Seeking method to change what is displayed in Filter-- Focal length

When in Bridge under the Filter tab-->Focal length what I have listed is 5mm, 5.8mm, 6mm, 6.2mm, 6.3mm, 6.5mm etc. etc. and the list goes on and on. The conclusion being that this list is way too lo0ng to serve as a good filter to me.
I sold all of my lenses 2 years ago and replaced them with one zoom lens (and at times a pocket camera also with a zoom). I couldn't care less if the photo was taken at 6mm or 6.2mm. To me they are just about the same thing. However, I would like it if it actually game me a range say 5mm-10mm; 10.1 mm-15mm etc. Now the filter makes sense to me being more manageable. Is there any way of making it so?
In other words I no longer want to see:
5.8mm,
6mm,
6.2mm,
6.3mm,
6.5mm
But would like instead to see:
5mm--10mm
10.1mm--15mm
15.1mm--20mm
Which are in increments of 5, BUT, increments of 10 would be fine as well or even better.
Thank you

Doesn't anyone like my question? :-(

Similar Messages

Is it possible to change what is displayed in the GAL in Exchange 2013

We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?

We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?
You can use the Details Template to change what the GAL shows.
http://technet.microsoft.com/en-us/library/jj673049(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Screen Share - Change what to display & video quality

Hi LCSS Team,
I have been playing around with screen share and have it working in collaborative (both ends can share/control their screens).
Upon initial selection of deskop/app/window, is there a way to allow users to change what to display without having to
start/stop?
Use case:
- User A is viewing user B screen. User B would like to change view from desktop to a specific window.
Also, the screen share video feed is very pixelated. I have tried it multiple settings including what you guys sent
me. I am trying to get it to Skype like quality. Is that even possible?
Thanks,
Michael

Hi octoguy,
iChat makes hardware and connection speed checks as it starts up.
This gives you the framerate and bit rate duirng a call.
Lets say that your processor gives your iChat 15 fps
This will be the rate that you will then see to a another Mac.
The same computer is likely to get 10 frames per sec to a PC.
This is some part due to the PC putting a fair amout of effort into producing a clear detailed pic.
On some PCs this setting for the video pic is so high that the audio will drop out completely.
The cure is to bring the PC preview to the front (tabs)
Then click on the small icon that appears to the right and adjusting the slider that appears to the left.
This will incease the frame rate and bit rate from the PC. It makes the video look smoother although the actual quality has gone down (you may not be able to judge this quality difference by eye)
As general rule you will get about 2/3rds of the normal Mac to Mac framerate shown in the Connection Doctor. It also seems to take about 50% more Connection speed to get the same quality video.
So Mac to Mac min is 100Kbps where as Mac to PC will need about 150kbps.
The quality drop from 15 frames a sec to 10 frames a sec does make the video generally more blocky but does also depend a fair bit on the processor power of the PC and the camera used.
I know that sounds a little vague but there are really many variables that can be a factor.
11:23 PM Monday; April 24, 2006

How do i change what is displayed when i open a new tab?

When i open a new tab it automatically comes up with Yahoo search engine in the new tab. I want change this to a google search tab. How do i do that?

Opening Yahoo in a new tab is caused by a Yahoo related extension, possibly net assistant. To stop it going to Yahoo you can uninstall that extension.
For an option to open new tabs to a site of your choosing, you can use the NewTabURL extension - https://addons.mozilla.org/firefox/addon/newtaburl/

HT2589 How do I change what is displayed when I rate an app?

The name that shows up is not my Apple ID and I cannot find anywhere to edit this information but it shows up on all reviews that I write.

Hello er-apple,
Thank you for the details of the issue you are experiencing with the name displayed when writing reviews. It sounds like you need to update your Nickname for your Apple ID.
You can update this by going to the Store menu in iTunes on your computer. Select Store > View My Apple ID, and from there, you will see your account information. Near the bottom, you will see a Settings section which will list your Nickname; click Edit to the right of Nickname and update it to the name you would like to use.
iTunes 11 for Mac: Manage your iTunes Store account
http://support.apple.com/kb/PH12299
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thank you for using Apple Support Communities.
Best,
Sheila M.

Variable to display topics changes what it displays

I am using a template that someone else created. It's designed to set the topic titles using the $$DisplayTopicTitle$$ and an 'Execute advanced action" to Set Topic Title. The published Cap 4 mod publishes fine. Each slide has a Next, Back and a Menu button. Moving through it the first time it looks good-although you can see the variable for a micro second before it draws the topic title to the top of the page.
The slow draw time is a drag-maybe I could live with it. But when I hit the Back button, all the titles just display 'true'. I don't understand either of these issues. Am I doing sonething wrong?
Thanks in advance!
JT

Hi there
One thing you might wish to try would be to click Edit > Preferences > Project > Publish Settings and configure for AS3.
This should help the momentary flash, but I'm not sure about the "True" you are seeing.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Is there a way to change what reads on the browser tab?

Hello,
I'm a bit of a noob at using Muse and right now i'm building interactive demo. One request from clients is to change what is displayed on the browser tab - they want tab to display demo name instead of the individual page names.
Is it possiblbe to do that with muse, or do i have to export HTML out of it and manually changing title tag?
thank you,
-Katya

Hello,
You can change the Page title by going into Page properties.
- Right Click on the page and click on page properties.
- Click on Metadata at the top in Page properties Window.
- Now uncheck the option "Same as Page Name" and put in the title under Page Title.
Please have a look at the screenshot which might help :
Regards,
Sachin

Muvo slim,What is displayed in window and does it use windows explorer drag and drop to trans

Im about to buy a muvo slim and already own a zen xtra.Does muvo slim allow for recharge using plug accessory I got with my zen or can i only charge using usb cord and computer?What is displayed in screen and can i use drag and drop transfer method from windows explorer?Finally can i use the mediasource 3.20 softwear update i now use with my zen or must i input different mediasource version for slim than one i use with the zen? thanks matt

mattg3 wrote:
Im about to buy a muvo slim and already own a zen xtra.Does muvo slim allow for recharge using plug accessory I got with my zen or can i only charge using usb cord and computer?
It charges via its USB socket, so you can't use the Xtra's power supply.
What is displayed in screen and can i use drag and drop transfer method from windows explorer?
It works as a flash dri've, so appears as a dri've letter in Windows Explorer.
Finally can i use the mediasource 3.20 softwear update i now use with my zen or must i input different mediasource version for slim than one i use with the zen? thanks matt
Go to Nomadworld.com downloads and you'll see the Slim listed there with MediaSource and the MuVo plugin.

Im trying to connect to apps store and to download apps but i cannt. the massege that say me is your payment method was declined. what can i do about this?

im trying to connect to apps store and to download apps but i cannt. the massege that say me is your payment method was declined. what can i do about this?

Try removing said card then re-enter all card details, if still no joy then try a different card to see if it is the card or a problem with your iTunes account, one other thing that you could try is changing your iTunes password as this sometimes cure thing as well.
Also have a look at your purchase history to see if you have any items that are still waiting for payment as this can sometimes screw up your payment method, if this is the case then I would defiantly try a different card.
If none of the above work then I would contact iTunes support.

Using the onClick method to change a default text into a CFTEXTAREA

Hi,
I am trying to use the simple following method to change the
value of a Textarea field when the internet user click into the
field:
<cftextarea name="fYourMessage" label="Your Message: "
onclick="if(this.value=='You can use this text field to push a
personal message for your friend.')this.value='';">You can use
this text field to push a personal message for your
friend.</cftextarea>
But I have no effect at all using that method! I think I am
missing a knowledge about using CFFORM in a Flash method
(format="flash") were it might be not possible to use JavaScript in
the way I want it.
In any case, if somebody understand what I am trying to do
and have some information for me, please let me know! I am sure it
is simple to resolve this!

Hi,
Sorry misunderstood the question previously, you should probably use the Embed or Object tag of Html to send FlashVars to the flex application. I just googled and got some links.
http://kb2.adobe.com/cps/164/tn_16417.htmlhttp://www.mediacollege.com/adobe/flash/actionscript/flashvars.html
http://www.mediacollege.com/adobe/flash/actionscript/flashvars.html
Hope this helps.

LPA Reporting iView - Can we configure or change the table display?

Hi all...
We are using the Reporting Launchpad in MSS. It is using the LPA reporting application to display an employee selection for headcound reports, etc. The table lists employee, id, and 'P'. It is limited to 5 entries. Is there any configuration change this table display?

Hi 640,
I just checked it. You cant do it directly in Answers (the css property for the PTCOL2 is going to be the same and I'm not sure how you could assign different div id for it without going through source files). What you could do is create 2 pivot table views and put them side by side in Compound view. Might be tricky, but possible.

What are Displays?

Hello,
Sorry to bother you again with my simples questions. I checked on the documentation before asking and didn't find an answer. So can anyone tell me what are "Displays"? I find them in the Logical Model, the Relational Model and the different Subviews...
In [this document|http://download.oracle.com/docs/cd/E18464_01/doc.30/e15802.pdf] , I didn't find anything relevant describing its purpose.
Thanks in advanse,

Hello,
displays allow to represent the same set of objects in different way - you can play with diagram and objects options in order to express better your ideas. You can change color for objects (in particular display), can change notation, details level (and size) ...
Philip

My calendar date is not automatically changing, what's the proper setting?

My calendar date is not automatically changing, what's the proper setting?

If the population of the ObservableList (independent of any UI considerations takes a long time, then you probably want to do the populations off the JavaFX application thread (e.g. via a javafx.concurrent.Task)).
If you do populate the list in a Task, standard threading cautions apply in terms of not updating items in the scene graph off the JavaFX application thread and ensuring that the system is absent of race conditions, etc.
Look over the documentation of http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Cell.html and that may help you.
The JavaFX controls such as ListView have been carefully designed to exhibit high performance even when backed by extremely large lists (through the concept of virtualization explained in the Cell documentation). For example, if the backing list is updated but the portion of the list being updated is not within the currently displayed list contents, (I would hope) the update would be very efficient.

HT201210 ipod touch gen2 white screen , ive tried everything apple says to try ,still no change,what am i supposed to do now

ive tried everything apple says to try ,still no change,what am i supposed to do now

See Display Shows White Screen Here
http://support.apple.com/kb/TS2771
If that does not work... try letting the battery fully drain.
Then Charge for an Hour and try the Reset again.

I would change the language displayed in the login window from u.s. to german

I would change the language displayed in the login window from u.s. to german in Lion (Mac OS X 10.7.2).
I use
sudo "/System/Library/CoreServises/Language Chooser.app/Contens/MacOS/Language Chooser"
Then I enter my admin password and choose german. It doesn't work
Then I use
sudo languagesetup
Then I enter my admin password and type 4 for german. It doesn't work
Still I habe the language u.s. at the login windows.
In the terminal appears following message:
System Language set to: German
2012-01-06 16:18:43.401 languagesetup[311:707] Warning: NSBundle NSBundle </System/Library/CoreServices/Language Chooser.app> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
What shell I do? Can you help me??

I found the solution!
One of the User in my MacBookPro was saved with an old version of FileVault. I deaktivated this old FileVault and aktivate the new FileVault and the language of the login Windows is sudenly german!

Seeking method to change what is displayed in Filter-- Focal length

Similar Messages

Maybe you are looking for