) and then
5. reinstall cs5.

Desperately Seeking Help with AIR

Hello,
I LOVE my Air and am so dismayed that it is not working for me. Coincidence or not, it all started after Apple fixed my broken hinge. Up till then, it worked perfectly. Here is what's going on.
When I shut my Air down, it will not restart. The drive starts up, spins but the screen never changes from black. I put a snow leopard installation disk into the optional disk drive and re-installed the operating system on to the hard drive. It then boots up and I have the hard drive working with everything that was on it before I did the installation. If i put it to sleep and wake it up, it works. If I shut it down, I am back to where I started. I've reinstalled it 5 times with the same results everytime. But now it starts up and gives me the flashing apple with question mark sign.
What can I do? I would be greatly appreciative of any help. Thank you so much!

Take it back and tell them to fix it or replace it. I will be sending mine back for a full refund this week.
No way am i putting up with all these bugs...won't start...won't wake from sleep....won't charge when off....on a computer of this price.
This will be my first mac returned for a refund since I have been with them these many years, but this machine is bugged and there is no way i am going to live with endless trips to the repair shop only to see things get worse, especially after surgery. APPLE ARE YOU LISTENING?

Seeking help with an InDesign installation

Similar Messages

Maybe you are looking for