Seeking help with re-installing I-Tunes

Greetings all, Initially I-tunes was installed and running well, however, yesterday it refused to open and same thing today, so I uninstalled it. Now that I am trying to re-install it I keep on getting the following message "1607:Unable to install Installshieled scripting runtime" and that stops the installation program from going any further.
Does this suggest that my computer maybe too old or overloaded?
Any assistance will be greatly appreciated.
thank you

Hmm, you must be using a very old version of iTunes, iTunes hasn't used installshield for a while.
The installshield site has this on the 1607 error:
http://consumer.installshield.com/kb.asp?id=Q108340
It is probably a good idea to ensure you have the latest installshield:
http://consumer.installshield.com/kb.asp?id=Q108322
The page is confusing becuase it starts off with stuff about intallers on CD. But if you go further down the page you will see that you can see whch versions of install shield by looking in:
C:\Program Files\Common Files\InstallShield\Driver
Right at the bottom of the page it gives a link for an installer for InstallShieldEngineUpdate1100.exe
But ... are you trying to reinstall an old version of iTunes? How about downloading the latest version:
http://www.apple.com/itunes/download/

Similar Messages

I need help with re installing my apple account for itunes.

Had problems with my itune account, so I uninstalled and now need help with re-installing the program with the songs I have already purchased.

Your iTunes account is something at the iTunes Store online. It is not possible to uninstall it. Do you mean the iTunes application? Even if you delete the application and restore it, it should not have deleted your iTunes library (essentially the contents of the iTunes folder in Music) on your computer unless you did a separate steep and specifically deleted that too. You need to tell us what it was you deleted.

Help with WinXP install... Is VC the culprit?

Recently, I purchased a whole new set of parts to build another computer. I need help on how I can fix this thing, because WinXP Home SP1 doesn't want to complete the installation. This is the setup as it is...
Thermaltake XaserIII Midtower ATX
Thermaltake Purepower 400v PS
Temp sensor w/4 fan control
Soyo KT600 Dragon Ultra Platinum
AMD Athlon XP 3200+ Barton
2x512mb Corsair DDR400
Western Digital WD2000JD 200GB SATA HDD
MSI FX5700 VT2DR256
Sound Blaster Audigy 2 ZS Platinum
HP DVD+R/+RW dvd200i
Generic DVD ROM
Generic FDD
Soyo 6-in-1 card reader thingie (Came with MB, no PCI plugs, just USB/1394)
Microsoft Intellimouse Explorer Optical
Some dumb Compaq explorer keyboard (SK-2800C)
Another crappy Compaq monitor (MV520)
Seagate 10GB HDD EIDE
Klipsch ProMedia Ultra 5.1
I listed everything that is inside and outside of my case. I have the 10GB HDD just in case, and it's just a leftover from the old computer. (It was a compaq if you didn't already guess) I contacted Microsoft and spent some 10 total hours with them trying every damn thing possible to start this sucker up, and it still freezes. (They say take it to a tech shop... I don't have the time for that) I am in the stage in the Win install where it starts to ask for info. Reg#, name, time/date, etc. It freezes anywhere between just after entering the Reg#, and until "Saving Settings", which I recall as the last step. Then, the monitor either turns blank, or the system freezes completely. It usually stalls out around the Registering Components section of this. Can anyone help? Any help would be GREATLY appreciated.
Dave
[email protected]

It is a copy of XP Home SP1. It isn't recovery diskettes... Well, ladies and gentlemen... My computer is finally seeking help... It finally at least told me what it needs... The following error messages popped up while I was out doing something, and here is what they are...
First, from Washington DC, she likes long walks on the beach, walking her poodle, and playing in dumpsters... Suitors, meet "Windows could not load the installer for Display. Contact your hardware vendor for assistance."
Next, from Long Beach, CA... She loves the guys, the cars, and the money... But don't think that makes her easy... Meet "Windows could not load the installer for Monitor. Contact your hardware vendor for assistance."
Now, by display, does it reference to my VC or monitor? Also, when the hell do I load the installer into the Windows installer?

Seeking help with software upgrade questions for my PowerBook G4

I am seeking help/advice for a very low tech guy. I upgraded my PowerBook G4 (ancient I know but I have trouble with our thow away society), to Leopard 10.5.2. However, my iDVD no longer works. I plan on upgrading to iLife'08, but based on the system requirements, I am not certain all of the features (i.e. iMovie'08) will work on my older processor. Before I upgrade to iLife, can anyone tell me if I should do it and if they will work on my all the features will work on my PowerBook G4?

Many prefer iLife'06 to '08, but we went from '05 to '08.
You are correct in that iMovie'08 will not run on your Book, but when you install iLife'08 you are given the opportunity to download iMovie'06 for free.
I can't vouch for it fixing your iDVD however.
Joe

Tips and help with re-installing Lion over Snow Leopard

I had MAJOR issues with my initial Lion install on my Mid-2009 MBP- so much so, that I had to wipe my hard drive and re-install Snow Leopard and all my applications. My major issues were as follows:
1. All my files were locked out- I could open them in most cases, but I couldn't overwrite them- Lion had aded some funky permissions scheme that I didn't recognize, and my user name wasn't present on any of them. In some cases, I couldn't even open files, even though they were resident on my hard drive (and in my own user folder) before the upgrade to Lion.
2. Apple's own Universal Binary apps wouldn't work after the upgrade. Final Cut Pro 6, in particular, came up with a message that it was a "PowerPC" app and wouldn't run- yet Shake 4.1 would run just fine!
3. Adobe Creative Suite 3- after the upgrade, my Abode Ceative Suite 3 apps worked just fine, for about a day- that is, until I tried to correct the file permissions issue by changing permission on a few of my folders in my User folder (and electing to change permissions in the files contained therein)- at which point my Adobe apps told me that they were damaged and needed to be reinstalled. Yet after uninstaling and reinstalling the entire Creative Suite 3 times, I still would get the same message.
My entire workflow is Adobe CS and FCS2- why chould I have to pay the upgrade costs just to use Lion? FCPX is completely brkoen for my workflow and eqipment, and Adobe can't even guarantee that CS5 works with Lion- so why does Apple insist on Lion when it's hardly even compatible with its own products?
I really want to use Lion, but I am looking for some tips on instalation to kep these problems from happening again. I didn' have ANY of these problems with upgrading OS 10.2 through 10.6. Any help with prepping my system/files for upgrading would be helpful. Thanks!

any new Apple kB articles
http://support.apple.com/kb/index?page=articles
Me, I think clone backups are more useful, and only use T.M. as secondary.
Using Cloning as a Backup Strategy
I'd assume that professional apps may need to be tested still; and of course check to see what you have that depends on PowerPC code and Rosetta first. That has some in a tither.
A clone lets you still be able to boot Snow Leopard. Check out Carbon Copy, SuperDuper.

Help with Classic install

Hi all, I'm sure this question has been asked before so forgive me. I've looked all around and found solutions that were 'similar' to my problem but none that will work. here we go.
I just got an old Mac G4 tower (AGP) and bought Tiger to put on it. (not sure what version of OSX was on it before) Anyway I did a clean install and everythig works great. No problems at all.
I was installing a program yesterday that turns out needs Classic support. Right now there is no updated version of this program and I need to run it. My machine doesnt have Classic support. How do I install it? I've read that there is a second install disk that you can use my my boxed version of OSX has only one disk. I searched the disk and see that there is a Classic folder on it with an install app but when i run it it doesnt do anything. It just informs me that neither of my hard drivers have Classic.
I'm stuck. Any help would be greatly appreciated. I REALLY need to run this legacy application.
G4 (AGP) Mac OS X (10.4.7)
G4 (AGP) Mac OS X (10.4.7)

I'd find that 2nd DVD, it's supposed to come with OSX
10.4. Follow the instructions on this article and an
"Applications (OS9)" folder will appear in your
Macintosh HD.
http://docs.info.apple.com/article.html?path=Mac/10.4/
en/mh763.html
OS 9 has not shipped with OS X since Jaguar.
However, OS 9 does ship with PPC Macs. It should be on the install DVD, or on the 2nd or 3rd CD, depending on which Mac. Example: my original 700 MHz eMac shipped with OS X 10.1 and OS 9.2.2 on separate CDs, both bootable. My 1.25 GHz eMac shipped with OS X 10.3 and OS 9.2.2, with the OS X disc being bootable and the OS 9.2.2 disc being part of the applications suite and not being bootable. My 2.1 GHz iMac shipped with OS X 10.4 and OS 9.2.2 on the same DVD. OS 9.2.2 is again part of the application suite and cannot be booted from the DVD. The Intel Macs at the office shipped with OS X 10.4 and that's it, no OS 9.2.2 as Classic does not run on them.
A boxed set of OS X 10.2 shipped with OS 9.2.2 on a separate CD. (It was a white 'universal install' CD and would install on all Macs produced up to that time.) I have such a boxed set on a shelf in the cupboard right now. A boxed set of OS X 10.3 shipped with four CDs, none of which was OS 9. I have such a boxed set on a shelf near my eMac right now. A boxed set of 10.4 shipped with a single DVD. I have such a boxed set on a shelf near my eMac right now. I have just opened the box and verified by sight: one DVD, OS X only. A further check of the contents of that DVD show no mention of OS 9.
The OP will need to have the system CDs or DVD which shipped with his Mac to install Classic.
iMacG5 2.1GHz 1.5GB RAM Mac OS X (10.4.7) eMac 1.25 GHz 2 GB, assorted Windows boxes

Seeking Help with Album Image Issues in iPod Classic

Hi folks -
I have a new 160 iPod Classic and have two album image-related issues I'd appreciate some help with.
In the case of several albums where I'd associated my own art with them in iTunes, the formatting appeared off in my iPod due to the vertical/horizontal proportions. So I corrected the images, replaced the images via iTunes, and re-synced. All of the old images were replaced - except for two. Is there any way to get my iPod to recognize the change to these two images, as it did for all the others?
Secondly, my "The Allman Brothers Band Live at Fillmore East" album was appearing twice in both the Cover Flow and Album list. That was strange, except that after the latest sync it now appears six times! It's only in one place in iTunes, and not erroneously set as a compilation or anything. This is the only album displaying this behavior...
Thanks for any suggestions or advice!
Frank
Message was edited by: frank3si

Yes my e-mail address is [email protected]
Thank you for your kind attention to my problem. I am looking for one on one brief consultation with my laptop in Cincinnati. If not then I will compose a clear question with VI.
These manuals are well known to me NI Visions Concepts ManualIMAQ Vision for LaVIEW User ManuelNI-IMAQ for USB Cameras My problem is moving to the next step of Create an array of USB imagePerform math on array Display results Sincerely,Tom Lohre cell 513-236-1704, [email protected] http://tomlohre.com/images/lafley.jpgAG Lafley, Chairman & CEO of Proctor & Gamble http://tomlohre.com/lafley.htm A.G. Lafley enjoyed hearing of Tom's painting robot and thought it played well to his new book: "The Game-Changer: How You Can Drive Revenue and Profit Growth With Innovation." http://tomlohre.com/newart.htm
Tom Lohre artist/scientist
Has a operating painting robot using RoboLab/RCX
Developing a LabView/ NXT robot that analyzes an image for aesthetic quality.

Help with Tiger install and getting hot keys and start up manager to work

this open firmware issue, how do you get around it? Wonder if it is causing me trouble; i.e. shift and other keys do not work and keeping me from booting with Tiger install. How do I access these keys then?
I did a clean install on a secondary internal drive (device 1) 150GB Maxtor
but it won't boot and "restart" brings me back to install process...
have repaired disk -- OK -- repaired permissions -- OK. Re-installed and repaired. Peripherals are off or disconnected. Current OS is 10.3.9 on 20 GB HD (device 0)
What now? Would appreciate some guidance. Thank you.
Ali
This is my CPU
Build 7W98
Machine Model: Power Mac G4 (AGP graphics)
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number:

Hi Ali,
re: this open firmware issue, how do you get around it? I really did not understand the support page you link to...but wonder if it is causing me trouble; i.e. shift and other keys do not work. How do I access these keys then?
Is this a Wireless KB you have? Many aren't recognized until after booting.
Hmmm, you've got the firmware Update needed for the AGP to install/use 10.4...
I think I'd try this, worked for me on 3 such macs...
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume, then choose MacOS Extended Journalled, select the Partition tab.
6. Click Erase & look for Security Options. choose Zero 1 pass."
Formatting & Partitioning a Hard Drive in OS X - Tiger and Leopard...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
Hopefully then a fresh install will work.
Oh, what are the Jumper settings on hat drive? Apple recommends Cable Select, but I find different settings work with a dizzying variety of Drive combos.

HELP can't install i-tunes 9

Keep getting message that installer can't remove old version of I-tunes should I uninstall myself or am I opening a can of worms I can't cover back up? And if I should uninstall what should I remove?

Try the following method.
Before you do it might be wise to save copies of iTunes Library.itl and iTunes Library.xml which are in your iTunes fodler. It shouldn't be necessary but you never know..
== uninstall with cleanup ==
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Save the files on your PC.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Help with Re-installing an app through app manager after after accidental uninstalled?

Okay - I've purchased lightroom 4, with the intent to upgrade my creative suite from 5.5 to 6 a week or so ago... Adobe was kind enough to credit me back as at time of upgrade, CS6 was no longer available and lightroom 4 would have been included in my CC membership.
I've installed all the CC apps, and received a weird german email about LR4 intalls... So I uninstalled my current copy of LR4 and went to re-install from the CC app manager... It says that it is already installed and won't let me download it from the site... The trouble is that it isn't really installed anymore, and now I really need to use it... Any help would certainly be appreicated.
Thanks.

If you are using Windows Mahcine then go to control panel and uninstall the lightroom properly from there.
If you are using MAC then go to /Applications/Utilities/Adobe installers and find the uninstaller of lightroom and double click the same to uninstall.
If still you are not able to uninstall the application completly then use CS cleaner tool to uninstall the software. you can download CS cleaner tool from : http://www.adobe.com/support/contact/cscleanertool.html

[SOLVED] need help with virtualbox install

I'm a relative n00b to Arch, haging migrated from Ubuntu (pha!!). Arch rocks!
However, my beloved virtualbox isnt playing ball!
After many hours of getting arch up and running I now need some assitance please with VirtualBox PEUL. I've googled and search these wikis and found:
http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
http://www.mail-archive.com/vbox-users% … 02889.html
http://wiki.archlinux.org/index.php/VirtualBox
but, I dont know how to install.
I used yaourt (having spent another many hours trying to get to speed with what Arch AUR is and yaourt!!)
This is what I did:
1. Visited http://wiki.archlinux.org/index.php/VirtualBox and followed PEUL instructions...
2. Click on AUR link and then click on PKGBUILD and it downloaded a PKGBUILD from here http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
3. Then went back to the wiki http://wiki.archlinux.org/index.php/VirtualBox and clicked on VirtualBox_1.5.6-1_Linux_x86.run and downloaded the file.
4. In accordance with the instructions on the wiki, I ran makepkg
HOWEVER, I get errors!!:
# makepkg --asroot
==> Making package: virtualbox_bin 1.5.6-1 (Thu May 1 20:06:33 BST 2008)
==> WARNING: Running makepkg as root...
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found VirtualBox_1.5.6-1_Linux_x86.run in build dir
-> Found vbox.install in build dir
-> Found vbox_build_module in build dir
-> Found vboxnet.patch in build dir
-> Found interfaces in build dir
==> Validating source files with md5sums...
VirtualBox_1.5.6-1_Linux_x86.run ... FAILED
vbox.install ... Passed
vbox_build_module ... Passed
vboxnet.patch ... Passed
interfaces ... Passed
==> ERROR: One or more files did not pass the validity check!
This is what is in the downloaded files dir:-
ls -l
total 48
-rw-r--r-- 1 daz users 3642 2008-05-01 20:06 PKGBUILD
-rw-r--r-- 1 daz users 26055 2008-05-01 20:05 VirtualBox_1.5.6-1_Linux_x86.run
-rwxrwxrwx 1 nobody nobody 217 2008-01-08 20:58 interfaces
drwxrwxrwx 2 root root 125 2008-05-01 20:06 src
-rwxrwxrwx 1 nobody nobody 2717 2008-02-22 18:22 vbox.install
-rwxrwxrwx 1 nobody nobody 174 2008-02-22 17:45 vbox_build_module
-rwxrwxrwx 1 nobody nobody 2179 2007-12-30 12:31 vboxnet.patch
Can anyone help please? In Ubuntu all this was just installed with dpkg -i VirtualBox.deb
I'm sure Arch is just as "simple" :-)
Last edited by keratos (2008-05-04 07:54:14)

grave wrote:Or try the bin file no problem here yaourt -S virtualbox_bin
Good idea, I checked this out originally but it didnt work so I went for "manual" install.
The download from yaourt never starts, just hangs - the server is dead or something?? ...
# yaourt -S virtualbox_bin
==> WARNING: Building unsupported package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Downloading virtualbox_bin PKGBUILD from AUR...
==> Last 5 comments ordered by date (asc):
Comment by: chris_es on 20080414 [17:02:11]
Hello!
Thanks a lot for this package :o)
Just a quick comment about where to copy the Sun .run package. It should be put to where the tarball from AUR was extracted.
In my case, it is /home/[users]/virtualbox-bin/
Cheers
Chris
Comment by: fi-dschi on 20080419 [22:46:37]
You may download the run-file at
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=innotek-1.5.6-G-F@CDS-CDS_SMI
Comment by: GGLucas on 20080421 [00:40:38]
Can't get the kernel module working in 2.6.25, vbox_build_module completes fine, but I get the following error:
$ sudo modprobe vboxdrv
FATAL: Error inserting vboxdrv (/lib/modules/2.6.25-ARCH/misc/vboxdrv.ko): Unknown symbol in module, or unknown parameter (see dmesg)
with these messages in dmesg:
vboxdrv: Unknown symbol change_page_attr
vboxdrv: Unknown symbol change_page_attr
Comment by: Geekosaurio on 20080422 [03:54:09]
Maybe you could find this instructions helpful
http://www.mail-archive.com/[email protected]/msg02889.html
I've not tried this myself but I will do it soon and post the info here. Maybe create a separate package for 2.6.25 kernels it's a good idea.
Comment by: ise on 20080429 [18:12:57]
The vboxdrv from the mailinglist of virtualbox runs here without problems on 2.6.25 with vbox 1.5.6
First Submitted: Sun, 11 Mar 2007 00:52:22 +0000
Last Updated: Fri, 22 Feb 2008 18:26:15 +0000
virtualbox_bin 1.5.6-1 (Unsupported): Powerful x86 virtualization - binary version (non GPL - free for personal use and evaluation)
==> virtualbox_bin dependencies:
- libidl2 (already installed)
- libxslt (already installed)
- qt3 (already installed)
- e2fsprogs (already installed)
- sdl (already installed)
- libstdc++5 (already installed)
- patch (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> WARNING: This PKGBUILD contains install file that can be dangerous.
vbox.install
==> Edit vbox.install (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of 'virtualbox_bin'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
==> Making package: virtualbox_bin 1.5.6-1 (Fri May 2 06:06:28 BST 2008)
==> WARNING: Running makepkg as root...
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading VirtualBox_1.5.6-1_Linux_x86.run...
--2008-05-02 06:06:29-- http://195.34.175.98/download/1.5.6/VirtualBox_1.5.6-1_Linux_x86.run
Connecting to 195.34.175.98:80...
Last edited by keratos (2008-05-02 05:52:33)

Help with archive & install

Aloha!
I hope someone can help me since I've been searching and reading these discussions all day and haven't found the answer to my problem.
I updated my OS to Leopard 10.5 and began experiencing problems. I did a archive and install back to Tiger 10.4 and now don't know how to restore all the user files in the "previous system folder". I've read the Apple article on restoring after archive and install but I don't understand the whole instructions. I tried creating a new user (with same short name and password) and created a .dmg file of the previous system user folder using disk utility. After copying the files, it doesn't allow me to open the applications. It says I don't have sufficient access privileges. I can't confirm if the file transfer was successful. I'm totally lost and confused. Any help will be appreciated.

Which article was that please?

Need help with PSE11 install

Downloaded PSE11 with Akamai and it will not install.

Akamai download manager shows 2 file links. Both read the same except 1st one shows 11 LS15.7Z and the 2nd shows LS15.exe 1st one appears to download correctly but 2nd one
Says file archive part of Adobe pSE11 is missing and you need all parts in the same folder in order to extract Adobe PSE11. Please download all parts.
Can you help?

Need help with PSE12 install

The files apparently downloaded properly, but during install I get the following error message:
The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue: ElementsAutoAnalyzer.exe.
I'm installing to a Windows XP SP 3 machine with at least 1 gig of ram, and a 1 Tb hard drive that's less than half full, so I don't think it's a hardware issue. I cannot find the named file running anywhere on the machine - anyone run into this?
Help, please! Thanks!
Dyane

Hi,
Please open Task Manager by pressing Ctrl+Shift+Esc. Open "Processes" tab. Make sure you click "Show processes from all users" . Please see ifElementsAutoAnalyzer.exe is shown in the TaskManager. Please close it and then try to install again.
Regards,
Anushree

Desperately Seeking Help with AIR

Hello,
I LOVE my Air and am so dismayed that it is not working for me. Coincidence or not, it all started after Apple fixed my broken hinge. Up till then, it worked perfectly. Here is what's going on.
When I shut my Air down, it will not restart. The drive starts up, spins but the screen never changes from black. I put a snow leopard installation disk into the optional disk drive and re-installed the operating system on to the hard drive. It then boots up and I have the hard drive working with everything that was on it before I did the installation. If i put it to sleep and wake it up, it works. If I shut it down, I am back to where I started. I've reinstalled it 5 times with the same results everytime. But now it starts up and gives me the flashing apple with question mark sign.
What can I do? I would be greatly appreciative of any help. Thank you so much!

Take it back and tell them to fix it or replace it. I will be sending mine back for a full refund this week.
No way am i putting up with all these bugs...won't start...won't wake from sleep....won't charge when off....on a computer of this price.
This will be my first mac returned for a refund since I have been with them these many years, but this machine is bugged and there is no way i am going to live with endless trips to the repair shop only to see things get worse, especially after surgery. APPLE ARE YOU LISTENING?

Seeking help with re-installing I-Tunes

Similar Messages

Maybe you are looking for