Seeking help with windows 7 and Photosmart P1100

I know its an older printer and they arent making updated drivers for it, but is there any work around? Are there some drivers out there that will atleast give me basic print functions back? I can't see buying a new printer when this one works perfect still and prints great. Thank you for your time, any info is appreciated.
This question was solved.
View Solution.

Vyper wrote:
Those arent available in the list.
If these are not showing up go to Add Printer and when the list comes up select "Windows Update". It will take several minutes with no indication of progress, but once it completes there will be many more printers including the Deskjet 970 csi.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Desperately seeking help with recording and playback error messages...

When I attempt to record a single track of audio (either with my internal mic or my Samson USB mic), I get the following message 15 to 30 sec into it:
CoreAudio:
Disk is too slow. (Record)
(-10004)
And when I attempt to playback that single track of a little bit of audio I recorded, I get the following message:
This song has too many instrument tracks to be played in real-time.
I have tried all the steps to solve the problem under "Optimizing Garageband" in the Help menu and nothing has worked.
I would greatly appreciate any suggestions that anyone has as to how I could get rid of these messages and actually enable myself to record a full song at some point in the conceivable future...

I'm guessing that your computer is too slow to record
real-time audio.
Of itself it should be fine - I still use a G3 desktop to record stereo with no problems at all - though GB may add an overhead. Still, this shouldn't be happening.
If you have other tracks playing
while you are recording this could be an issue,
especially if there are a lot playing.
Yes...
If this is the
case then you can lock the tracks playing by pressing
the lock icon.
This won't make any difference to audio tracks, only to MIDI tracks, and in that case it reduces demands on the processor but increases demands on the disk - which appears to be the trouble in the first place.
I agree that you should consider
getting an external hard drive. You can set the
record path to the external hard drive
Since laptop disks are usually slower than external ones this might help - particularly if your internal drive is very full.
which will
free up working memory to your computer.
No it won't, but it will take the strain off the internal disk, if that's what you mean. The memory might be an issue, which would be resolved by installing more RAM if possible.

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

The program shany ip surrvilance Playback.exe version 4.0.7.3 stopped interacting with Windows and was closed

in windows server 2008 r2 running shany ip surveillance
when i want to playback from record file windows encounter error:The program shany ip surrvilance Playback.exe version 4.0.7.3 stopped interacting with
Windows and was closed

Hi Koosha,
You should ask this question on
Windows Forums.
Thanks!
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

The best way help with Windows 10 by Microsoft Call Toll Free – 1-800-745-6302

Windows 10 is now available to customers; we let you know how to get advice and help with Windows 10 Technical Support Phone Number, Windows 10 guidelines, Windows 10 Customer support Number, Microsoft Windows 10 Toll Free Phone Number, Windows 10 instruction, Windows 10 Tips, Windows 10 tutorials, As well as Windows 10 technical support, this is the page about Windows 10 help. Call Us Toll Free Number 1-800-745-6302 http://windows10technicalsupport.com/about-us/

Windows 10 is now available to customers; we let you know how to get advice and help with Windows 10 Technical Support Phone Number, Windows 10 guidelines, Windows 10 Customer support Number, Microsoft Windows 10 Toll Free Phone Number, Windows 10 instruction, Windows 10 Tips, Windows 10 tutorials, As well as Windows 10 technical support, this is the page about Windows 10 help. Call Us Toll Free Number 1-800-745-6302 http://windows10technicalsupport.com/about-us/

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office. Is there a conversion program?

Hi!
Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office. Is there a conversion program?

Making changes to PDF file: Apple Support Communities
Have just noticed this in a thread today. The link from Klaus1's post may allow you to use PDF and work on it. I haven't tried it but it may give you some extra ammunition.

OUTLOOK.EXE version 12.0.6668.5000 stopped interacting with Windows and was closed.

I have an end user whose Outlook 2007 is spontaneously closing. It will enter a 'not responding' state and then shut down (and sometimes relaunch). In going through the event log the following information was obtained. O/S is Win-7, 64-Bit. Any input greatly
appreciated.
The program OUTLOOK.EXE version 12.0.6668.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 14ac
Start Time: 01cf6af126c3ad83
Termination Time: 79
Application Path: C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE
Report Id: c7d7556f-d9dd-11e3-a17c-2cd05a89d710
And further into the Event Log (Application)
- System
- Provider
[ Name] Application Hang
- EventID 1002
[ Qualifiers] 0
Level 2
Task 101
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-05-12T14:03:22.000000000Z
EventRecordID 26088
Channel Application
Computer uswal-3PLSJX1.amer.thermo.com
Security
- EventData
OUTLOOK.EXE
12.0.6668.5000
14ac
01cf6af126c3ad83
79
C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE
c7d7556f-d9dd-11e3-a17c-2cd05a89d710
55006E006B006E006F0077006E0000000000
Binary data:
In Words
0000: 006E0055 006E006B 0077006F 0000006E
0008: 0000
In Bytes
0000: 55 00 6E 00 6B 00 6E 00 U.n.k.n.
0008: 6F 00 77 00 6E 00 00 00 o.w.n...
0010: 00 00 ..

Hi,
The event log in your posting is a general error event which occurs when application stops responding. Please make sure the latest patches and service packs are installed for your Outlook 2007.
Please also restart Outlook in safe mode(Start > Run, type Outlook /safe and Enter) to check whether Outlook 2007 is still not responding or not.
Thanks,
Winnie Liang
TechNet Community Support

HT1349 So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

The latest version of iTunes tends to act up occassionaly. See this support document http://support.apple.com/kb/HT1923 and remove and reinstall iTunes. This will not affect your music library, apps or other content in iTunes. Make sure you follow the steps exactly.
Also, just copying the ringtone will not get it into your phone. iPhone ringtones have an extension of m4r, and you have to first take the Media player file and covert it to an AAC version. From there you need to change the extension from m4a to m4r. If you cannot see file extensions in Windows Explorer, which is actually the default action, go into Organize>Folder and search options, then hit the View tab, and then remove the checkmark by hide file extensions from known file types. After you have created the m4a version and changed the file extension, you can double-click on it and it should show up in the Tones folder in iTunes. From there, sync the phone and it should show up in the list of ringtones.

D20 now only available with Windows and SATA...??

As of this morning, the Lenovo Thinkstation D20 on the US site is only available with Windows and SATA hard drives. It used to have SAS drives and DOS available.
They may just be low on inventory, or maybe... ?
FWIW
JohnV474
Solved!
Go to Solution.

Kind of funny you mention this as a few of my team members and I were digging through the CTO site today. Considering the crazy number of various parts/options that we have qualified for the S/C/D 20 platforms, there are a ton of omissions on the CTO site. I know they pull some various options from time to time because of inventory or end of life concerns, but the configs that were showing up today as available really made no sense. Unfortunately there's not a lot I can do from my side to get this resolved other than raise the complaint. I'll see what I can do though.

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

When Apple solve problems with new iTunes calendar sync with windows and outlook?

When Apple solve problems with new iTunes calendar sync with windows and outlook?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
More Info here...
Apple ID FAQs > http://support.apple.com/kb/HT5622
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I partitioned my apple macbook with windows and mistakenly deleted the apple partition, now i want to restore my system fully to apple. please how can i do that

i partitioned my apple macbook with windows and mistakenly deleted the apple partition, now i want to restore my system fully to apple. please how can i do that

If your MacBook shipped with an install disc you'll have to use that. If it didn't you should be able to use Internet Recovery OS X: About OS X Recovery
EXactly which macbook do you have?

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Seeking help with windows 7 and Photosmart P1100

Similar Messages

Maybe you are looking for